AD620BNZ vs AD621BNZ তুলনা
. বিস্তৃত সাথে-সাথে তুলনা AD620BNZ নির্দিষ্ট Analog Devices ও AD621BNZ নির্দিষ্ট Analog Devices. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
বিশিষ্টতা তুলনা
| পারামিটার | AD620BNZ | AD621BNZ |
|---|---|---|
| ব্র্যান্ড | Analog Devices | Analog Devices |
| ক্যাটাগরি | Amplifier ICs | Amplifier ICs |
| লাইফসাইকেল স্ট্যাটাস | সক্রিয় | সক্রিয় |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | 1 external resistor | — |
| Input Offset Voltage | 15 µV | 125 µV typical |
| Slew Rate | 1.2 V/µs | 1.2 V/µs typical |
| Bandwidth | 1 MHz | 800 kHz typical |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.3 V to ±18 V |
| প্যাকেজ | 8-pin PDIP | 8-pin PDIP |
| মাউন্টিং টাইপ | Through-hole | Through-hole |
| Power Class | Low-power instrumentation amplifier | — |
| Input Offset Voltage Accuracy | [DATA_NEEDED: input offset voltage accuracy] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode range] |
| আউটপুট ভোল্টেজ রেঞ্জ | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage range] |
| সাপ্লাই কারেন্ট | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| অপারেটিং তাপমাত্রার পরিসর | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS স্ট্যাটাস | [DATA_NEEDED: RoHS status] | unknown |
| Product Type | — | Instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 120 dB to 130 dB, condition dependent |
| Gain | — | 10 or 100, pin-strappable |
| আউটপুট টাইপ | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |