MPX53DP vs MPXV10GC7U مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MPX53DP بواسطة NXP Semiconductors و MPXV10GC7U بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
NXP Semiconductors
MPX53DP - 50 kPa Uncompensated Differential Pressure Sensor | NXP
MPX53DP ⚠ آخر فرصة للشراء
مقارنة المواصفات
| المعامل | MPX53DP | MPXV10GC7U |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | NXP Semiconductors |
| الفئة | Pressure Sensors | Pressure Sensors |
| حالة دورة الحياة | آخر فرصة للشراء | نشط |
| نوع المستشعر | Piezoresistive Pressure Sensor, Uncompensated | — |
| Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | — |
| Pressure Type | Differential | Vented Gauge |
| Port Configuration | Dual Vertical Port (Differential) | — |
| جهد التغذية | 3 V DC (typical) | 3 V to 6 V (3 V typical excitation) |
| نوع الخرج | Analog millivolt (ratiometric) | Analog Wheatstone Bridge (uncompensated mV) |
| جهد الخرج | 0 mV to 60 mV at 3 V | — |
| Linearity | 0.4% typical | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/kPa] | 3.5 mV/kPa nominal |
| درجة حرارة التشغيل | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| العلبة | 4-SIP Module (Through-Hole, Dual Port) | 8-DIP (0.550", 13.97 mm) through-hole |
| Port Size | 0.19 inch (4.93 mm) Tube | — |
| نوع التركيب | Through-Hole | Through-Hole |
| Media Compatibility | Non-corrosive dry gases (per datasheet) | Dry non-corrosive gases (reference port vented to ambient) |
| مستوى MSL | [DATA_NEEDED: MSL level] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| تيار التغذية | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |