XC4VSX55-11FFG1148C - 55,296-Cell Virtex-4 SX FPGA | AMD
料号: XC4VSX55-11FFG1148C ✗ 停产XC4VSX55-11FFG1148C 概述
A field-programmable gate array, or FPGA, is a semiconductor device whose internal digital circuits are configured after manufacture. An FPGA sits within the programmable-logic hierarchy, combining configurable logic blocks, block RAM, DSP resources, programmable I/O, and dedicated clocking resources. Unlike a fixed-function application-specific integrated circuit, an FPGA permits logic, interfaces, and parallel processing pipelines to be revised through a programmable configuration file.
The Virtex-4 SX architecture provides 6,144 configurable logic blocks representing 55,296 total logic cells. Its 640 I/O sites support connections among processors, memory, network interfaces, video processing, industrial controls, and test equipment. The -11 designation identifies the performance grade, while the FFG package designation and 1,148-ball layout support dense, high-pin-count board construction using an advanced BGA footprint.
This device uses CMOS programmable logic and includes dedicated resources for clocks, memory, digital signal processing, and high-speed serial connectivity. Its internal clock figure is listed as 1,028 MHz, while an alternative listing states a 1,205 MHz maximum clock. Actual achievable operating frequency depends on the selected clocking resources, routing path, logic depth, I/O standard, target speed, and timing constraints rather than a single headline value.
Typical applications include industrial automation and control, telecommunications equipment, video and image processing, network interface equipment, instrumentation, and embedded parallel-processing systems. The 640 I/O count is especially useful where multiple buses, memory interfaces, converters, and communication links must coexist without requiring several external programmable devices.
PCB implementation requires careful BGA-layout control, power and ground-plane planning, and matched routing for high-speed interfaces. Use the official Virtex-4 package pinout files when assigning balls, and validate every power, configuration, clock, differential-pair, and I/O-standard connection against the complete manufacturer documentation before fabrication.
This page combines device specifications, package information, selection guidance, practical design considerations, and verified same-package alternatives to support a technically sound FPGA design review and sourcing decision.
直接替换替代料: XC4VSX55-11FFG1148C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC4VSX55-11FFG1148C (相同外形与封装尺寸) ——差异在于 Operating Temperature, Package Type, Device Type, Mounting Type.
XC4VSX55-12FF1148C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VSX55-10FFG1148C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC4VSX55-10FF1148I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VSX55-11FF1148I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC4VSX55-11FFG1148I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VSX55-11FFG1148C 最大额定值与电气特性
| Device Type | Virtex-4 SX field-programmable gate array |
| Logic Cells | 55,296 cells |
| Configurable Logic Blocks | 6,144 CLBs |
| User I/O | 640 I/O |
| Internal Clock Frequency | 1,028 MHz |
| 最大时钟频率 | 1,205 MHz |
| Logic Family | CMOS |
| Speed Grade | -11 |
| 工作温度 | 0°C to 85°C |
| Package Type | FCBGA-1148 |
| Ball Count | 1,148 balls |
| Device Family | Virtex-4 SX |
| Programmable Logic | CMOS configurable logic and routing resources |
| I/O Count | 640 inputs and 640 outputs |
| 安装类型 | Surface-mount BGA |
| Lead-Free Packaging | Lead-free FFG package designation |
XC4VSX55-11FFG1148C fcbga-1148 引脚配置指南
XC4VSX55-11FFG1148C(fcbga-1148 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC4VSX55-11FFG1148C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC4VSX55-11FFG1148C 适用于 6 应用s: Industrial Automation and Control, Telecommunications Network Interface, Video and Image Processing, Instrumentation and Test Equipment, Embedded Parallel Processing, Industrial Sensor and Acquisition Hub.
Industrial Automation and Control
The AMD XC4VSX55-11FFG1148C is well suited to industrial control systems that combine deterministic parallel logic with numerous external connections. Its 55,296 logic cells and 6,144 configurable logic blocks can support motion sequencing, machine interlocks, counter inputs, actuator control, and protocol handling without relying on several smaller programmable devices. The 640 I/O sites provide room for encoder, sensor, fieldbus, and digital-output interfaces. Operating across 0°C to 85°C supports controlled industrial environments. Board designers should assign dedicated power, ground, configuration, and clock balls using the official package files, then reserve solid copper areas for high-current output groups and carefully route high-speed differential signals.
推荐
Telecommunications Network Interface
The AMD XC4VSX55-11FFG1148C can implement packet-processing, framing, buffering, and interface logic in telecommunications equipment. A single device offers 55,296 logic cells for parallel datapaths, 640 I/O for multiple buses and chip-to-chip links, and dedicated programmable resources that can accelerate fixed-format operations. This is useful in line cards, protocol adapters, traffic conditioners, and test equipment where traffic must be routed with low latency. Designers should use the Virtex-4 clocking and SelectIO resources according to the manufacturer guidelines, preserve signal integrity with controlled-impedance routing, and verify that the selected I/O standard and external memory interface operate correctly across the full -11 speed-grade timing envelope.
推荐
Video and Image Processing
The AMD XC4VSX55-11FFG1148C can support parallel video pipelines, pixel transformations, test-pattern generation, and image capture control. Its 55,296 logic cells provide substantial parallel datapath capacity, while 640 I/O allow simultaneous connection to image sensors, frame buffers, converters, and display controllers. A hard-logic design can use configurable logic blocks for timing and control and dedicated resources for suitable arithmetic and memory operations. The principal constraints are routing bandwidth, memory bandwidth, and achievable clock rate rather than simple pin count. Implement the design with registered pipeline boundaries, constrain timing according to the selected clocking resources, and complete signal-integrity testing on a prototype because BGA pad and board transitions can affect high-speed video interfaces.
推荐
Instrumentation and Test Equipment
The AMD XC4VSX55-11FFG1148C is appropriate for modular instrumentation that must combine sequencing, acquisition control, data analysis, and communications. The 55,296 logic cells can implement trigger logic, measurement engines, timing generators, and digital pattern processors, while 640 I/O permit direct connection to converters, memories, front-panel controls, and host interfaces. Parallel processing can be distributed across several configurable pipelines to improve throughput. For laboratory-grade equipment, separate analog and digital sections, use a low-noise distribution network for sensitive converters, and ensure that clock jitter, skew, and return paths are controlled. The manufacturer timing constraints and package power requirements should form the basis of schematic and PCB validation.
推荐
Embedded Parallel Processing
The AMD XC4VSX55-11FFG1148C is useful for embedded systems whose workloads benefit from configurable parallel execution, such as data filtering, packet classification, signal conditioning, and custom cryptographic pipelines. The architecture provides 55,296 logic cells across 6,144 configurable logic blocks, allowing multiple operations to run concurrently instead of relying on a sequential instruction stream. Its 640 I/O also supports concurrent access to external memories and accelerators. Developers should partition the design into independently timed pipelines, avoid uncontrolled fanout, and register signals at pipeline boundaries. Power delivery must cover both logic and I/O demand simultaneously, while thermal analysis should account for the concentrated activity typical of dense parallel processing.
推荐
Industrial Sensor and Acquisition Hub
The AMD XC4VSX55-11FFG1148C can serve as the central programmable controller in a multi-channel sensor or data-acquisition hub. Its 640 I/O sites permit concurrent interfacing with sensor conditioning circuits, multiplexers, analog converters, memory devices, and communication modules. The 55,296 logic cells can handle channel sequencing, calibration tables, digital filtering, fault detection, and data packaging in parallel. Because many sensor systems combine low-level analog signals with high-speed digital links, the FPGA should be placed on a controlled reference plane with careful isolation between sensitive and high-switching-current sections. Validate converter interfaces and memory timing in hardware, and use the official ball map to avoid conflicts among configuration, clock, and user I/O assignments.
推荐
推荐产品汇总
工程参考数据: XC4VSX55-11FFG1148C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC4VSX55-12FF1148C | XC4VSX55-10FFG1148C | XC4VSX55-10FF1148I | XC4VSX55-11FF1148I | XC4VSX55-11FFG1148I |
|---|---|---|---|---|---|---|
| Package | FCBGA-1148 | FCBGA-1148 | FCBGA-1148 | FCBGA-1148 | FCBGA-1148 | FCBGA-1148 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Logic Cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells |
| Configurable Logic Blocks | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs | 6,144 CLBs |
| User I/O | 640 I/O | 640 I/O | 640 I/O | 640 I/O | 640 I/O | 640 I/O |
| Speed Grade | -11 | -12 | -10 | -10 | -11 | -11 |
| Logic Family | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
关键差异点
- Balanced -11 performance and density (对比 XC4VSX55-10FFG1148C)
- Lower performance ceiling than the -12 alternative (对比 XC4VSX55-12FF1148C)
- Matches the listed 0°C to 85°C operating range (对比 XC4VSX55-11FFG1148I)
设计说明
Use the official Virtex-4 package pinout file for every ball assignment rather than relying on a generic 1,148-ball BGA drawing. Confirm power, ground, configuration, clock, and user-I/O positions against the selected MPN. Preserve uninterrupted reference planes under appropriate ball groups, minimize return-path discontinuities, and follow the manufacturer's footprint and assembly guidance for this mature FCBGA package.
Plan the supply network for the device's logic, auxiliary, memory, and I/O requirements as separate physical paths even where regulation networks are shared. Place decoupling capacitance at the associated device balls, keep high-current connections short, and validate simultaneous high-I/O and high-logic activity. The target's 640 I/O can create substantial dynamic demand during transitions, so steady-state rail checks alone are insufficient.
Route clock and high-speed interface paths with continuous reference planes and controlled impedance. Avoid crossing plane boundaries where possible, add matching structures where required by the interface specification, and keep configuration and programming nets away from noise-sensitive paths. Re-run signal-integrity and timing simulations after any layer-stack, via, fanout, or component-placement change.
Do not assume that a shared FCBGA-1148 footprint makes every XC4VSX55 suffix interchangeable. Speed grade, temperature grade, supply limits, timing margins, and lifecycle conditions can differ. Before substituting XC4VSX55-12FF1148C, XC4VSX55-10FFG1148C, or an I-grade device, recompile the design with the exact replacement identifier and repeat schematic, timing, power, and thermal reviews.
合规信息
The FFG package designation identifies a lead-free package option, but formal RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation for the exact legacy orderable part and its supply condition.