MPX53DP vs MPXV10GC7U Karşılaştırma
Ayrıntılı yan yana karşılaştırma MPX53DP tarafından NXP Semiconductors ve MPXV10GC7U tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
MPX53DP - 50 kPa Uncompensated Differential Pressure Sensor | NXP
MPX53DP ⚠ Son Satın Alma
Özellik Karşılaştırması
| Parametre | MPX53DP | MPXV10GC7U |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Yaşam Döngüsü Durumu | Son Alış Zamanı | Aktif |
| Duyarlılık Türü | Piezoresistive Pressure Sensor, Uncompensated | — |
| Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | — |
| Pressure Type | Differential | Vented Gauge |
| Port Configuration | Dual Vertical Port (Differential) | — |
| Besleme Gerilimi | 3 V DC (typical) | 3 V to 6 V (3 V typical excitation) |
| Çıkış Türü | Analog millivolt (ratiometric) | Analog Wheatstone Bridge (uncompensated mV) |
| Çıkış Gerilimi | 0 mV to 60 mV at 3 V | — |
| Linearity | 0.4% typical | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/kPa] | 3.5 mV/kPa nominal |
| İşletim Sıcaklığı | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Paket | 4-SIP Module (Through-Hole, Dual Port) | 8-DIP (0.550", 13.97 mm) through-hole |
| Port Size | 0.19 inch (4.93 mm) Tube | — |
| Montaj Türü | Through-Hole | Through-Hole |
| Media Compatibility | Non-corrosive dry gases (per datasheet) | Dry non-corrosive gases (reference port vented to ambient) |
| MSL Seviyesi | [DATA_NEEDED: MSL level] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |