MPC8533EVTANG - PowerPC e500v2 MPU 800MHz 783-FCBGA | NXP
MPN： MPC8533EVTANG ✗ 停產MPC8533EVTANG 概覽
A microprocessor (MPU) is the central processing unit of an embedded computing system, executing instructions fetched from memory and coordinating system peripherals. Within the embedded hierarchy, the MPC8533E sits between general-purpose application processors and microcontrollers, offering higher compute density than MCUs while retaining deterministic real-time behavior and rich industrial connectivity required by networking, storage, and telecom equipment. The MPC85xx family targets power-sensitive linecard and control-plane designs where integrated peripherals reduce BOM count.
Key features include a 32 KB instruction and 32 KB data L1 cache per core, 256 KB unified L2 cache, hardware virtualization support, and Trust Architecture 1.0 security. The integrated DDR2 memory controller supports up to 1 GB of addressable memory with ECC, while the four SerDes lanes can be routed to combinations of PCI Express, SGMII, or Serial RapidIO links depending on board design.
Typical applications include multi-service routers, Ethernet switches, linecards, network-attached storage (NAS), industrial automation controllers, and secure VPN/firewall appliances. The high peripheral integration and proven PowerQUICC architecture make it well suited for carrier-grade and industrial long-life-cycle designs.
When designing with this device, allocate adequate PCB area for the 783-ball FCBGA (1 mm pitch) - a 12-layer stack-up with continuous GND planes is recommended. Thermal management must dissipate up to 8-10 W under full load; a heatsink or thermal pad with adequate airflow is required. JTAG debug header access should be routed out for boundary-scan and code-debug support.
直接替換替代品，適用於 MPC8533EVTANG — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MPC8533EVTANG （相同外形與佔位） — 差異在於 Core Architecture, Memory Controller, Operating Temperature, Package, Mounting Type.
MPC8533EVTANGA
✅ 直接替換聯絡詢價
查看資料表 →MPC8533EVTANGB
✅ 直接替換📋 參考替代品（不在目錄中）
MPC8533EVJANGA
✅ 直接替換📋 參考替代品（不在目錄中）
MPC8533EVTANG 最大額定值與電氣特性
| Core Architecture | PowerPC e500v2, 32-bit |
| Number of Cores | 1 |
| Maximum Core Frequency | 800 MHz |
| L1 Cache (per core) | 32 KB instruction + 32 KB data |
| L2 Cache | 256 KB unified |
| 資料匯流排寬度 | 32-bit |
| 封裝 | 783-FCBGA (29x29 mm, 1 mm pitch) |
| 供應電壓 | 1.0 V (core) / 1.8 V / 2.5 V / 3.3 V (I/O) |
| 工作溫度 | 0 °C to +90 °C (TA = NG suffix) |
| Memory Controller | DDR2 with ECC |
| Ethernet Interfaces | 4x Gigabit (SGMII / RGMII) |
| PCI Express | Yes (via SerDes) |
| Serial RapidIO | Yes (via SerDes) |
| Local Bus | Enhanced Local Bus Controller |
| Security | Trust Architecture 1.0 |
| 安裝類型 | Surface Mount (BGA) |
| Lead-Free / RoHS | Lead-free BGA (per datasheet) |
MPC8533EVTANG 783-fcbga (29x29 mm, 1 mm pitch) 腳位配置指南
MPC8533EVTANG（783-fcbga (29x29 mm, 1 mm pitch) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MPC8533EVTANG.
請參閱 資料表 以查看完整腳位配置。
典型應用
MPC8533EVTANG 適用於 7 應用s: Multi-Service Router Control Plane, Ethernet Switch Linecard, Network-Attached Storage (NAS) Controller, Industrial Automation Controller, Secure VPN / Firewall Appliance, Telecom / Carrier-Grade Equipment, Embedded Computing Single-Board Computer (SBC).
Multi-Service Router Control Plane
The MPC8533EVTANG's 800 MHz PowerPC e500v2 core with 32 KB I-cache and 32 KB D-cache delivers deterministic throughput for routing-table lookup and forwarding-plane control. Its four integrated Gigabit Ethernet controllers (SGMII/RGMII) let a single chip terminate four WAN/LAN links without an external switch ASIC, reducing BOM cost for SMB router SKUs. The hardware floating-point unit accelerates IPSec / SSL handshake math, while Trust Architecture 1.0 secures boot and key storage. DDR2 with ECC protects the routing table against single-bit memory faults in carrier-grade deployments. Per the NXP datasheet, the integrated PCI Express and Serial RapidIO SerDes lanes also enable linecard interconnect to a co-located network processor.
推薦
Ethernet Switch Linecard
In managed Ethernet switch linecards, the MPC8533EVTANG serves as the management CPU, running the switching fabric control plane, SNMP/CLI agents, and L2/L3 management protocols. The four integrated Gigabit Ethernet ports let the device dual-purpose as both management CPU and low-port-count linecard termination for fixed-configuration switches. The enhanced local bus connects to a parallel PHY or switch ASIC for northbound uplinks. Hardware virtualization and Trust Architecture 1.0 enable secure multi-tenant network slicing. Per the NXP datasheet, the 783-FCBGA package's 1 mm pitch supports dense linecard layouts where board real estate is at a premium.
推薦
Network-Attached Storage (NAS) Controller
The MPC8533EVTANG fits as the main controller in mid-range NAS appliances, where the 800 MHz PowerPC e500v2 core handles file-system metadata, RAID management, and SMB/NFS protocol stacks. DDR2 with ECC protects user data against soft memory errors, and the PCI Express SerDes links to a SATA / SAS host-bus adapter for multi-drive bays. The four Gigabit Ethernet ports enable link-aggregation and multi-NIC configurations for high-throughput file serving. Per the NXP datasheet, the integrated DUART, I2C, and SPI simplify IPMI / BMC sideband management, common in rack-mount storage designs.
推薦
Industrial Automation Controller
In PLC and industrial automation controllers, the MPC8533EVTANG's deterministic PowerPC architecture and rich peripheral set (PCI Express, Gigabit Ethernet, DUART, I2C, SPI) replace multiple MCUs with a single integrated processor. The DDR2 controller with ECC supports long-runtime industrial applications. While the commercial 0-90 °C temperature grade (NG suffix) suits factory-floor enclosures, the MPC8533EVJANGA extended-temperature variant supports harsher environments. Per the NXP datasheet, the enhanced local bus connects to legacy industrial I/O modules, easing migration from older PowerQUICC II designs.
推薦
Secure VPN / Firewall Appliance
The MPC8533EVTANG accelerates VPN tunnel establishment and firewall rule processing with its 800 MHz e500v2 core and hardware floating-point unit. Trust Architecture 1.0 provides secure boot and cryptographic key storage required for FIPS 140-2 and Common Criteria certified appliances. The four Gigabit Ethernet ports segment WAN, LAN, DMZ, and management networks without an external switch. Per the NXP datasheet, hardware-accelerated encryption via the integrated SEC engine off-loads AES, 3DES, SHA, and RSA from the main CPU, sustaining line-rate IPsec throughput on GbE links.
推薦
Telecom / Carrier-Grade Equipment
The MPC8533EVTANG's PowerQUICC III heritage make it a long-lifecycle fit for telecom linecards, base-station controllers, and carrier-grade routers where 10+ year production support is required. The integrated PCI Express and Serial RapidIO SerDes interface with DSP arrays and network processors on adjacent linecards. ECC-protected DDR2 and Trust Architecture 1.0 meet carrier-grade reliability and security requirements. Per the NXP datasheet, the 783-FCBGA package's 1 mm pitch supports compact ATCA / AdvancedTCA linecard form factors with dense component placement behind a front-panel I/O connector.
推薦
Embedded Computing Single-Board Computer (SBC)
The MPC8533EVTANG powers embedded SBCs for transportation, military, and medical-imaging applications where its 800 MHz PowerPC e500v2 core offers a stable, long-life computing platform. The integrated DDR2 with ECC, four Gigabit Ethernet ports, and PCI Express eliminate the need for companion bridge chips, reducing SBC BOM and PCB area. Per the NXP datasheet, the enhanced local bus interfaces to FPGA co-processors for DSP and video pipeline acceleration. The 783-FCBGA package supports the dense component layout typical of 3U/6U VPX and VME single-board computer form factors.
推薦
推薦產品摘要
工程參考資料，適用於 MPC8533EVTANG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MPC8533EVTANGA | MPC8533EVTANGB | MPC8533EVJANGA |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same |
| Core | PowerPC e500v2, 32-bit, 1 core | PowerPC e500v2, 32-bit, 1 core | PowerPC e500v2, 32-bit, 1 core | PowerPC e500v2, 32-bit, 1 core |
| Core Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Operating Temperature | 0 °C to +90 °C (NG, commercial) | 0 °C to +90 °C | 0 °C to +90 °C | Extended temperature grade |
| DDR2 Controller | Yes (with ECC) | Yes (with ECC) | Yes (with ECC) | Yes (with ECC) |
| Gigabit Ethernet Ports | 4 (SGMII/RGMII) | 4 (SGMII/RGMII) | 4 (SGMII/RGMII) | 4 (SGMII/RGMII) |
主要差異化特點
- Single-die PowerQUICC III integration (對比MPC8533EVTANGB)
- Commercial temperature grade only (對比MPC8533EVJANGA)
- Hardware floating-point + SIMD (對比PowerQUICC II predecessors)
設計說明
The 783-FCBGA package at 1.0 mm ball pitch requires a minimum 8-layer (preferably 10-12 layer) PCB stack-up with 0.4 mm / 0.5 mm trace-and-space design rules for signal breakout. Use laser-drilled microvias or sequential lamination for inner-row fan-out; conventional through-vias will not fit between balls. Per the NXP MPC8533E hardware specifications datasheet, all four SerDes lanes need 100-ohm differential routing with intra-pair skew below 1 ps per centimeter; reference NXP application note AN3949 for the recommended stack-up, decoupling, and length-matching rules.
Estimated: at 800 MHz with full peripheral utilization (4x GbE + DDR2 + PCI Express + SEC engine), the MPC8533EVTANG dissipates approximately 5-8 W. The 783-FCBGA thermal resistance (theta_JA) is around 8-12 C/W with a 4-layer JEDEC test board and 1-2 m/s airflow. For an enclosed chassis, attach a heatsink or thermal interface material (TIM) pad with at least 2 m/s forced airflow; without airflow, derate ambient by 15-20 C to keep the junction below 105 C. The NG suffix part is rated 0 to +90 C commercial operating range.
Per the NXP MPC8533E datasheet, the device requires four independent supply rails: 1.0 V (Vcore), 1.8 V (DDR2), 2.5 V (SerDes analog), and 3.3 V (I/O). All four rails must come up in the sequence specified by the datasheet - typically Vcore last - and the power-on-reset (POR) signal must remain asserted until all rails are stable. Use a multi-rail PMIC or discrete LDO + supervisor design; the 1.0 V Vcore rail in particular must deliver up to 6 A peak transients with less than 30 mVpp ripple under dynamic load.
Estimated: a common pitfall is mismatched SerDes reference-clock routing - the MPC8533E's PCI Express and SGMII links share a common reference clock input, but each lane's AC-coupling capacitors must be placed on the SoC side (not the PHY side) per the datasheet reference schematic. Another pitfall is forgetting to enable the DDR2 calibration sequence in the boot RCW (reset configuration word); without it, DDR2 initialization fails intermittently at first power-up. Always load a known-good RCW image into the boot ROM before attempting DDR2 access.
合規資訊
Lead-free BGA per datasheet package description. RoHS and REACH compliance indicated by NXP product page; halogen-free status not confirmed in verified data and marked unknown.
