EP3SL340F1517I3 - Stratix III L FPGA, 337500 LEs, 1517-FBGA | Intel
MPN： EP3SL340F1517I3 ⚠ 最後購買機會| 數量 | 單價 | 小計 |
|---|---|---|
| 1 | $21833.5 | $21,833.50 |
| 5 | $21500 | $107,500.00 |
| 10 | $21050 | $210,500.00 |
| 25 | $20100 | $502,500.00 |
| 100 | $18900 | $1,890,000.00 |
EP3SL340F1517I3 概覽
An FPGA (Field-Programmable Gate Array) is a semiconductor device built around a matrix of configurable logic blocks (CLBs), dedicated DSP blocks, embedded memory blocks, and high-speed serial transceivers, all interconnected by a programmable routing fabric. Within the broader hierarchy, FPGAs sit alongside microcontrollers, microprocessors, DSPs, and ASICs as reconfigurable digital logic devices that can be customized after manufacture for a specific application. The Stratix III family is engineered for high-throughput DSP, packet processing, and ASIC-prototyping workloads.
Key differentiating features of the EP3SL340F1517I3 include up to 13,500 adaptive logic modules (ALMs) and 576 DSP blocks, supporting high-speed memory interfaces such as DDR3 and QDR II+, plus 4 PLLs for clock management. The device includes 976 user I/O pins distributed across 24 I/O banks, supporting a wide range of single-ended and differential I/O standards (LVDS, LVTTL, LVCMOS, SSTL, HSTL) for board-level flexibility.
Architecturally, the Stratix III L series introduces an 8-input ALM, dedicated hardware multipliers, and a hardened memory interface that together raise DSP throughput to thousands of GMACS. The 65 nm process node and 1.1 V core keep dynamic power lower than the previous Stratix II generation while preserving the device's high logic capacity, making the part suitable for systems where millions of gates are needed without a full ASIC mask cycle.
Typical applications include high-speed digital signal processing, ASIC prototyping, telecom baseband processing, high-end video and image processing pipelines, and military/aerospace signal intelligence. The 1517-BGA package provides ample I/O for memory-rich designs.
When designing with this device, ensure your PCB incorporates the required decoupling network and that the FPGA configuration scheme (e.g., AS, PS, JTAG) is selected correctly. Use the Altera Quartus II toolchain for synthesis, place-and-route, and timing closure.
This page synthesizes distributor pricing, same-family Stratix III drop-in alternatives, and practical FPGA design notes not consolidated on any single distributor or manufacturer page.
直接替換替代品，適用於 EP3SL340F1517I3 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EP3SL340F1517I3 （相同外形與佔位） — 差異在於 Package, Operating Temperature, Speed Grade, Mounting Type, Adaptive Logic Modules (ALMs).
快速比較工具 — 選擇替代零件進行並排比較：
EP3SL340F1517C4N
聯絡詢價
查看資料表 →EP3SL340F1517C4LN
聯絡詢價
查看資料表 →EP3SL340F1517C4L
聯絡詢價
查看資料表 →EP3SL340F1517C4
聯絡詢價
查看資料表 →EP3SL340F1517C3N
聯絡詢價
查看資料表 →EP3SL340F1517C3
聯絡詢價
查看資料表 →EP3SL340F1517C2N
聯絡詢價
查看資料表 →EP3SL340F1517C2
聯絡詢價
查看資料表 →EP3SL340F1517I3 最大額定值與電氣特性
| Family | Stratix III L |
| Logic Elements | 337500 |
| Adaptive Logic Modules (ALMs) | 13500 |
| Total Memory Bits | 18822144 |
| DSP Blocks | 576 |
| User I/O Pins | 976 |
| Number of I/O Banks | 24 |
| Number of PLLs | 4 |
| 工作溫度 | -40C to +100C (Industrial) |
| Core Voltage | 1.1 V |
| Process Technology | 65 nm CMOS |
| Maximum Operating Frequency | 500 MHz |
| 封裝 | 1517-BBGA, FCBGA (Flip-Chip) |
| 安裝類型 | Surface Mount |
| Configuration Method | AS / PS / JTAG (per Stratix III family) |
| Temperature Grade | I (Industrial) |
| Speed Grade | 3 |
EP3SL340F1517I3 1517-bbga, fcbga (flip-chip) 腳位配置指南
EP3SL340F1517I3（1517-bbga, fcbga (flip-chip) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EP3SL340F1517I3.
請參閱 資料表 以查看完整腳位配置。
典型應用
EP3SL340F1517I3 適用於 6 應用s: High-Performance ASIC Prototyping, Telecom Baseband Processing, High-End Video and Image Processing, Military / Aerospace Signal Intelligence, High-Speed Memory Interface Bridging, Test and Measurement Instrumentation.
High-Performance ASIC Prototyping
The EP3SL340F1517I3's 337,500 logic elements and 18.8 Mbit of embedded block memory make it a strong fit for ASIC prototyping where full RTL visibility is required before committing to a mask cycle. Quartus II synthesis directly maps large ASIC RTL designs onto the Stratix III L fabric, and the 576 DSP blocks let designers verify high-throughput arithmetic paths. The 976 user I/O pins across 24 banks also enable direct fan-out to memory interfaces and external test fixtures. Compared with smaller FPGAs, this part reduces the need for multi-FPGAs partitioning when emulating ASICs of 20-30 million gates.
推薦
Telecom Baseband Processing
The EP3SL340F1517I3 fits telecom baseband designs because of its 576 DSP blocks, support for DDR3/QDR II+ external memory interfaces, and 4 PLLs for multi-rate clocking. The 1517-FCBGA package exposes enough I/O for parallel ADC/DAC interfaces and CPRI/OBSAI links. Industrial -40C to +100C temperature grade supports outdoor base-station cabinets. Compared with Stratix II, the Stratix III L family halves dynamic power at iso-throughput, easing thermal budgets in sealed enclosures.
推薦
High-End Video and Image Processing
The EP3SL340F1517I3 supports high-end video pipelines because of its abundant DSP blocks (576), 18.8 Mbit of fast on-chip memory for line buffering, and 24 I/O banks that allow multiple camera/display interfaces to coexist. Industrial temperature grade supports surveillance and medical-imaging enclosures. Designers can implement real-time 4K processing, multi-channel SDI bridging, or computer-vision pre-processing directly in fabric. Quartus II DSP Builder accelerates model-based design of FIR/FFT cores.
推薦
Military / Aerospace Signal Intelligence
The EP3SL340F1517I3 is well matched to signal-intelligence (SIGINT) and electronic-warfield (EW) systems thanks to its industrial -40C to +100C temperature range, large logic capacity, and high DSP throughput. Designers can build wideband receivers, FFT-based channelizers, and adaptive beam-formers in a single device. The 65 nm Stratix III process is mature for long-lifecycle defense programs, and Altera/Intel has published military-temperature variants (EP3SE/EP3SL extended screening) for higher-grade applications.
推薦
High-Speed Memory Interface Bridging
The EP3SL340F1517I3 supports bridging between DDR3, QDR II+, RLDRAM II, and legacy memory interfaces because of its hardened memory controllers and 4 PLLs for multi-rate clocking. The 976 user I/O across 24 banks expose enough pins for multi-port memory bridges used in networking line cards and high-performance compute. Industrial temperature grade supports network switches and storage controllers. Quartus II IP catalog includes drop-in memory-interface IP for rapid development.
推薦
Test and Measurement Instrumentation
The EP3SL340F1517I3 is suitable for high-end test instruments because of its high logic density, 576 DSP blocks for digital down-conversion, and 976 I/O for parallel ADC/DAC interfacing. Industrial temperature grade supports bench-top and field-portable instruments. Designers can build arbitrary waveform generators, real-time spectrum analyzers, and protocol analyzers. Quartus II Qsys enables rapid system-integration for instrument control and DSP pipelines.
推薦
推薦產品摘要
此產品無常見問題。
工程參考資料，適用於 EP3SL340F1517I3 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EP3SL340F1517C4N | EP3SL340F1517C3N | EP3SL340F1517C2N |
|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 1517-BBGA, FCBGA | 1517-BBGA, FCBGA - same | 1517-BBGA, FCBGA - same | 1517-BBGA, FCBGA - same |
| Logic Elements | 337500 | 337500 | 337500 | 337500 |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) |
| Speed Grade | 3 | 4 (faster) | 3 (same) | 2 (slower) |
| User I/O Pins | 976 | 976 | 976 | 976 |
| DSP Blocks | 576 | 576 | 576 | 576 |
| Embedded Memory Bits | 18822144 | 18822144 | 18822144 | 18822144 |
主要差異化特點
- Industrial temperature grade (-40C to +100C) (對比EP3SL340F1517C3N)
- Speed grade 3 vs faster C4 variant (對比EP3SL340F1517C4N)
- 1517-FCBGA package with 976 user I/O (對比EP3SL200H780I3 (780-pin package))
設計說明
Estimated: the Stratix III L EP3SL340F1517I3 requires multiple supply rails (VCCINT 1.1 V, VCCIO 1.2-3.3 V per bank, VCCPD, VCCAUX, VCCBAT). Decoupling per Intel/Altera guidelines is mandatory: place 0.1 uF and 0.01 uF capacitors within 50 mil of every VCC pin, plus bulk 22 uF tantalum or ceramic at each rail entry. Use a sequenced power supply (e.g., LM3880 or equivalent) to enforce VCCINT-before-VCCIO-before-VCCPD ordering. Power estimation via Quartus II PowerPlay is required prior to thermal closure.
The 1517-BGA flip-chip package requires a heatsink or thermal pad solution for typical industrial workloads. Estimated: at full resource utilization (337,500 LEs at ~70% toggle rate), junction power can reach 15-20 W. Use a properly sized heatsink with thermal interface material (TIM) and ensure adequate airflow. Theta_JA on the 1517-FCBGA without heatsink is approximately 8-12 C/W; combined with PCB copper pours (inner ground planes) this typically allows 5-8 W dissipation. Above that, active cooling is required.
The 1517-ball FCBGA package uses 1.0 mm pitch with daisy-chained ground/return vias. Per Intel/Altera routing guidelines, route all signal traces on outer layers with via-in-pad recommended; use microvia stack-ups (4-6-4 or higher layer count). Match-impedance for LVDS (100 ohm differential) and DDR3 (50 ohm SE, 100 ohm diff). Keep critical clocks and high-speed transceivers on inner stripline layers with continuous reference planes.
Common pitfalls: (1) Do not skip configuration-mode strapping on MSEL pins - incorrect MSEL prevents JTAG/AS/PS configuration. (2) Use proper JTAG chain ordering (TDI->TDO) when multiple devices are cascaded. (3) Ensure all unused I/O banks are powered (VCCIO and VCCPD) even if no I/O is assigned, or set them to 'tri-stated with weak pull-up' in Quartus II. (4) Verify SERDES reference-clock jitter if using transceivers. (5) Last-time-buy parts may have non-availability of design support - lock IP early.
合規資訊
RoHS and lead-free per Stratix III family documentation. Not AEC-Q100 qualified (industrial-grade FPGA, not automotive). Halogen-free status not explicitly stated in verified web data.
