EPM9320RC208-15 - MAX 9000 CPLD 320 Macro Cells 15ns | Altera
料号： EPM9320RC208-15 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
EPM9320RC208-15 概述
A CPLD (Complex Programmable Logic Device) is a programmable logic IC that combines multiple PAL-like logic blocks with a programmable interconnect matrix on a single die. CPLDs sit between simple PLDs and FPGAs in the programmable logic hierarchy: they offer deterministic, non-volatile timing (EEPROM-based configuration) and instant-on operation, unlike SRAM-based FPGAs that require external configuration memory. The MAX 9000 family is built on Altera's third-generation Multiple Array MatriX (MAX) architecture, which uses EEPROM cells for configuration storage, giving the device non-volatile operation without a configuration PROM.
The EPM9320RC208-15 provides 320 macro cells organized into logic array blocks (LABs), with 6,000 usable gates for implementing glue logic, state machines, bus interfaces, and address decoding. Its 15 ns pin-to-pin delay (speed grade -15) supports system clock rates up to approximately 117.6 MHz for the -15 grade, making it suitable for legacy 5 V TTL/CMOS logic consolidation. The 208-pin RQFP package provides up to 160 user I/O pins, enabling wide bus interfacing in a single device.
Typical applications include legacy industrial control boards, telecommunications line cards, bus bridging (PCI, VME, ISA), and replacement of discrete 74-series glue logic. Because the device is EEPROM-based, it retains its configuration after power-down and requires no external configuration device, simplifying board design compared to SRAM FPGAs.
When designing with the EPM9320RC208-15, note that it is a 5.0 V core device and is not 3.3 V tolerant on all pins without level shifting. The device was declared obsolete by Altera (now Intel) in 2007 per PDN0706, so new designs should consider the MAX II or MAX V families; however, the EPM9320RC208-15 remains in demand for sustaining existing 5 V designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： EPM9320RC208-15 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EPM9320RC208-15 （相同外形与封装尺寸） ——差异在于 Package, In-System Programmability, Propagation Delay (tPD), Operating Temperature, Usable Gates.
快速对比工具——选择替代料号进行并排对比：
EPM9320ARC208-15
✅ 直接替换📋 参考替代料（不在目录中）
EPM9320RC208-10
✅ 直接替换✓ 有现货
$26.4 / 个
查看数据手册 →EPM9320RC208-20
✅ 直接替换✓ 有现货
$21.9 / 个
查看数据手册 →EPM9320RC208-15N
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →EPM9320ARC208-10
✅ 直接替换✓ 有现货
$21.4 / 个
查看数据手册 →EPM9320RC208-15 最大额定值与电气特性
| Device Family | MAX 9000 |
| Macro Cells | 320 |
| Usable Gates | 6,000 |
| Pin-to-Pin Propagation Delay | 15 ns (speed grade -15) |
| 最大时钟频率 | 117.6 MHz |
| 电源电压 | 5.0 V |
| Configuration Technology | EEPROM-based (non-volatile) |
| In-System Programmability | Yes (ISP via JTAG) |
| JTAG Interface | IEEE Std. 1149.1 |
| 封装 | 208-pin RQFP (Power QFP) |
| Package Type | 208-BFQFP Exposed Pad |
| 安装类型 | Surface Mount |
| 生命周期状态 | Obsolete (PDN0706, 2007) |
EPM9320RC208-15 208-bfqfp exposed pad 引脚配置指南
EPM9320RC208-15（208-bfqfp exposed pad 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： EPM9320RC208-15.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EPM9320RC208-15 适用于 6 应用s: Legacy Industrial Control Boards, Telecommunications Line Cards, Bus Bridging (PCI, VME, ISA), Glue Logic Consolidation, Sustaining Existing 5V Designs, Test and Measurement Instrumentation.
Legacy Industrial Control Boards
The EPM9320RC208-15 fits legacy industrial control boards because its 320 macro cells and 6,000 usable gates consolidate discrete 74-series glue logic into a single 5.0 V EEPROM-based CPLD. Its 15 ns pin-to-pin delay supports deterministic state-machine and address-decoding logic at clock rates up to 117.6 MHz, while non-volatile EEPROM configuration means the device is instant-on with no external configuration PROM. Placed between the host processor bus and peripheral I/O, it implements chip-select decoding and handshake logic. The trade-off is that the 5.0 V core is not 3.3 V tolerant on all pins, so level shifting is required when interfacing modern 3.3 V peripherals.
推荐
Telecommunications Line Cards
The EPM9320RC208-15 suits telecommunications line cards where wide bus interfacing and deterministic timing are required. Its 208-pin RQFP package provides a high I/O count for interfacing TDM buses and control-plane signals, and the 15 ns propagation delay supports the timing budgets of legacy telecom backplanes. The EEPROM-based MAX 9000 architecture provides instant-on operation, which is important for line cards that must be ready immediately after power-up without a configuration boot cycle. The device implements bus arbitration, clock multiplexing, and status-register logic. Because it is a 5.0 V part, designers must confirm compatibility with mixed-voltage backplanes and add level shifters where 3.3 V signaling is used.
推荐
Bus Bridging (PCI, VME, ISA)
The EPM9320RC208-15 is well suited to bus-bridging applications such as PCI, VME, and ISA interfaces because its 320 macro cells can implement protocol translation and wait-state generation in a single device. The 15 ns pin-to-pin delay provides adequate margin for 33 MHz PCI and legacy VME timing, and the 208-pin RQFP package supplies enough I/O to route a full address/data bus plus control signals. EEPROM configuration allows the bridge logic to be reprogrammed in-system via JTAG during board bring-up, accelerating debug. The main design consideration is that the 5.0 V supply and I/O levels must be reconciled with 3.3 V PCI signaling, typically requiring bus transceivers or level shifters on the 3.3 V side.
推荐
Glue Logic Consolidation
The EPM9320RC208-15 is used to consolidate dozens of discrete 74-series logic devices into one programmable part, reducing board area, power, and BOM count. With 6,000 usable gates and 320 macro cells, it absorbs address decoders, multiplexers, counters, and state machines that would otherwise require multiple packages. The 15 ns speed grade supports clock rates up to 117.6 MHz, sufficient for most glue-logic functions, and the EEPROM configuration eliminates the external configuration memory needed by SRAM FPGAs. The trade-off is higher unit cost than discrete logic at very low volumes, so consolidation pays off mainly in medium-to-high volume or space-constrained designs. In-system programmability via IEEE Std. 1149.1 JTAG simplifies field updates.
推荐
Sustaining Existing 5V Designs
The EPM9320RC208-15 is primarily sourced today to sustain existing 5.0 V designs that cannot be redesigned. Because Altera declared the device obsolete in 2007 per PDN0706, engineers maintaining legacy equipment rely on remaining distributor and broker stock to keep production lines running. The device's EEPROM-based MAX 9000 architecture and 208-pin RQFP footprint match the original design, so no PCB or firmware changes are required. The key consideration is supply-chain risk: independent-channel stock must be verified for authenticity and date code, and a long-term migration plan to the MAX V family should be developed. Drop-in family variants such as the EPM9320ARC208-15 extend the available supply pool.
推荐
Test and Measurement Instrumentation
The EPM9320RC208-15 fits test and measurement instrumentation where deterministic, non-volatile logic is needed for trigger generation, timing control, and interface sequencing. Its 15 ns pin-to-pin delay provides repeatable timing for trigger and gate logic, and the EEPROM configuration ensures the instrument boots into a known state without a configuration load cycle. The 208-pin RQFP package offers enough I/O for front-panel control, GPIB or parallel interfaces, and internal bus management. Because the device is 5.0 V, it interfaces naturally with legacy instrument backplanes. Designers should account for the obsolete status by qualifying alternate family variants and securing adequate stock for the instrument's production lifetime.
推荐
推荐产品汇总
工程参考数据： EPM9320RC208-15 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EPM9320ARC208-15 | EPM9320RC208-10 | EPM9320RC208-20 | EPM9320RC208-15N |
|---|---|---|---|---|---|
| Package | 208-pin RQFP | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same |
| Brand | Altera | Altera | Altera | Altera | Altera |
| Macro Cells | 320 | 320 | 320 | 320 | 320 |
| Usable Gates | 6,000 | 6,000 | 6,000 | 6,000 | 6,000 |
| Pin-to-Pin Delay | 15 ns | 15 ns | 10 ns (faster) | 20 ns (slower) | 15 ns |
| Supply Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Configuration Technology | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) |
| Lifecycle Status | Obsolete (PDN0706, 2007) | Obsolete | Obsolete | Obsolete | Obsolete |
关键差异点
- Non-volatile EEPROM configuration （对比 EPM570M256C5N)
- Drop-in family variants extend supply （对比 EPM9320ARC208-15)
- Speed-grade flexibility within the same footprint （对比 EPM9320RC208-10)
设计说明
The EPM9320RC208-15 is a 5.0 V core device and requires a well-regulated 5 V rail. Decouple each VCC pin with a 0.1 uF ceramic capacitor placed as close to the pin as possible, plus a bulk 10 uF capacitor per device. Because the part is EEPROM-based, it draws no configuration inrush current at power-up, but the 5 V rail must still ramp monotonically to avoid undefined logic states. Do not power the device from a 3.3 V rail - the MAX 9000 family is not specified for 3.3 V operation.
The 208-pin RQFP package has an exposed thermal pad that must be soldered to a matching copper land and connected to ground with multiple vias for thermal and electrical integrity. Route high-speed clock and bus signals on controlled-impedance traces and keep them away from the JTAG TCK/TMS lines to avoid coupling. Place the JTAG header close to the device and keep TCK, TMS, TDI, and TDO traces short and matched. Follow the manufacturer's RQFP land-pattern drawing for pad dimensions and solder-mask openings.
The most common pitfall is assuming 3.3 V I/O compatibility: the EPM9320RC208-15 is a 5.0 V device and its I/O levels are not 3.3 V tolerant on all pins, so level shifters or bus transceivers are required when interfacing 3.3 V logic. A second pitfall is sourcing: the device was declared obsolete in 2007 per PDN0706, so independent-channel stock must be verified for authenticity and date code. Always program and functionally test incoming parts before committing them to production.
合规信息
Compliance data was not present in the verified web data. The lead-free variant EPM9320RC208-15N exists (N suffix), but RoHS/REACH status for the base EPM9320RC208-15 could not be confirmed from the provided sources.
