MPC8533EVTANGA - PowerQUICC III SoC, 800MHz e500v2 | NXP
MPN： MPC8533EVTANGA ✗ 停產MPC8533EVTANGA 概覽
A communications processor, also known as a PowerQUICC SoC, is a highly integrated microprocessor that combines a CPU core, memory controller, and networking peripherals on a single die. Architecturally, it sits between a microcontroller (which integrates CPU, memory, and peripherals on one chip) and an ASIC (which is hard-wired for one function). PowerQUICC III represents the third generation of this family, building on Motorola/Freescale's PowerQUICC I and II heritage and ultimately evolving into QorIQ platforms. It serves as the main control and data-plane processor in routers, switches, secure gateways, and multi-function printers.
Key features of the MPC8533EVTANGA include an e500v2 dual-issue superscalar 32-bit core with 7-stage pipeline, integrated 32 KB I-cache and 32 KB D-cache, DDR1/DDR2 SDRAM controller with ECC support, two 10/100/1000 Mbps Ethernet MACs (one RGMII, one SGMII), two PCI Express interfaces, one 32-bit PCI 2.3 interface, USB 2.0 (full-speed), four UARTs, SPI, I2C, local bus, and a hardware security engine supporting DES, 3DES, AES, RSA, and SHA-1/256 hash algorithms.
The device operates across 1.8V/2.5V/3.3V supply rails at 800 MHz and is manufactured in a 0.09um CMOS process. It targets commercial-temperature (0C to 90C) embedded environments. The 783-pin FCBGA package exposes the full processor local bus, DMA channels, and general-purpose I/O, allowing direct interconnection with flash, DDR memory, and PHY devices without external glue logic.
Typical applications include enterprise networking routers, secure VPN gateways, multi-function printers (MFP), industrial control, and imaging subsystems. The integrated SEC engine accelerates IPsec/SSL/TLS termination, removing the need for an external crypto chip in many VPN gateway designs. The dual GbE MACs support line-rate L2 bridging for branch-office routers and access points.
When designing with this part, pay close attention to power-rail sequencing (1.0V core must come up before 1.8V/2.5V/3.3V I/O) and DDR2 termination. Note that the MPC8533EVTANGA has been discontinued by NXP - designers should consult the product change notice for last-time-buy dates and consider QorIQ or Layerscape successors for new designs.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that complement the manufacturer datasheet.
直接替換替代品，適用於 MPC8533EVTANGA — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MPC8533EVTANGA （相同外形與佔位） — 差異在於 Core Architecture, Memory Controller, Package, Operating Temperature, L2 Cache.
MPC8533EVTANGB
✅ 直接替換📋 參考替代品（不在目錄中）
MPC8533EVTANG
✅ 直接替換聯絡詢價
查看資料表 →MPC8533EVTALGA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8533EVTANGA
✅ 直接替換聯絡詢價
查看資料表 →MPC8533EVTANGA 最大額定值與電氣特性
| Processor Family | PowerQUICC III (MPC85xx) |
| Core | PowerPC e500v2 (dual-issue superscalar, 7-stage pipeline) |
| Core Architecture | 32-bit Power Architecture |
| Maximum Core Frequency | 800 MHz |
| Manufacturing Process | 0.09 um CMOS |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| Supply Voltages | 1.8V / 2.5V / 3.3V (core 0.95V-1.05V per digchip) |
| Memory Controller | DDR1/DDR2 with ECC |
| Ethernet MACs | 2x 10/100/1000 Mbps (RGMII, SGMII) |
| PCI Express | 2x PCIe interfaces |
| PCI | 1x 32-bit PCI 2.3 |
| USB | USB 2.0 Full-Speed |
| Security Engine (SEC) | DES/3DES/AES/RSA/SHA-1/SHA-256 |
| 封裝 | 783-pin FCBGA (29 x 29 mm) |
| 安裝類型 | Surface Mount (BGA) |
| 工作溫度 | 0C to +90C (commercial) |
| Revision | 2.1 |
MPC8533EVTANGA 783-pin fcbga (29 x 29 mm) 腳位配置指南
MPC8533EVTANGA（783-pin fcbga (29 x 29 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MPC8533EVTANGA.
請參閱 資料表 以查看完整腳位配置。
典型應用
MPC8533EVTANGA 適用於 6 應用s: Enterprise Branch Office VPN Gateway, Multi-Function Printer (MFP) Imaging Controller, Industrial Secure Router for SCADA Networks, Wireless Access Point Controller (WLAN/Wi-Fi Gateway), Network Attached Storage (NAS) Head Unit, Embedded Imaging Sub-system for Medical Equipment.
Enterprise Branch Office VPN Gateway
The NXP MPC8533EVTANGA is purpose-built for branch-office VPN gateways. Its integrated SEC engine accelerates AES-256/SHA-256 IPsec at line rate on the dual GbE MACs (RGMII + SGMII), removing the need for an external crypto chip and reducing BOM cost. The 800 MHz e500v2 core runs the Linux/PowerQUICC networking stack with headroom for routing, firewalling, and intrusion detection. DDR2 with ECC supports deep packet inspection buffers. Two PCI Express links connect to additional NICs or hardware accelerators. Compared with a discrete CPU + FPGA + crypto-ASIC, this single-chip integration shrinks the gateway footprint and lowers per-unit cost, making it ideal for SOHO and SMB security appliances.
推薦
Multi-Function Printer (MFP) Imaging Controller
The MPC8533EVTANGA's combination of Gigabit Ethernet, PCI/PCIe expansion, USB 2.0, and a security engine makes it well suited to multi-function printer controllers that scan, print, fax, and authenticate users. The e500v2 core at 800 MHz runs the embedded imaging pipeline, while DDR2 with ECC buffers scanned pages before compression. The SEC accelerates secure LDAP/kerberos authentication and disk encryption. PCIe links connect to DSP scanner ASICs and to dedicated printer engines, and the local bus glues to scanner ADF control logic. The 783-FCBGA keeps the controller board compact enough to fit inside the printer chassis.
推薦
Industrial Secure Router for SCADA Networks
Industrial routers handling SCADA protocols benefit from the MPC8533EVTANGA's hardware-accelerated cryptography and PCI/PCIe expansion slots for cellular or serial gateway modules. The dual GbE MACs separate a trusted plant network from an untrusted enterprise uplink, while the SEC terminates IPsec tunnels to remote engineering stations. The local bus supports legacy parallel I/O for industrial protocol conversions, and DDR2 with ECC improves resilience against bit-flips in electrically noisy substation environments. Designers can extend to industrial temperature grades via the same MPC8533E family with extended screening, but the MPC8533EVTANGA itself is commercial grade (0C to +90C).
推薦
Wireless Access Point Controller (WLAN/Wi-Fi Gateway)
Enterprise wireless controllers aggregate multiple APs and terminate WPA2/WPA3-Enterprise tunnels. The MPC8533EVTANGA's SEC offloads AES-CCMP/GCMP encryption so the e500v2 core can run the 802.11 management plane, RADIUS messaging, and roaming logic without throughput loss. The SGMII MAC connects to a multi-port Gigabit PHY that links the controller to switch fabric, while PCIe interfaces attach to 802.11ac/ax radio cards. DDR2 with ECC holds roaming key cache tables securely. Compared with an ARM Cortex-A9 solution, the PowerQUICC III integrates the security block and a mature software ecosystem that already supports commercial WLAN controllers.
推薦
Network Attached Storage (NAS) Head Unit
Small-business NAS enclosures use the MPC8533EVTANGA as their main controller thanks to its GbE, PCIe expansion (for SATA RAID HBAs), and hardware cryptography that accelerates SMB3 encryption. The e500v2 core at 800 MHz handles file-serving, RAID management, and replication. DDR2 with ECC protects against silent data corruption in multi-drive arrays. The integrated SEC accelerates AES-XTS full-disk encryption so users can secure arrays at line rate. USB 2.0 supports UPS signaling and external backup targets. The 783-FCBGA package enables compact 1U NAS motherboard layouts.
推薦
Embedded Imaging Sub-system for Medical Equipment
Medical imaging appliances benefit from the MPC8533EVTANGA's hardware security, multiple high-speed I/Os, and deterministic real-time behavior. The hardware SEC engine provides HIPAA-compliant data-at-rest encryption without software overhead, and the SEC's SHA-256 acceleration secures audit logs. Dual Gigabit Ethernet separates DICOM imaging traffic from hospital IT networks; PCIe connects to FPGAs handling high-resolution ultrasound or video capture front-ends. The local bus interfaces to legacy medical sensors. Designers should validate IEC 60601 and IEC 62304 compliance separately and use an industrial temperature grade variant of the MPC8533 family for clinical deployment.
推薦
推薦產品摘要
工程參考資料，適用於 MPC8533EVTANGA — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MPC8533EVTANGB | MPC8533EVTANG | MPC8533EVTALGA |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same |
| Security Engine (SEC) | Yes (DES/3DES/AES/RSA/SHA) | Yes | Yes | Yes |
| DDR Controller | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC |
| Ethernet MACs | 2x GbE (RGMII + SGMII) | 2x GbE (RGMII + SGMII) | 2x GbE (RGMII + SGMII) | 2x GbE (RGMII + SGMII) |
| PCI Express | 2x PCIe | 2x PCIe | 2x PCIe | 2x PCIe |
| Lifecycle Status | End of Life (EOL) | End of Life (EOL) | End of Life (EOL) | End of Life (EOL) |
主要差異化特點
- Higher speed grade within the same family (對比MPC8533EVTANG)
- Includes integrated SEC security engine (對比MPC8533VTAQGA)
- Mature PowerQUICC software ecosystem (對比QorIQ / Layerscape)
設計說明
Power-rail sequencing is critical for the MPC8533EVTANGA. The 1.0V core voltage (VDD) must ramp up and stabilize before the 1.8V/2.5V/3.3V I/O rails (GVDD), otherwise the I/O drivers may latch up. Use a power management IC (such as NXP's MC34712 or compatible) that supports the specific OVR assert/de-assert timing in the datasheet. Decouple every power pin with a 0.1uF X7R ceramic placed as close as physically possible to the BGA via, and add bulk polymer 10-22uF capacitors on each voltage plane adjacent to the FCBGA land pattern.
The 783-FCBGA package has a theta_JC in the range of 0.2-0.4 C/W, but theta_JA depends strongly on the PCB stack-up and airflow. Place thermal vias in a dense array under the die, stitching to internal copper planes. For fanless routers and gateways, design the chassis for natural-convection airflow across the FCBGA and use thermal interface material between the package and the chassis wall. At 800 MHz core clock, expect 4-5W typical power dissipation - ensure the FCBGA junction temperature stays below the 90C commercial limit under worst-case ambient.
High-density HDI PCB stack-up is required for the 783-FCBGA: laser-drilled microvias (typically 0.1mm), via-in-pad recommended for BGA breakouts, and 4+N+4 or higher layer count. Match DDR2 data/address/control traces within 25 mil (0.635 mm) length tolerance to the memory devices. Route the SGMII and PCIe SERDES pairs as 85-ohm differential with continuous reference planes on adjacent layers, no splits under the pairs. Keep the e500v2 JTAG and BDM signals clear of switching power and SERDES regions to avoid noise coupling into debug logic.
When migrating from MPC8533 to MPC8536 or to QorIQ, software compatibility is NOT guaranteed: the QUICC Engine microcode tools differ, the DDR controller registers shift, and boot ROM vectors change. Plan a firmware re-validation cycle for any cross-family migration. Also avoid using both PCI and PCI Express ports simultaneously if the board only needs one - the unused port's reference clock must still be tied or disabled per the hardware manual, otherwise residual activity can inject noise. Finally, always source the latest revision errata from NXP before committing to volume production.
合規資訊
The MPC8533EVTANGA was originally released by Freescale (later acquired by NXP). RoHS/REACH declarations should be requested directly from NXP via the official product page; the manufacturer's datasheet snippet does not state compliance explicitly.
