AD620BNZ vs AD621BNZ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ AD620BNZ بواسطة Analog Devices و AD621BNZ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | AD620BNZ | AD621BNZ |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | 1 external resistor | — |
| Input Offset Voltage | 15 µV | 125 µV typical |
| Slew Rate | 1.2 V/µs | 1.2 V/µs typical |
| Bandwidth | 1 MHz | 800 kHz typical |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.3 V to ±18 V |
| العلبة | 8-pin PDIP | 8-pin PDIP |
| نوع التركيب | Through-hole | Through-hole |
| Power Class | Low-power instrumentation amplifier | — |
| Input Offset Voltage Accuracy | [DATA_NEEDED: input offset voltage accuracy] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode range] |
| نطاق جهد الخرج | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage range] |
| تيار التغذية | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | unknown |
| Product Type | — | Instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 120 dB to 130 dB, condition dependent |
| Gain | — | 10 or 100, pin-strappable |
| نوع الخرج | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |