XC7A200T-2FF1156I - 500 I/O Artix-7 FPGA | AMD
MPN: XC7A200T-2FF1156I ✓ 啟用中XC7A200T-2FF1156I 概覽
An FPGA is a user-programmable semiconductor containing configurable logic blocks, programmable I/O, memory, dedicated DSP slices, and clock-management resources. Within the semiconductor hierarchy, an FPGA sits above a programmable logic device and supports hardware-level parallelism rather than executing instructions sequentially. The XC7A200T belongs to the Artix-7 family, which combines mid-range programmable logic density with low-power operation for industrial control, communications, instrumentation, embedded vision, and test equipment.
The Artix-7 device provides 215,360 logic cells organized into 16,825 CLBs, together with 13 Mb of block RAM and 740 DSP48 resources. Its 500 user I/O support high pin-count interfaces, while integrated transceivers and advanced clocking resources enable high-speed serial connectivity. The -2 speed designation and industrial-temperature suffix identify this configuration for designs requiring the specified performance grade across industrial operating conditions.
The 1156-BBGA, FCBGA package is intended for multilayer PCB construction and high-density interconnect. Because the package exposes more than 1,100 contacts, power delivery, via-in-pad construction, ball-map verification, and thermal design are central to successful implementation. AMD package-device pinout files should be used when assigning every power, ground, configuration, clock, and user-I/O connection.
Typical Artix-7 applications include industrial Ethernet and programmable control, high-speed data acquisition, digital signal processing, test and measurement, communications infrastructure, embedded vision, and sensor-fusion systems. These systems benefit from parallel pipelines, dedicated DSP resources, and deterministic hardware timing without the power envelope of a larger programmable-logic family.
When migrating an existing board, verify the exact package drawing, ball map, power rails, configuration interface, and design-tools support before treating another Artix-7 ordering code as interchangeable. A device with a similar cell count is not automatically a drop-in replacement when its package designation, speed grade, temperature rating, or pin map differs.
This page consolidates device specifications, ordering-code differences, package considerations, application guidance, and design notes for engineers evaluating the XC7A200T-2FF1156I as the central programmable-logic device in an industrial or communications design.
直接替換替代品,適用於 XC7A200T-2FF1156I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7A200T-2FF1156I (相同外形與佔位) — 差異在於 Block RAM, Logic Cells, Package.
XC7A200T-2FFG1156I
✅ 直接替換聯絡詢價
查看資料表 →XC7A200T-1FFG1156I
✅ 直接替換📋 參考替代品(不在目錄中)
XC7A200T-2FFG1156C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A200T-1FF1156I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A200T-2FF1156E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A200T-2FF1156I 最大額定值與電氣特性
| Device Family | Artix-7 |
| Device Type | Field Programmable Gate Array (FPGA) |
| Logic Cells | 215,360 cells |
| Configurable Logic Blocks | 16,825 CLBs |
| Block RAM | 13 Mb |
| DSP Slices | 740 |
| User I/O | 500 |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| 封裝 | 1156-BBGA FCBGA, 35 x 35 mm |
| Total Package Contacts | 1156 balls |
| Speed Grade | -2 |
| Temperature Grade | Industrial |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
| Programmable Logic | FPGA programmable logic device |
| Dedicated DSP Resource | DSP48 processing slices |
XC7A200T-2FF1156I 1156 balls 腳位配置指南
XC7A200T-2FF1156I(1156 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7A200T-2FF1156I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7A200T-2FF1156I 適用於 6 應用s: Industrial Programmable Control, High-Speed Data Acquisition, Digital Signal Processing, Communications and Network Interfaces, Test and Measurement Instrumentation, Embedded Vision and Sensor Fusion.
Industrial Programmable Control
The XC7A200T-2FF1156I fits centralized machine control, sequencing, and safety-adjacent logic because it provides 215,360 logic cells, 16,825 CLBs, and 500 I/O in a single Artix-7 device. Parallel control paths can combine sensor conditioning, motion sequencing, diagnostics, and communications without relying on sequential processor execution. The 740 DSP slices also support filters or motion-analysis functions. Validate timing against the selected -2 speed grade and use the AMD package-device pinout files for every 1156-ball assignment.
推薦
High-Speed Data Acquisition
The Artix-7 XC7A200T-2FF1156I can implement multiple parallel acquisition pipelines because its 500 user I/O and 215,360 logic cells provide substantial interface and buffering capacity. Block RAM of 13 Mb can hold sample windows or packet data, while 740 DSP slices accelerate filtering and transformation without excessive processor loading. A practical design should define clock domains, I/O standards, and trace lengths before assigning balls. Use the package files and device data sheet to verify every high-speed signal and supply connection.
推薦
Digital Signal Processing
The XC7A200T-2FF1156I is well matched to fixed-point filtering, FFT-like pipeline processing, modulation, and spectral analysis because 740 dedicated DSP slices work alongside 13 Mb of block RAM and 215,360 logic cells. Parallel architecture permits multiple channels or butterflies to be processed simultaneously, while on-chip RAM reduces external-memory traffic. Pipeline latency and clock rate must be evaluated with the device timing model. Confirm the exact DSP and RAM resources against the Vivado design report before finalizing architecture.
推薦
Communications and Network Interfaces
The 500-I/O XC7A200T-2FF1156I can consolidate protocol termination, packet processing, buffering, and interface bridging in an Artix-7 device. Its 13 Mb of block RAM supports modest packet queues and protocol state, while 215,360 logic cells allow multiple datapaths to operate concurrently. High-speed links require careful clocking, controlled-impedance routing, and compliance with the selected transceiver or I/O standard. The device’s general-purpose I/O count should not be confused with the number of dedicated high-speed transceivers.
推薦
Test and Measurement Instrumentation
The XC7A200T-2FF1156I supports high-throughput pattern generation, protocol testing, and real-time analysis by combining 500 I/O with 215,360 programmable logic cells and 740 DSP slices. Parallel test channels can be generated and evaluated concurrently, reducing the need for repeated external processor cycles. Block RAM can capture short diagnostic sequences, and the dense FCBGA package supports high-speed interconnect on a multilayer board. Clock jitter, I/O standards, and pin-bank constraints must be reviewed together during architecture selection.
推薦
Embedded Vision and Sensor Fusion
The XC7A200T-2FF1156I can combine image pre-processing, sensor fusion, and control logic in one programmable-logic device. Its 215,360 logic cells support parallel feature extraction, 740 DSP slices accelerate arithmetic operations, and 13 Mb of block RAM provides line buffers or intermediate storage. The 500-I/O count simplifies camera, sensor, and memory-interface connections, although each interface still consumes appropriate package balls. Clock-domain crossing, RAM bandwidth, and DDR timing are the principal constraints in high-resolution pipelines.
推薦
推薦產品摘要
工程參考資料,適用於 XC7A200T-2FF1156I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7A200T-2FFG1156I | XC7A200T-1FFG1156I | XC7A200T-2FFG1156C | XC7A200T-1FF1156I | XC7A200T-2FF1156E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1156-BBGA FCBGA, 35 x 35 mm | 1156-BBGA FCBGA, 35 x 35 mm | 1156-BBGA FCBGA, 35 x 35 mm | 1156-BBGA FCBGA, 35 x 35 mm | 1156-BBGA FCBGA, 35 x 35 mm | 1156-BBGA FCBGA, 35 x 35 mm |
| Device Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Speed Grade | -2 | -2 | -1 | -2 | -1 | -2 |
主要差異化特點
- High-density Artix-7 programmable logic with dedicated DSP capacity (對比XC7A200T-1FFG1156I)
- Substantial on-chip memory for parallel processing (對比XC7A200T-2FFG1156I)
- High-pin-count integration reduces external logic (對比XC7A200T-1FF1156I)
設計說明
The 1156-ball package requires a multilayer power plane with short, low-impedance connections between the FPGA and every rail. Decouple each supply domain locally with the capacitance specified by the AMD device documentation, and route high-current connections to multiple package balls where the pinout permits. Separate configuration, clock, and sensitive I/O return paths from noisy digital returns to reduce power-induced timing jitter and configuration errors.
Thermal design should begin with the estimated utilization, transceiver activity, and selected I/O standards rather than a nominal device figure. Distribute heat through the PCB and provide additional copper or a heat-spreading structure when the enclosure restricts convection. Analyze worst-case ambient temperature, local power density, and board thermal resistance in the system model. Validate the final assembly because solder voids and uneven mounting can change the thermal path significantly.
Use the official Artix-7 package-device pinout files to create the footprint and then perform an independent comparison against the manufacturer package drawing. The 35 x 35 mm, 1156-ball FCBGA has a dense escape-routing region, so plan layer transitions, microvias, and pad fanout before placing the memory, clock, and transceiver circuitry. Do not rely on a generic BGA symbol or an incomplete pin map.
High-speed I/O and memory interfaces require continuous reference planes, appropriate via stitching, and length-aware routing. Derive length and impedance limits from the selected interface standard and the target device speed grade, then validate with the design-tools IBIS model and post-route timing analysis. Keep clock distribution away from noisy power converters and switch-node areas, and provide dedicated return paths beneath each high-speed interface.
合規資訊
RoHS compliance is identified for the exact XC7A200T-2FF1156I listing. Other environmental and material-compliance declarations are not stated in the available product information.