XC7A100T-2FTG256C - 101,440-LC Artix-7 FPGA | AMD
MPN: XC7A100T-2FTG256C ✓ 啟用中XC7A100T-2FTG256C 概覽
An FPGA is a programmable-logic semiconductor whose configurable lookup tables, routing fabric, block RAM, and DSP resources implement digital functions after configuration. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices, alongside CPLDs, and differs from fixed-function logic because one board design can support multiple hardware behaviors through a revised configuration image.
Key resources include 101,440 logic cells for parallel digital logic, 170 high-performance I/O for external interfaces, and 240 DSP48E1 slices for filtering, transforms, and arithmetic-intensive pipelines. The FTG256 package provides 256 physical balls in a 17 mm by 17 mm land pattern. The -2 ordering code denotes the middle performance grade within the XC7A100T family, while the C suffix identifies the commercial temperature option.
The Artix-7 architecture combines programmable logic, dedicated DSP48E1 processing elements, block RAM, and high-speed I/O in one device. A 1 V core supply supports a power-efficient implementation when the design does not require the capabilities of larger AMD FPGA families. DSP48E1 resources can accelerate operations that would otherwise require many look-up tables and flip-flops, reducing logic congestion while improving predictability in filter and waveform-processing designs.
Typical applications include industrial automation controllers, camera and image-processing pipelines, communication interface modules, robotics control, general-purpose DSP accelerators, and compact embedded systems. The 170 available I/O support parallel sensors, transceivers, displays, memory interfaces, and board-level control signals, while the 240 DSP slices provide dedicated parallel arithmetic resources for sensor fusion and signal conditioning.
PCB design must treat the FTG256 as a fine-pitch BGA device and follow AMD package, power, decoupling, and high-speed layout guidance. Validate power sequencing, I/O standards, decoupling placement, and the complete pin assignment against the manufacturer package files before fabrication. Existing XC7A100T designs can also require a new bitstream and configuration validation when migrating between speed, temperature, or package options.
This product page combines Artix-7 resource data, package information, same-family drop-in options, comparison parameters, and practical PCB guidance to support component selection, replacement planning, and hardware bring-up.
直接替換替代品,適用於 XC7A100T-2FTG256C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7A100T-2FTG256C (相同外形與佔位) — 差異在於 Package, Temperature Grade, Logic Cells, Mounting Type, RoHS Status.
XC7A100T-1FTG256C
✅ 直接替換聯絡詢價
查看資料表 →XC7A100T-2FTG256I
✅ 直接替換聯絡詢價
查看資料表 →XC7A100T-1FTG256I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A100T-1FTG256E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A100T-2FTG256E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A100T-2FTG256C 最大額定值與電氣特性
| Device Type | Artix-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 101,440 logic cells |
| User I/O | 170 I/O |
| DSP Slices | 240 DSP48E1 slices |
| 封裝 | 256-pin FTG256 package |
| Package Type | FTBGA-256 / 256-LBGA |
| Package Dimensions | 17 mm x 17 mm |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Performance Grade | -2 speed grade |
| Temperature Grade | Commercial, 0°C to +85°C |
| Programmable Logic | Configurable LUT-based FPGA logic |
| Dedicated DSP | 240 DSP48E1 slices |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | RoHS3 compliant |
| REACH Status | Unknown |
XC7A100T-2FTG256C 17 mm x 17 mm 腳位配置指南
XC7A100T-2FTG256C(17 mm x 17 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7A100T-2FTG256C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7A100T-2FTG256C 適用於 6 應用s: Industrial Automation Controller, Camera Image-Processing Pipeline, Communication Interface Module, Robotics Control System, General-Purpose DSP Accelerator, Compact Embedded Control Platform.
Industrial Automation Controller
The XC7A100T-2FTG256C fits industrial automation controllers that combine sequential machine control with parallel sensor acquisition. Its 101,440 logic cells can implement field-bus interfaces, state machines, interlocks, counters, and motion-control coordination, while 170 I/O provide connections to encoders, limit switches, actuators, and operator panels. The 240 DSP48E1 slices add dedicated arithmetic capacity for filtering position or force feedback before control algorithms evaluate it. Using the -2 grade preserves a common performance target across multiple controller variants, and the commercial 0°C to +85°C specification suits controlled indoor enclosures. Validate timing at the industrial system's temperature range and ensure the PCB power architecture can support the 1 V core supply without excessive transient droop.
推薦
Camera Image-Processing Pipeline
The XC7A100T-2FTG256C is suitable for camera and machine-vision preprocessing because its 101,440 logic cells can implement pixel transport, line timing, exposure control, and interface conversion. The 240 DSP48E1 slices provide parallel resources for filtering, correlation, and color or intensity calculations, reducing reliance on external processors for early-stage image conditioning. Its 170 I/O can connect image sensors, parallel capture devices, memory, and control logic, making the FTG256 package practical for compact vision modules. For line-rate designs, pipeline the sensor data across DSP slices and registers rather than concentrating entire operations in one stage. Validate achievable throughput, memory bandwidth, and signal timing with the selected camera interface and the device's 1 V core-supply requirements.
推薦
Communication Interface Module
The XC7A100T-2FTG256C works well in communication equipment where framing, protocol conversion, buffering, and line-rate control must coexist on one board. The 101,440 logic cells can support multiple packet engines, test generators, status logic, and backplane interfaces, while the 240 DSP48E1 slices can assist with modulation, filtering, or signal-quality calculations. Its 170 I/O are useful for parallel network management, PHY control, clock distribution, and diagnostic signals. The -2 performance grade provides a defined timing target for medium-rate designs where the XC7A100T-1FTG256C speed is unnecessary. During implementation, constrain all high-speed interfaces, include CDC analysis for asynchronous domains, and verify board-level channel loss and skew against the selected transceiver specification.
推薦
Robotics Control System
The XC7A100T-2FTG256C can coordinate robotics subsystems requiring deterministic parallel control and sensor fusion. Its logic fabric can host motor-control sequencing, encoder capture, communications, safety interlocks, and supervisory state machines, while dedicated DSP48E1 slices accelerate trajectory, force, or vibration calculations. The 170 I/O support encoders, current sensors, motor drivers, emergency-stop monitoring, and external processors without requiring several smaller programmable devices. The compact 17 mm by 17 mm FTG256 package helps reduce board area in mobile robot electronics. Keep safety-critical shutdown paths independent of software wherever required, isolate noisy motor returns from sensitive logic, and verify all timing constraints with the selected motor-control and sensor sampling rates.
推薦
General-Purpose DSP Accelerator
The XC7A100T-2FTG256C is appropriate for fixed-function signal accelerators built around the 240 DSP48E1 slices. Parallel slices can implement filters, correlation, modulation, error correction, and multiply-accumulate pipelines, while the remaining 101,440 logic cells handle address generation, buffering, control, and data movement. This mixed architecture allows a compact accelerator card to replace a pipeline of separate DSPs and programmable logic devices. For each arithmetic kernel, select the appropriate DSP48E1 operating mode and pipeline registers to meet clock timing without excessive resource duplication. Include buffering for bursty input sources, account for block RAM bandwidth, and test numerical results against a golden model before deployment.
推薦
Compact Embedded Control Platform
The XC7A100T-2FTG256C supports compact embedded platforms that combine configuration logic, peripheral control, data acquisition, and communication in one device. Its 101,440 logic cells can run multiple real-time control tasks and custom peripherals, while the FTG256 package's 170 I/O provide ample board-level connectivity. The device's dedicated DSP resources can accelerate selected algorithms without offloading every task to an external processor, reducing software latency and board complexity. The 1 V core supply should be connected to a properly sequenced, adequately decoupled power network, while configuration and I/O supplies must meet their own voltage requirements. Confirm configuration-memory interface support, boot behavior, and watchdog recovery paths in the complete embedded architecture before production release.
推薦
推薦產品摘要
工程參考資料,適用於 XC7A100T-2FTG256C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7A100T-1FTG256C | XC7A100T-2FTG256I | XC7A100T-1FTG256I | XC7A100T-1FTG256E | XC7A100T-2FTG256E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FTG256, 256 pins, 17 mm x 17 mm | FTG256, 256 pins | FTG256, 256 pins | FTG256, 256 pins | FTG256, 256 pins | FTG256, 256 pins |
| Performance Grade | -2 | -1, one grade faster | -2, same grade | -1, one grade faster | -1, one grade faster | -2, same grade |
| Temperature Grade | Commercial, 0°C to +85°C | Commercial, 0°C to +85°C | Industrial, -40°C to +100°C | Industrial, -40°C to +100°C | Extended, 0°C to +100°C | Extended, 0°C to +100°C |
| Logic Cells | 101,440 | 101,440 | 101,440 | 101,440 | 101,440 | 101,440 |
| User I/O | 170 | 170 | 170 | 170 | 170 | 170 |
| DSP48E1 Slices | 240 | 240 | 240 | 240 | 240 | 240 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
主要差異化特點
- Balanced mid-speed Artix-7 configuration (對比XC7A100T-1FTG256C)
- Commercial temperature option for controlled installations (對比XC7A100T-2FTG256I)
- High logic and DSP density in one 256-ball package (對比XC7A100T-1FTG256I)
設計說明
Treat the FTG256 as a 256-ball fine-pitch BGA and assign every ball from the AMD Artix-7 package device pinout files. Preserve the official ball map for power, configuration, clock, user I/O, and reserved functions; do not infer connections from the 170-I/O headline count. Use the recommended fanout or escape-routing pattern, maintain symmetric length matching on constrained interfaces, and include thermal-via and ground-plane structures directly beneath the device. A completed stack-up and escape-routing review should precede fabrication because small routing errors can prevent reliable assembly.
Design the FPGA power network for the 1 V core rail and the separate configuration and I/O requirements listed in the manufacturer documentation. Place the required bulk and high-frequency decoupling capacitors close to their associated supply and ground balls, with short, low-inductance connections and an uninterrupted return path. Validate startup current, rail sequencing, voltage tolerance, and the worst-case core activity permitted by the design. If the XC7A100T-1FTG256C is considered, repeat power and thermal checks because the faster performance grade can change dynamic power behavior.
Constrain every high-speed interface with the board-specific timing model and enforce the I/O standards selected for each external device. Separate clocks from high-speed data traces where practical, use continuous reference planes, and control skew across byte lanes or parallel buses. Add clock-domain-crossing analysis for asynchronous control signals and isolate noisy external interfaces from precision timing paths. Because the target uses a 1 V core and a dense BGA package, power-plane geometry and return-path continuity should be reviewed together rather than optimized as separate routing problems.
合規資訊
The component is identified as RoHS3 compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is established for this ordering code.