MPX53DP vs MPXV10GC7U Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPX53DP disebabkan oleh NXP Semiconductors dan MPXV10GC7U disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MPX53DP - 50 kPa Uncompensated Differential Pressure Sensor | NXP
MPX53DP ⚠ Bahagian terakhir untuk beli
Pengandingan Spesifikasi
| Parametr | MPX53DP | MPXV10GC7U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Masa Terakhir Dibeli | Aktif |
| Jenis Sensus | Piezoresistive Pressure Sensor, Uncompensated | — |
| Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | — |
| Pressure Type | Differential | Vented Gauge |
| Port Configuration | Dual Vertical Port (Differential) | — |
| Tegangan Pemberi Arus | 3 V DC (typical) | 3 V to 6 V (3 V typical excitation) |
| Jenis Output | Analog millivolt (ratiometric) | Analog Wheatstone Bridge (uncompensated mV) |
| Tegangan Output | 0 mV to 60 mV at 3 V | — |
| Linearity | 0.4% typical | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/kPa] | 3.5 mV/kPa nominal |
| Suhu Operasi | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Kemasan | 4-SIP Module (Through-Hole, Dual Port) | 8-DIP (0.550", 13.97 mm) through-hole |
| Port Size | 0.19 inch (4.93 mm) Tube | — |
| Jenis Pemasangan | Through-Hole | Through-Hole |
| Media Compatibility | Non-corrosive dry gases (per datasheet) | Dry non-corrosive gases (reference port vented to ambient) |
| Aras MSL | [DATA_NEEDED: MSL level] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |