EP4CE115F23C8N - Cyclone IV E FPGA 114K LE 484-BGA | Intel
料号： EP4CE115F23C8N ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $323.39 | $323.39 |
| 10 | $285.5 | $2,855.00 |
| 100 | $220 | $22,000.00 |
| 500 | $175 | $87,500.00 |
| 1,000 | $145 | $145,000.00 |
EP4CE115F23C8N 概述
A Field Programmable Gate Array (FPGA) is a reconfigurable semiconductor device whose logic fabric, routing, and I/O cells can be programmed by the customer after manufacture. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs), alongside simpler CPLDs, and above fixed-function ASICs in design flexibility. The Cyclone IV E family targets the mid-density segment, balancing cost, power, and performance for industrial, consumer, and communications designs.
Key features of the EP4CE115F23C8N include 114,480 logic elements arranged in an architecture of adaptive logic modules (ALMs), 432 embedded 18x18 multipliers for DSP-style signal processing, 280 general-purpose I/Os supporting LVDS, LVCMOS, SSTL, and other single-ended and differential standards, and dedicated embedded memory blocks totaling 3.8 Mbits. The device supports up to four general-purpose PLLs for clock management and serialization.
The Cyclone IV E architecture uses a 60 nm low-power process with a 1.2 V core supply, achieving substantially lower static and dynamic power than the previous Cyclone III generation. Configuration is supported via passive serial (PS), fast passive parallel (FPP), and JTAG modes using industry-standard SRAM-based programming cells. The 484-BGA FineLine BGA package offers a 1.0 mm ball pitch, suitable for multilayer PCBs in mid-to-high-complexity designs.
Typical applications for the EP4CE115F23C8N include industrial motor control and machine vision, video processing and display bridges, telecom line cards, automotive driver-assistance pre-processing, and embedded control in test and measurement equipment. The combination of high logic density, embedded multipliers, and rich I/O makes it well-suited for designs that previously required larger or more expensive FPGAs.
When designing with this device, plan power decoupling around each PLL region and use the Quartus II / Quartus Prime toolchain for synthesis, place-and-route, and timing closure. Verify signal-integrity on high-speed LVDS pairs and confirm ball-pattern compatibility against any proposed migration part before PCB respin.
This page synthesizes distributor pricing, package information, drop-in alternatives, and design considerations not found in a single manufacturer datasheet, helping engineers evaluate the EP4CE115F23C8N for new designs or as a replacement candidate in legacy projects.
直接替换替代料： EP4CE115F23C8N ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EP4CE115F23C8N （相同外形与封装尺寸） ——差异在于 Package, Process Technology, Embedded 18x18 Multipliers, Configuration Modes, Family.
快速对比工具——选择替代料号进行并排对比：
EP4CE115F23C7N
✅ 直接替换📋 参考替代料（不在目录中）
EP4CE115F23I7N
✅ 直接替换✓ 有现货
$87.95 / 个
查看数据手册 →EP4CE115F23C8N
✅ 直接替换✓ 有现货
$145 / 个
查看数据手册 →EP4CE115F23A7N
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
EP4CE115F23C9N
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
EP4CE115F23C8N
✅ 直接替换✓ 有现货
$145 / 个
查看数据手册 →EP4CE115F23C8N 最大额定值与电气特性
| Series | Cyclone IV E |
| Logic Elements | 114,480 LE |
| Embedded Memory | 3,981,312 bits (3.8 Mbit) |
| User I/O Count | 280 |
| Embedded 18x18 Multipliers | 432 |
| General-purpose PLLs | 4 |
| Process Node | 60 nm |
| Core Voltage | 1.2 V |
| 封装 | 484-ball FineLine BGA (F23) |
| Ball Pitch | 1.0 mm |
| 安装类型 | Surface Mount (BGA) |
| 工作温度 | 0C to +85C (Commercial) |
| Speed Grade | C8 |
| RoHS 状态 | Compliant |
EP4CE115F23C8N 484-ball fineline bga (f23) 引脚配置指南
EP4CE115F23C8N（484-ball fineline bga (f23) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： EP4CE115F23C8N.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EP4CE115F23C8N 适用于 6 应用s: Industrial Motor Control, Video Processing and Display Bridge, Telecom Line Card Interface, Automotive Driver-Assistance Pre-Processing, Test and Measurement Equipment, Embedded Control and Machine Vision.
Industrial Motor Control
The EP4CE115F23C8N suits industrial motor control with 114,480 logic elements for multi-axis FOC algorithms, 432 embedded 18x18 multipliers for Park/Clark transforms, and 280 I/Os for encoder, resolver, and PWM interfaces. At 1.2 V core, it dissipates less than older Cyclone III designs, fitting enclosed IP54 cabinets. Designers should use the Quartus Prime DSP Builder for floating-point motor loops and verify PWM update latency against the speed-grade C8 timing model.
推荐
Video Processing and Display Bridge
For HDMI-to-LVDS or MIPI-to-RGB bridges, the EP4CE115F23C8N's 432 embedded multipliers handle real-time color-space conversion (YUV422 to RGB888) at 1080p60 with headroom for scaling. The 3.8 Mbit embedded memory supports line-buffer storage without external SRAM. The 484-BGA F23 package allows routing of 24 LVDS pairs required for dual-channel LVDS displays. Engineers must consider HSIO bank placement for differential pairs during floorplanning.
推荐
Telecom Line Card Interface
Telecom line cards benefit from the EP4CE115F23C8N's rich I/O count (280 pins) for multi-port SERDES-less serial interfaces, 4 PLLs for clock synthesis across backplane domains, and 114K logic elements for protocol termination (e.g., custom Ethernet variants). The 60 nm low-power process reduces thermal load in sealed CO enclosures. Designers should reference the Cyclone IV E handbook for HSTL/SSTL I/O standards used in telecom backplanes.
推荐
Automotive Driver-Assistance Pre-Processing
Pre-processing for ADAS sensor fusion benefits from the EP4CE115F23C8N's 432 multipliers for radar FFT preprocessing, 114K logic elements for object-tracking state machines, and 280 I/Os for multi-sensor aggregation. For production automotive, designers should specify the F23A7N variant (AEC-Q100 not applicable to C8 commercial temp). The 484-BGA package supports high-density routing for multi-channel LVDS sensor inputs.
推荐
Test and Measurement Equipment
Test instruments use the EP4CE115F23C8N for waveform synthesis, protocol decoding, and DSP filtering. The 432 embedded 18x18 multipliers implement real-time digital filters at multi-MSPS rates, while 3.8 Mbit embedded memory holds sample buffers. The 280 user I/Os route high-speed LVDS ADC/DAC data and trigger logic. Designers should use TimeQuest timing analysis in Quartus Prime to close timing on the C8 speed grade.
推荐
Embedded Control and Machine Vision
Machine vision systems use the EP4CE115F23C8N to preprocess image data from CMOS sensors before passing to a host processor. The 432 multipliers accelerate Sobel, Laplacian, and morphology filters, while 114K logic elements implement custom region-of-interest engines. The 484-BGA F23 package provides sufficient I/O for multiple MIPI-CSI or LVDS camera lanes. Designers should consider external DDR memory for frame storage beyond the 3.8 Mbit on-chip memory.
推荐
推荐产品汇总
工程参考数据： EP4CE115F23C8N ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP4CE115F23C7N | EP4CE115F23I7N | EP4CE115F23A7N | EP4CE115F23C9N |
|---|---|---|---|---|---|
| Package | 484-ball FineLine BGA (F23) | 484-ball FineLine BGA (F23) - same | 484-ball FineLine BGA (F23) - same | 484-ball FineLine BGA (F23) - same | 484-ball FineLine BGA (F23) - same |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 114,480 | 114,480 | 114,480 | 114,480 | 114,480 |
| Embedded Memory (bits) | 3,981,312 | 3,981,312 | 3,981,312 | 3,981,312 | 3,981,312 |
| User I/O | 280 | 280 | 280 | 280 | 280 |
| Embedded 18x18 Multipliers | 432 | 432 | 432 | 432 | 432 |
| Speed Grade | C8 (commercial) | C7 (faster, premium) | I7 (industrial) | A7 (automotive) | C9 (slower, lower cost) |
| Operating Temperature | 0C to +85C | 0C to +85C | -40C to +100C | -40C to +125C | 0C to +85C |
| Pin Compatibility | Reference | Yes (drop-in) | Yes (drop-in) | Yes (drop-in) | Yes (drop-in) |
关键差异点
- Highest logic density in Cyclone IV E family （对比 EP4CE40F23C8N)
- Industrial temperature variant available in same package （对比 EP4CE115F29I7N)
- Commercial temperature and C8 speed grade for cost-sensitive designs （对比 EP4CE115F23C7N)
设计说明
The 484-ball FineLine BGA package with 1.0 mm pitch requires at least a 6-layer PCB with microvia (HDI) construction or via-in-pad for reliable assembly. Plan escape routing in groups of 2-3 signals per row to avoid crossing power/ground planes. Use the Cyclone IV E device handbook ball map and your PCB CAD library to verify ball assignment against the bank I/O plan before fabrication. Decoupling: place 0.1uF X7R capacitors under the package within 5 mm of each power ball group.
The EP4CE115F23C8N requires a 1.2 V core supply (VCCINT), a 2.5 V or 3.3 V auxiliary supply (VCCAUX), and per-bank I/O supplies (VCCIO). Estimate worst-case core current at approximately 1.5-2.0 A under full DSP utilization; derate the regulator by at least 25% for margin. Power sequencing requires VCCINT to ramp before VCCAUX, with a maximum delta of 200 mV during ramp to prevent latch-up - use a sequencer IC if your regulator lacks built-in tracking.
Common pitfalls include: (1) forgetting that configuration mode (PS vs FPP vs JTAG) is selected by MSEL pins - wire them correctly to avoid bricking during programming; (2) underestimating the JTAG chain length when using both a USB-Blaster and a microcontroller debugger on the same TCK/TMS; (3) neglecting to enable the CRC error check during configuration in safety-critical designs; (4) ignoring the need for an external configuration device (e.g., EPCS) when using passive serial mode. Review the Cyclone IV E handbook configuration chapter before board bring-up.
合规信息
RoHS and REACH compliant per Altera/Intel product page. C8 commercial temperature grade; not AEC-Q100 - choose A7N variant for automotive. Lead-free BGA balls; halogen-free per JEDEC JS709.