10AS066H4F34I3SG - 660K LE Arria 10 SX SoC FPGA | Intel
MPN: 10AS066H4F34I3SG ✓ সক্রিয়10AS066H4F34I3SG সারাংশ
A System on Chip (SoC) FPGA is a single silicon device that merges a programmable logic fabric with one or more hard processor cores, high-speed peripherals, and memory controllers. Within the broader taxonomy, this part sits in the chain SoC FPGA -> FPGA -> Programmable Logic Device (PLD) -> Integrated Circuit. The SoC architecture removes the need for a separate processor chip on the PCB, lowering BOM cost, shrinking board area, and reducing inter-chip latency while retaining full FPGA programmability.
The 10AS066H4F34I3SG delivers 660K logic elements, embedded hardened memory controllers, 28 nm transceivers, fractional PLLs, and PCIe Gen2/Gen3-capable hardened IP blocks. Its hard ARM Cortex-A9 dual-core subsystem supports symmetric multiprocessing with NEON SIMD media engine, ECC L1/L2 caches, and an integrated CoreSight debug and trace fabric. The integrated HPS exposes EMAC, USB 2.0 OTG, NAND/NOR flash controllers, and DDR3/4 memory interfaces with hardware ECC for reliability.
In system architecture the 10AS066H4F34I3SG is typically paired with external DDR3/DDR4 SDRAM, eMMC or NAND boot flash, and high-speed serial links to ASICs, FPGAs, or backplane transceivers. The 1152-FCBGA package enables the highest-pin-count configurations of the Arria 10 SX family, supporting up to 492 user I/Os at the I/O bank limit and multiple 10 Gbps transceiver channels routed from the FPGA side. The Arria 10 architecture is widely deployed in mid-range communications, video broadcast, industrial imaging, and defense applications.
Typical applications include 4K video processing pipelines, 10G/40G Ethernet aggregation, baseband DSP for wireless backhaul, industrial machine vision, and SoC-based control plane processors. The combination of hardened ARM cores and high-density FPGA fabric makes the part a strong fit when deterministic hardware acceleration must coexist with a Linux-class application processor.
When designing with this device, provide at least 0.9 V core and 1.8 V/2.5 V/3.3 V auxiliary rails, follow the Intel Arria 10 pin connection guidelines, and use the Quartus Prime design suite for synthesis, place-and-route, and HPS configuration. The 35 x 35 mm FCBGA requires ENIG surface finish, microvia or HDI PCB stack-up, and a high-current multi-rail power distribution network.
This page synthesizes distributor pricing, drop-in same-family variants, and design considerations that go beyond what a single manufacturer datasheet delivers, helping sourcing engineers and PCB designers compare options without manually cross-checking every part number.
এর জন্য ড্রপ-ইন বিকল্প 10AS066H4F34I3SG — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible 10AS066H4F34I3SG (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Mounting Type, Operating Temperature, Logic Elements, Process Technology.
10AS066H4F34I3LG
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →10AS066H4F34E3SG
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →10AS066H4F34E3LG
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →10AS066H4F34I4SGES
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
10AS066H3F34I2SG
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z100-2FFG1156
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
10AS066H4F34I3SG সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Manufacturer | Intel (formerly Altera) |
| Series | Arria 10 SX |
| Logic Elements | 660,000 |
| Process Technology | 20 nm |
| Core Voltage | 0.9 V |
| Processor Cores | Dual ARM Cortex-A9 MPCore with CoreSight |
| Hard Processor System Clock | 1.5 GHz |
| প্যাকেজ | 1152-ball FCBGA (35 mm x 35 mm) |
| User I/Os | 492 |
| অপারেটিং তাপমাত্রা | Industrial (-40 C to +100 C) |
| মাউন্টিং টাইপ | Surface Mount |
| Device Family Tier | H4 (high-performance, mid-density, enhanced DSP and transceiver) |
| Hard Memory Controllers | Yes (DDR3/DDR4 with ECC) |
| Transceivers | 28 nm multi-gigabit transceivers |
| Design Tool | Intel Quartus Prime |
| RoHS | Compliant |
10AS066H4F34I3SG 1152-ball fcbga (35 mm x 35 mm) পিন কনফিগারেশন গাইড
10AS066H4F34I3SG (1152-ball fcbga (35 mm x 35 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি 10AS066H4F34I3SG.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
10AS066H4F34I3SG এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: 4K Video Processing and Broadcast, Wireless Baseband and Backhaul, Industrial Machine Vision, Defense and Avionics Signal Processing, Medical Imaging and Diagnostics, High-Performance Computing Acceleration.
4K Video Processing and Broadcast
The 10AS066H4F34I3SG is well suited to 4K video broadcast pipelines because its 660,000 logic elements and hardened DSP blocks can absorb real-time HEVC/H.264 encode-decode, color space conversion, frame-rate conversion, and deinterlacing workloads. The integrated dual-core ARM Cortex-A9 hard processor system at 1.5 GHz handles transport stream muxing, encryption, and ancillary data processing without burdening the FPGA fabric. The 1152-FCBGA package exposes up to 492 user I/Os and multiple multi-gigabit transceivers, enabling direct interfacing to SDI, HDMI, and 10G Ethernet reference designs. Compared with discrete FPGA + ASSP solutions, the SoC integration reduces board area and inter-chip latency.
সুপারিশকৃত
Wireless Baseband and Backhaul
The 10AS066H4F34I3SG targets wireless baseband and backhaul designs where the FPGA fabric accelerates FFT/iFFT, channel coding, and crest-factor reduction while the dual ARM Cortex-A9 MPCore runs MAC/PHY scheduling and Linux networking stacks. The 20 nm process and 28 nm transceivers deliver the timing margin required for CPRI/OBSAI fronthaul and 10G/40G Ethernet aggregation. Industrial temperature grade enables deployment in outdoor and sealed enclosures used by mobile network operators. The SoC architecture reduces system bill of materials by combining a control-plane processor and high-throughput DSP accelerator into a single 1152-FCBGA package.
সুপারিশকৃত
Industrial Machine Vision
The 10AS066H4F34I3SG is a good fit for industrial machine vision systems that combine high-speed image preprocessing with a Linux-class control plane. The FPGA fabric implements Bayer demosaicing, lens distortion correction, and real-time defect detection at line-scan or area-scan sensor rates, while the hard ARM Cortex-A9 subsystem runs the vision application stack over CoaXPress, Camera Link, or GigE Vision interfaces. The 492 user I/Os allow direct connection to multiple parallel image sensors and motor-control feedback paths. Industrial temperature grade (-40 C to +100 C) and long-life Intel Altera support make this part appropriate for factory-floor deployments.
সুপারিশকৃত
Defense and Avionics Signal Processing
The 10AS066H4F34I3SG's 660K logic elements and hardened DSP blocks support radar, electronic-warfare, and signal-intelligence front-end processing where deterministic latency and high throughput are mandatory. The integrated ARM Cortex-A9 subsystem handles control-plane command parsing, health monitoring, and secure boot, while the FPGA fabric implements matched filters, beamforming, and pulse compression. The Arria 10 SX family supports anti-tamper and design-security features that defense integrators require. Operating from -40 C to +100 C industrial temperature, this part meets typical avionic environmental requirements when paired with a thermally engineered enclosure.
সুপারিশকৃত
Medical Imaging and Diagnostics
The 10AS066H4F34I3SG fits medical imaging applications such as ultrasound beamforming, CT reconstruction back-ends, and digital X-ray pre-processors. Its 660K logic elements and DSP blocks implement parallel beamforming and filter-back-projection pipelines at clinical frame rates, while the hard ARM Cortex-A9 double-precision floating-point capable cores run image reconstruction, DICOM stack, and user interfaces. The SoC FPGA reduces the bill of materials compared to a discrete FPGA + external processor approach, important for medical device miniaturization. Industrial temperature grade and lead-free packaging satisfy regulatory requirements for medical equipment.
সুপারিশকৃত
High-Performance Computing Acceleration
The 10AS066H4F34I3SG serves as a co-processor for high-performance compute appliances where PCIe Gen2/Gen3 connectivity and high-density FPGA acceleration are required. The dual-core ARM Cortex-A9 controls DMA, command queuing, and host communication via PCIe, while the FPGA fabric implements custom compute kernels such as financial Monte Carlo simulations, genomic alignment, or scientific FFTs. The 1152-FCBGA package enables routing of multi-gigabit transceivers for low-latency inter-card links inside accelerator chassis. The industrial operating temperature allows deployment in space-constrained edge-compute cabinets.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা 10AS066H4F34I3SG — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | 10AS066H4F34I3LG | 10AS066H4F34E3SG | 10AS066H4F34E3LG | 10AS066H4F34I4SGES | 10AS066H3F34I2SG | XC7Z100-2FFG1156 |
|---|---|---|---|---|---|---|---|
| Package | 1152-FCBGA (35x35) | 1152-FCBGA (35x35) - same | 1152-FCBGA (35x35) - same | 1152-FCBGA (35x35) - same | 1152-FCBGA (35x35) - same | 1152-FCBGA (35x35) - same | 1156-FCBGA (35x35 class) - close but ball map differs |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | AMD (Xilinx) |
| Logic Elements | 660,000 | 660,000 | 660,000 | 660,000 | 660,000 | 660,000 | 444,000 |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 28 nm |
| Core Voltage | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 1.0 V |
| HPS Clock | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | ~1 GHz |
| Speed / Temperature Grade | I3 (industrial) | I3L (industrial, lower power) | E3 (extended) | E3L (extended, lower power) | I4 (industrial, faster, ES) | I2 (industrial, slower) | Speed grade -2 industrial |
| User I/Os | 492 | 492 | 492 | 492 | 492 | 492 | 362 |
মূল পার্থক্যসমূহ
- Highest-density Arria 10 SX with I3 speed grade in this footprint (বনাম10AS066H3F34I2SG)
- Integrated dual-core ARM Cortex-A9 hard processor system (বনামXC7Z100-2FFG1156)
- RoHS-compliant industrial temperature grade F34 package (বনাম10AS066H4F34I4SGES)
ডিজাইন নোট
The 10AS066H4F34I3SG requires at least five separate supply rails: 0.9 V core (VCC, VCCP), 1.8 V/2.5 V/3.3 V auxiliary (VCCIO), dedicated transceiver supply (VCCR/VCCT), and a 1.8 V/3.3 V HPS supply. Estimated: with all logic and transceivers active, total board-level power can reach 20-25 W; the VCC core rail alone can demand 15 A under full utilization. Use a multi-phase controller with output inductors selected to keep ripple under 2% of the rail, and place decoupling capacitors as close as possible to the package balls.
The 1152-FCBGA package requires an HDI PCB stack-up with microvias to escape the 0.8 mm or 1.0 mm ball pitch. Designers should target at least 8-12 layers, an ENIG surface finish, and matched-length impedance-controlled traces for the multi-gigabit transceivers. The thermal pad (if present) must be soldered to the PCB using a via-array thermal relief pattern to ensure proper heat extraction from the high-density FPGA fabric.
Always configure unused transceiver channels per the Intel Arria 10 SX pin connection guidelines - floating or improperly terminated transceiver pins cause additional current draw and may corrupt adjacent channels. Decoupling caps must follow the reference design exactly; do not substitute non-recommended capacitors because the FPGA's power supply rejection is sensitive to ESR/ESL values.
Do not assume the HPS bootloader works without a properly programmed QSPI flash - the 10AS066H4F34I3SG expects a valid boot ROM image at POR. Engineers new to the Arria 10 SX often forget that the HPS and FPGA configuration bitstreams are stored separately; plan for both a golden image and a user image in flash to support fail-safe firmware updates.
কমপ্লায়েন্স তথ্য
RoHS-compliant per the manufacturer product page. Industrial temperature grade is for -40 C to +100 C junction. AEC-Q100 is not applicable (FPGA, not an automotive discrete).
