STM32F207ZGT7 - 120MHz Cortex-M3 1MB MCU | STMicroelectronics
MPN: STM32F207ZGT7 ✓ 啟用中STM32F207ZGT7 概覽
An Arm Cortex-M3 microcontroller is a reduced-instruction-set processor designed for embedded control. Its place in the hierarchy is microcontroller, embedded processor, microcontroller IC, and semiconductor. Unlike a general-purpose application processor, the STM32F207ZGT7 integrates memory, real-time peripherals, clocking, communications, and GPIO around a compact 32-bit core. This allows one device to execute control software and interface directly with sensors, actuators, industrial networks, storage media, and human-machine interfaces.
According to the STMicroelectronics product page and manufacturer datasheet, the STM32F20x family reaches 120 MHz and provides up to 1 MB of Flash, 128+4 KB of RAM, USB OTG HS/FS, Ethernet, 17 timers, 3 ADCs, and 15 communication interfaces. The high clock rate supports responsive protocol handling and real-time control, while the extensive peripheral set reduces the need for external interface devices. The LQFP-144 package also exposes substantially more I/O than smaller MCU packages.
The STM32F207 architecture provides a balanced combination of processing performance, memory, and connectivity. Its Cortex-M3 core can execute up to 150 DMIPs according to the manufacturer datasheet, while the 120 MHz operating frequency provides headroom for Ethernet, USB, control loops, and human-machine-interface tasks. The integrated communications peripherals make the MCU suitable for designs that previously required a separate communications controller or interface transceiver.
Typical applications include industrial Ethernet equipment, USB-to-network embedded controllers, camera and vision interfaces, programmable automation equipment, communications concentrators, and high-pin-count control platforms. A development platform such as the NUCLEO-F207ZG can be used to evaluate the STM32F207ZG device and develop Ethernet-enabled firmware before integrating the production MCU into a custom board.
Designers should treat the 144-pin LQFP footprint as a substantial mixed-signal layout challenge. Power, ground, decoupling, high-speed communications, analog inputs, and crystal or clock connections require careful partitioning. Use the pin-description table, recommended operating conditions, and application guidance in the manufacturer datasheet when assigning tracks and validating the power tree.
This page consolidates the exact manufacturer and distributor facts for STM32F207ZGT7, identifies defensible package-compatible alternatives, and adds practical guidance on memory, connectivity, PCB layout, firmware qualification, and component selection. It is designed to help engineers move from part identification to a qualified embedded design without relying on unrelated catalog listings.
直接替換替代品,適用於 STM32F207ZGT7 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32F207ZGT7 (相同外形與佔位) — 差異在於 Package, SRAM, ADC, Core, Flash Memory.
STM32F207ZGT6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32F207ZGT6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32F217ZGT6
✅ 直接替換聯絡詢價
查看資料表 →STM32F407ZGT6
✅ 直接替換✓ 有庫存
$5.25 / 單位
查看資料表 →STM32F405ZGT6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32F207ZGT7 最大額定值與電氣特性
| Product Type | 32-bit RISC microcontroller |
| Processor Core | Arm Cortex-M3 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Performance | 150 DMIPs |
| Embedded Flash Memory | 1 MB |
| Flash Organization | 1M x 8 bits |
| RAM | 128+4 KB |
| 供應電壓 | 2.5 V or 3.3 V |
| USB Interface | USB OTG HS/FS |
| Ethernet Support | Yes |
| Timer Count | 17 timers |
| ADC Count | 3 ADCs |
| Communication Interface Count | 15 communication interfaces |
| Camera Support | Yes |
| 封裝 | 144-pin LQFP, 20 mm x 20 mm |
| Temperature Grade | Industrial |
| Terminal Form | Gull wing |
| 安裝類型 | Surface mount |
STM32F207ZGT7 144-pin lqfp, 20 mm x 20 mm 腳位配置指南
STM32F207ZGT7(144-pin lqfp, 20 mm x 20 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F207ZGT7.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F207ZGT7 適用於 6 應用s: Industrial Ethernet Controllers, USB Communication Gateways, Camera Interface Equipment, Programmable Automation Equipment, Communications Concentrators, Embedded Data Acquisition Systems.
Industrial Ethernet Controllers
The STM32F207ZGT7 fits industrial Ethernet controllers because the STM32F20x family combines Ethernet connectivity with a 120 MHz Cortex-M3 core, 150 DMIPs, and 128+4 KB of RAM. The MCU can execute protocol processing, supervisory logic, and real-time control while supplying up to 15 communication interfaces for fieldbus, serial, or service connections. In a typical design, the MCU interfaces with an Ethernet PHY through dedicated MAC signals, while independent regulators and decoupling isolate the digital, analog, and communications loads. The 144-pin LQFP provides extensive I/O for status indicators, industrial inputs, and external control devices. Firmware and board qualification should confirm the exact PHY interface, clock requirements, electromagnetic performance, and recovery behavior under network faults.
推薦
USB Communication Gateways
The STM32F207ZGT7 is suitable for USB communication gateways because it provides USB OTG HS/FS alongside a 120 MHz Cortex-M3 core and up to 1 MB of Flash. That combination supports USB protocol stacks, local configuration, buffering, logging, and gateway control within one embedded design. The MCU can bridge USB-connected service equipment to Ethernet, serial networks, or industrial interfaces without relying on a separate host processor. Designers should use the datasheet-prescribed transceiver circuitry, controlled-impedance routing, ESD protection, and power supervision. Firmware must also handle USB enumeration, suspend and resume behavior, clock recovery, and fault recovery while the industrial side continues operating.
推薦
Camera Interface Equipment
The STM32F207ZGT7 supports camera-oriented embedded equipment through the camera capability identified for the STM32F20x family, together with its 120 MHz processing capacity and 3 ADCs. A controller can coordinate image-sensor timing, capture commands, exposure-control signals, and communication with a host processor while retaining direct access to digital and analog status inputs. The 144-pin LQFP offers enough pin count for parallel sensor signals, camera control lines, communications, and external memory or storage interfaces. Practical designs must match voltage levels, use appropriate signal conditioning, protect exposed connectors, and separate sensitive analog routing from fast digital clocks. Firmware should validate sensor timing, frame handling, error recovery, and bandwidth behavior across the complete operating temperature range.
推薦
Programmable Automation Equipment
The STM32F207ZGT7 is appropriate for programmable automation equipment because 17 timers, 3 ADCs, 15 communication interfaces, and 120 MHz execution provide a broad real-time control platform. Timers can support motor-control, sampling, and periodic sequencing tasks, while ADCs can monitor process variables and communications interfaces can connect the controller to sensors, operators, and plant equipment. The 128+4 KB RAM and up to 1 MB Flash permit meaningful control logic, diagnostics, and communication stacks without an external memory device. Designers should allocate deterministic timer resources, maintain separate analog and digital grounding, and place input filtering close to the controller. Qualification should include timing-margin analysis, watchdog behavior, peripheral fault recovery, and production programming procedures.
推薦
Communications Concentrators
The STM32F207ZGT7 can serve as the central controller in a communications concentrator because it combines Ethernet, USB OTG HS/FS, 15 communication interfaces, and a high-performance Cortex-M3 core. A single controller can manage multiple serial or fieldbus links, maintain system status, buffer traffic, and provide configuration and diagnostics through USB or Ethernet. The high pin count of the 144-pin LQFP accommodates several interface groups and control signals, while 1 MB of Flash supports a larger embedded application than smaller STM32 packages. A production design should use isolated communication transceivers where required, protect external connectors against surge and ESD events, and keep switching or high-current circuitry away from sensitive timing and analog nets. Firmware qualification should test link-failover behavior and sustained traffic at the intended operating temperature.
推薦
Embedded Data Acquisition Systems
The STM32F207ZGT7 fits embedded data-acquisition systems that require fast control alongside multiple analog inputs and communications. Its 3 ADCs provide dedicated conversion resources, while the 120 MHz Cortex-M3 core can run sampling control, filtering, calibration routines, and local data transfer. Ethernet and USB OTG HS/FS allow acquired information to move to a workstation or service network without requiring a separate protocol processor. The 144-pin LQFP package also provides flexible I/O for sensors, triggers, status lamps, and storage. Engineers should establish an analog ground and reference strategy, use appropriate anti-alias filtering, decouple supply rails locally, and separate input routes from clocks and digital outputs. Production validation should include gain, offset, noise, timing, and communication-integrity measurements across the intended voltage and temperature conditions.
推薦
推薦產品摘要
工程參考資料,適用於 STM32F207ZGT7 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F207ZGT6 | STM32F207ZGT | STM32F217ZGT6 | STM32F407ZG | STM32F405ZGT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-pin LQFP (20x20 mm) | 144-pin LQFP (20x20 mm) - same | 144-pin LQFP (20x20 mm) - same | 144-pin LQFP (20x20 mm) - same | 144-pin LQFP (20x20 mm) - same | 144-pin LQFP (20x20 mm) - same |
主要差異化特點
- Combines a 120 MHz Cortex-M3 core with extensive communications in one device (對比STM32F405ZGT6)
- Provides dedicated analog conversion resources (對比STM32F217ZGT6)
- Offers a high pin count for interface-intensive embedded products (對比STM32F207VCT7)
- Keeps the established STM32F207ZG device identity for firmware continuity (對比STM32F407ZG)
設計說明
Treat the STM32F207ZGT7 as a mixed-signal, high-pin-count design. Assign pins from the exact manufacturer pin-description table, preserve the 144-pin LQFP footprint, and place decoupling capacitors adjacent to the relevant supply pins. Keep analog inputs away from Ethernet, USB, and high-speed clock routes, provide a continuous ground reference beneath the device, and verify every alternate-function selection in firmware against the package pinout.
Establish separate low-noise analog and digital supply branches where the design requires independent measurement or communications performance. Follow the manufacturer recommendations for regulator selection, supply ramp behavior, bulk capacitance, and local ceramic decoupling. Check startup current, Ethernet PHY load, USB bus load, and analog-reference requirements under worst-case operating conditions rather than validating only the MCU core current.
Route clock, Ethernet, and USB signals as controlled-impedance interconnects with continuous reference planes and appropriately placed termination or biasing networks. Avoid stubs, unnecessary vias, and splits in ground or power planes. For analog channels, use short paths, controlled reference grounding, and anti-alias filtering before the ADC inputs. Validate the completed assembly with eye, timing, noise, and Ethernet compliance measurements where applicable.
合規資訊
The product listing identifies an industrial-grade STM32F207ZG device, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were included in the retrieved product records.