MCIMX357DVM5B - i.MX35 532MHz ARM1136 MPU 400-LFBGA | NXP
MPN： MCIMX357DVM5B ⚠ 最後購買機會MCIMX357DVM5B 概覽
A microprocessor (MPU) is an integrated circuit that integrates a central processing unit, memory controllers, and a rich set of on-chip peripherals into a single device, enabling compact, power-efficient system designs. The i.MX35 family sits within the NXP i.MX multimedia applications processor portfolio, targeting industrial HMI, automotive infotainment, and portable consumer products. Within the broader taxonomy, the MCIMX357DVM5B belongs to the hierarchy: ARM1136JF-S core -> ARM11 family -> ARM architecture -> microprocessor -> integrated circuit -> electronic component.
Key features include a 10/100 Ethernet MAC for wired connectivity, two FlexCAN modules for automotive/industrial networking, HS USB OTG + PHY and HS USB Host, an LCD controller for direct panel drive, an Image Processing Unit (IPU) for camera and display pipelines, and ROMless boot from external NOR/NAND flash. The integrated peripherals reduce BOM count and PCB complexity for cost-sensitive embedded designs.
The MCIMX357DVM5B is built on a 90 nm CMOS process and supports an industrial temperature range. Its combination of deterministic real-time response (via the ARM1136JF-S core with Jazelle Java acceleration) and multimedia acceleration (OpenVG 1.1 + IPU) makes it suitable for graphical human-machine interfaces and connected embedded nodes.
Typical applications include industrial human-machine interfaces (HMI), point-of-sale terminals, automotive infotainment head units, portable medical devices, and connected IoT gateways. The 10/100 Ethernet MAC plus two FlexCAN interfaces make it a natural fit for industrial and automotive network endpoints.
When designing with this device, pay close attention to PCB layout for the 0.8 mm pitch BGA and provide adequate power-rail decoupling. The ROMless boot mode requires an external boot ROM or NOR flash to initialize the system before any application code can execute.
This page synthesizes distributor pricing, drop-in i.MX35 alternatives, and practical design notes not aggregated on a single manufacturer or distributor page, supporting fast procurement decisions for long-life industrial designs.
直接替換替代品，適用於 MCIMX357DVM5B — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MCIMX357DVM5B （相同外形與佔位） — 差異在於 Core Architecture, Package, Manufacturer, Graphics Accelerator, Program Memory Type.
MCIMX353DVM5B
✅ 直接替換聯絡詢價
查看資料表 →MCIMX357DJQ5C
✅ 直接替換聯絡詢價
查看資料表 →MCIMX357CVM5B
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCIMX357DVM5B 最大額定值與電氣特性
| Core Architecture | ARM1136JF-S |
| Maximum CPU Clock | 532 MHz |
| Core Count | 1 |
| 資料匯流排寬度 | 32-bit |
| On-chip SRAM | 128 KB |
| L1 Cache (I/D) | 16 KB |
| L2 Cache | 128 KB |
| Program Memory Type | ROMless |
| Number of I/O | 96 |
| 封裝 / 外殼 | 400-LFBGA (17x17 mm, 0.8 mm pitch) |
| Graphics Accelerator | OpenVG 1.1 2.5D hardware accelerator |
| Image Processing Unit | Yes (IPU) |
| LCD Controller | Yes (integrated) |
| Ethernet MAC | 10/100 Ethernet MAC |
| CAN Interfaces | 2 x FlexCAN |
| USB | HS OTG + PHY, HS Host |
| Oscillator Type | External |
| 安裝類型 | Surface Mount |
| Packaging | Tray |
MCIMX357DVM5B 400-lfbga (17x17 mm, 0.8 mm pitch) 腳位配置指南
MCIMX357DVM5B（400-lfbga (17x17 mm, 0.8 mm pitch) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MCIMX357DVM5B.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCIMX357DVM5B 適用於 6 應用s: Industrial Human-Machine Interface (HMI), Automotive Infotainment Head Unit, Point-of-Sale (POS) Terminal, Portable Medical Device, Connected IoT Gateway, Industrial Printer / Label Maker.
Industrial Human-Machine Interface (HMI)
The MCIMX357DVM5B is well suited for industrial HMI panels where the 532 MHz ARM1136JF-S core drives OpenVG 1.1 2.5D graphics for smooth menu transitions and gauge rendering. The integrated LCD controller connects directly to TFT panels from 320x240 up to 1024x768 without an external bridge chip. Its 96 GPIOs and 10/100 Ethernet MAC simplify connection to industrial sensors, PLCs, and SCADA backbones, while the industrial temperature range and 400-LFBGA package support long-life factory-floor designs.
推薦
Automotive Infotainment Head Unit
The MCIMX357DVM5B's dual FlexCAN interfaces connect directly to automotive body and powertrain CAN buses, while the IPU handles camera input for driver-facing or surround-view applications. The 532 MHz ARM1136JF-S core delivers enough performance for infotainment graphics and audio decoding, and the 128 KB L2 cache keeps UI latency low under multitasking. Designers pairing this MPU with an external audio codec and power amplifier can build a complete head unit on a compact PCB.
推薦
Point-of-Sale (POS) Terminal
The MCIMX357DVM5B fits POS terminals because the ARM1136JF-S core runs a secure Linux or WinCE stack with plenty of headroom for payment applications, while HS USB OTG supports peripherals such as barcode scanners, receipt printers, and PIN pads. The 10/100 Ethernet MAC and two USB hosts deliver reliable connectivity for backend synchronization, and the OpenVG accelerator renders crisp product graphics and signature-capture UIs on the LCD panel.
推薦
Portable Medical Device
The MCIMX357DVM5B suits portable medical devices such as patient monitors and infusion pumps because the integrated IPU accelerates display rendering of vital-sign waveforms without taxing the CPU. The 128 KB on-chip SRAM provides deterministic response for interrupt-driven safety routines, and the 10/100 Ethernet MAC enables secure hospital-network connectivity. The industrial temperature range supports continuous operation in clinical environments.
推薦
Connected IoT Gateway
The MCIMX357DVM5B is a strong fit for industrial IoT gateways that aggregate sensor data over two CAN buses and forward it via Ethernet or HS USB to a cloud backend. The ARM1136JF-S core at 532 MHz runs a Linux stack with TLS, MQTT, and OPC-UA stacks concurrently. The 128 KB L2 cache handles protocol buffering, and the ROMless boot from NAND or SD simplifies field firmware updates through the same USB OTG port used for maintenance.
推薦
Industrial Printer / Label Maker
The MCIMX357DVM5B drives industrial label printers and small-format printers where the 532 MHz ARM1136JF-S core renders fonts and barcodes quickly while the LCD controller interfaces with the operator panel. HS USB Host and 10/100 Ethernet MAC provide flexible connectivity for print-job submission, and the two FlexCAN ports support integration into CAN-based production lines. The 96 GPIOs handle print-head stepper control, paper sensors, and cutter actuators without extra logic.
推薦
推薦產品摘要
工程參考資料，適用於 MCIMX357DVM5B — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCIMX353DVM5B | MCIMX357DJQ5C | MCIMX357CVM5B |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 400-LFBGA (17x17 mm, 0.8 mm pitch) | 400-LFBGA (17x17) - same | 400-LFBGA (17x17) - same | 400-LFBGA (17x17) - same |
| Core Architecture | ARM1136JF-S | ARM1136JF-S | ARM1136JF-S | ARM1136JF-S |
| Maximum CPU Clock | 532 MHz | 400 MHz (-25%) | 532 MHz (same) | 532 MHz (same) |
| On-chip SRAM | 128 KB | 128 KB | 128 KB | 128 KB |
| L1 Cache (I/D) | 16 KB | 16 KB | 16 KB | 16 KB |
| L2 Cache | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC |
| CAN Interfaces | 2 x FlexCAN | 2 x FlexCAN | 2 x FlexCAN | 2 x FlexCAN |
| Program Memory Type | ROMless | ROMless | ROMless | ROMless |
主要差異化特點
- Highest-clocked i.MX35 in the 400-LFBGA lineup (對比MCIMX353DVM5B)
- Integrated OpenVG 1.1 2.5D hardware accelerator (對比MCIMX353DVM5B)
- Same LFBGA footprint as the rest of the i.MX35 family (對比MCIMX357DJQ5C)
設計說明
The 400-LFBGA package uses a 0.8 mm ball pitch on a 17x17 mm body. Per NXP i.MX35 hardware design guidelines, use a microvia-in-pad PCB stack-up (8-layer minimum recommended) and matched-length DDR routing for the external memory bus. Place at least eight 0.1 uF decoupling capacitors within 5 mm of the BGA, with bulk 10 uF to 22 uF tantalum or polymer capacitors on each power rail. The center balls of the LFBGA provide thermal conduction; stitch thermal vias under the package to an inner ground plane to dissipate the 1 W to 2 W typical dissipation at 532 MHz.
The i.MX35 requires multiple supply rails (core, PLL, I/O, DDR, USB PHY) each with strict sequencing. Use the NXP-recommended PMIC such as the PF0100 or a discrete LDO + buck architecture. Estimated: at 532 MHz with 1.0 V core, the MPU draws approximately 600 mA to 800 mA; budget 1 A on the core LDO with adequate thermal relief. Failing to sequence rails correctly can latch-up or damage the part on power-up.
Do not assume the boot ROM stub will find your application image: configure the boot-mode pins (BMOD[1:0]) correctly for the chosen interface (NOR, NAND, SD, SPI). The MCIMX357DVM5B is ROMless, so an external boot device is mandatory. Also, the 96 GPIO count is the maximum theoretical number; actual usable GPIO depends on which peripherals you enable in the IOMUXC, so plan pin multiplexing early in the schematic phase to avoid last-minute rework.
合規資訊
RoHS and lead-free per NXP product page. The standard MCIMX357DVM5B is not AEC-Q100 qualified; check the Q-suffix member of the family for AEC-Q100 qualification.
