EPM9560RI210-15 - MAX 9000 CPLD 560 Macrocell | Altera
MPN： EPM9560RI210-15 ✗ 停產EPM9560RI210-15 概覽
A CPLD (Complex Programmable Logic Device) is a programmable logic IC built from an array of macrocells connected by a programmable interconnect matrix. Unlike an FPGA, a CPLD stores its configuration in non-volatile EEPROM/flash, is instantly active at power-up, and offers deterministic, fixed timing. In the logic hierarchy, a CPLD sits between simple PLDs (PAL/GAL) and FPGAs, and belongs to the broader programmable logic device (PLD) and semiconductor IC categories. The MAX 9000 family uses Altera's FastTrack Interconnect and MultiVolt I/O, allowing 5.0 V core operation with 3.3 V-compatible I/O.
Key features of the EPM9560RI210-15 include 560 macrocells organized into 20 logic array blocks (LABs), 12,000 usable gates, 164 user I/O pins, and a 15 ns pin-to-pin delay (the -15 speed grade). The device supports in-system programmability (ISP) via the JTAG boundary-scan interface, enabling field upgrades without removing the part from the board. Its 210-pin RQFP package provides a high I/O-to-package ratio for dense backplane and bus-interface designs.
The MAX 9000 architecture routes signals through a continuous FastTrack Interconnect, giving predictable, skew-controlled timing that simplifies static timing analysis. Each macrocell contains a programmable flip-flop with individual clock, clear, and preset control, supporting both registered and combinatorial logic. The EEPROM configuration retains its programmed state for over 20 years and is immune to single-event upsets, making the device suitable for industrial control and instrumentation.
Typical applications include PCI and VME bus bridging, industrial automation controllers, telecommunications line-card glue logic, test-and-measurement instrumentation, and legacy system replacement where instant-on operation and deterministic timing are required. The 5.0 V core and MultiVolt I/O simplify interfacing to both 5 V and 3.3 V peripherals.
When designing with the EPM9560RI210-15, note that the device is a mature, legacy MAX 9000 part; verify availability and consider pin-compatible MAX 9000 variants in the same 210-pin RQFP footprint for supply continuity. Provide adequate decoupling and follow Altera's recommended power-up sequencing for reliable ISP operation.
This page synthesizes distributor availability, drop-in MAX 9000 alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for replacement and lifecycle decisions.
直接替換替代品，適用於 EPM9560RI210-15 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EPM9560RI210-15 （相同外形與佔位） — 差異在於 Package, In-System Programmability, User I/O Pins, Usable Gates, Family.
EPM9560RC210-15
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
EPM9560RC210-20
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EPM9560RC240-15
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EPM9560RC208-15
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EPM9560RC304-15
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EPM9560RI210-15 最大額定值與電氣特性
| Family | MAX 9000 (EPM9560) |
| Device Type | Complex Programmable Logic Device (CPLD) |
| Macrocells | 560 |
| Usable Gates | 12,000 |
| Logic Array Blocks (LABs) | 20 |
| User I/O Pins | 164 |
| Pin-to-Pin Delay (tPD) | 15 ns (-15 speed grade) |
| Supply Voltage (VCCINT) | 5.0 V |
| I/O Voltage (MultiVolt) | 3.3 V / 5.0 V compatible |
| Configuration Memory | EEPROM (non-volatile) |
| In-System Programmability | Yes (JTAG ISP) |
| JTAG Boundary Scan | IEEE 1149.1 compliant |
| 封裝 | 210-pin RQFP (PowerQuad) |
| 工作溫度 | Industrial (-40C to +85C) |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | ROHS3 Compliant |
| 濕度敏感等級 (MSL) | 3 (168 Hours) |
| Manufacturer Standard Lead Time | 1-7 Days (distributor stock) |
EPM9560RI210-15 210-pin rqfp (powerquad) 腳位配置指南
EPM9560RI210-15（210-pin rqfp (powerquad) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EPM9560RI210-15.
請參閱 資料表 以查看完整腳位配置。
典型應用
EPM9560RI210-15 適用於 6 應用s: PCI Bus Bridging, Industrial Automation Controller, Telecommunications Line Card Glue Logic, Test and Measurement Instrumentation, Legacy System Replacement, Backplane Interface Logic.
PCI Bus Bridging
The EPM9560RI210-15 fits PCI bus-bridging designs because its 164 user I/O pins and 560 macrocells provide sufficient logic and I/O to implement bus-interface glue, address decoding, and handshake state machines. Its 15 ns pin-to-pin delay and deterministic FastTrack Interconnect timing meet the fixed-latency requirements of PCI transactions, while the 5.0 V core with MultiVolt 3.3 V I/O simplifies interfacing to both legacy 5 V and modern 3.3 V peripherals. Placed between the host bridge and peripheral slots, the CPLD handles protocol translation and wait-state generation. Unlike an FPGA, it is instantly active at power-up from EEPROM, avoiding configuration latency during bus enumeration.
推薦
Industrial Automation Controller
The EPM9560RI210-15 suits industrial automation controllers because its industrial -40C to +85C temperature rating and non-volatile EEPROM configuration ensure reliable operation in factory environments without a configuration PROM. The 560 macrocells implement PLC-style state machines, encoder interfaces, and safety interlocks, while the 164 I/O pins connect directly to sensors, relays, and motor-driver logic. Its 15 ns pin-to-pin delay provides deterministic response for time-critical control loops. Because the configuration is retained for over 20 years and is immune to single-event upsets, the device recovers instantly from power interruptions. Designers typically pair it with opto-isolated inputs and relay drivers on the field side.
推薦
Telecommunications Line Card Glue Logic
The EPM9560RI210-15 is used in telecommunications line cards for glue logic because its 560 macrocells and 164 I/O pins consolidate multiple discrete logic functions into one device, reducing board area and component count. It implements clock-domain handshakes, FIFO control, and backplane interface logic with the deterministic 15 ns timing required for TDM and SONET line-card designs. The 5.0 V core with MultiVolt I/O allows direct connection to both 5 V and 3.3 V line-card components. Instant-on EEPROM configuration eliminates the boot delay of SRAM-based FPGAs, which is critical for line cards that must be operational immediately after power restoration.
推薦
Test and Measurement Instrumentation
The EPM9560RI210-15 fits test-and-measurement instrumentation because its deterministic 15 ns pin-to-pin delay and fixed FastTrack Interconnect timing allow precise, repeatable signal generation and capture. The 560 macrocells implement trigger logic, pattern generators, and counter/timer functions, while the 164 I/O pins interface to ADCs, DACs, and front-panel controls. Non-volatile EEPROM configuration means the instrument is ready immediately at power-up, with no FPGA configuration sequence. The industrial temperature range supports benchtop and rack-mount instruments operating in varied environments. Designers often use the JTAG ISP interface to update measurement algorithms in the field without removing the device.
推薦
Legacy System Replacement
The EPM9560RI210-15 is frequently selected for legacy system replacement because it preserves the original MAX 9000 architecture, pinout, and 5.0 V logic levels, allowing drop-in replacement of obsolete EPM9560 devices without PCB redesign. Its 560 macrocells and 164 I/O pins match the original logic capacity, and the 15 ns speed grade maintains existing timing margins. Because the configuration is stored in EEPROM, the replacement device can be programmed with the original JEDEC file using the same JTAG interface. This minimizes requalification effort for long-lifecycle industrial, medical, and aerospace systems where redesign is prohibitively expensive.
推薦
Backplane Interface Logic
The EPM9560RI210-15 suits backplane interface logic because its 164 user I/O pins can drive and receive the wide parallel buses typical of VME, CompactPCI, and proprietary backplanes. The 560 macrocells implement address decoding, arbitration, and bus-transceiver control, while the 15 ns pin-to-pin delay supports the tight setup and hold windows of high-speed backplane protocols. The 5.0 V core provides robust noise margins on long backplane traces, and MultiVolt I/O allows mixed 5 V/3.3 V card populations. Instant-on EEPROM configuration ensures the interface is active before the system controller begins bus enumeration, avoiding arbitration deadlock.
推薦
推薦產品摘要
工程參考資料，適用於 EPM9560RI210-15 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EPM9560RC210-15 | EPM9560RC210-20 | EPM9560RC240-15 | EPM9560RC208-15 |
|---|---|---|---|---|---|
| Package | 210-pin RQFP | 210-pin RQFP - same | 210-pin RQFP - same | 240-pin RQFP - different | 208-pin RQFP - different |
| Brand | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 560 | 560 | 560 | 560 | 560 |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 |
| Pin-to-Pin Delay (tPD) | 15 ns | 15 ns | 20 ns | 15 ns | 15 ns |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) |
| Supply Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Configuration Memory | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) |
主要差異化特點
- Industrial temperature grade in the 210-pin RQFP footprint (對比EPM9560RC210-15)
- Faster -15 speed grade (對比EPM9560RC210-20)
- Higher I/O density than smaller RQFP variants (對比EPM9560RC208-15)
設計說明
Decouple every VCCINT and VCCIO pin with a 0.1 uF ceramic capacitor placed as close to the pin as possible, plus at least one 10 uF bulk capacitor per power rail. The MAX 9000 EPM9560 draws transient current during macrocell switching; inadequate decoupling causes ground bounce and unreliable EEPROM configuration. Follow Altera's recommended power-up ramp and keep VCCINT within the 5.0 V +/- 5% tolerance specified in the MAX 9000 datasheet.
Route the JTAG signals (TCK, TMS, TDI, TDO) as short, matched traces with a solid ground return, and keep TCK away from high-speed I/O to avoid clocking spurious states during in-system programming. Place the JTAG header close to the device and add a pull-up on TMS and a pull-down on TCK per Altera ISP guidelines. The 210-pin RQFP requires a thermal land pattern; follow the package drawing in the MAX 9000 datasheet for the exposed pad and solder-mask dimensions.
Do not assume the EPM9560RI210-15 is pin-compatible with other EPM9560 package variants: the 208-pin, 240-pin, and 304-pin RQFP options have different land patterns and I/O counts despite identical 560-macrocell logic. Confirm the exact package suffix (I210) before substituting. Also verify the speed grade, since a -20 part has a 20 ns pin-to-pin delay versus 15 ns for the -15 grade, which can violate timing in existing designs.
合規資訊
Distributor fpgalink lists the EPM9560RI210-15 as ROHS3 Compliant with MSL 3 (168 hours). REACH, halogen-free, and conflict-minerals status were not stated in the verified web data and are marked unknown.
