MPX53DP vs MPXV10GC7U तुलना
विस्तृत दोनों ओर की तुलना MPX53DP द्वारा NXP Semiconductors और MPXV10GC7U द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MPX53DP - 50 kPa Uncompensated Differential Pressure Sensor | NXP
MPX53DP ⚠ अंतिम खरीद
विशेषता तुलना
| पैरामीटर | MPX53DP | MPXV10GC7U |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Pressure Sensors | Pressure Sensors |
| लाइफसाइकिल स्थिति | अंतिम बार खरीदें | सक्रिय |
| सेंसर प्रकार | Piezoresistive Pressure Sensor, Uncompensated | — |
| Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | — |
| Pressure Type | Differential | Vented Gauge |
| Port Configuration | Dual Vertical Port (Differential) | — |
| सप्लाई वोल्टेज | 3 V DC (typical) | 3 V to 6 V (3 V typical excitation) |
| आउटपुट प्रकार | Analog millivolt (ratiometric) | Analog Wheatstone Bridge (uncompensated mV) |
| आउटपुट वोल्टेज | 0 mV to 60 mV at 3 V | — |
| Linearity | 0.4% typical | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/kPa] | 3.5 mV/kPa nominal |
| ऑपरेटिंग तापमान | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| पैकेज | 4-SIP Module (Through-Hole, Dual Port) | 8-DIP (0.550", 13.97 mm) through-hole |
| Port Size | 0.19 inch (4.93 mm) Tube | — |
| माउंटिंग प्रकार | Through-Hole | Through-Hole |
| Media Compatibility | Non-corrosive dry gases (per datasheet) | Dry non-corrosive gases (reference port vented to ambient) |
| MSL स्तर | [DATA_NEEDED: MSL level] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| सप्लाई करंट | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |