AD620BNZ vs AD621BNZ So sánh

So sánh chi tiết song song của AD620BNZ bằng Analog Devices và AD621BNZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
AD620BNZ AD620BNZ - Low-Power Instrumentation Amplifier | Analog Devices

AD620BNZ - Low-Power Instrumentation Amplifier | Analog Devices

AD620BNZ ✓ Hoạt động
Analog Devices
AD621BNZ AD621BNZ Low-Power Instrumentation Amplifier | Analog Devices

AD621BNZ Low-Power Instrumentation Amplifier | Analog Devices

AD621BNZ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số AD620BNZ AD621BNZ
Thương hiệu Analog Devices Analog Devices
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Amplifier Type Instrumentation Amplifier —
Number of Circuits 1 circuit —
Gain Range 1 to 10,000 —
Gain Setting 1 external resistor —
Input Offset Voltage 15 µV 125 µV typical
Slew Rate 1.2 V/µs 1.2 V/µs typical
Bandwidth 1 MHz 800 kHz typical
Supply Voltage Range ±2.3 V to ±18 V ±2.3 V to ±18 V
Hộp 8-pin PDIP 8-pin PDIP
Kiểu lắp đặt Through-hole Through-hole
Power Class Low-power instrumentation amplifier —
Input Offset Voltage Accuracy [DATA_NEEDED: input offset voltage accuracy] —
Input Bias Current [DATA_NEEDED: input bias current] 1 nA listed for AD621BNZ comparison
Input Common-Mode Range [DATA_NEEDED: input common-mode range] [DATA_NEEDED: input common-mode range]
Khoảng điện áp đầu ra [DATA_NEEDED: output voltage range] [DATA_NEEDED: output voltage range]
Điện áp cung cấp [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Trạng thái RoHS [DATA_NEEDED: RoHS status] unknown
Product Type — Instrumentation amplifier
Number of Amplifiers — 1 circuit
Common-Mode Rejection Ratio — 120 dB to 130 dB, condition dependent
Gain — 10 or 100, pin-strappable
Kiểu đầu ra — Single-ended
Operating Voltage — ±2.3 V to ±18 V
Internal Gain Setting — Internal resistor gain
ESD Protection — Yes
REACH Status — unknown
AEC-Q100 Qualification — not_applicable
Reference Input Range — [DATA_NEEDED: reference input range]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá