MAX3243ECPW
MAX3243ECPW - 500kbps RS-232 Transceiver | Texas Instruments
The Texas Instruments MAX3243ECPW is a 3 V to 5.5 V multichannel RS-232 line driver and receiver capable of operation at 500 kbps, with three drivers, five receivers, and a 28-pin TSSOP package. Its serial-port pins provide ±15 kV ESD protection for HBM, IEC 61000-4-2 air-gap discharge, and ±8 kV IEC 61000-4-2 contact-discharge conditions. The device also includes a dual charge-pump circuit that converts the supply into the bipolar voltage required by RS-232 line drivers.
An RS-232 transceiver is an interface IC that converts logic-level signals from a host or controller into RS-232-compatible levels, while receiving and converting remote RS-232 signals back into CMOS-compatible logic. The MAX3243E belongs to the RS-232 interface family within the broader interface-IC and semiconductor hierarchy. Its three-driver, five-receiver arrangement supports asymmetrical data flows, such as a PC serial port receiving five incoming lines while transmitting on three lines.
Key features include a 3 V to 5.5 V supply range, 500 kbps operation, three RS-232 drivers, five RS-232 receivers, and enhanced ESD protection on the serial connections. The 500 kbps capability makes the device suitable for legacy serial peripherals, industrial controllers, data-acquisition equipment, and embedded systems that still use RS-232 links. The five receivers also allow multiple status or handshake inputs without requiring additional transceiver channels.
The integrated charge-pump architecture generates the positive and negative voltage swings required by the RS-232 interface while allowing operation from a single low-voltage supply. The MAX3243E meets the requirements of TIA/EIA-232-F. Control functions support low-power interface management, and the device is intended for systems that require a compact multichannel solution rather than several separate single-channel transceivers.
Typical applications include industrial serial controllers, laboratory data loggers, programmable instrumentation, point-of-sale systems, security equipment, and embedded control boards. In these systems, the device can connect a microcontroller or UART to a DB9, RJ45-based, or board-level RS-232 connector. Selection should account for signal polarity, automatic shutdown requirements, cable length, and the electrical protection requirements of the connected port.
Place the charge-pump capacitors and interface bypass capacitors close to their designated pins, and route driver outputs and receiver inputs away from sensitive digital clocks. Keep the RS-232 connector-side traces away from low-level analog inputs to minimize capacitive coupling. Confirm the exact connector mapping, enable polarity, and shutdown behavior against the manufacturer datasheet before finalizing a new PCB.
This page combines manufacturer specifications, lifecycle information, package details, and application-oriented guidance for engineers assessing the MAX3243ECPW as a multichannel RS-232 interface. The MAX3243ECPW is marked no longer in production by Texas Instruments, so lifecycle planning and sourcing continuity are central considerations for new and legacy designs.
詢價
聯絡我們