XC7Z007S-1CLG225C - 667MHz Cortex-A9 Zynq SoC | AMD
MPN: XC7Z007S-1CLG225C ✓ 啟用中XC7Z007S-1CLG225C 概覽
A Zynq SoC is an adaptive SoC that combines a hard-processor system with programmable logic. The processor system executes operating-system and application software, while the FPGA fabric accelerates parallel data processing, interfaces, and other time-critical functions. This integration reduces the number of devices and interconnects required when a conventional processor and FPGA appear in the same embedded system.
The XC7Z007S includes single-core ARM Cortex-A9 MPCore processing, CoreSight debugging, and 23K Artix-7 logic cells. Its 667 MHz processor rating supports embedded control workloads while the programmable-logic section provides parallel datapaths for image, control, communications, or instrumentation functions. The CLG225 device is housed in a 225-CSPBGA package measuring 13 mm by 13 mm.
AMD documentation identifies four external ADC signal pairs on the 7z007s single-core CLG225 device, while other supported Zynq-7000 devices expose 12 pairs. The commercial-grade XC7Z007S-1CLG225C is specified for a junction-temperature range of 0 °C to 85 °C. This makes the temperature grade an important selection criterion when the same CLG225 footprint is used across commercial, industrial, or extended-temperature equipment.
Typical applications include industrial control, factory automation, embedded vision, communications equipment, test and measurement, and compact edge-processing systems. Designers can place control software on the Cortex-A9 processor while assigning filtering, protocol conversion, data acquisition, or parallel interfaces to the programmable-logic fabric.
PCB implementation requires careful BGA fanout, multilayer-routing discipline, and power-delivery design. Use AMD UG865 for the CLG225 package pin information and board-level pinout, and UG585 for Zynq-7000 architecture and peripheral guidance. Differential and high-speed routes should follow the reference-design layer stack-up and controlled-impedance constraints rather than relying on generic BGA escape routing.
This product page combines the key device identity, commercial availability information, package details, temperature-grade distinctions, and same-footprint replacement guidance with practical implementation notes. It helps engineers separate processor speed, temperature grade, and package options before committing a multi-layer PCB design to a specific Zynq-7000S device.
直接替換替代品,適用於 XC7Z007S-1CLG225C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7Z007S-1CLG225C (相同外形與佔位) — 差異在於 Package, Temperature Grade.
XC7Z007S-1CLG225I
✅ 直接替換聯絡詢價
查看資料表 →XC7Z007S-2CLG225I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7Z007S-2CLG225C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7Z007S-2CLG225E
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7Z007S-1CLG225C4656
✅ 直接替換📋 參考替代品(不在目錄中)
XC7Z007S-1CLG225C 最大額定值與電氣特性
| Device Type | Zynq-7000S adaptive system-on-chip |
| Processor Core | Single ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| Debug Support | CoreSight |
| FPGA Family | Artix-7 |
| Logic Cells | 23K logic cells |
| Process Technology | 28 nm |
| 封裝 | 225-CSPBGA (13 mm × 13 mm) |
| Ball Count | 225 balls |
| 工作接面溫度 | 0 °C to 85 °C |
| Temperature Grade | Commercial |
| External ADC Signal Pairs | 4 differential input pairs |
| Development Tool Support | SnapEDA symbols, footprints, and 3D models supported |
XC7Z007S-1CLG225C 225-cspbga (13 mm × 13 mm) 腳位配置指南
XC7Z007S-1CLG225C(225-cspbga (13 mm × 13 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7Z007S-1CLG225C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7Z007S-1CLG225C 適用於 6 應用s: Industrial Control and Automation, Embedded Vision and Image Processing, Factory Data Acquisition, Communication and Protocol Conversion, Test and Measurement Equipment, Network Edge Processing.
Industrial Control and Automation
The AMD XC7Z007S-1CLG225C fits compact machine-control systems that need both deterministic programmable logic and a general-purpose processor. The 667 MHz Cortex-A9 core can run control software, communications stacks, and supervisory logic, while the 23K Artix-7 fabric can handle parallel sensor acquisition, pulse counting, timing, or custom interface logic. Its 225-CSPBGA package limits board area, and the four external ADC signal pairs support a small number of directly connected analog channels. Designers should place the device in a multilayer board with controlled-impedance routing and use AMD UG865 to validate every CLG225 power, ground, clock, and interface assignment.
推薦
Embedded Vision and Image Processing
The XC7Z007S-1CLG225C can divide an embedded vision pipeline between software and hardware. The Cortex-A9 processor is suitable for operating-system support, image formatting, and higher-level decisions, while the 23K Artix-7 logic fabric can accelerate parallel pixel movement, thresholding, filtering, or data reduction. Its 667 MHz processing rate supports compact edge-processing equipment without a separate FPGA. The principal constraint is logic capacity, so designers should map time-critical datapaths into the fabric and leave general-purpose control in software. A multilayer PCB, dedicated clock routing, and the AMD package guidelines are essential for reliable high-speed implementation.
推薦
Factory Data Acquisition
The AMD XC7Z007S-1CLG225C is useful in factory data-acquisition equipment that must combine sensor conditioning, digital filtering, and network-facing control. Its four external ADC signal pairs can serve limited differential analog channels, while the FPGA fabric can implement parallel sampling control and real-time filtering. The processor can manage configuration, data transfer, diagnostics, and an embedded software stack. Because the CLG225 package is compact but dense, use via-in-pad-compatible assembly rules, maintain a continuous ground-plane structure, and route sensitive analog inputs separately from high-speed digital interfaces.
推薦
Communication and Protocol Conversion
The Zynq-7000S architecture in XC7Z007S-1CLG225C supports communications equipment that benefits from fixed-format hardware logic alongside a Linux-capable processor. Protocol endpoints, framing, FIFOs, and time-critical serial processing can be implemented in the 23K-logic-cell Artix-7 fabric, while the Cortex-A9 core handles configuration, management, and upper-layer protocols. The integrated processor and FPGA can reduce board-level interconnects compared with a separate implementation. Clock-domain crossings, DDR memory integrity, and high-speed layer transitions must be reviewed carefully, using the Zynq-7000 reference designs and package specifications during schematic and layout signoff.
推薦
Test and Measurement Equipment
The AMD XC7Z007S-1CLG225C suits compact instrumentation that combines sequential processing with flexible high-speed acquisition logic. The Cortex-A9 processor can control tests, interpret results, and provide a network or storage interface, while the Artix-7 fabric can execute deterministic timing, pattern generation, signal conditioning, and data capture. Its 225-CSPBGA form factor supports compact front-end electronics, although it demands disciplined BGA escape routing and multilayer return-path continuity. The commercial 0 °C to 85 °C junction range must be respected in ventilated and unventilated instrument enclosures, or an industrial-grade CLG225 option should be selected.
推薦
Network Edge Processing
The XC7Z007S-1CLG225C can serve as a compact network-edge controller for protocol aggregation, status monitoring, and hardware-assisted data processing. The ARM Cortex-A9 processor handles operating-system tasks and network applications, while the programmable-logic fabric provides deterministic packet handling, buffering, or custom serial interfaces. The 23K logic-cell capacity keeps the design economical for workloads that do not require a large FPGA. Power budgeting and thermal design should account for both processor and FPGA activity, and the four ADC pairs should not be allocated without confirming the pin and analog-resource requirements in UG865.
推薦
推薦產品摘要
工程參考資料,適用於 XC7Z007S-1CLG225C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7Z007S-1CLG225I | XC7Z007S-2CLG225I | XC7Z007S-2CLG225C | XC7Z007S-2CLG225E | XC7Z007S-1CLG225C4656 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 225-CSPBGA (CLG225) | 225-CSPBGA (CLG225) | 225-CSPBGA (CLG225) | 225-CSPBGA (CLG225) | 225-CSPBGA (CLG225) | 225-CSPBGA (CLG225) |
| Processor Core | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore |
| Logic Cells | 23K | 23K | 23K | 23K | 23K | 23K |
| Speed Grade | 1 | 1 | 2 | 2 | 2 | 1 |
| Temperature Classification | Commercial | Industrial | Industrial | Commercial | Extended | Commercial |
| External ADC Signal Pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| Programmable Logic Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Device Suffix | 1CLG225C | 1CLG225I | 2CLG225I | 2CLG225C | 2CLG225E | 1CLG225C4656 |
主要差異化特點
- Commercial-grade option with integrated processor and FPGA (對比XC7A100T-1FGG484C)
- Higher-performance same-package upgrade path (對比XC7Z007S-1CLG225I)
- Industrial-temperature option without changing the footprint (對比XC7Z007S-1CLG225C)
- Compact processor-plus-logic integration (對比XC7Z007S-1CLG225C4656)
設計說明
Treat the CLG225 package as a multilayer, high-density BGA design rather than a conventional two-layer assembly. Use the AMD UG865 pinout and package files to establish escape routing, power and ground ball assignments, and the exposed thermal and electrical requirements. Keep continuous ground planes under the device, minimize loop areas in power distribution, and follow the supported via-in-pad and solder-mask requirements of the selected assembly process.
Route processor memory, programmable-logic interfaces, and other high-speed signals with the stack-up and impedance values used by the AMD reference designs. Maintain uninterrupted reference planes, avoid changing layer transitions under active routes, and place decoupling and clock circuitry according to the power-management architecture. Signal-loss and skew budgets should be reviewed after placement because a mechanically valid escape pattern does not guarantee electrical performance.
Create separate power branches for the processor system and programmable logic as required by the Zynq-7000 power architecture. Validate steady-state and transient current at the selected speed grade, then include regulator headroom, capacitor sizing, and power-sequence timing in the system review. Changing from the 1 speed grade to a 2 speed grade can alter dynamic power, so thermal and power-budget calculations must be repeated rather than copied unchanged.
Do not treat CLG225 and CLG400 alternatives as footprint-compatible. The package dimensions, ball count, and pin locations differ, even though both belong to the XC7Z007S family. A valid replacement must use the 225-CSPBGA CLG225 footprint and then satisfy the required speed grade, temperature grade, lifecycle status, and software-device support. Use the exact full MPN when creating the BOM and library symbols.
合規資訊
No explicit compliance declarations are listed for the exact XC7Z007S-1CLG225C ordering code. Review current AMD environmental and material compliance documentation for the selected part and assembly configuration.