SN75176BDR vs SP485E 比較

詳細並排比較 SN75176BDR 由 Texas Instruments 與 SP485E 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN75176BDR SN75176BDR - 8-Pin RS-485/RS-422 Transceiver | TI

SN75176BDR - 8-Pin RS-485/RS-422 Transceiver | TI

SN75176BDR ✓ 啟用中

規格比較

參數 SN75176BDR SP485E
品牌 Texas Instruments MaxLinear
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Differential bus transceiver —
供應電壓 5 V —
Supported Standards TIA/EIA-422-B and TIA/EIA-485-A —
ITU Recommendations V.11 and X.27 —
Communication Mode Bidirectional —
Bus Architecture Multipoint transmission —
Transmission Line Type Balanced transmission lines —
Driver Output State 3-state —
Receiver Output State 3-state —
工作溫度範圍 0 °C to 70 °C [DATA_NEEDED: operating temperature]
封裝 SOIC (D), 8 pins 8-pin NSOIC or PDIP
安裝類型 Surface mount Surface Mount (NSOIC) or Through-Hole (PDIP)
腳位數 8 pins —
Manufacturer Texas Instruments —
RoHS 狀態 [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Maximum Data Rate [DATA_NEEDED: maximum data rate] —
Input and Output Electrical Limits [DATA_NEEDED: input and output electrical limits] —
Propagation Delay [DATA_NEEDED: propagation delay] —
靜態電流 [DATA_NEEDED: quiescent current] —
功能 — Transceiver
Protocol — RS-485, RS-422
Number of Drivers/Receivers — 1/1
Duplex — Half-duplex
資料速率 — 2.5 Mbps (max, SP485E non-slew-limited)
Supply Voltage (VCC) — 4.75 V to 5.25 V
Receiver Input Sensitivity — ±200 mV
Receiver Input Impedance — 12 kΩ minimum, 15 kΩ typical
Common-Mode Range — −7 V to +12 V
ESD Protection (HBM) — ±15 kV
ESD Protection (IEC 61000-4-2 Air Discharge) — ±15 kV
Process Technology — BiCMOS
Failsafe Receiver — Yes (open, shorted, idle bus)
Tri-State Enable Pins — Yes (DE, RE)

資料表與資源

瀏覽所有產品 建立 BOM 索取報價