MW4IC2230MBR5 vs MW4IC2230NBR1 比較
詳細並排比較 MW4IC2230MBR5 由 NXP Semiconductors 與 MW4IC2230NBR1 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
NXP Semiconductors
MW4IC2230NBR1 - 30W W-CDMA RF Power Amplifier, 1.6-2.4 GHz | NXP
MW4IC2230NBR1 Obsolete規格比較
| 參數 | MW4IC2230MBR5 | MW4IC2230NBR1 |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 類別 | RF Amplifiers | RF Amplifiers |
| 生命週期狀態 | Obsolete | Obsolete |
| Manufacturer | NXP Semiconductors (formerly Freescale) | — |
| Part Type | RF LDMOS Wideband Integrated Power Amplifier | — |
| Frequency Range | 1.6 GHz to 2.4 GHz | 1.6 GHz to 2.4 GHz (usable); 2110-2170 MHz target band |
| Output Power (Pout) | 30 W (CW) | — |
| Power Gain | 31 dB (typical) | — |
| Supply Voltage (Vdd) | 26 V nominal | — |
| Quiescent Current (Idq) | 60 mA | — |
| Technology | LDMOS (Laterally Diffused MOSFET) | LDMOS (High Voltage, multi-stage integrated) |
| 封裝 / 外殼 | TO-272 WB-16 Variant, Flat Leads (over-molded plastic) | — |
| 安裝類型 | Surface Mount (with heatsink) | Surface / chassis mount via flange |
| Operating Mode | Class AB (typical) | — |
| Supported Air Interfaces | Cellular, CDMA, EDGE, GSM, TDMA, W-CDMA | — |
| Input Matching | Internal wideband matching network | — |
| RoHS 狀態 | [DATA_NEEDED: rohs status] | [DATA_NEEDED: RoHS / lead-free status from NXP product page] |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| MSL 等級 | [DATA_NEEDED: MSL level] | — |
| Test Frequency | — | 2.14 GHz |
| Supply Voltage (Drain) | — | 26 V to 28 V |
| Supply Current (Quiescent) | — | 60 mA nominal |
| Small-Signal Gain | — | 31 dB typical |
| Output Power (P1dB / Pout) | — | [DATA_NEEDED: P1dB / saturated Pout at W-CDMA] |
| Power Added Efficiency | — | [DATA_NEEDED: PAE typical] |
| Modulation Support | — | W-CDMA, CDMA, EDGE, GSM, TDMA |
| Input Impedance | — | 50 ohm (internally matched) |
| 封裝 | — | TO-272 WB-16 (over-molded plastic, flange mount) |
| Maximum Operating Temperature | — | 85 C |
| 腳位數 | — | 16 |
| Application | — | Cellular base-station RF power amplifier |
| Lead Configuration | — | Flat leads (TO-272-16 Variant) |