XC4VSX55-11FF1148I - 55,296-Cell Virtex-4 SX FPGA | AMD
料号: XC4VSX55-11FF1148I ✗ 停产XC4VSX55-11FF1148I 概述
A field-programmable gate array is a semiconductor device whose digital logic and interconnect are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device, a reconfigurable semiconductor, and a member of the broader digital IC family. Virtex-4 SX devices target high-performance signal processing, communications, networking, embedded systems, and test equipment where parallel processing, high pin count, and flexible I/O are valuable.
The XC4VSX55-11FF1148I provides 55,296 logic cells organized into 6,144 configurable logic blocks. Its listed internal frequency is 1,028 MHz, while a related FFG1148 configuration is described elsewhere as supporting up to 1,205 MHz under its own operating conditions. The device includes 640 user I/O in a 1,148-ball FCBGA package, providing substantial connectivity for parallel buses, memory interfaces, high-speed links, and mixed-signal interfaces.
The -11 suffix denotes the device speed grade, while the 1148 package code identifies the high-ball-count FCBGA footprint. The I suffix identifies the industrial-temperature ordering variant, and the package construction is described as lead-free and RoHS compliant. Configuration data can be loaded through supported FPGA configuration modes, including serial or parallel paths defined by the Virtex-4 device architecture.
Typical uses include high-throughput communications, video and image processing, industrial control, networking equipment, test and measurement, and high-speed interface aggregation. The large logic-cell count allows parallel datapaths and substantial buffering, while DSP blocks accelerate multiply-accumulate operations used in filtering and signal processing. The 1,148-ball package also supports dense power, ground, clock, configuration, and user-I/O assignments.
PCB implementation must follow the AMD Virtex-4 package pinout and power-guidance documents exactly. Decoupling, layer transitions, ball escape routing, clock integrity, configuration access, and thermal management require careful planning because the large BGA footprint presents difficult routing and assembly constraints. A replacement should match the exact speed grade, temperature grade, package, configuration, and device resources.
This page consolidates the device identity, package characteristics, lifecycle considerations, design guidance, and technically qualified replacement options into a practical engineering reference. It also distinguishes exact-footprint alternatives from Virtex-4 devices that use different packages and therefore require redesigned PCB layouts.
直接替换替代料: XC4VSX55-11FF1148I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC4VSX55-11FF1148I (相同外形与封装尺寸) ——差异在于 Package Type, Device Type, Mounting Type, Operating Temperature, User I/O.
XC4VSX55-11FFG1148I
✅ 直接替换📋 参考替代料(不在目录中)
XC4VSX55-11FF1148C
✅ 直接替换联系询价
查看数据手册 →XC4VSX55-11FFG1148C
✅ 直接替换联系询价
查看数据手册 →XC4VSX55-11FFG1148CS2
✅ 直接替换📋 参考替代料(不在目录中)
XC4VSX55-11FF1148I 最大额定值与电气特性
| Device Type | Virtex-4 SX field-programmable gate array |
| Logic Cells | 55,296 cells |
| Configurable Logic Blocks | 6,144 CLBs |
| User I/O | 640 I/O |
| 封装 | 1,148-ball FCBGA |
| Package Type | FBGA-1148 |
| Process Technology | 90 nm CMOS |
| Internal Frequency | 1,028 MHz |
| Speed Grade | -11 |
| 工作温度 | 0°C to +85°C |
| 电源电压 | 1.2 V |
| Logic Family | CMOS |
| 安装类型 | Surface mount |
| RoHS 状态 | Lead-free and RoHS compliant |
XC4VSX55-11FF1148I fbga-1148 引脚配置指南
XC4VSX55-11FF1148I(fbga-1148 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC4VSX55-11FF1148I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC4VSX55-11FF1148I 适用于 6 应用s: Industrial Control and Automation, Communications and Network Equipment, Video and Image Processing, Test and Measurement Systems, High-Speed Interface Aggregation, Signal Processing and DSP.
Industrial Control and Automation
The XC4VSX55-11FF1148I fits industrial controllers that combine parallel machine I/O with substantial digital logic in one device. Its 640 user I/O and 55,296 logic cells allow teams to combine control logic, communication protocols, event logging, and diagnostics without using multiple programmable logic devices. The 0°C to +85°C industrial-temperature rating supports equipment operating across controlled factory environments. The 1,148-ball FCBGA provides dedicated routing resources but demands careful BGA layout, layer-transition planning, thermal analysis, and decoupling. Engineers should use the AMD package files for ball assignments and verify each power domain against the product specification before fabrication.
推荐
Communications and Network Equipment
The XC4VSX55-11FF1148I is suitable for communications equipment requiring many parallel lanes, deep programmable logic, and flexible interface assignments. Its 640 I/O can support control buses, backplanes, status signals, and multiple data interfaces, while 6,144 CLBs support protocol engines, packet processing, and buffering. The -11 speed grade provides a defined performance class for timing-sensitive designs. At the 1,028 MHz listed internal frequency, system architects should treat this value as a device characteristic rather than a guaranteed user-clock rate. Proper clocking, controlled-impedance routing, and power conditioning are essential for reliable data-path operation.
推荐
Video and Image Processing
The XC4VSX55-11FF1148I can support parallel video pipelines, image filtering, pixel transport, frame timing, and control logic because it combines 55,296 logic cells with 640 I/O. Parallel datapaths are easier to implement efficiently in FPGA fabric than in a general-purpose processor, while the high pin count provides room for parallel pixel buses, memory interfaces, and synchronization signals. The large FCBGA also supports dense power and ground distribution, reducing loop impedance when implemented correctly. Designers should constrain timing for video pixel rates, use source-synchronous interfaces where required, and validate the configuration scheme before committing the board layout.
推荐
Test and Measurement Systems
The XC4VSX55-11FF1148I is well suited to modular test and measurement systems that need parallel stimulus generation, acquisition control, timing logic, and communication processing in a single device. The 6,144 CLBs allow multiple instrument channels to share a common architecture, while 640 I/O provides connectivity to converters, memories, trigger logic, and host interfaces. Its industrial-temperature grade is appropriate for controlled test environments. Signal-integrity work must include controlled-impedance routing, proper termination, clock jitter budgeting, and isolated power distribution. The device's obsolete lifecycle also makes component traceability and configuration-bitstream compatibility important during long-lived test-system programs.
推荐
High-Speed Interface Aggregation
The XC4VSX55-11FF1148I can aggregate multiple narrow interfaces into a parallel FPGA datapath, making it useful in interface concentrators, protocol bridges, and embedded control subsystems. Its 640 I/O provides substantial pin-level parallelism, while 55,296 logic cells support buffering, translation, state machines, and protocol-specific transforms. The -11 speed grade should be included in timing-closure calculations rather than treating the listed 1,028 MHz internal frequency as a universal operating clock. PCB implementation requires exact BGA escape routing, matched-length groups where required, and clean separation between high-speed, low-speed, power, and ground paths.
推荐
Signal Processing and DSP
The XC4VSX55-11FF1148I supports parallel filtering, digital conversion, correlation, waveform generation, and other fixed-point signal-processing tasks implemented in programmable fabric. The 55,296 logic cells and 6,144 CLBs provide parallel lanes that can outperform sequential software execution for suitable workloads. Its 640 I/O allows direct connection to converters, parallel memories, and custom accelerator logic. DSP-specific block counts are not established for this ordering code, so projects requiring hard DSP resources should confirm the exact device resource map before architecture selection. Clock jitter, I/O standards, pipeline latency, and timing margins should be evaluated together to determine the achievable sample rate.
推荐
推荐产品汇总
工程参考数据: XC4VSX55-11FF1148I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC4VSX55-11FFG1148I | XC4VSX55-11FF1148C | XC4VSX55-11FFG1148C | XC4VSX55-11FFG1148CS2 |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 1,148-ball FCBGA | 1,148-ball FCBGA | 1,148-ball FCBGA | 1,148-ball FCBGA | 1,148-ball PBGA |
| Logic Cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells |
| Configurable Logic Blocks | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs |
| User I/O | 640 I/O | 640 I/O | 640 I/O | 640 I/O | 640 I/O |
| Internal Frequency | 1,028 MHz | 1,028 MHz | 1,028 MHz | 1,028 MHz | 1,205 MHz maximum |
| Speed Grade | -11 | -11 | -11 | -11 | -11 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
关键差异点
- Industrial-temperature ordering option (对比 XC4VSX55-11FF1148C)
- Full Virtex-4 SX resource allocation in one 1,148-ball device (对比 XC4VFX60-11FF1152C)
- Deterministic -11 speed-grade selection (对比 XC4VSX55-12SFG363C)
设计说明
Use the official Virtex-4 package files and exact 1,148-ball pinout when defining the PCB footprint. Route power, ground, configuration pins, clocks, and user I/O according to their assigned balls rather than approximating the package with a generic BGA. Pay particular attention to layer transitions and escape paths because the dense FCBGA requires a manufacturing process capable of producing the specified ball geometry and pad definition.
Implement the manufacturer-defined core and I/O supply rails as separate, low-impedance distribution networks with local decoupling at the device balls. Follow the product specification for capacitor quantity, voltage rating, placement, and permissible ripple. Estimated core dissipation is (VIN - VOUT) multiplied by Icore, so actual consumption depends on design activity and clocking. Validate the power tree at maximum operating activity and elevated temperature rather than assuming nominal design activity represents the worst case.
Constrain clocks and high-speed interfaces with device-supported I/O standards and suitable external terminations. Account for package and board delay when budgeting timing margins, and keep clock distribution symmetrical where the architecture permits. The listed 1,028 MHz internal frequency is not a substitute for a completed timing analysis; achievable system frequency depends on the selected clock path, I/O standard, routing, loading, speed grade, and design margins.
合规信息
The component is identified as lead-free and RoHS compliant. No explicit REACH, halogen-free, conflict-minerals, or automotive-qualification statement was identified.