AD620BNZ vs AD621BNZ Perbandingan
Perbandingan bersamaan detil AD620BNZ dari Analog Devices dan AD621BNZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | AD620BNZ | AD621BNZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | 1 external resistor | — |
| Input Offset Voltage | 15 µV | 125 µV typical |
| Slew Rate | 1.2 V/µs | 1.2 V/µs typical |
| Bandwidth | 1 MHz | 800 kHz typical |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.3 V to ±18 V |
| Paket | 8-pin PDIP | 8-pin PDIP |
| Tipe Mounting | Through-hole | Through-hole |
| Power Class | Low-power instrumentation amplifier | — |
| Input Offset Voltage Accuracy | [DATA_NEEDED: input offset voltage accuracy] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode range] |
| Rentang Tegangan Output | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage range] |
| Arus Pemuat | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | [DATA_NEEDED: RoHS status] | unknown |
| Product Type | — | Instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 120 dB to 130 dB, condition dependent |
| Gain | — | 10 or 100, pin-strappable |
| Tipe Output | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |