AMD

XC7A200T-2FF1156I - 500 I/O Artix-7 FPGA | AMD

MPN: XC7A200T-2FF1156I ✓ Active
1 V Vdss 1156-BBGA FCBGA, 35 x 35 mm Package -2 Speed
MOQ: 1 |

XC7A200T-2FF1156I Overview

The AMD XC7A200T-2FF1156I is an Artix-7 field-programmable gate array built on 28 nm technology, with 215,360 logic cells, 500 I/O, 16,825 configurable logic blocks, 740 DSP slices, and 13 Mb of block RAM in a 1156-ball FCBGA package. It operates from a 1 V core supply and targets designs requiring substantial parallel processing, high-speed serial links, programmable logic, and dedicated DSP resources.

An FPGA is a user-programmable semiconductor containing configurable logic blocks, programmable I/O, memory, dedicated DSP slices, and clock-management resources. Within the semiconductor hierarchy, an FPGA sits above a programmable logic device and supports hardware-level parallelism rather than executing instructions sequentially. The XC7A200T belongs to the Artix-7 family, which combines mid-range programmable logic density with low-power operation for industrial control, communications, instrumentation, embedded vision, and test equipment.

The Artix-7 device provides 215,360 logic cells organized into 16,825 CLBs, together with 13 Mb of block RAM and 740 DSP48 resources. Its 500 user I/O support high pin-count interfaces, while integrated transceivers and advanced clocking resources enable high-speed serial connectivity. The -2 speed designation and industrial-temperature suffix identify this configuration for designs requiring the specified performance grade across industrial operating conditions.

The 1156-BBGA, FCBGA package is intended for multilayer PCB construction and high-density interconnect. Because the package exposes more than 1,100 contacts, power delivery, via-in-pad construction, ball-map verification, and thermal design are central to successful implementation. AMD package-device pinout files should be used when assigning every power, ground, configuration, clock, and user-I/O connection.

Typical Artix-7 applications include industrial Ethernet and programmable control, high-speed data acquisition, digital signal processing, test and measurement, communications infrastructure, embedded vision, and sensor-fusion systems. These systems benefit from parallel pipelines, dedicated DSP resources, and deterministic hardware timing without the power envelope of a larger programmable-logic family.

When migrating an existing board, verify the exact package drawing, ball map, power rails, configuration interface, and design-tools support before treating another Artix-7 ordering code as interchangeable. A device with a similar cell count is not automatically a drop-in replacement when its package designation, speed grade, temperature rating, or pin map differs.

This page consolidates device specifications, ordering-code differences, package considerations, application guidance, and design notes for engineers evaluating the XC7A200T-2FF1156I as the central programmable-logic device in an industrial or communications design.

Drop-in alternatives for XC7A200T-2FF1156I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with XC7A200T-2FF1156I (same form factor and footprint) — differing in Block RAM, Logic Cells, Package.

AMD
Block RAM: 13455360 bits
Logic Cells: 215360
Package: 1156-BBGA, FCBGA
Compare with XC7A200T-2FF1156I →

XC7A200T-2FFG1156I

✅ Drop-In
AMD
📦 1156-BBGA FCBGA, 35 x 35 mm
Artix-7 · 215360 · 13455360 bits · 740 · 500 · 10 (CMT) · 628 MHz · 0.95 V to 1.05 V

Contact for price

View Datasheet →

XC7A200T-1FFG1156I

✅ Drop-In
📦 1156-BBGA FCBGA, 35 x 35 mm
Same Artix-7 logic-cell count and listed 1156-ball class, but -1 speed grade provides lower timing performance than the -2 target.

📋 Reference alternative (not in catalog)

XC7A200T-2FFG1156C

✅ Drop-In ⚠️ Specs Unverified
📦 1156-BBGA FCBGA, 35 x 35 mm
Same 215,360-cell Artix-7 architecture and -2 speed grade; commercial temperature suffix differs from the industrial target.

📋 Reference alternative (not in catalog)

XC7A200T-1FF1156I

✅ Drop-In ⚠️ Specs Unverified
AMD
📦 1156-BBGA FCBGA, 35 x 35 mm
Artix-7 Field Programmable Gate Array (FPGA) · 215,360 logic elements · 16,825 LABs · 13,455,360 bits · 500 pins · 1,098 MHz · 1156-ball FCBGA, 35 mm x 35 mm · Surface-mount FCBGA

Contact for price

View Datasheet →

XC7A200T-2FF1156E

✅ Drop-In ⚠️ Specs Unverified
📦 1156-BBGA FCBGA, 35 x 35 mm
Same 215,360-cell device, 500 I/O, and -2 speed grade; the E temperature suffix differs from the industrial target.

📋 Reference alternative (not in catalog)

XC7A200T-2FF1156I Maximum Ratings & Electrical Characteristics

Device Family Artix-7
Device Type Field Programmable Gate Array (FPGA)
Logic Cells 215,360 cells
Configurable Logic Blocks 16,825 CLBs
Block RAM 13 Mb
DSP Slices 740
User I/O 500
Process Technology 28 nm
Core Supply Voltage 1 V
Package 1156-BBGA FCBGA, 35 x 35 mm
Total Package Contacts 1156 balls
Speed Grade -2
Temperature Grade Industrial
Mounting Type Surface Mount
RoHS Status Compliant
Programmable Logic FPGA programmable logic device
Dedicated DSP Resource DSP48 processing slices

XC7A200T-2FF1156I 1156 balls Pin Configuration Guide

Pin configuration for XC7A200T-2FF1156I (1156 balls package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

1156 balls package pinout diagram for XC7A200T-2FF1156I

No detailed pinout data available for XC7A200T-2FF1156I.

Refer to the datasheet for full pin configuration.

Typical Applications

XC7A200T-2FF1156I is suitable for 6 applications: Industrial Programmable Control, High-Speed Data Acquisition, Digital Signal Processing, Communications and Network Interfaces, Test and Measurement Instrumentation, Embedded Vision and Sensor Fusion.

🏭

Industrial Programmable Control

The XC7A200T-2FF1156I fits centralized machine control, sequencing, and safety-adjacent logic because it provides 215,360 logic cells, 16,825 CLBs, and 500 I/O in a single Artix-7 device. Parallel control paths can combine sensor conditioning, motion sequencing, diagnostics, and communications without relying on sequential processor execution. The 740 DSP slices also support filters or motion-analysis functions. Validate timing against the selected -2 speed grade and use the AMD package-device pinout files for every 1156-ball assignment.

📊

High-Speed Data Acquisition

The Artix-7 XC7A200T-2FF1156I can implement multiple parallel acquisition pipelines because its 500 user I/O and 215,360 logic cells provide substantial interface and buffering capacity. Block RAM of 13 Mb can hold sample windows or packet data, while 740 DSP slices accelerate filtering and transformation without excessive processor loading. A practical design should define clock domains, I/O standards, and trace lengths before assigning balls. Use the package files and device data sheet to verify every high-speed signal and supply connection.

🌐

Digital Signal Processing

The XC7A200T-2FF1156I is well matched to fixed-point filtering, FFT-like pipeline processing, modulation, and spectral analysis because 740 dedicated DSP slices work alongside 13 Mb of block RAM and 215,360 logic cells. Parallel architecture permits multiple channels or butterflies to be processed simultaneously, while on-chip RAM reduces external-memory traffic. Pipeline latency and clock rate must be evaluated with the device timing model. Confirm the exact DSP and RAM resources against the Vivado design report before finalizing architecture.

🔌

Communications and Network Interfaces

The 500-I/O XC7A200T-2FF1156I can consolidate protocol termination, packet processing, buffering, and interface bridging in an Artix-7 device. Its 13 Mb of block RAM supports modest packet queues and protocol state, while 215,360 logic cells allow multiple datapaths to operate concurrently. High-speed links require careful clocking, controlled-impedance routing, and compliance with the selected transceiver or I/O standard. The device’s general-purpose I/O count should not be confused with the number of dedicated high-speed transceivers.

🧪

Test and Measurement Instrumentation

The XC7A200T-2FF1156I supports high-throughput pattern generation, protocol testing, and real-time analysis by combining 500 I/O with 215,360 programmable logic cells and 740 DSP slices. Parallel test channels can be generated and evaluated concurrently, reducing the need for repeated external processor cycles. Block RAM can capture short diagnostic sequences, and the dense FCBGA package supports high-speed interconnect on a multilayer board. Clock jitter, I/O standards, and pin-bank constraints must be reviewed together during architecture selection.

🎥

Embedded Vision and Sensor Fusion

The XC7A200T-2FF1156I can combine image pre-processing, sensor fusion, and control logic in one programmable-logic device. Its 215,360 logic cells support parallel feature extraction, 740 DSP slices accelerate arithmetic operations, and 13 Mb of block RAM provides line buffers or intermediate storage. The 500-I/O count simplifies camera, sensor, and memory-interface connections, although each interface still consumes appropriate package balls. Clock-domain crossing, RAM bandwidth, and DDR timing are the principal constraints in high-resolution pipelines.

Recommended Products Summary

XC7A200T-2FFG1156I AMD Used in: Industrial Programmable Control, Test and Measurement Instrumentation M2GL090T-FGG676 Microchip Technology Used in: Industrial Programmable Control XC7A200T-1FFG1156I Same Artix-7 density and 1156-ball family for timing-sensitive acquisition alternatives Used in: High-Speed Data Acquisition CS5330 Companion ADC-class interface for parallel conversion systems Used in: High-Speed Data Acquisition XC7A200T-2FFG1156C Same Artix-7 DSP and programmable-logic density with a different temperature suffix Used in: Digital Signal Processing, Embedded Vision and Sensor Fusion XC9572XL-7VQ64I AMD Used in: Digital Signal Processing XC7A200T-1FF1156I AMD Used in: Communications and Network Interfaces LAN9306 Ethernet controller companion for embedded connectivity Used in: Communications and Network Interfaces CS42448 Audio interface companion for multi-channel measurement systems Used in: Test and Measurement Instrumentation ADV7343WBSTZ Analog Devices Used in: Embedded Vision and Sensor Fusion
What is the AMD XC7A200T-2FF1156I?
The AMD XC7A200T-2FF1156I is an Artix-7 FPGA with 215,360 logic cells, 500 I/O, 16,825 CLBs, 740 DSP slices, and 13 Mb of block RAM in a 1156-BBGA FCBGA package. The device is manufactured on 28 nm technology and uses a 1 V core supply. Its combination of parallel programmable logic, dedicated DSP resources, and a high-pin-count package suits industrial control, communications, data acquisition, instrumentation, and test systems.
What are the key specifications of XC7A200T that engineers should know?
The XC7A200T provides 215,360 logic cells organized as 16,825 CLBs, plus 740 DSP slices, 13 Mb of block RAM, and 500 user I/O. AMD describes the family as 28 nm Artix-7 technology with a 1 V core supply. The XC7A200T-2FF1156I uses a 35 x 35 mm 1156-BBGA FCBGA package, making ball assignment, multilayer power distribution, thermal management, and high-speed routing central to board design.
Where can I download the XC7A200T-2FF1156I datasheet PDF?
The XC7A200T-2FF1156I datasheet PDF is available through the AMD-hosted copy linked on this page and through the official Artix-7 package-pinout-files page. The product listing identifies the device as an Artix-7 FPGA with 215,360 logic cells and 500 I/O in a 1156-BBGA FCBGA. For implementation, use the Artix-7 data sheet for electrical limits and the AMD package-device pinout files for exact ball assignments.
Where can I find the XC7A200T-2FF1156I pinout?
The exact XC7A200T-2FF1156I ball map is available from AMD through the Artix-7 Package Device Pinout Files resource, which provides package files in TXT and CSV formats. Use that resource together with UG475 when assigning power, ground, configuration pins, clock-capable pins, and user I/O. The device has 1,156 package balls, so do not substitute a smaller-package pin diagram.
What is the difference between XC7A200T-2FF1156I and XC7A200T-2FFG1156I?
Both ordering codes are listed for the 215,360-cell Artix-7 device with 500 I/O and a 1156-BBGA FCBGA package, but their ordering suffixes are not interchangeable without a package-document check. The exact differences depend on AMD’s ordering-information table, including package and temperature-code treatment. Before substitution, compare the complete ordering code, device marking, ball map, temperature grade, and configuration requirements in the Artix-7 documentation.
Can XC7A200T-1FFG1156I replace XC7A200T-2FF1156I?
The XC7A200T-1FFG1156I uses a lower speed grade than the XC7A200T-2FF1156I, so it is not guaranteed to meet the same timing performance even though both are listed in the 215,360-cell Artix-7 family. The FFG1156I package ordering code also requires verification against the target package drawing and ball map. Use it only after AMD timing analysis and a complete PCB compatibility review confirm adequate margin.
What is the best drop-in replacement for XC7A200T-2FF1156I?
The closest same-family candidates are the XC7A200T-2FFG1156I, XC7A200T-1FFG1156I, XC7A200T-2FFG1156C, XC7A200T-1FF1156I, and XC7A200T-2FF1156E, but none should be treated as automatically drop-in without verification. The Artix-7 1156-ball variants share the 215,360-cell device and 500-I/O architecture, while speed grade, temperature suffix, package documentation, and timing margins can differ. Use AMD ordering information and package pinout files for the final decision.
Is XC7A200T the same as a competitor FPGA with the same package?
No cross-manufacturer equivalent is established by the documented family and package information for this ordering code. Matching a package size or logic-cell count does not guarantee compatible ball maps, power rails, configuration methods, memory interfaces, or timing. A competitor device requires a complete hardware migration: pinout comparison, power-tree validation, clock and reset mapping, configuration adaptation, timing closure, and new bitstream generation.
When should I choose XC7A200T-2FF1156I over a smaller Artix-7 FPGA?
Choose the XC7A200T-2FF1156I when the design needs more parallel processing than a smaller Artix-7 device provides, especially when the design combines 215,360 logic cells, 740 DSP slices, 13 Mb of block RAM, and 500 I/O. It is also appropriate when the PCB can support a 1156-ball FCBGA with controlled impedance, dense power delivery, and thermal management. Smaller devices are preferable when capacity is not the limiting constraint.
Is XC7A200T-2FF1156I suitable for industrial applications?
The XC7A200T-2FF1156I is identified as an industrial-temperature Artix-7 FPGA with 215,360 logic cells and 500 I/O. Its -2 speed grade, 740 DSP slices, and 13 Mb of block RAM support deterministic industrial control, communications, data acquisition, and signal-processing functions. Confirm the complete operating-temperature limits, power budget, and environmental qualification requirements in the AMD Artix-7 data sheet for the deployed enclosure.
What is the XC7A200T-2FF1156I used for in data acquisition and signal processing?
The XC7A200T-2FF1156I is suited to parallel acquisition and signal-processing pipelines because it combines 215,360 logic cells, 740 DSP slices, 13 Mb of block RAM, and 500 I/O in one 1156-BBGA package. Multiple parallel channels can be filtered or transformed concurrently, with on-chip block RAM buffering samples and programmable logic controlling acquisition sequencing. Interface rates and timing closure still depend on the selected clocking and transceiver resources.
How much power does the XC7A200T-2FF1156I use?
Power consumption depends on the selected I/O standards, clocking, transceiver activity, resource utilization, and ambient conditions, so a fixed device-level figure would be misleading. AMD’s Artix-7 power-estimation tools and device data sheet should be used with the final utilization report and board thermal model. A dense 1156-ball design also requires low-impedance power distribution and careful separation of high-current and sensitive analog rails.
Can I use a development board based on XC7A200T for prototyping?
A development board can be used to validate programmable logic, interfaces, memory architectures, and application algorithms before the custom PCB is released. However, board-level resources such as DDR memory, transceivers, clocking, and high-speed I/O may differ from the final XC7A200T-2FF1156I design. Confirm that the board uses the same Artix-7 device speed grade, package, pinout, power configuration, and supported clocking resources before relying on timing results.
Where can I buy the XC7A200T-2FF1156I and request a quote?
Use the Request a Quote form on this page to request current availability, unit pricing, and lead time for the exact XC7A200T-2FF1156I ordering code. Include the required quantity, shipping destination, and target date in the request. Confirm that the quoted marking and complete suffix match the 1156-BBGA device specified by your design before releasing the purchase order.
How long is the lead time for XC7A200T-2FF1156I?
The current lead time for the XC7A200T-2FF1156I should be confirmed through the Request a Quote form on this page, because factory scheduling, package allocation, and order volume can change availability. Provide the annual usage estimate and whether multiple date codes are acceptable. Also state whether the design can use the related Artix-7 ordering codes only after confirming timing, temperature, package, and ball-map compatibility.
Is the XC7A200T-2FF1156I currently in stock?
Current stock status for the exact XC7A200T-2FF1156I ordering code is best obtained through the Request a Quote form on this page. A distributor listing showing the part does not by itself guarantee inventory for a specific quantity, package marking, or delivery schedule. State the required quantity and target delivery date so the current factory and distribution position can be evaluated against your production schedule.

Engineering reference data for XC7A200T-2FF1156I — comparison, design guidance, and compliance information.

Selection Guide

Choose the XC7A200T-2FF1156I when an industrial design requires the full 215,360-cell Artix-7 device, 740 DSP slices, 13 Mb of block RAM, and 500 I/O on a 35 x 35 mm FCBGA footprint. The related XC7A200T-2FFG1156I is the closest listed option for common platform configurations, but its ordering suffix and package documentation must be checked before substitution. Use a -1 speed-grade device only when timing analysis shows adequate margin and lower performance is acceptable. Commercial or extended-temperature suffixes require environmental review. For a different manufacturer, assume there is no drop-in path: ball assignment, power rails, configuration, memory interfaces, clocks, and timing all need a complete redesign and migration.

Comparison with Alternatives

Parameter This Product XC7A200T-2FFG1156I XC7A200T-1FFG1156I XC7A200T-2FFG1156C XC7A200T-1FF1156I XC7A200T-2FF1156E
Brand AMD AMD AMD AMD AMD AMD
Package 1156-BBGA FCBGA, 35 x 35 mm 1156-BBGA FCBGA, 35 x 35 mm 1156-BBGA FCBGA, 35 x 35 mm 1156-BBGA FCBGA, 35 x 35 mm 1156-BBGA FCBGA, 35 x 35 mm 1156-BBGA FCBGA, 35 x 35 mm
Device Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Logic Cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells
Speed Grade -2 -2 -1 -2 -1 -2

Key Differentiators

  • High-density Artix-7 programmable logic with dedicated DSP capacity (vs XC7A200T-1FFG1156I)
  • Substantial on-chip memory for parallel processing (vs XC7A200T-2FFG1156I)
  • High-pin-count integration reduces external logic (vs XC7A200T-1FF1156I)

Design Notes

The 1156-ball package requires a multilayer power plane with short, low-impedance connections between the FPGA and every rail. Decouple each supply domain locally with the capacitance specified by the AMD device documentation, and route high-current connections to multiple package balls where the pinout permits. Separate configuration, clock, and sensitive I/O return paths from noisy digital returns to reduce power-induced timing jitter and configuration errors.

Thermal design should begin with the estimated utilization, transceiver activity, and selected I/O standards rather than a nominal device figure. Distribute heat through the PCB and provide additional copper or a heat-spreading structure when the enclosure restricts convection. Analyze worst-case ambient temperature, local power density, and board thermal resistance in the system model. Validate the final assembly because solder voids and uneven mounting can change the thermal path significantly.

Use the official Artix-7 package-device pinout files to create the footprint and then perform an independent comparison against the manufacturer package drawing. The 35 x 35 mm, 1156-ball FCBGA has a dense escape-routing region, so plan layer transitions, microvias, and pad fanout before placing the memory, clock, and transceiver circuitry. Do not rely on a generic BGA symbol or an incomplete pin map.

High-speed I/O and memory interfaces require continuous reference planes, appropriate via stitching, and length-aware routing. Derive length and impedance limits from the selected interface standard and the target device speed grade, then validate with the design-tools IBIS model and post-route timing analysis. Keep clock distribution away from noisy power converters and switch-node areas, and provide dedicated return paths beneath each high-speed interface.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS compliance is identified for the exact XC7A200T-2FF1156I listing. Other environmental and material-compliance declarations are not stated in the available product information.

Related Searches

xc7a200t board xc7a200t datasheet xc7a200t development board xc7a200t price xc7a200t fpga xc7a200t 2fbg484i xc7a200t 2fbg676i xc7a200t 2ffg1156i xc7a200t 1ffg1156i xc7a200t 2sbg484i XC7A200T-2FF1156I datasheet PDF XC7A200T-2FF1156I pinout XC7A200T-2FF1156I equivalent XC7A200T-2FF1156I replacement AMD XC7A200T-2FF1156I price

Related Components & Terms

AMD XC7A200T-2FF1156I XC7A200T-2FFG1156I XC7A200T-1FFG1156I XC7A200T-2FFG1156C Artix-7 FPGA field-programmable gate array programmable logic device semiconductor 215,360 logic cells 16,825 configurable logic blocks 740 DSP slices 13 Mb block RAM 500 user I/O 1156-BBGA FCBGA BGA package family surface mount 28 nm process technology industrial control data acquisition digital signal processing embedded vision RoHS UG475
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details