EP3C5M164I7N - Cyclone III FPGA 5136 LE 164-MBGA | Intel
MPN： EP3C5M164I7N ✓ 啟用中EP3C5M164I7N 概覽
An FPGA (Field Programmable Gate Array) is a reprogrammable digital logic IC that lets engineers implement arbitrary logic, DSP, and memory subsystems by configuring an array of configurable logic blocks (CLBs) connected through a programmable interconnect fabric. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) -> programmable logic -> digital ICs -> semiconductors. They are distinct from ASICs because they are not mask-programmed: configuration is loaded from external flash at power-up, enabling fast prototyping and field updates. Cyclone III belongs to Intel's (formerly Altera's) low-cost, low-power FPGA family targeting cost-sensitive volume applications rather than high-performance transceivers.
Key differentiating features include the Cyclone III family's industry-leading low static and dynamic power for a 60 nm FPGA, 4-Mbit embedded memory blocks for buffer/RAM-intensive designs, dedicated hardware multipliers that accelerate DSP operations up to 18x18, and a flexible I/O bank structure supporting LVDS, SSTL, HSTL, and LVCMOS standards. The M164 Micro BGA footprint reduces board area versus TQFP packages while still enabling low-cost PCB fabrication with 0.5 mm pitch.
Architecturally, the device arranges logic elements into LABs (Logic Array Blocks), each containing 16 LEs, with M9K memory blocks distributed throughout the fabric. The configuration controller supports passive serial (PS), fast passive parallel (FPP), and active serial (AS) modes via industry-standard EPCS configuration devices. Periphery includes four general-purpose PLLs with spread-spectrum clocking, and each I/O bank has its own VREF pins for reference-voltage-based standards.
Typical applications include industrial motor control and machine vision, low-cost video processing and display controllers, consumer electronics glue logic, and telecom line-card interface bridges. The Cyclone III is also widely used in education and prototyping kits (such as the Altera/Intel DE0-Nano family) because of its favorable price-per-logic-element ratio.
When designing with the EP3C5M164I7N, ensure your Quartus II project sets the correct device package (M164) and speed grade (7) so timing analysis is accurate, and provide a low-noise 1.2 V core supply with bulk decoupling near each VCCINT pin. For multi-bank I/O standards, segregate SSTL/HSTL banks from LVCMOS banks using separate VCCIO rails to avoid contention.
This page consolidates Cyclone III family datasheet parameters, drop-in 164-MBGA alternatives, and design notes that go beyond the standard manufacturer datasheet to help engineers select and qualify the part quickly.
直接替換替代品，適用於 EP3C5M164I7N — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EP3C5M164I7N （相同外形與佔位） — 差異在於 Package, Process Technology, Embedded Memory, Total Memory Bits, PLLs.
EP3C5M164C7N
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EP3C5M164I8N
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
EP3C10M164I7N
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
EP3C5M164I7
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EP3C5M164C8N
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EP3C5M164I7N 最大額定值與電氣特性
| Logic Elements (LE) | 5136 |
| Embedded Memory | 423936 bits (approx. 414 Kbit) |
| Embedded Multipliers | 23 x 18x18 |
| User I/O Pins | 106 |
| 封裝 | 164-TFBGA (Micro BGA, M164, 8x8 mm) |
| Core Voltage (VCCINT) | 1.2 V |
| Speed Grade | 7 |
| Temperature Grade | Industrial (-40C to +100C junction) |
| Process Technology | 60 nm TSMC low-k |
| PLLs | 2 |
| 安裝類型 | Surface Mount |
| Ball Pitch | 0.5 mm |
| Configuration Modes | PS, FPP, AS |
| External Memory Support | DDR, DDR2, SDR, QDRII+ SRAM |
| I/O Standards | LVDS, SSTL, HSTL, LVCMOS |
| RoHS 狀態 | Compliant |
| 工作接面溫度 | -40C to +100C |
EP3C5M164I7N 164-tfbga (micro bga, m164, 8x8 mm) 腳位配置指南
EP3C5M164I7N（164-tfbga (micro bga, m164, 8x8 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EP3C5M164I7N.
請參閱 資料表 以查看完整腳位配置。
典型應用
EP3C5M164I7N 適用於 6 應用s: Industrial Motor Control, Machine Vision and Video Processing, Telecom Line-Card Interface Bridge, Consumer Electronics Glue Logic, Education and FPGA Prototyping Kits, Portable Medical Instrumentation.
Industrial Motor Control
The EP3C5M164I7N fits industrial motor control because its 5,136 logic elements and 23 embedded 18x18 multipliers can implement field-oriented control (FOC) and PID loops in hardware, while 106 user I/O pins interface with encoders, Hall sensors, and PWM gate drivers. The 1.2 V core keeps dynamic power low, and the industrial temperature grade (-40C to +100C junction) supports harsh factory floors. In a typical design, the FPGA generates complementary PWM with dead-time insertion and reads quadrature encoder signals through LVDS or LVCMOS I/O banks. Unlike a microcontroller, it can run multiple control loops in parallel with deterministic nanosecond timing, but it requires external ADC and gate-driver ICs, adding BOM cost and board area.
推薦
Machine Vision and Video Processing
The EP3C5M164I7N suits low-cost machine vision and video processing because its 423,936 bits of embedded RAM buffer image lines, and the 23 hardware multipliers accelerate convolution and edge-detection filters. The 106 I/O pins can connect to CMOS image sensors and LCD panels, while dedicated DQS pins support DDR2 frame buffers. In a typical pipeline, the FPGA captures parallel video data, applies 3x3 Sobel or Gaussian kernels, and outputs to a display controller. The trade-off versus a dedicated ISP or GPU is lower throughput and limited memory bandwidth, but the FPGA offers deterministic latency and lower power for embedded vision at moderate resolutions such as 720p.
推薦
Telecom Line-Card Interface Bridge
The EP3C5M164I7N is used as a telecom line-card interface bridge because its flexible I/O banks support LVDS, SSTL, and HSTL standards needed to interface with backplane transceivers and framers. The 5,136 logic elements implement protocol conversion, FIFO buffering, and clock-domain crossing, while the 2 PLLs generate and clean up line-rate clocks. In a typical line card, the FPGA bridges a parallel telecom bus to a serial backplane link and manages status registers. The limitation is that Cyclone III lacks high-speed SerDes, so multi-gigabit serial links require external SERDES devices, increasing component count compared with Cyclone IV GX or Arria families.
推薦
Consumer Electronics Glue Logic
The EP3C5M164I7N serves as programmable glue logic in consumer electronics because it replaces multiple discrete logic ICs with a single reconfigurable device, reducing board area and BOM count. Its 106 I/O pins handle level shifting, bus arbitration, and peripheral expansion, while the 1.2 V core and 60 nm process keep power low enough for bus-powered devices. In a typical design, the FPGA interfaces a main SoC to sensors, buttons, and LEDs, and can be reprogrammed in the field to fix bugs or add features. The trade-off is higher unit cost than fixed-function logic and the need for configuration flash, but flexibility and faster time-to-market often justify it.
推薦
Education and FPGA Prototyping Kits
The EP3C5M164I7N is widely used in education and prototyping because its 5,136 logic elements are large enough for teaching digital design, CPU cores, and DSP labs, yet small enough to fit low-cost boards. The 164-MBGA package with 0.5 mm pitch is challenging for hand soldering but standard for machine-assembled development kits such as the DE0-Nano family. Students can implement soft processors like Nios II, experiment with PLL clocking, and interface to external SRAM or sensors. The main limitation is the BGA package, which requires reflow soldering and makes breadboard prototyping impractical without a carrier board.
推薦
Portable Medical Instrumentation
The EP3C5M164I7N fits portable medical instrumentation because its low 1.2 V core power extends battery life, and its 23 multipliers accelerate filtering and FFT for ECG, ultrasound, and pulse-oximetry signal chains. The 106 I/O pins interface with ADCs, DACs, and display modules, while the industrial temperature grade supports clinical environments. In a typical design, the FPGA acquires sampled data, applies digital filters, and drives a small LCD. The trade-off versus a dedicated medical AFE plus MCU is higher development effort and the need for rigorous verification, but the FPGA provides deterministic real-time processing and can be updated without hardware changes.
推薦
推薦產品摘要
工程參考資料，適用於 EP3C5M164I7N — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EP3C5M164C7N | EP3C5M164I8N | EP3C10M164I7N | EP3C5M164I7 |
|---|---|---|---|---|---|
| Package | 164-TFBGA (M164) | 164-TFBGA (M164) - same | 164-TFBGA (M164) - same | 164-TFBGA (M164) - same | 164-TFBGA (M164) - same |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 5136 | 5136 | 5136 | 10320 | 5136 |
| Embedded Memory | 423936 bits | 423936 bits | 423936 bits | 423936 bits | 423936 bits |
| User I/O Pins | 106 | 106 | 106 | 106 | 106 |
| Speed Grade | 7 | 7 | 8 | 7 | 7 |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +85C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) |
| RoHS | Compliant | Compliant | Compliant | Compliant | Non-compliant (leaded) |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
主要差異化特點
- Industrial temperature grade in same footprint (對比EP3C5M164C7N)
- Speed grade 7 timing performance (對比EP3C5M164I8N)
- Lower cost and power at 5K LE density (對比EP3C10M164I7N)
- RoHS-compliant lead-free construction (對比EP3C5M164I7)
設計說明
Provide a clean 1.2 V core supply (VCCINT) with at least 100 uF bulk capacitance and 0.1 uF decoupling per VCCINT ball. Cyclone III devices are sensitive to core voltage ripple; keep ripple below 50 mV peak-to-peak to avoid timing violations. Use separate VCCIO rails per I/O bank when mixing SSTL/HSTL and LVCMOS standards to prevent contention. Estimated: at 1.2 V and typical 100 mA core current, core power is about 120 mW, but dynamic power scales with clock frequency and toggle rate.
The 164-ball Micro BGA (M164) has 0.5 mm ball pitch, requiring via-in-pad or dog-bone fanout with 0.1 mm trace/space design rules. Use at least a 4-layer stackup with a solid ground plane directly under the device to control impedance and thermal spreading. Place configuration flash (EPCS device) close to the FPGA to minimize configuration trace length and signal integrity issues. Follow Intel's Cyclone III board design guidelines for decoupling and layer stackup.
Ensure the Quartus II project device setting matches M164 package and speed grade 7; a mismatch causes incorrect timing analysis and potential field failures. Do not leave unused I/O pins floating - configure them as tri-stated with weak pull-up or as outputs driving low per Intel recommendations. Verify that the configuration scheme (PS, FPP, or AS) matches the board's flash and control signals, and always include a JTAG header for debugging and in-system programming.
合規資訊
RoHS compliance indicated by the N suffix in the part number. REACH, halogen-free, and conflict-minerals status not stated in the provided data.
