STMicroelectronics

LM2902AWYPT - 1.3MHz Quad Op Amp, 14-TSSOP | STMicroelectronics

MPN: LM2902AWYPT ✓ 啟用中
800 V Vdss 375 µA Id 14-TSSOP Package
MOQ: 1 |

LM2902AWYPT 概覽

STMicroelectronics LM2902AWYPT is a low-power, general-purpose quad operational amplifier with four push-pull amplifier channels, a 1.3 MHz gain-bandwidth product, 100 dB common-mode rejection, and a 14-TSSOP package. It is designed for compact analog signal-conditioning systems that require four amplifiers in one package. The manufacturer identifies the device as a low-power quad operational amplifier for instrumentation and general-purpose amplifier applications.

An operational amplifier is a high-gain, high-impedance differential amplifier whose closed-loop behavior is determined mainly by external feedback components. The quad LM2902A configuration places four independent amplifiers in one package, reducing component count and board area compared with four separate single or dual amplifier packages. In the broader semiconductor hierarchy, an operational amplifier is an analog IC, a signal-conditioning IC, and part of the wider linear and mixed-signal semiconductor family.

Key electrical attributes include a 1.3 MHz gain-bandwidth product, 100 dB common-mode rejection, and 375 µA typical quiescent current. The input bias-current figures listed for this device are 20 nA and 2 nA for different operating conditions, while its stated withstand voltage is 800 V. These characteristics make the LM2902AWYPT suitable for low-frequency instrumentation, sensor interfaces, transducers, and general feedback-control circuits where four amplifier channels can share a common supply architecture.

The push-pull output stage supports bidirectional output current without the crossover distortion commonly associated with older single-ended output designs. Each amplifier can implement non-inverting, inverting, summing, difference, comparator-style, or active-filter configurations when operated within its electrical limits. Independent channels allow one package to serve several signal paths, although each channel requires correct feedback and decoupling arrangements to prevent unintended oscillation or channel interaction.

Typical uses include low-frequency sensor conditioning, process-control instrumentation, current-voltage conversion, sample-and-hold circuitry, audio preamplification, active filtering, and general-purpose differential amplification. Four channels in one 14-TSSOP package can be especially useful in sensor nodes where several measurements must be conditioned before conversion or control. The package also supports compact mixed-signal boards where conserving board area is more important than very high slew rate or rail-to-rail input and output operation.

Designers should begin with the pin-description table and typical application circuits in the STMicroelectronics datasheet. Place the supply bypass capacitor close to the device, keep feedback-loop routing compact, and route each output only to its assigned load. Confirm that input and output common-mode voltages remain within the amplifier's permitted operating range and that source and load impedances preserve stability with the selected feedback network.

This product page consolidates the exact manufacturer-listing attributes, package information, commercially available replacement data, and application guidance for LM2902AWYPT. It also distinguishes verified electrical characteristics from parameters that require confirmation in the full manufacturer datasheet, helping engineers plan sourcing and circuit design with fewer documentation conflicts.

直接替換替代品,適用於 LM2902AWYPT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2902AWYPT (相同外形與佔位) — 差異在於 Gain-Bandwidth Product, Package.

Texas Instruments
Gain-Bandwidth Product: 1.2 MHz
Package: 14-pin TSSOP
比較對象 LM2902AWYPT →

LM2902WYPT

✅ 直接替換
STMicroelectronics
📦 14-TSSOP
4 amplifiers · Low-power quad operational amplifier · 1.3 MHz · 100 dB · 375 uA · 20 nA · 2 nA · 800 V

聯絡詢價

查看資料表 →

LM2902KPWR

✅ 直接替換
Texas Instruments
📦 14-TSSOP
4 amplifiers · General-purpose operational amplifier · 26 V · 1.2 MHz · 2 kV · -40 °C to +125 °C · Single-supply operation · Internally frequency compensated

聯絡詢價

查看資料表 →

LM2902AWYPT 最大額定值與電氣特性

Product Type Low-power quad operational amplifier
Number of Amplifier Channels 4 circuits
Gain-Bandwidth Product 1.3 MHz
Common-Mode Rejection 100 dB
靜態電流 375 µA
Input Bias Current 20 nA
Input Offset Current 2 nA
Withstand Voltage 800 V
輸出類型 Push-pull
Application Classification General-purpose amplifier
封裝 14-TSSOP
安裝類型 Surface mount
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

LM2902AWYPT 14-tssop 腳位配置指南

LM2902AWYPT(14-tssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LM2902AWYPT 的 14-tssop 封裝腳位圖

無詳細腳位定義資料: LM2902AWYPT.

請參閱 資料表 以查看完整腳位配置。

典型應用

LM2902AWYPT 適用於 6 應用s: Industrial Sensor Signal Conditioning, Precision Difference Amplifier, Low-Frequency Active Filtering, Process-Control Error Amplifier, Audio Preamplifier, Battery-Powered Instrumentation.

🏭

Industrial Sensor Signal Conditioning

The LM2902AWYPT is well suited to conditioning several low-frequency industrial sensor signals because it combines four general-purpose amplifier channels, a 1.3 MHz gain-bandwidth product, and 100 dB common-mode rejection in one 14-TSSOP package. Channels can implement instrumentation, difference, summing, or buffer stages around resistive sensors. Common-mode rejection helps suppress an offset or interference component that is common to both sensor inputs. The 375 µA quiescent current also reduces the standing current demand of multi-channel measurement circuits. Confirm the operating common-mode range, output swing, and sensor excitation level before implementation.

🔧

Precision Difference Amplifier

A pair of LM2902AWYPT channels can form a difference amplifier for rejecting common-mode voltage in bridge, current-loop, or sensing applications. The listed 100 dB common-mode rejection is the principal reason to select this device when the desired differential signal is small compared with a shared input voltage. The remaining two channels can provide output filtering or gain stages without adding another quad package. Since the device is not specified as rail-to-rail, verify input common-mode limits and output swing across the complete supply range used by the bridge sensor.

📡

Low-Frequency Active Filtering

The LM2902AWYPT can implement first- and second-order low-frequency active filters when the required closed-loop bandwidth remains comfortably below its 1.3 MHz gain-bandwidth product. Four channels permit a filter followed by gain and buffer stages, reducing the number of amplifier packages in a compact analog board. Care should be taken to keep op-amp noise, gain error, and slew behavior compatible with the filter's frequency and amplitude requirements. Use the manufacturer's typical application circuits and stability guidance when choosing resistor and capacitor values around each amplifier channel.

🏭

Process-Control Error Amplifier

The LM2902AWYPT can implement the error amplifier and supporting conditioning functions in a low-frequency process-control loop. Its 1.3 MHz gain-bandwidth product provides useful closed-loop bandwidth for slow industrial control systems, while four channels can handle error amplification, sensor conditioning, filtering, and actuator-signal preparation. The 375 µA quiescent current is attractive for distributed low-power control nodes. Designers must account for output-swing limits when driving a control input and should verify stability with the compensation network and plant load used in the final control topology.

🎧

Audio Preamplifier

The LM2902AWYPT can provide low-frequency audio preamplification when the application does not require rail-to-rail operation or very high slew rate. Its four channels allow a stereo input stage, headphone or line-output driver, and an additional monitoring or filtering path to share a package. The push-pull output stage supports bidirectional output current, while the 1.3 MHz gain-bandwidth product covers audio-band signal paths. Confirm the maximum load current, output-voltage swing, noise requirements, and stability into the intended audio load before using the device in a production signal path.

🔋

Battery-Powered Instrumentation

The LM2902AWYPT is suitable for low-power instrumentation because its listed 375 µA quiescent current limits the no-load demand of four integrated amplifier channels. Engineers can use the channels for front-end amplification, active filtering, level shifting within the valid common-mode range, and output buffering. The 14-TSSOP package reduces board area compared with separate multi-amplifier packages. For battery systems, calculate the complete operating current including feedback-divider current and load demand, then confirm that shutdown requirements, if any, are satisfied by the control strategy rather than an assumed power-down function.

What is the LM2902AWYPT?
The LM2902AWYPT is a low-power, general-purpose quad operational amplifier from STMicroelectronics, with four push-pull amplifier channels in a 14-TSSOP package. According to the STMicroelectronics product listing, it combines a 1.3 MHz gain-bandwidth product, 100 dB common-mode rejection, and 375 µA quiescent current. Its four-channel arrangement is useful for instrumentation, sensor conditioning, filtering, and general analog signal-processing designs.
What are the key specifications of LM2902AWYPT that engineers should know?
The LM2902AWYPT provides four op-amp channels, a 1.3 MHz gain-bandwidth product, 100 dB common-mode rejection, and 375 µA quiescent current in a 14-TSSOP package. The STMicroelectronics listing also identifies a push-pull output stage and lists input bias-current values of 20 nA and 2 nA. Engineers should consult the manufacturer datasheet for supply voltage, common-mode limits, offset voltage, slew rate, and temperature limits before finalizing a design.
What is the pinout of LM2902AWYPT?
The LM2902AWYPT uses a 14-TSSOP package containing four operational-amplifier channels, but a complete numbered pin list is not reproduced on the available manufacturer product page. Use the pin-description table and package drawing in the STMicroelectronics datasheet when assigning input, output, supply, and ground connections. The package includes an exposed pad if the selected ordering variant includes one, so its electrical connection must be checked against the exact datasheet rather than inferred from the generic TSSOP outline.
Where can I download the LM2902AWYPT datasheet PDF?
The LM2902AWYPT datasheet can be obtained through the STMicroelectronics product and documentation links on the official product page. The manufacturer describes the component as a low-power quad operational amplifier and provides its ordering information for the 14-TSSOP version. For design work, use the complete manufacturer datasheet to confirm electrical limits, pin assignments, test conditions, soldering information, and package dimensions rather than relying only on a distributor summary.
Is LM2902AWYPT suitable for sensor signal conditioning?
Yes, the LM2902AWYPT is suitable for low-frequency sensor signal conditioning because it combines four channels with 1.3 MHz gain-bandwidth, 100 dB common-mode rejection, and a 375 µA quiescent current. The common-mode rejection specification is valuable when a sensor signal is small relative to an offset or common-mode input. The four-channel package can support instrumentation amplifiers, difference amplifiers, filters, and buffer stages, subject to the datasheet's common-mode and output-swing limits.
Can LM2902AWYPT be used for active filters and audio preamplification?
Yes, the LM2902AWYPT can implement active filters and low-frequency audio preamplifier stages when the required gain and bandwidth remain within its limits. Its 1.3 MHz gain-bandwidth product supports moderate-bandwidth closed-loop amplifier networks, while the four independent channels allow several filter or preamplifier functions to share one package. Check output-current capability, slew rate, output swing, noise, and stability with the intended feedback network and load before production use.
What is the difference between LM2902AWYPT and LM2902WYPT?
Both parts are STMicroelectronics general-purpose quad operational amplifiers offered in a 14-TSSOP package, and both are listed with a 1.3 MHz gain-bandwidth product. The ordering codes indicate different device variants, but the available product information does not establish every temperature-grade or qualification difference. Treat LM2902WYPT as a closely related candidate, then verify the exact electrical limits, grade markings, and datasheet ordering information before approving it as a drop-in replacement.
LM2902AWYPT vs LM2902WYPT: which variant should I choose?
Choose LM2902AWYPT when its ordering-code grade matches the environmental and qualification requirements of the target design; choose LM2902WYPT when that ordering variant is specifically approved for the same application. Both are 14-TSSOP general-purpose quad op amps with a listed 1.3 MHz gain-bandwidth product, so the decision should not rely on package or headline bandwidth alone. Compare operating-temperature limits, supply range, qualification status, offset and bias-current limits, and lifecycle availability in the manufacturer documentation.
When should I choose LM2902AWYPT over a quad precision amplifier?
Choose LM2902AWYPT when four general-purpose, low-frequency amplifier channels are needed in one 14-TSSOP package and the listed 1.3 MHz bandwidth is sufficient. Its 375 µA quiescent current also supports power-conscious designs. Select a precision or rail-to-rail amplifier instead when the application requires lower offset voltage, rail-to-rail input/output operation, higher slew rate, lower noise, or tighter channel matching than this device provides.
Is LM2902AWYPT suitable for industrial control equipment?
The LM2902AWYPT can be evaluated for industrial control equipment when its supply, temperature, common-mode, output-swing, and qualification specifications satisfy the system requirements. Its four channels are useful for sensor inputs, error amplifiers, filters, and actuator-signal conditioning within a single package. For safety- or automotive-critical installations, confirm AEC-Q100 status or other required approvals directly with STMicroelectronics rather than inferring qualification from the ordering code or general-purpose product classification.
What is the best drop-in replacement for LM2902AWYPT?
LM2902WYPT is the closest documented drop-in candidate because STMicroelectronics lists it as a 14-TSSOP general-purpose quad operational amplifier with the same 1.3 MHz gain-bandwidth product. A replacement should still be approved only after checking every pin, electrical limit, temperature grade, qualification requirement, and supply range against the LM2902AWYPT datasheet. No unqualified cross-brand part should be installed solely because it also uses a 14-pin package.
What can replace LM2902AWYPT?
LM2902WYPT can be considered as a replacement candidate because it has the same manufacturer, 14-TSSOP package class, four-channel configuration, and listed 1.3 MHz gain-bandwidth product. The remaining conditions must be verified in the full datasheets, including offset voltage, bias current, common-mode limits, output swing, quiescent current, temperature range, and qualification. A true drop-in decision requires identical pin functions and acceptable electrical performance across the complete operating range.
Is LM2902AWYPT the same as LM2902WYPT?
No, the ordering codes identify different LM2902A variants even though the product pages describe the same core function and package. The LM2902AWYPT is the A-ordering variant, while LM2902WYPT is another 14-TSSOP ordering code, and the available summaries show a shared 1.3 MHz gain-bandwidth product. Treat them as related drop-in candidates only after confirming the temperature grade, qualification, and complete electrical specifications in the manufacturer documentation.
Where to buy LM2902AWYPT online?
Use the Request a Quote form on this page to request LM2902AWYPT availability, order quantities, and current commercial terms. The part is identified by STMicroelectronics as the 14-TSSOP low-power quad operational amplifier LM2902AWYPT. The request form is the appropriate route for current stock confirmation, lead time, minimum order quantity, and formal sourcing without relying on an outdated catalog price.
What is the price and lead time of LM2902AWYPT?
Current price and lead time for LM2902AWYPT are obtained through the Request a Quote form on this page. Quote requests can specify the required quantity, target date, and acceptable shipment destination, allowing the order to be reviewed against current component availability. The STMicroelectronics product listing identifies LM2902AWYPT as a 14-TSSOP quad operational amplifier, but commercial terms can change with quantity and sourcing conditions.

工程參考資料,適用於 LM2902AWYPT — 比較、設計指引及合規資訊。

選型指南

Choose LM2902AWYPT when a compact 14-TSSOP quad general-purpose op amp is needed for low-frequency sensor conditioning, active filtering, process-control error amplification, or low-frequency audio preamplification. Its four channels reduce package count, while the listed 1.3 MHz gain-bandwidth product, 100 dB common-mode rejection, and 375 µA quiescent current suit moderate-bandwidth, power-conscious analog circuits. Choose LM2902WYPT when that ordering variant is explicitly approved for the target temperature grade and supply conditions. Consider LM2902KPWR when its exact ordering details meet the project requirements and it provides a more suitable sourcing grade. Do not select a rail-to-rail, precision, high-slew-rate, or low-noise amplifier unless the design specifically requires those characteristics and this device's limits are inadequate.

與替代品比較

參數 本產品 LM2902WYPT LM2902KPWR
Package 14-TSSOP 14-TSSOP 14-TSSOP
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Amplifier Configuration Quad Quad Quad
Product Classification General-purpose amplifier General-purpose amplifier General-purpose amplifier
Number of Channels 4 circuits 4 circuits 4 circuits
Mounting Type Surface mount Surface mount Surface mount

主要差異化特點

  • Four general-purpose amplifier channels in a compact package (對比LM2902WYPT)
  • Documented low-power operating headline (對比LM2902KPWR)
  • 1.3 MHz bandwidth supports moderate-frequency closed-loop stages (對比LM2902WYPT)

設計說明

Place the supply bypass capacitor immediately between the device supply and ground pins, following the connection shown in the manufacturer datasheet. Keep the capacitor's ground return short and avoid routing sensitive amplifier inputs beside switching nodes or high-current return paths. Because all four channels share the same package and supply pins, poor package-level decoupling can affect every amplifier simultaneously rather than only one signal chain.

Do not assume that a shared 14-TSSOP footprint guarantees drop-in compatibility. Compare the complete numbered pin map, exposed-pad connection, supply range, input common-mode limits, output swing, offset voltage, bias current, temperature grade, and qualification requirements. LM2902WYPT is the closest documented candidate because its product listing matches the 14-TSSOP package, quad configuration, and 1.3 MHz gain-bandwidth headline rating, but it still requires a formal datasheet cross-check.

Keep each op-amp feedback loop physically compact and route non-inverting inputs away from output and supply pins. Use a solid ground reference for the amplifier package and return feedback and decoupling currents directly to the device ground without passing through noisy analog signal paths. For instrumentation layouts, maintain symmetrical sensor connections when possible so cable and board parasitics do not degrade the benefit provided by the listed 100 dB common-mode rejection.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available manufacturer and distributor product summaries do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements with STMicroelectronics before procurement.

相關搜尋

LM2902AWYPT LM2902AWYPT datasheet LM2902AWYPT datasheet pdf LM2902AWYPT pinout LM2902AWYPT equivalent LM2902AWYPT replacement LM2902AWYPT vs LM2902WYPT LM2902AWYPT price LM2902AWYPT stock STMicroelectronics LM2902AWYPT LM2902AWYPT 14-TSSOP LM2902AWYPT 1.3MHz op amp LM2902AWYPT sensor signal conditioning LM2902AWYPT application circuit

相關元件與詞彙

STMicroelectronics LM2902AWYPT LM2902WYPT LM2902KPWR LM324KAPWR MAX232EIPWR quad operational amplifier operational amplifier general-purpose amplifier low-power amplifier signal-conditioning IC analog IC linear semiconductor push-pull output stage gain-bandwidth product common-mode rejection quiescent current input bias current input offset current 14-TSSOP TSSOP family surface-mount package active filter sensor conditioning process control
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情