CP2102N-A01-GQFN28R vs CP2101R 比較
詳細並排比較 CP2102N-A01-GQFN28R 由 Silicon Labs 與 CP2101R 由 Silicon Labs. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ 啟用中規格比較
| 參數 | CP2102N-A01-GQFN28R | CP2101R |
|---|---|---|
| 品牌 | Silicon Labs | Silicon Labs |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | USB to UART Bridge Controller | USB-to-UART bridge controller |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| 資料速率 | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | — |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | — |
| 工作溫度 | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| 封裝 | 28-QFN (5x5 mm) with exposed pad | 28-MLP (5 x 5 mm) |
| 安裝類型 | Surface Mount | — |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| MSL 等級 | MSL3 (per JEDEC J-STD-020) | — |
| RoHS 狀態 | Compliant | unknown |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| USB Interface | — | USB 2.0 |
| 供應電壓 | — | 3 V to 3.6 V |
| Serial Interface | — | UART |
| Protocol | — | USB |
| Case / Package | — | 28-VFQFN exposed pad |
| Packaging | — | Cut Tape (CT) |
| Interface Function | — | USB 2.0 UART interface |
| Device Category | — | I/O controller interface IC |
| USB Speed | — | [DATA_NEEDED: USB operating speed] |
| Maximum UART Data Rate | — | [DATA_NEEDED: maximum UART baud rate] |
| UART Signal Levels | — | [DATA_NEEDED: UART signal-level specification] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| 熱阻 | — | [DATA_NEEDED: exposed-pad thermal resistance] |