AD620BNZ vs AD621BNZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma AD620BNZ tarafından Analog Devices ve AD621BNZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | AD620BNZ | AD621BNZ |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | 1 external resistor | — |
| Input Offset Voltage | 15 µV | 125 µV typical |
| Slew Rate | 1.2 V/µs | 1.2 V/µs typical |
| Bandwidth | 1 MHz | 800 kHz typical |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.3 V to ±18 V |
| Paket | 8-pin PDIP | 8-pin PDIP |
| Montaj Türü | Through-hole | Through-hole |
| Power Class | Low-power instrumentation amplifier | — |
| Input Offset Voltage Accuracy | [DATA_NEEDED: input offset voltage accuracy] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode range] |
| Çıkış Gerilimi Aralığı | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage range] |
| Besleme Akımı | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | unknown |
| Product Type | — | Instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 120 dB to 130 dB, condition dependent |
| Gain | — | 10 or 100, pin-strappable |
| Çıkış Türü | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |