AD620BNZ vs AD621BNZ Vergleich
Detaillierter Direktvergleich von AD620BNZ von Analog Devices und AD621BNZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | AD620BNZ | AD621BNZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | 1 external resistor | — |
| Input Offset Voltage | 15 µV | 125 µV typical |
| Slew Rate | 1.2 V/µs | 1.2 V/µs typical |
| Bandwidth | 1 MHz | 800 kHz typical |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.3 V to ±18 V |
| Gehäuse | 8-pin PDIP | 8-pin PDIP |
| Montageart | Through-hole | Through-hole |
| Power Class | Low-power instrumentation amplifier | — |
| Input Offset Voltage Accuracy | [DATA_NEEDED: input offset voltage accuracy] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode range] |
| Ausgangsspannungsbereich | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage range] |
| Versorgungsstrom | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| Product Type | — | Instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 120 dB to 130 dB, condition dependent |
| Gain | — | 10 or 100, pin-strappable |
| Ausgangstyp | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |