STMicroelectronics

LM2903WDT - Dual Open-Collector Comparator | STMicroelectronics

料号: LM2903WDT ✓ 量产中
0.4 mA Vdss 25 nA Id 8-pin SOIC Package
最小起订量: 1 |

LM2903WDT 概述

The STMicroelectronics LM2903WDT is a low-power dual differential voltage comparator with an open-collector output configuration, supplied in an 8-pin SOIC package. The device combines two independent comparator channels, a typical supply current of 0.4 mA, input offset current of 25 nA, and an input offset voltage of 250 mV. Its rail-to-rail input capability and low-power operation make it suitable for general-purpose analog signal conditioning, threshold detection, and industrial control circuits.

A voltage comparator is an analog integrated circuit that compares one input voltage with another and changes its output state when the differential input crosses a switching threshold. The LM2903 belongs to the comparator hierarchy, where a comparator IC sits between basic analog signal-conditioning circuits and higher-level control systems. Each channel can compare an external signal against a reference voltage, allowing a logic-compatible indication of whether the signal is above or below the selected threshold.

The LM2903WDT provides two comparator channels in one 8-pin SOIC package. Its open-collector outputs can sink current from a pulled-up supply while placing the output in a high-impedance state when inactive. This arrangement supports wired logic, relay-driver interfaces, and systems that require multiple open-collector outputs sharing a bus. The low 0.4 mA supply current is valuable in battery-powered or continuously monitored equipment where comparator power consumption contributes directly to standby energy use.

The stated 250 mV input offset voltage and 25 nA input offset current define the practical accuracy limits around the switching point. Input offset voltage is the difference between the two inputs required to move the output through its switching region, while input offset current represents the residual current entering the input terminals. These values should be considered when the application requires a precise switching threshold rather than general threshold detection.

Typical uses include battery monitoring, sensor-limit detection, industrial control interfaces, window or level comparators, and low-power monitoring subsystems. The comparator can operate directly from a low-voltage supply and accept signals extending across the supply range, reducing the need for separate input attenuation when the monitored voltage remains within safe absolute limits. The two channels may be used independently or together for window comparison, provided their input and output arrangements satisfy the application requirements.

Designers should account for open-collector output behavior by adding an appropriate pull-up resistor and verifying the pull-up voltage against the connected logic. Input pins must remain within the device's permitted common-mode and absolute-maximum limits. Because the offset characteristics contribute uncertainty at the threshold, applications requiring tighter accuracy should add input attenuation, filtering, or external precision references. This page combines the confirmed ordering information with drop-in alternatives, comparison guidance, and practical circuit-design considerations.

直接替换替代料: LM2903WDT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM2903WDT (相同外形与封装尺寸) ——差异在于 Package, Output Type, Input Offset Voltage, Input Bias Current, Number of Channels.

Texas Instruments
Package: 8-pin SOIC (D)
Input Offset Voltage: 0.37 mV
Input Bias Current: 3.5 nA
对比 LM2903WDT →
Texas Instruments
Package: 8-SOIC
Output Type: Open-collector, open-drain
对比 LM2903WDT →
STMicroelectronics
Package: SOIC-8
Output Type: Open Collector
Input Offset Voltage: 2 mV (typical)
对比 LM2903WDT →

LM293D

✅ 直接替换
Texas Instruments
📦 SOIC-8
Dual differential comparator · Two independent comparators · Open-collector, open-drain · Rail-to-rail · Single supply or split supply

联系询价

查看数据手册 →

LM393DT

✅ 直接替换
STMicroelectronics
📦 SOIC-8
2 · 2 V to 36 V · ±1 V to ±18 V · 0.4 mA (typical) · 2 mV (typical) · 25 nA (typical) · 1.3 µs (typical) · Open Collector

✓ 有现货

$0.0461 / 个

查看数据手册 →

LM2903WDT

✅ 直接替换
STMicroelectronics
📦 SOIC-8
Dual differential voltage comparator · 2 channels · Open-collector · Differential · Rail-to-rail · 0.4 mA · 25 nA · 250 mV

联系询价

查看数据手册 →

LM2903BIDR

✅ 直接替换
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

联系询价

查看数据手册 →

LMV393

✅ 直接替换
📦 SOIC-8
Identified as pin-compatible for a 5 V application; switching-threshold behavior and common-mode range differ from the LM2903WDT's 250 mV offset specification

📋 参考替代料(不在目录中)

LM2903WDT 最大额定值与电气特性

Product Type Dual differential voltage comparator
Comparator Channel Count 2 channels
输出类型 Open-collector
Input Type Differential
Common-Mode Input Capability Rail-to-rail
电源电流 0.4 mA
Input Offset Current 25 nA
Input Offset Voltage 250 mV
封装 8-pin SOIC
引脚数量 8 pins
安装类型 Surface mount
AEC-Q100 Qualification Qualified and characterized according to AEC Q100

LM2903WDT 8-pin soic 引脚配置指南

LM2903WDT(8-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LM2903WDT 的 8-pin soic 封装引脚图

暂无详细引脚数据: LM2903WDT.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LM2903WDT 适用于 6 应用s: Battery Voltage Monitoring, Industrial Sensor Limit Detection, Power Supply Overvoltage Detection, Motor and Solenoid Control, Battery-Powered IoT Sensing, Window Comparator Systems.

⚡

Battery Voltage Monitoring

The LM2903WDT suits low-power battery threshold detection because its two channels can monitor charge and discharge limits while the device consumes a typical 0.4 mA. One channel can compare the battery voltage with an upper reference and the other with a lower reference, producing separate open-collector alerts. The rail-to-rail input capability is useful when the monitored signal approaches the operating supply, although the 250 mV input offset must be included in the threshold-error budget. For higher-precision battery management, use a windowing circuit, input scaling, or a more accurate reference rather than assuming the comparator threshold is exact.

🏭

Industrial Sensor Limit Detection

The LM2903WDT can convert a conditioned industrial sensor signal into a digital limit event without adding substantial standby load. Its two differential channels support separate high- and low-limit checks, while the open-collector outputs can drive an isolated relay, optocoupler input, or PLC interface through a pull-up network. The 25 nA input offset current is favorable for high-impedance sensor nodes, while the 250 mV input offset voltage sets the basic accuracy of a direct threshold comparison. Industrial designs should also verify the supported input common-mode range, supply limits, and noise margin at the actual field voltage.

⚡

Power Supply Overvoltage Detection

The LM2903WDT can monitor a divided power rail and assert an open-collector fault signal when the voltage crosses a defined limit. With two channels, a single device can supervise both upper and lower boundaries, reducing component count in a power-supply controller. Its rail-to-rail input characteristic supports detection near the supply range, and the typical 0.4 mA supply current adds little overhead to continuously monitored systems. Because the comparator does not regulate the rail, its 250 mV offset translates into a scaled threshold uncertainty that must be included in the power system's fault-margin calculation.

🔧

Motor and Solenoid Control

The LM2903WDT is suitable for detecting motor-current or actuator-supply thresholds before driving a discrete power stage. Its differential inputs allow a scaled current-sense signal to be compared with a reference, and the open-collector output can enable a gate driver, relay, or protection latch. The typical 0.4 mA supply current is useful where continuous monitoring matters, while two channels can support independent current and temperature limits. Designers must ensure the comparator remains inside its common-mode range throughout startup, and must account for the 250 mV offset when setting motor-current trip points.

🧩

Battery-Powered IoT Sensing

The LM2903WDT fits battery-powered IoT sensing when a wake-up node must be evaluated without continuously powering a higher-power measurement chain. The device's typical 0.4 mA supply current and two comparator channels allow a compact node to compare a sensor output against a threshold and control a downstream power rail. Open-collector outputs can be pulled up to a low-energy logic voltage or used to enable a load switch. The 25 nA input offset current is particularly useful with high-impedance sensors, although the 250 mV offset voltage should be checked against the minimum sensor signal that must trigger an event.

📊

Window Comparator Systems

The LM2903WDT naturally supports window comparison by assigning its two channels to lower and upper thresholds. The resulting open-collector outputs can identify whether a monitored voltage is below the lower limit, inside the permitted range, or above the upper limit. This arrangement is useful for power rails, signal sources, temperature probes, and charging systems. Both channels share an 8-pin SOIC package, reducing board area, and the typical 0.4 mA supply current supports low-power operation. To obtain dependable limits, include the 250 mV offset of each channel in the worst-case threshold calculation and allow for offset drift across temperature.

What is the LM2903WDT?
The LM2903WDT is an STMicroelectronics low-power dual differential voltage comparator in an 8-pin SOIC package. It contains two independent comparator channels with open-collector outputs and rail-to-rail input capability. According to the manufacturer datasheet, the device is also qualified and characterized according to AEC Q100, making it suitable for general-purpose and automotive-qualified design platforms.
What is the operating voltage of LM2903WDT?
The LM2903WDT operates from a dual-supply voltage whose permitted range must be selected from the manufacturer datasheet before design release. The confirmed product characteristics include a 0.4 mA typical supply current, 25 nA input offset current, and 250 mV input offset voltage. Request the current datasheet and use its electrical-characteristics table to confirm the exact supply limits for the selected temperature grade.
How many comparators are in the LM2903WDT?
The LM2903WDT contains two independent differential comparator channels in one 8-pin SOIC package. Each channel has a noninverting input, an inverting input, and an open-collector output. The manufacturer describes the LM2903 as a low-power dual voltage comparator, so the device can implement two threshold decisions without using two separate comparator packages.
What are the key specifications of LM2903WDT that engineers should know?
The LM2903WDT is a dual, rail-to-rail, open-collector comparator with a typical supply current of 0.4 mA, 25 nA input offset current, and 250 mV input offset voltage. It is packaged in an 8-pin SOIC. The manufacturer datasheet also identifies AEC Q100 qualification and characterization, while open-collector outputs require external pull-up circuitry for normal logic-level operation.
Where can I download the LM2903WDT datasheet PDF?
The official LM2903WDT datasheet PDF is available from the STMicroelectronics product-document link on this page. It is the primary reference for the pin description, recommended operating conditions, electrical characteristics, application information, and AEC Q100 qualification statement. Use the ST document revision corresponding to the current production device rather than a generic LM2903 page from another manufacturer.
Where can I find the LM2903WDT pinout?
The LM2903WDT pinout is shown in the manufacturer datasheet under the pin configuration and pin-description sections. It is an 8-pin SOIC device containing two comparator channels. Because a complete pin-to-pin map was not confirmed by an official diagram in the indexed material, use the STMicroelectronics pin-description table when assigning PCB tracks and connector signals.
Can LM2903WDT replace LM393?
The LM2903WDT can serve as a candidate for LM393-based dual-comparator circuits when the package, pin functions, supply limits, output pull-up method, and electrical limits all match. The LM2903WDT has open-collector outputs, two differential channels, and an 8-pin SOIC package. Confirm the selected replacement's exact parameters and absolute-maximum ratings before production use.
What is the best drop-in replacement for LM2903WDT?
The closest drop-in choices are 8-pin SOIC dual open-collector comparators with the same two-channel pin arrangement. Candidates include the STMicroelectronics LM293D and LM393DT, the ROHM LM2903WDT, the Texas Instruments LM2903, and the Texas Instruments LMV393 where its input common-mode limits meet the design requirements. Review the manufacturer comparison before substituting any part.
LM2903WDT vs LM2903 — are they pin-compatible?
The STMicroelectronics LM2903 and the Texas Instruments LM2903 are dual comparators associated with the same 8-pin architecture, but manufacturer suffix codes and production variants can differ. For PCB reuse, verify that the proposed orderable part uses the same SOIC-8 footprint, pin functions, open-collector outputs, and compatible supply and common-mode limits. Package similarity alone does not establish functional interchangeability.
When should I choose LM2903WDT over LMV393?
Choose the LM2903WDT when the circuit specifically calls for the LM2903 electrical and qualification profile, particularly when AEC Q100 qualification is relevant. The LMV393 is identified as pin-compatible in a 5 V common-mode design, but its detailed voltage limits and switching characteristics must be checked. The better choice is the device whose guaranteed operating region covers the actual signal and supply conditions.
Is LM2903WDT suitable for low-power sensor and battery monitoring?
The LM2903WDT is suitable for low-power threshold monitoring because its typical supply current is 0.4 mA and both channels are integrated in one package. The rail-to-rail input characteristic supports comparisons near the supply rails when operating within the manufacturer's absolute-maximum limits. Its 250 mV input offset voltage should be included in the threshold-error budget for precision battery or sensor measurements.
Why does the LM2903WDT need a pull-up resistor?
Each LM2903WDT output is open-collector, so the device can pull the output low but cannot actively drive it high. An external pull-up resistor establishes the high logic level and allows multiple comparators to share a wired bus. Select the resistor from the sink-current, rise-time, power, and logic-voltage requirements of the complete circuit rather than using an arbitrary value.
How much does the LM2903WDT cost and where is it available?
Current unit pricing, stock, and lead time for the LM2903WDT are handled through the Request a Quote form on this page. The form supports exact-MPN sourcing and avoids stale quantity-break information. Submit the required quantity, target packaging, delivery location, and date-sensitive production schedule to obtain a current quotation and availability confirmation.
What is the lead time for LM2903WDT?
Lead time for the LM2903WDT depends on order quantity, factory schedule, and required delivery date. Use the Request a Quote form on this page to request a current production and logistics commitment rather than relying on a historical distributor estimate. Include your scheduled build date so the supplier can distinguish standard stock from factory allocation.
Is the LM2903WDT currently in stock?
Current stock status for the exact LM2903WDT orderable part should be confirmed through the Request a Quote form on this page. The form can identify available inventory and factory allocation for the requested quantity and packaging configuration. Because stock changes rapidly, avoid treating a search-result availability message as a reservation or a guaranteed allocation.

工程参考数据: LM2903WDT ——对比、设计指导和合规信息。

选型指南

Choose the LM2903WDT when the design requires a low-power dual open-collector comparator with a 0.4 mA typical supply current, 25 nA input offset current, 250 mV input offset voltage, and an AEC-Q100-qualified automotive-oriented device family. The LM293D and LM393DT are sensible STMicroelectronics alternatives when their electrical limits better fit the design, but their pin-compatible status alone does not establish identical threshold accuracy. The ROHM LM2903WDT may fit an existing qualified BOM, while the Texas Instruments LM2903 provides another dual-comparator source in the same footprint family. Consider the LMV393 only after checking its common-mode range, switching characteristics, supply limits, and automotive qualification. For every candidate, verify the complete pin map, open-collector output ratings, pull-up voltage, input offset limits, operating temperature range, and absolute-maximum ratings before releasing a PCB or production order.

与替代料对比

参数 本产品 LM293D LM393DT LM2903WDT LM2903 LMV393
Brand STMicroelectronics STMicroelectronics STMicroelectronics ROHM Semiconductor Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Comparator Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector
Input Configuration Dual differential Dual differential Dual differential Dual differential Dual differential Dual differential

关键差异点

  • Two-channel integration in an 8-pin SOIC package (对比 LMV393)
  • Low confirmed supply current (对比 LM2903)
  • Defined input-offset characteristics (对比 LM293D)
  • Open-collector output in a common 8-pin footprint (对比 LM393DT)

设计说明

Do not treat an open-collector output as a push-pull logic output. Each channel requires an external pull-up resistor to establish its inactive high level. Size the resistor from the permitted output sink current, desired rise time, pull-up voltage, and continuous power dissipation. Also check that the downstream logic recognizes the resulting high voltage and that only the intended comparator channel can pull the shared bus low.

Estimated: using the confirmed typical supply current of 0.4 mA and a 5 V supply, the LM2903WDT supply power is 0.4 mA multiplied by 5 V, or 2.0 mW. The estimate excludes comparator output pull-up current, input bias effects, and dynamic transients. Use it as a comparator-only baseline and add the pull-up network's switching and leakage loads when calculating total standby power.

Include the 250 mV input offset voltage when defining switch-on and switch-off thresholds, and use the datasheet limit rather than only the typical value when error margins matter. Differential input noise can also move the switching point. For precision applications, add hysteresis, filter excessive input noise, or use a precision reference and an amplifier with gain ahead of the comparator.

Place the pull-up resistor close to the open-collector output so that the trace has minimum capacitance and sensitivity to induced noise. Keep comparator input traces short, route them away from switching nodes, and use a quiet ground return. If both channels monitor slow, high-impedance signals, consider guarding or guarding techniques around the input nodes to reduce leakage-induced offset.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer datasheet states that the LM2903 family is qualified and characterized according to AEC Q100 and Q003, or equivalent. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

数据核验日期: 2026-11-13 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LM2903WDT datasheet LM2903WDT pinout LM2903WDT datasheet pdf LM2903WDT equivalent LM2903WDT replacement LM2903WDT vs LMV393 LM2903WDT SOIC-8 footprint LM2903WDT open collector output STMicroelectronics LM2903WDT LM2903WDT low power comparator LM2903WDT price LM2903WDT stock LM2903 dual comparator cross reference LM2903WDT application circuit

相关元器件 & 术语

STMicroelectronics LM2903WDT LM2903 LM293D LM393DT LMV393 ROHM Semiconductor Texas Instruments dual differential comparator voltage comparator analog comparator IC open-collector output rail-to-rail input input offset voltage input offset current supply current SOIC-8 surface-mount package AEC-Q100 industrial control battery monitoring sensor threshold detection window comparator wired logic
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情