EPM7160SQC160-10N - 160 Macrocells MAX 7000S CPLD, 10ns, PQFP-160
MPN： EPM7160SQC160-10N ✗ 停產EPM7160SQC160-10N 概覽
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell arrays on a single chip with a programmable interconnect matrix. Positioned in the taxonomy as programmable logic -> PLD -> CPLD -> MAX 7000S family, the EPM7160SQC160-10N sits between simple PAL/GAL devices and larger FPGAs, offering instant-on EEPROM technology, deterministic timing, and 5V tolerant I/O. The MAX 7000S series uses Altera's second-generation MAX architecture with the Classic IEEE Std 1149.1 JTAG interface for in-system programming (ISP).
Key features include 3,200 usable gates, 160 macrocells, 10 ns tPD (pin-to-pin delay), 167 MHz maximum internal frequency, 5.0V VCCINT, in-system programmability via JTAG, and open-drain / programmable I/O standards. The architecture provides four dedicated inputs per macrocell, a global clock network, and a programmable power-saving mode that reduces standby current by up to 50 percent when the device is idle.
Typical applications include bus decoding and address mapping in 5V legacy systems, glue-logic replacement for multiple discrete TTL/CMOS gates, peripheral controllers (UART, FIFO, DMA), state machines for motor control front-ends, and I/O expansion in 8051/MCS-51 embedded designs. The 160-pin PQFP package provides ample I/O for wide data buses and parallel interfaces.
This page synthesizes distributor pricing (as of 2026-09-13), drop-in MAX 7000S alternatives, and practical design notes for the EPM7160SQC160-10N that are not aggregated on any single manufacturer or distributor page.
直接替換替代品，適用於 EPM7160SQC160-10N — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EPM7160SQC160-10N （相同外形與佔位） — 差異在於 Operating Temperature, Package, Family, Supply Voltage (VCCINT), Usable Gates.
EPM7160SQC160-10
✅ 直接替換聯絡詢價
查看資料表 →EPM7160EQC160-15
✅ 直接替換📋 參考替代品（不在目錄中）
EPM7160EQC160-12
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EPM7160EQC160-20
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
EPM7160SQC160-15
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
EPM7160SQC160-10N 最大額定值與電氣特性
| Family | MAX 7000S |
| Macro Cells | 160 |
| Usable Gates | 3,200 |
| Logic Elements / Blocks | 10 Logic Array Blocks (LABs) |
| User I/O Pins | 104 |
| Pin-to-Pin Delay (tPD) | 10 ns |
| Maximum Internal Frequency | 167 MHz |
| Counter Speed (fCNT) | 100 MHz |
| Supply Voltage (VCCINT) | 5.0 V |
| In-System Programmability | Yes (JTAG IEEE 1149.1) |
| 工作溫度 | 0 C to 70 C (Commercial) |
| 封裝 | PQFP-160 (SQC) 31.2 x 31.2 mm |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Non-Compliant (Pb-bearing PQFP) |
| Memory Technology | EEPROM |
EPM7160SQC160-10N pqfp-160 (sqc) 31.2 x 31.2 mm 腳位配置指南
EPM7160SQC160-10N（pqfp-160 (sqc) 31.2 x 31.2 mm 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EPM7160SQC160-10N.
請參閱 資料表 以查看完整腳位配置。
典型應用
EPM7160SQC160-10N 適用於 6 應用s: 5V Legacy Bus Decoder and Address Mapping, Glue Logic Replacement for Discrete TTL/CMOS Gates, Peripheral Controllers (UART, FIFO, DMA), Industrial State Machines for Motor-Control Front-Ends, I/O Expansion for 8051/MCS-51 Embedded Designs, Custom Bus Arbiters and Interrupt Controllers.
5V Legacy Bus Decoder and Address Mapping
The EPM7160SQC160-10N fits 5V legacy bus-decoding applications because its 5.0V VCCINT and 5V-tolerant I/O eliminate the need for level shifters when interfacing with classic TTL peripherals, microcontrollers, and memory buses. Its 160 macrocells and 104 user I/O pins provide ample logic capacity to decode 24-bit or wider address ranges, generate chip-select signals for multiple peripherals, and implement wait-state insertion logic in a single device. The 10 ns tPD ensures that address-to-CS propagation remains well within ISA bus timing margins.
推薦
Glue Logic Replacement for Discrete TTL/CMOS Gates
The EPM7160SQC160-10N replaces multiple discrete 74-series TTL and CMOS logic packages in retro-computing and industrial-control applications. With 160 macrocells, designers can integrate 10-20 standard logic functions (multiplexers, latches, encoders, parity generators) into one CPLD, reducing PCB area, BOM cost, and assembly complexity. The 5V supply and PQFP-160 surface-mount package suit retro ISA-bus and VMEbus boards where 5V tolerance is mandatory and leaded PQFPs survive hand-solder rework.
推薦
Peripheral Controllers (UART, FIFO, DMA)
The EPM7160SQC160-10N suits peripheral-controller implementations such as custom UARTs, FIFO buffers, and DMA engines in embedded motherboards and test instruments. Its 167 MHz internal counter frequency and 10 ns combinatorial delay allow 100 MHz+ serial-baud generation and reliable state-machine sequencing for high-throughput DMA. The 104 user I/O pins accommodate 8/16-bit parallel FIFOs plus handshake/status flags, while JTAG ISP supports in-field firmware updates for production diagnostic boards.
推薦
Industrial State Machines for Motor-Control Front-Ends
The EPM7160SQC160-10N serves industrial state-machine front-ends for stepper and BLDC motor-control boards where deterministic logic timing is required. Its EEPROM-based non-volatile configuration eliminates external boot memory and supports instant-on operation within 200 ms of power-up. The commercial 0 C to 70 C temperature range covers most factory-floor enclosures, and 5V I/O directly drives opto-isolated gate drivers and encoder inputs without additional buffering.
推薦
I/O Expansion for 8051/MCS-51 Embedded Designs
The EPM7160SQC160-10N expands I/O in 8051/MCS-51-based embedded designs by providing 104 5V-tolerant user I/O pins accessible via memory-mapped registers. The CPLD decodes upper address lines and converts slow 8051 port operations into parallel multi-bit I/O cycles. With 10 ns tPD, address-to-output latency fits within standard 8051 MOVX timing without wait-state insertion. This pattern is common in legacy industrial controllers, security panels, and point-of-sale terminals still in production.
推薦
Custom Bus Arbiters and Interrupt Controllers
The EPM7160SQC160-10N implements custom multi-master bus arbiters and interrupt controllers in VMEbus, Multibus, and proprietary backplane designs. With 160 macrocells, designers can encode priority logic, daisy-chain arbiters, and vectored interrupt tables in one device. The 5V supply matches legacy backplane signaling, and JTAG ISP allows late-stage priority-table updates during integration. The PQFP-160 package provides enough I/O for 32-bit data plus 16-bit arbitration/control signals with margin.
推薦
推薦產品摘要
工程參考資料，適用於 EPM7160SQC160-10N — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EPM7160SQC160-10 | EPM7160EQC160-15 | EPM7160EQC160-12 | EPM7160EQC160-20 | EPM7160SQC160-15 |
|---|---|---|---|---|---|---|
| Package | PQFP-160 (SQC) | PQFP-160 (SQC) - same | PQFP-160 (SQC) - same | PQFP-160 (SQC) - same | PQFP-160 (SQC) - same | PQFP-160 (SQC) - same |
| Brand | Intel (formerly Altera) | Intel - same | Intel - same | Intel - same | Intel - same | Intel - same |
| Family | MAX 7000S | MAX 7000S - same | MAX 7000E | MAX 7000E | MAX 7000E | MAX 7000S - same |
| Macro Cells | 160 | 160 | 160 | 160 | 160 | 160 |
| Pin-to-Pin Delay (tPD) | 10 ns | 10 ns | 15 ns | 12 ns | 20 ns | 15 ns |
| Usable Gates | 3,200 | 3,200 | 3,200 | 3,200 | 3,200 | 3,200 |
| User I/O | 104 | 104 | 104 | 104 | 104 | 104 |
| Supply Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
主要差異化特點
- Pin-to-pin timing 33% faster than -15 grade siblings (對比EPM7160SQC160-15)
- MAX 7000S in-system programmability via JTAG (對比EPM7160EQC160-15 (MAX 7000E))
- Largest I/O count in EPM7160 PQFP-160 family (對比EPM7128SQC160-10N)
設計說明
The EPM7160SQC160-10N requires a single 5.0V supply (VCCINT) with recommended tolerance of +/- 5% per the MAX 7000S datasheet. Decouple each VCC/VCCIO pair with a 0.1 uF ceramic capacitor placed within 5 mm of the package pin, plus a 10 uF tantalum bulk capacitor near the supply entry point. The device draws approximately 100-300 mA depending on logic utilization and toggle rate; provision for a 500 mA supply is recommended to handle in-rush during ISP programming.
Estimated: at 50% macrocell utilization, 100 MHz toggle rate, and 5V supply, the EPM7160SQC160-10N dissipates approximately 0.5-1.0 W. The PQFP-160 package has theta_JA of approximately 40 C/W (typical for leaded PQFP), giving a junction temperature rise of 20-40 C above ambient. Commercial temperature range (0 C to 70 C) is satisfied in standard office and industrial environments without active cooling. For enclosed chassis, verify theta_JC and derate if ambient exceeds 50 C.
Route JTAG signals (TDI, TDO, TMS, TCK) with short traces (< 50 mm) and avoid parallel routing with high-speed switching signals to prevent programming errors. The PQFP-160 package requires a 31.2 x 31.2 mm footprint with 0.65 mm pitch gull-wing leads; use a PCB land pattern compliant with IPC-7351 nominal-density standards. Reserve a 4-pin header for the JTAG download cable (ByteBlasterMV or USB-Blaster) accessible from the board edge.
Do not confuse the EPM7160SQC160-10N (PQFP-160, 160 macrocells) with the EPM7160SLC84-10 (PLCC-84, 64 macrocells) - these are NOT pin-compatible despite sharing the EPM7160 prefix. Always verify the package suffix (SQC = PQFP-160, SLC = PLCC-84, ELC = PLCC-84, SLI = PLCC-84 industrial) before PCB layout. Also note that MAX 7000S is 5V-only and is not compatible with 3.3V MAX II designs without a level-shifting interface.
合規資訊
PQFP-160 package contains lead-bearing solder finish (non-RoHS). Reach SVHC compliance per Intel material declarations. AEC-Q100 not applicable - this is a commercial-grade CPLD. Choose MAX II EPM570 for new RoHS-compliant designs.
