Products (46,000+)

STM32F107VCT7 - 72MHz 256KB MCU | STMicroelectronics
STM32F107VCT7

STM32F107VCT7 - 72MHz 256KB MCU | STMicroelectronics

The STMicroelectronics STM32F107VCT7 is a 32-bit ARM Cortex-M3 microcontroller operating at 72 MHz, with 256 KB of Flash memory, 64 KB of SRAM, USB OTG, and Ethernet connectivity in a 100-pin LQFP package measuring 14 x 14 mm. It belongs to STMicroelectronics’ STM32F1 connectivity line and combines a high-performance RISC core with integrated communications peripherals for industrial, networking, and embedded-control designs. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The STM32F107VCT7 provides the architecture hierarchy ARM Cortex-M3 core → 32-bit microcontroller → embedded system controller. Its connectivity-oriented feature set allows it to serve as the central controller for Ethernet-connected equipment, USB peripherals, industrial controllers, and human-machine-interface equipment rather than serving only as a simple sensor processor. The device operates at 72 MHz and includes 256 KB of Flash for firmware, 64 KB of SRAM for working data, USB OTG, and an Ethernet MAC. Its 100-LQFP package provides 100 electrical pins in a compact 14 x 14 mm surface-mount footprint. The STM32F107VCT7 therefore supports connected embedded designs requiring substantially more I/O and program storage than small 8-bit or 32-pin microcontroller families. The STM32F107VC family uses a 32-bit ARM Cortex-M3 RISC core and combines USB OTG with Ethernet connectivity. The C density designation corresponds to 256 KB of Flash, while the T7 order code identifies the specified temperature-grade variant. Designers should use the manufacturer’s pin-description table and reference manual when assigning alternate-function signals because the complete peripheral multiplexing and alternate-function mapping extend beyond the basic package outline. Typical uses include industrial Ethernet gateways, USB-to-Ethernet equipment, network-control modules, embedded data-acquisition systems, and compact industrial controllers. In these applications, the Ethernet MAC and USB OTG interfaces reduce the need for external communication controllers, while 256 KB of Flash provides room for networking stacks, control logic, diagnostics, and application firmware. A key design consideration is power and signal-integrity implementation. Place decoupling capacitors close to the supply pins, route Ethernet differential pairs according to the manufacturer’s layout guidance, and provide a clean low-impedance ground path. Firmware, peripheral configuration, pin multiplexing, and operating conditions should be validated against the manufacturer’s device documentation before production release. This page combines the exact order-code specifications with package guidance, interface-focused application analysis, verified drop-in options, and practical engineering notes. It is designed to help engineers identify whether the STM32F107VCT7’s combination of 72 MHz processing, 256 KB Flash, USB OTG, Ethernet, and 100-pin LQFP packaging fits a connected embedded-control design.

RFQ Contact
STM32F205RBT6 - 120MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32F205RBT6

STM32F205RBT6 - 120MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F205RBT6 is a 32-bit Arm Cortex-M3 microcontroller operating at up to 120 MHz, with 128 KB of Flash memory and a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the STM32F20x high-performance microcontroller family and combines real-time control capability with extensive connectivity-oriented peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one integrated circuit. In the technology hierarchy, the STM32F205RBT6 is an Arm Cortex-M3 MCU, a 32-bit RISC embedded processor, and a member of the broader microcontroller and embedded-processing semiconductor category. Its architecture supports deterministic control while reducing the component count required for industrial, communications, and automation equipment. The principal specifications include a 120 MHz maximum core frequency, 128 KB of Flash program memory, 32-bit processing, and operation from 2.5 V or 3.3 V supply rails as identified for this ordering code. The 64-LQFP package provides a conventional 10 mm by 10 mm surface-mount footprint. These characteristics make the device suitable for designs that require meaningful firmware storage and faster control-loop execution than entry-level Cortex-M microcontrollers. The STM32F20x family is based on the Arm Cortex-M3 core and is positioned for high-performance embedded applications. The manufacturer describes the family as operating at up to 120 MHz. Compared with a basic 8- or 16-bit controller, the 32-bit architecture supports wider data paths, more efficient digital filtering, and more capable communications firmware, although actual performance still depends on clock configuration, memory latency, peripheral configuration, and firmware quality. Typical uses include industrial control, IoT equipment, embedded automation, motor-control systems, metering instruments, communications equipment, and compact low-power board designs. The 120 MHz clock is useful for protocol handling and time-critical control, while 128 KB of Flash can store application code, configuration data, and bootloader logic. Developers must still allocate RAM, stack space, and Flash carefully when planning concurrent tasks and protocol stacks. A practical design consideration is power and signal integrity. The LQFP package requires short, properly terminated clock and high-speed signal routes, adequate decoupling near the supply pins, and careful ground-return planning. Firmware should be tested at the intended clock, voltage, and temperature limits because timing margin and peripheral behavior can differ across operating conditions. This page combines the exact STM32F205RBT6 ordering information with an engineering-oriented overview, application guidance, comparison parameters, and practical replacement considerations. It also distinguishes true same-package alternatives from parts that may be functionally related without being immediate PCB drop-in replacements.

RFQ Contact
STM32F205RCT6 - 120MHz Cortex-M3 MCU 256KB Flash | ST
STM32F205RCT6

STM32F205RCT6 - 120MHz Cortex-M3 MCU 256KB Flash | ST

The STMicroelectronics STM32F205RCT6 is a 32-bit ARM Cortex-M3 microcontroller operating at up to 120 MHz with 256 KB of Flash memory and 64 KB of SRAM, housed in a 64-pin LQFP (10 x 10 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters into one chip. Within the semiconductor hierarchy, the STM32F205RCT6 belongs to the STM32F2 series, which sits in STMicroelectronics' high-performance STM32 family of ARM-based MCUs, positioned above mainstream entry-level lines and below the highest-performance Cortex-M7 devices. Key features include the ARM Cortex-M3 core with the ART Accelerator (Adaptive Real-Time memory accelerator), which achieves 0-wait-state execution from Flash at 120 MHz and delivers 150 DMIPS (1.25 DMIPS/MHz per Dhrystone 2.1). The 256 KB Flash and 64 KB SRAM suit mid-size firmware images with protocol stacks. The device operates from a 1.8 V to 3.6 V supply (2.5 V/3.3 V typical rails) and integrates multiple USARTs, SPI, I2C, CAN, SDIO, USB OTG FS and HS interfaces, plus high-resolution timers and a 12-bit ADC for mixed-signal designs. Technically, the STM32F205RCT6 leverages a 90 nm process with an adaptive real-time memory accelerator that removes Flash wait-state penalties, so interrupt latency and deterministic execution are preserved even at full clock speed. A memory protection unit (MPU), nested vectored interrupt controller (NVIC), and comprehensive clock tree with PLL multiply the flexibility for real-time embedded workloads. Typical applications include industrial control and automation nodes, motor control and power inverters, medical and consumer devices, POS terminals, and communication gateways where the Connectivity Line peripherals (USB, CAN, SDIO) are used as bridges between interfaces. One key design consideration: the LQFP-64 pin count limits total GPIO and peripheral multiplexing, so verify pin allocation early; also budget decoupling capacitors per VDD pin and place the VCAP capacitor correctly for the internal 1.2 V regulator. This page synthesizes distributor pricing, same-family drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-06.

RFQ Contact
STM32F205RET6 - ARM Cortex-M3 MCU 120MHz 512KB | STMicroelectronics
STM32F205RET6

STM32F205RET6 - ARM Cortex-M3 MCU 120MHz 512KB | STMicroelectronics

The STMicroelectronics STM32F205RET6 is an ARM 32-bit Cortex-M3 microcontroller (MCU) in the STM32F2 connectivity line, integrating 512 KB of Flash and approximately 128+4 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It runs at up to 120 MHz with 150 DMIPS / 1.25 DMIPS per MHz Dhrystone performance and pairs the core with ST's Adaptive Real-Time (ART) Accelerator that enables 0-wait-state execution from Flash. The device exposes up to 51 GPIOs, three 12-bit ADCs, two 12-bit DACs, 17 timers, USB OTG full- and high-speed, 10/100 Ethernet MAC, CAN 2.0B, plus multiple USART/UART/SPI/I2C controllers for high-mix industrial and consumer connectivity applications. An ARM Cortex-M3 microcontroller is a 32-bit RISC core (Cortex-M3 -> ARM Cortex-M family -> ARM 32-bit MCU -> embedded microcontroller -> semiconductor) optimized for deterministic real-time interrupt response and low power, complementing Cortex-M0/M0+ (cost) and Cortex-M4/M7 (DSP/FP) in the broader Cortex-M product tree. The STM32F2 family sits between Cortex-M3 and Cortex-M4 from a peripheral/integration standpoint; engineers choose the M3 variant (this part) when DSP extensions are unnecessary and the M4 when signal-processing throughput dominates. Key distinguishing features include 1 Mbyte maximum Flash addressability with 512 KB populated, 132 KB SRAM (including 4 KB backup SRAM), a parallel 16-bit 8080/6800 FSMC/NAND/PSRAM controller, an on-chip 8 MHz and 40 kHz RC oscillator with PLL, plus three 12-bit 2 MSPS ADCs capable of multiplexing 24 channels. Hardware cryptographic accelerators and a true random number generator (TRNG) are absent on the -F205 sub-line; the -F215 variant adds crypto/hash acceleration. Power domains include a 1.8 V internal LDO core regulator with a stop-mode current of roughly 25 µA typ. Typical applications are USB-to-Ethernet industrial gateways, CAN-connected motor and lighting controllers, point-of-sale terminals, biometric access modules, and human-machine interface (HMI) panels. The 10x10 mm LQFP-64 with 0.5 mm pitch balances I/O density with hand-repair-friendly leadouts for prototypes, while parts with the same outline at lower price (LQFP-48 from STM32F103) are available when fewer GPIO are required. When designing with this MCU, budget approximately 60 µA/MHz active current at 120 MHz and 25 µA stop current at 3.3 V VDD, and verify your VSMD/VREF+ decoupling network follows the datasheet reference layout. Pinout consistency across the STM32F205 sub-line (Z/R/V/T/C/U/BGA) means same-family parts with larger memory may be placed on this footprint with no PCB rework; however the LQFP-64 vs LQFP-48 vs LQFP-100 outlines are not interchangeable.

RFQ Contact
STM32F205RGT6 - 120MHz ARM Cortex-M3 MCU, 1MB Flash | STMicroelectronics
STM32F205RGT6

STM32F205RGT6 - 120MHz ARM Cortex-M3 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F205RGT6 is a high-performance ARM Cortex-M3 based microcontroller operating at up to 120 MHz, with 1 MB of flash memory and 128 KB of SRAM. It is housed in a 64-pin LQFP package (LQFP64) and is part of the STM32F2 series, which is designed for applications requiring high processing power, rich connectivity, and advanced analog features. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash for program storage and SRAM for data), and programmable input/output peripherals. In the system hierarchy, a microcontroller is a type of embedded processor, which falls under the broader category of integrated circuits. The STM32F205RGT6 is a mid-range MCU in the STM32 portfolio, positioned between the value-line STM32F1 series and the high-performance STM32F4/F7 series, offering a balance of performance, power efficiency, and peripheral integration. Key features of the STM32F205RGT6 include a 32-bit ARM Cortex-M3 core with a maximum clock speed of 120 MHz, 1 MB of flash memory, and 128 KB of SRAM. It supports a wide range of communication interfaces: 3x I2C, 4x USART, 2x UART, 3x SPI, 2x CAN, 1x USB 2.0 OTG FS/HS, 1x SDIO, and 1x Ethernet MAC. The device also integrates a 12-bit ADC with 16 channels, a 12-bit DAC with 2 channels, advanced timers, and a true random number generator (RNG). The operating voltage range is 1.8V to 3.6V, and the temperature range is -40°C to +85°C (industrial grade). The STM32F205RGT6 is built on a 90nm process technology, enabling high performance with low power consumption. It features a nested vectored interrupt controller (NVIC), a memory protection unit (MPU), and a flexible memory controller (FMC) for external memory expansion. The device supports a comprehensive set of low-power modes, including Sleep, Stop, and Standby, making it suitable for battery-powered applications. Typical applications include industrial control systems, motor drives, medical devices, consumer electronics, IoT gateways, and communication modules. Its rich connectivity and high processing power make it ideal for applications requiring real-time control and data processing. When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1uF capacitor. For high-speed USB and Ethernet, follow the layout guidelines in the STM32F2xx reference manual (RM0033) to ensure signal integrity.

RFQ Contact
STM32F205RGT7 - 120MHz Cortex-M3 MCU | STMicroelectronics
STM32F205RGT7

STM32F205RGT7 - 120MHz Cortex-M3 MCU | STMicroelectronics

STMicroelectronics STM32F205RGT7 is a high-performance 32-bit Arm Cortex-M3 microcontroller with a maximum operating frequency of 120 MHz, 1 MB of Flash memory, and a 64-LQFP 10 x 10 mm package. It combines 150 DMIPS processing performance with an ART Accelerator, a memory protection unit, and a broad set of communications peripherals for demanding embedded-control designs. A microcontroller is a programmable semiconductor system that integrates a CPU, memory, peripherals, and communication interfaces onto one device. The STM32F205RGT7 belongs to the STM32F2 high-performance MCU family, with Arm Cortex-M3 forming the architectural link between a general-purpose processor and a compact embedded-control platform. It executes firmware from embedded Flash while supporting real-time monitoring, data acquisition, communications, and actuator-control functions. Principal features include a 120 MHz maximum clock, 1 MB of Flash, 150 DMIPS performance, an ART Accelerator for zero-wait-state Flash execution, and an MPU. The 64-LQFP package exposes a conventional 0.5 mm-pitch footprint that is practical for inspection and prototype assembly. Its combination of computational performance and external connectivity is useful when a design needs more capability than a low-end Cortex-M device without moving to a larger package. The Cortex-M3 processor uses a reduced-instruction architecture optimized for embedded control, while the ART Accelerator improves instruction execution from Flash. The MPU supports isolation of memory regions for protective partitioning. Peripheral integration also reduces the need for external interface devices, allowing the MCU to consolidate communications, timing, analog conversion, and control functions within a single controller. Typical applications include industrial Ethernet equipment, connected industrial controls, communications gateways, audio and media processing modules, and high-speed data-acquisition systems. Designers can use the MCU for protocol handling, motor and actuator control, sensor aggregation, firmware-intensive user interfaces, and connected embedded products. An Ethernet controller and suitable PHY or communications transceiver can extend the device into networked equipment. PCB implementation should preserve the STM32F205xx reference power, ground, decoupling, and signal-routing practices. Place decoupling capacitors close to the supply pins, route high-frequency signals with short return paths, and follow the manufacturer package drawing for exposed thermal and electrical land patterns. Confirm oscillator, debug, boot, reset, and peripheral pins against the manufacturer pin description before releasing the PCB. This product page combines the STM32F205RGT7 specification summary, package-aware alternatives, parameter comparisons, application guidance, and practical design notes. It is intended to help engineers evaluate whether the 120 MHz Cortex-M3 core, 1 MB Flash configuration, and 64-LQFP footprint fit an embedded design before completing schematic and PCB validation.

RFQ Contact
STM32F205VCT6TR - 120MHz Cortex-M3 MCU 256KB LQFP-100 | STMicroelectronics
STM32F205VCT6TR

STM32F205VCT6TR - 120MHz Cortex-M3 MCU 256KB LQFP-100 | STMicroelectronics

The STMicroelectronics STM32F205VCT6TR is a high-performance ARM Cortex-M3 32-bit microcontroller in the STM32F2 family, offered in a 100-pin LQFP package (tape-and-reel packaging variant) with 256 KB of Flash and 96 KB of SRAM. The Cortex-M3 core runs up to 120 MHz delivering 150 DMIPS, paired with a flexible ART Accelerator that provides 0-wait-state execution from Flash at the maximum CPU speed, equivalent to the throughput of a MIPS-class core running at 225 MHz on a 0-wait-state memory. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core built around the Thumb-2 instruction set and tightly integrated with NVIC (Nested Vectored Interrupt Controller), SysTick, and optionally MPU and ETM blocks. In the broader taxonomy, the Cortex-M3 sits under Cortex-M -> ARM -> 32-bit MCU -> microcontroller, and the STM32F2 specifically targets high-performance connectivity applications. The Cortex-M3 brings deterministic interrupt latency, hardware divide, single-cycle multiply, and atomic bit-band regions, all of which translate into predictable code execution and tight real-time behavior. Key features include 256 KB of Flash program memory, 96 KB of SRAM, three 12-bit ADCs with up to 24 channels, two 12-bit DACs, up to 17 timers (including motor-control PWM and general-purpose 16/32-bit timers), three I2C, four USART, two UART, three SPI, plus USB OTG Full-Speed and High-Speed with on-chip PHY, CAN 2.0B, SDIO, and 10/100 Ethernet MAC with dedicated DMA. The part operates from a 1.8 V to 3.6 V supply and provides multiple low-power modes (Sleep, Stop, Standby) with battery-domain RTC. Architecturally, the STM32F205 integrates the ART Accelerator, a 7-channel general-purpose DMA, a CRC engine, and a 96-bit unique device ID. The combination of hardware encryption support (AES, RNG, USB OTG, and external FSMC/SDIO access) makes it well suited for industrial gateways, smart-meter and building-automation controllers that require Ethernet and USB at the same time. Typical applications for the STM32F205VCT6TR include industrial motor drives and variable-frequency drives (VFD), barcode scanners and printers, home appliances with TFT/LCD HMIs, USB-connected medical instrumentation, alarm panels with Ethernet backhaul, and protocol converters bridging CAN, USB and Ethernet. The LQFP-100 footprint also makes it a strong fit for hand-soldered prototypes and medium-volume industrial designs. When designing with this part, fit decoupling per VDD/VBAT/VDDA pin, place a 32.768 kHz crystal on PC14/PC15 if RTC accuracy is needed, and route the HSE oscillator traces short. Always verify USB OTG HS PHY biasing (external resistor on DP pull) when the high-speed USB port is used. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not typically compiled inside the manufacturer datasheet PDF.

RFQ Contact
STM32F205VET6 - 120MHz ARM Cortex-M3 MCU, 512KB Flash | STMicroelectronics
STM32F205VET6

STM32F205VET6 - 120MHz ARM Cortex-M3 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F205VET6 is a high-performance ARM Cortex-M3 32-bit microcontroller operating at up to 120 MHz with 150 DMIPS performance, integrating 512KB of Flash memory and 132KB of SRAM in a 100-pin LQFP (14x14 mm) package. The device provides 82 user I/O pins and is qualified over the industrial -40C to +85C temperature range, making it suitable for demanding embedded designs. According to the STMicroelectronics STM32F205xx datasheet, this part is part of the STM32F2 family and supports supply voltages of 1.8V to 3.6V. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, volatile and non-volatile memory, and programmable peripherals to govern a specific operation within an embedded system. MCUs sit in the hierarchy of embedded processors between simple 8-bit controllers and high-end application processors, and are optimized for deterministic real-time control and signal processing. The STM32F205VET6 specifically belongs to the ARM Cortex-M3 lineage (32-bit RISC core), positioning it above 8/16-bit microcontrollers in compute density while remaining below Cortex-A application processors in both cost and power. Key features include 120 MHz maximum CPU frequency, 512KB on-chip Flash (512K x 8 organization), 132KB SRAM, 17 general-purpose and advanced-control timers, 3x 12-bit ADCs, USB OTG High-Speed and Full-Speed, on-chip 10/100 Ethernet MAC, 2x CAN, 3x SPI, 3x I2C, 5x USART/UART plus UART, and a digital camera interface. The adaptive real-time (ART) memory accelerator reduces Flash wait states to deliver close-to-zero penalty execution from on-chip code, and the part supports cryptographic features such as the unique 96-bit device ID and RNG in this density. Technically, the STM32F205VET6 is fabricated on a low-power CMOS process and offers multiple low-power modes (Sleep, Stop, Standby) with fast wakeup times for battery-driven applications. The 100-pin LQFP package exposes 82 GPIOs tolerating 5V on most pins, includes an integrated voltage regulator for single-supply operation, and supports JTAG and SWD interfaces for in-circuit debug. Independent and window watchdog timers, a SysTick timer, and a real-time clock (RTC) with calendar and backup registers round out the on-chip resources. Typical applications include industrial automation and motor control, building and home automation gateways, consumer HMI with TFT or camera input, USB peripherals, Ethernet-connected IoT nodes, medical instrumentation, and point-of-sale terminals. Its combination of high CPU throughput, on-chip Ethernet and USB OTG HS makes it especially attractive when designers need wired connectivity without an external PHY companion MCU. When designing with this MCU, place decoupling capacitors (typically 100 nF + 4.7 uF) on each VDDA/VSS pair as close to the pins as the PCB layout allows, and route VBAT7 (VBAT) directly to a coin cell or supercap if RTC backup retention is required. Carefully observe BOOT0 pin configuration to select the correct boot source (main Flash, system memory bootloader, or embedded SRAM) and verify HSE/HSI clock tree values against the RM0033 reference manual before locking the firmware. This page synthesizes distributor pricing snapshots, drop-in alternatives, and design guidance that are not collected in any single place in the manufacturer datasheet, providing a faster procurement and design start than reading the full RM0033 reference manual from scratch.

USD $7.25 Contact
STM32F205VET7 - ARM Cortex-M3 MCU, 512KB Flash, 120MHz | STMicroelectronics
STM32F205VET7

STM32F205VET7 - ARM Cortex-M3 MCU, 512KB Flash, 120MHz | STMicroelectronics

The STMicroelectronics STM32F205VET7 is a high-performance ARM Cortex-M3 32-bit microcontroller with 512KB of Flash memory, 120MHz CPU clock, and 100KB of SRAM, housed in a 100-pin LQFP (14x14) package. It integrates the ART Accelerator allowing 0-wait-state execution from Flash memory, achieving 150 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1). The device operates from a 1.8V to 3.6V supply and includes an MPU for memory protection. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The STM32 family sits within the ARM Cortex-M ecosystem — specifically Cortex-M3, which is a Harvard-architecture core optimized for deterministic real-time performance with low interrupt latency. Within STMicroelectronics' portfolio, the STM32F2 series targets high-performance embedded applications requiring rich connectivity (USB OTG, CAN, Ethernet MAC) combined with substantial on-chip memory, sitting between the mainstream F1 and the more advanced F4 lines. Key features include up to 1 Mbyte addressable Flash (512KB on this variant), 100KB SRAM with CCM (Core-Coupled Memory), three 12-bit ADCs (1 MSPS / 24 channels), two 12-bit DACs, and 17 timers. Communication peripherals include USB OTG full-speed/high-speed, two CAN 2.0B interfaces, an Ethernet MAC (with MII/RMII), three I2C, three SPI, four USART and two UART interfaces. The 100-pin LQFP package provides 82 user I/O pins with 5V-tolerant I/Os. The ART Accelerator paired with the 120MHz Cortex-M3 delivers efficient deterministic execution, allowing code to run from Flash at full speed without wait states — critical for DSP-style routines, motor-control loops, and protocol stacks. The integrated Ethernet MAC and dual CAN buses enable industrial networking and fieldbus applications, while the high-speed USB OTG supports device, host, and OTG modes for embedded peripherals. Typical applications include industrial control and PLC modules, motor drives and inverter control, USB peripherals and HID devices, CAN-based automotive body and chassis ECUs, Ethernet-connected IoT gateways, and human-machine interface (HMI) panels. The combination of memory density and peripheral mix suits it to multi-protocol industrial nodes. When designing with this device, ensure the regulator providing VDD/VDDA supplies clean 3.3V with adequate decoupling (typically 100nF per VDD pin plus 4.7uF bulk). The boot configuration pins (BOOT0/BOOT1) must be set correctly for the chosen boot source — main Flash, system memory (bootloader), or embedded SRAM. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Engineers can use the FAQ and design_notes sections below to accelerate schematic review and BOM validation.

RFQ Contact
STM32F205VFT6 - 120MHz Cortex-M3 MCU | STMicroelectronics
STM32F205VFT6

STM32F205VFT6 - 120MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F205VFT6 is a 32-bit Arm Cortex-M3 microcontroller operating at up to 120 MHz, with 768 KB of Flash memory organized as 768K x 8 and housed in a 100-pin LQFP package measuring 14 x 14 mm. A microcontroller, or MCU, is a compact computing device that integrates a processor core, programmable memory, peripherals, and communication interfaces on one semiconductor package. The STM32F20x family belongs to the hierarchy of embedded processor, microcontroller, embedded semiconductor, and general-purpose semiconductor. It is designed for systems that require deterministic real-time control, peripheral connectivity, and a broad software development ecosystem centered on the Arm Cortex-M architecture. The STM32F205VFT6's principal characteristics include its 120 MHz maximum Cortex-M3 operating frequency, 32-bit processing architecture, and 768 KB Flash capacity. The 2.5 V and 3.3 V supply information published for this exact order code identifies it for conventional embedded and industrial equipment. Its 100-LQFP package provides 100 external leads, allowing access to the peripheral and signal resources associated with the STM32F20x family while supporting surface-mount assembly. The Arm Cortex-M3 core uses a 32-bit RISC instruction set and belongs to the STM32F2 performance-oriented product family. Operating at up to 120 MHz, the MCU provides substantial computational headroom for control loops, communications protocols, data acquisition, and supervisory logic. The Flash-memory density provides room for a bootloader, application code, configuration data, and field-update functions within a single device. Exact RAM capacity, peripheral inventory, voltage limits, and electrical timing values must be confirmed from the manufacturer documentation for the selected package variant. Typical uses include industrial automation controllers, communications equipment, data-acquisition systems, embedded gateways, and compact control platforms. The combination of a high-performance Cortex-M3 core and 768 KB Flash is particularly useful when an application combines real-time peripheral control with multiple communication tasks. A network-connected product can use the MCU for protocol processing as well as local sensor acquisition and actuator supervision. PCB design should treat the 100-LQFP footprint as fine-pitch and route decoupling, clock, reset, and communication signals with careful attention to return paths. Validate power sequencing, boot configuration, oscillator startup, and peripheral pin multiplexing in hardware because software compatibility alone does not guarantee that a board revision can use another member of the STM32F20x family without review. This product page combines the exact order-code specifications, manufacturer family information, package identification, sourcing details, and replacement analysis. It also distinguishes a documented same-package upgrade from broader MCU alternatives so engineers can assess PCB compatibility, memory requirements, firmware implications, and production continuity before approving a substitution.

RFQ Contact
STM32F205VGT6 - 120MHz ARM Cortex-M3 MCU 1MB Flash | STMicroelectronics
STM32F205VGT6

STM32F205VGT6 - 120MHz ARM Cortex-M3 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F205VGT6 is a high-performance ARM Cortex-M3 32-bit RISC microcontroller operating at up to 120 MHz, delivering 150 DMIPs, with 1 MB of embedded Flash and 132 KB of SRAM in a 100-pin LQFP (14x14 mm) package. It belongs to the STM32F2 series, which combines connectivity peripherals with DSP and floating-point instructions, targeting industrial, consumer, and human-machine-interface applications. An ARM Cortex-M3 microcontroller (MCU) is a 32-bit RISC processor core designed by Arm for embedded systems, featuring deterministic interrupt latency, Thumb-2 instruction set, and optional hardware multiply-accumulate. Within the broader taxonomy, the Cortex-M3 sits under Arm Cortex-M → 32-bit MCU → embedded microcontroller → semiconductor IC. The STM32F2 family specifically targets applications that require high computational throughput plus rich connectivity (USB OTG, Ethernet, CAN, SDIO) without the higher cost of Cortex-M4 parts. Key features include 82 GPIO pins, three 12-bit ADCs (up to 2.4 MSPS), two 12-bit DACs, 17 timers, USB OTG Full-Speed and High-Speed, 10/100 Ethernet MAC, two CAN 2.0B controllers, an SDIO interface, and a camera interface. The integrated 4 KB backup SRAM retains data in standby mode while consuming only a few microamperes, and the part supports four low-power modes (Sleep, Stop, Standby, and VBAT) for battery-powered designs. The architecture uses a multi-AHB bus matrix with separate buses for SRAM, Flash, and peripherals, allowing parallel DMA transfers and Cortex-M3 core execution without contention. The 120 MHz clock is sourced from an internal 16 MHz RC oscillator (with PLL) or an external 4-26 MHz crystal, enabling flexible system clock trees. Cryptographic and FSMC functions are NOT included on the F205 sub-line (those land on the F207 sub-line), which keeps this part cost-optimized for non-crypto applications. Typical applications include industrial control (PLCs, motor drives, factory automation), medical equipment (patient monitors, diagnostic peripherals), consumer electronics (home appliances, audio devices with USB), networking (Ethernet-enabled IoT gateways, smart sensors), and human-machine interfaces (touchscreen controllers, graphical displays). The 1 MB Flash and 132 KB SRAM also suit firmware-over-the-air (FOTA) updates with rollback image storage. When designing with the STM32F205VGT6, ensure your PCB layout places the 100-pin LQFP's exposed pad (if present on the variant) onto a ground copper pour for thermal dissipation, and follow ST's application note AN2867 for oscillator PCB layout. Decouple VDD/VDDA/VBAT with 100 nF ceramic capacitors placed within 2 mm of each supply pin, and add a 4.7 uF bulk capacitor per supply rail. VDD operating range is 1.8-3.6 V (the V suffix), so verify your LDO selection covers this range with adequate transient response. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate second-source options and PCB migration paths for the STM32F205VGT6.

RFQ Contact
STM32F205VGT7 - 120MHz Cortex-M3 MCU | STMicroelectronics
STM32F205VGT7

STM32F205VGT7 - 120MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F205VGT7 is a 32-bit Arm Cortex-M3 microcontroller operating at up to 120 MHz, with 1 MB of Flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It belongs to the STM32F2 high-performance microcontroller family and provides 150 DMIPS while supporting 1.25 DMIPS/MHz. The device also includes the ART Accelerator for zero-wait-state Flash execution and an MPU for protected memory access. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and interface controllers on one device. The STM32F2 architecture sits within the broader hierarchy of Arm Cortex-M microcontroller -> 32-bit RISC processor -> embedded processing semiconductor. Its combination of real-time processing capability, extensive connectivity interfaces, and deterministic peripheral access makes it suitable for industrial controls, communications equipment, audio systems, and connected embedded products. The STM32F205VGT7 offers 1 MB of Flash organized as 1M x 8 and operates with an Arm Cortex-M3 CPU at up to 120 MHz. Its ART Accelerator allows zero-wait-state execution from Flash, while the MPU supports isolated memory regions for operating-system and firmware protection. The 100-LQFP package provides 100 external pins for power, ground, clock, reset, programming, and peripheral connectivity. The exact operating voltage, SRAM capacity, peripheral list, and electrical limits should be confirmed in the manufacturer datasheet before design release. The STM32F20x family architecture combines high-performance Flash execution with extensive serial connectivity. The dedicated MPU and high CPU throughput support more responsive control loops than general-purpose microcontrollers while retaining the software ecosystem associated with Arm Cortex-M3 devices. The manufacturer's family documentation identifies full compatibility throughout the STM32 family as an architectural design goal, which simplifies peripheral-driver reuse across related devices when their electrical and feature conditions are matched. Typical uses include industrial automation controllers, networked embedded gateways, USB-connected control equipment, audio processing modules, and motor-control or sensor-hub products. For a new design, engineers should assess the available communication peripherals, memory requirements, package routing density, clock-tree configuration, and development-tool support before fixing the MCU in the PCB layout. The STM32F205VGT7 is also a practical candidate for legacy-platform maintenance because its 1 MB Flash capacity and 100-pin LQFP footprint provide a defined upgrade path without moving to a smaller package. PCB implementation requires careful decoupling around every supply pin, short and symmetrical clock routes, a controlled reset network, and programming access that remains usable after assembly. Because the LQFP-100 footprint has fine-pitch leads, inspect solder bridges, pad alignment, and thermal copper on assembled prototypes. Firmware production programming should include proper option-byte configuration, boot-mode verification, and boundary scanning where required by the manufacturing process. This product record combines the manufacturer's family and device information with distributor catalog details, exact-package alternatives, parameter comparisons, and practical design guidance. It supports faster engineering decisions by separating verified headline specifications from parameters that still require confirmation in the manufacturer datasheet.

RFQ Contact
STM32F205ZET6 - 32-bit ARM Cortex-M3 MCU, 512KB Flash | STMicroelectronics
STM32F205ZET6

STM32F205ZET6 - 32-bit ARM Cortex-M3 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F205ZET6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M3 core, operating at up to 120 MHz. It features 512 KB of Flash memory and 128 KB of SRAM, making it suitable for a wide range of embedded applications. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body and 0.5 mm pitch, providing ample GPIOs and connectivity options. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, enabling control, monitoring, and communication in applications ranging from consumer electronics to industrial automation. The STM32F205ZET6 belongs to the STM32F2 series, which is part of the broader STM32 family of 32-bit Flash microcontrollers based on the ARM Cortex-M processor. This family hierarchy positions the STM32F205ZET6 as a high-performance MCU with advanced connectivity and rich analog peripherals. Key features of the STM32F205ZET6 include a 32-bit ARM Cortex-M3 CPU with adaptive real-time accelerator (ART) allowing 0-wait state execution from Flash, a memory protection unit (MPU), and a comprehensive set of peripherals. It offers up to 114 I/O ports, 3x 12-bit ADCs, 2x DACs, 12-bit timers, and advanced communication interfaces including USB 2.0 OTG HS/FS, Ethernet MAC, CAN, SPI, I2C, USART, and SDIO. The device operates from a 1.8V to 3.6V power supply and supports a temperature range of -40°C to +85°C (industrial grade). Technically, the STM32F205ZET6 is built on a 90nm process technology, enabling high clock speeds with low power consumption. It includes a nested vectored interrupt controller (NVIC) for efficient interrupt handling, a DMA controller with 16 channels, and a true random number generator (RNG). The device also features a real-time clock (RTC) with calendar and alarm functions, and a flexible static memory controller (FSMC) for external memory expansion. Typical applications include industrial control systems, motor drives, medical devices, consumer electronics, and IoT gateways. Its rich connectivity and high processing power make it ideal for applications requiring real-time control and communication, such as PLCs, robotics, and smart home hubs. When designing with the STM32F205ZET6, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin should be connected to a clean analog supply to minimize noise in ADC conversions. Also, configure the boot pins correctly to select the desired boot mode (Flash, SRAM, or system memory) for programming and debugging.

RFQ Contact
STM32F205ZET7 - 120MHz Cortex-M3 512KB MCU | STMicroelectronics
STM32F205ZET7

STM32F205ZET7 - 120MHz Cortex-M3 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F205ZET7 is a 32-bit ARM Cortex-M3 microcontroller operating up to 120 MHz, with 512 KB of Flash memory and 114 I/O in a 144-pin LQFP package measuring 20 mm by 20 mm. It belongs to the STM32F2 series of high-performance embedded microcontrollers and combines real-time control, communications, and external peripheral support in one device. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor core designed for embedded control. STM32F2 devices add Flash and SRAM memory, clock and reset management, GPIO, communication peripherals, and hardware acceleration into a compact system-on-chip. The STM32F205ZET7 provides 150 DMIPS and an ART Accelerator that supports 0-wait-state execution from Flash, making it suitable for control systems requiring fast deterministic response without external memory. The STM32F205ZET7 provides 120 MHz maximum clock operation, 512 KB of Flash, 114 I/O, and 150 DMIPS processing performance according to the manufacturer datasheet information. Its 144-LQFP package exposes a large pin count for mixed-signal and connectivity-intensive designs. The family also includes an MPU and a complete set of general-purpose timers, making the device appropriate for motor, industrial, communications, and embedded-control equipment. The STM32F20x architecture combines the Cortex-M3 core with the ART Accelerator, memory protection, and extensive peripheral integration. Peripheral features include 12-bit ADCs, DACs, communication interfaces, and timers; exact channel counts, voltage limits, and peripheral configurations should be confirmed in the manufacturer datasheet before final schematic and firmware design. The 120 MHz operating ceiling also makes clock-tree configuration, Flash wait-state handling, and brownout behavior important parts of a robust design. Typical applications include industrial automation controllers, communications equipment, audio and signal-processing systems, motor-control platforms, and data-acquisition units. The combination of 512 KB Flash, 114 I/O, and 120 MHz performance is particularly useful when several external sensors, actuators, communication transceivers, and human-machine interfaces must share one controller. Its large LQFP package also eases inspection and rework compared with denser leadless packages. PCB implementation should preserve the pin assignment and decoupling requirements defined in the manufacturer datasheet. Place bypass capacitors close to the supply pins, route high-speed and sensitive signals away from switching nodes, and provide solid ground-plane continuity. Confirm the exact oscillator, debug, reset, and communication connections before releasing a layout because alternate package functions and peripheral multiplexing can change pin availability. This product page combines the verified device identity, electrical characteristics, package information, compatible STM32F2 family replacements, and practical selection guidance. It is intended to accelerate engineering review while keeping final component decisions anchored to the official STM32F205ZE documentation and device ordering information.

RFQ Contact
STM32F205ZFT6 - 120MHz Cortex-M3 MCU | STMicroelectronics
STM32F205ZFT6

STM32F205ZFT6 - 120MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F205ZFT6 is a 32-bit Arm Cortex-M3 microcontroller operating up to 120 MHz, with 768 KB of Flash memory, 132 KB of SRAM, and 114 I/O pins in a 144-lead LQFP package. It combines 150 DMIPS processing performance with extensive connectivity and peripheral support for demanding embedded-control designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, input/output ports, and peripherals on one device. The STM32F205 belongs to the STM32F2 family of 32-bit embedded MCUs, which sit within the broader hierarchy of Arm Cortex-M3 MCU, embedded processor, microcontroller, and semiconductor. This integration reduces component count and simplifies control of industrial, communications, consumer, and instrumentation equipment. Core features include an Arm Cortex-M3 processor with an ART Accelerator for zero-wait-state Flash execution, a maximum operating frequency of 120 MHz, and an operating-performance rating of 150 DMIPS. The device provides 768 KB of program Flash, 132 KB of SRAM, and 114 general-purpose I/O. Its 2.5 V and 3.3 V operating classes support embedded systems designed around common industrial and consumer logic levels. The STM32F205 architecture combines a high-performance 32-bit core with extensive serial and parallel interfaces. Typical integration includes USART, SPI, I2C, USB, Ethernet MAC, CAN, timers, DMA controllers, ADCs, and GPIO resources, depending on the exact device configuration. The 144-LQFP package provides a large pin count for systems that need multiple buses, external memory interfaces, high-speed signals, and substantial digital I/O without using a complex ball-grid-array package. Typical applications include industrial automation controllers, Ethernet-connected equipment, USB peripherals, CAN-based nodes, data acquisition units, building-control systems, and high-performance embedded gateways. The 114 available I/O pins are especially useful where several communications buses, status indicators, sensors, relays, and human-interface controls must share one controller. A single STM32F205ZFT6 can consolidate functions that might otherwise require several discrete controllers. PCB implementation should account for the LQFP-144 footprint's 20 mm by 20 mm body, fine-pitch leads, numerous decoupling requirements, and multiple supply domains. Place bypass capacitors close to the appropriate power pins, keep high-speed and communication traces short, and follow the pin-description and recommended-layout guidance in the manufacturer datasheet. Verify every peripheral signal, alternate function, and package connection before releasing the PCB. This page combines the key electrical characteristics, practical application guidance, package information, same-family drop-in alternatives, and design considerations needed to evaluate the STM32F205ZFT6 for a new embedded platform. It also highlights the memory and feature differences that must be reviewed before using another STM32F2 device as a second source.

RFQ Contact
STM32F205ZGT6 - 120MHz Cortex-M3 1MB MCU | STMicroelectronics
STM32F205ZGT6

STM32F205ZGT6 - 120MHz Cortex-M3 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F205ZGT6 is a 32-bit Arm Cortex-M3 microcontroller with a maximum operating frequency of 120 MHz, up to 1 MB of program Flash, 132 Kbytes of SRAM, and 114 general-purpose I/O pins. The device is supplied in a 144-pin LQFP package measuring 20 mm by 20 mm. It combines an ART Accelerator, memory protection unit, extensive connectivity, and mixed-signal resources for demanding embedded control designs. A microcontroller is a programmable system-on-chip containing a CPU core, memory, peripherals, and communication interfaces. Within the embedded-control hierarchy, this device is an Arm Cortex-M3 MCU, a real-time microcontroller, and a semiconductor designed to execute control software while sampling signals and communicating with external hardware. The STM32F205ZGT6 belongs to the STM32F2 series, where high processing throughput and broad peripheral integration support industrial, communications, and consumer equipment. The principal performance features are a 120 MHz Cortex-M3 core, 150 DMIPS execution capability, and ART Accelerator operation that supports zero-wait-state execution from Flash. Memory resources include up to 1 MB of Flash and 128 Kbytes of SRAM plus 4 Kbytes of backup SRAM. Peripheral integration includes three 12-bit ADCs, 17 timers, USB OTG high-speed and full-speed support, Ethernet, and multiple serial communication interfaces. Technically, the Cortex-M3 core uses a 32-bit RISC architecture and includes an MPU for memory isolation. The 114 I/O pins provide extensive connectivity for external memory, sensors, communications transceivers, and control outputs. The 144-LQFP package exposes substantially more I/O than smaller MCU packages, making the part suitable for systems that need several communication buses and parallel interfaces without relying on multiple expansion controllers. Typical uses include industrial Ethernet equipment, USB-connected data acquisition systems, building and access controllers, motor and power-control systems, instrumentation, and communications equipment. For Ethernet designs, the MCU can work alongside a dedicated Ethernet PHY, while USB and RS-232 or RS-485 interfaces can be implemented with suitable external transceiver circuitry. Designers should confirm every peripheral pin against the manufacturer pinout and maintain the required decoupling, clock, reset, and programming connections. Because the LQFP-144 footprint offers 114 I/O pins, careful planning is needed to avoid conflicts among high-speed, debug, analog, and communication functions. The SYSCFG and firmware configuration should also be reviewed before assigning alternate-function pins. This product overview combines the device's core, memory, package, interface, and application characteristics with practical selection guidance. It also identifies documented same-footprint alternatives while distinguishing true pin-compatible choices from devices that require different packages, memory configurations, or firmware adaptation.

RFQ Contact
STM32F207IEH6 - 120MHz Cortex-M3 MCU | STMicroelectronics
STM32F207IEH6

STM32F207IEH6 - 120MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F207IEH6 is a 32-bit Arm Cortex-M3 microcontroller operating at up to 120 MHz, with 512 KB of flash memory and a 176-ball plus 25-ball UFBGA package measuring 10 mm by 10 mm. It belongs to the STM32F20x family of high-performance Cortex-M3 microcontrollers, combining general-purpose embedded processing with a compact surface-mount package for space-constrained electronic systems. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces onto one package. Within the embedded-control hierarchy, the STM32F207IEH6 is an MCU, a microcontroller unit, rather than a discrete processor or fixed-function logic device. Its 32-bit Cortex-M3 architecture provides a common platform for executing control firmware, communication protocols, state machines, and supervisory functions in industrial, networking, consumer, and embedded equipment. The principal device characteristics include a maximum core frequency of 120 MHz, 512 KB of flash organized as 512K by 8 bits, and a 176+25 UFBGA package. The flash capacity permits firmware, configuration data, boot code, and application logic to be stored locally. The 120 MHz operating point supports timing-sensitive processing, while the 10 mm by 10 mm package supports compact PCB layouts in applications where connector density and board area are important design constraints. The STM32F20x family uses the Arm Cortex-M3 32-bit RISC core, and the STM32F207IEH6 is identified as a member of that family. Arm Cortex-M3 designs are commonly used for embedded control because they combine deterministic instruction execution with extensive peripheral integration. Exact peripheral availability, pin multiplexing, electrical limits, memory-map details, and clock-tree configuration should be confirmed in the official STM32F207IE datasheet before schematic capture or firmware development. Typical uses include industrial controllers, communications equipment, motor and motion-control systems, test and measurement products, and connected embedded devices. In these applications, the 512 KB flash capacity can consolidate application firmware into one controller, while the 120 MHz core supports combinations of protocol handling, control-loop execution, and background tasks. Designers should still partition memory and processor load after identifying the exact peripheral set and middleware requirements. A key implementation consideration is BGA assembly. The 176+25 UFBGA footprint requires a suitable PCB pad layout, controlled reflow profile, adequate solder-paste printing, and inspection coverage appropriate to the assembly process. Firmware configuration must also match the device's exact pinout, clock sources, and peripheral resources; use the manufacturer pin-definition and datasheet tables rather than assigning functions from another STM32 member. This product record combines the manufacturer's family identification, exact package and memory characteristics, sourcing information, and engineering-oriented replacement guidance. It also highlights the distinction between a mechanically similar microcontroller and a true drop-in replacement: footprint compatibility alone does not guarantee identical peripherals, electrical behavior, firmware support, or production qualification.

RFQ Contact
STM32F207IET6 - 120MHz Cortex-M3 MCU with 512KB Flash | STMicroelectronics
STM32F207IET6

STM32F207IET6 - 120MHz Cortex-M3 MCU with 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F207IET6 is a 32-bit ARM Cortex-M3 microcontroller with a 120 MHz maximum clock, 512 KB of programmable Flash, and 140 I/O pins in a 176-LQFP package. It belongs to the STM32F2 series of high-performance 32-bit microcontrollers and combines an ART Accelerator with Ethernet, USB, and camera-interface connectivity. A microcontroller is a programmable system-on-chip that integrates a CPU core, Flash memory, SRAM, peripheral interfaces, timers, and analog conversion blocks into one component. In the product hierarchy, the STM32F207IET6 is a 32-bit embedded microcontroller, a Cortex-M3-based microcontroller, and an STMicroelectronics STM32 family device designed for connected industrial, communications, and embedded-control equipment. Principal features include a 120 MHz ARM Cortex-M3 core, execution reaching 150 DMIPS or 1.25 DMIPS/MHz under Dhrystone 2.1 conditions, and an ART Accelerator that permits zero-wait-state execution from Flash memory. The device provides 512 KB of Flash, 132 KB of SRAM as reported for this package, and a hardware memory protection unit. Its communication resources include Ethernet, USB OTG high-speed and full-speed operation, camera connectivity, and multiple communication interfaces. Three 12-bit ADCs, 17 timers, and 15 communication interfaces support motor-control, sensing, and real-time data acquisition designs. The STM32F2 architecture is suitable for applications requiring higher peripheral density than entry-level Cortex-M devices while retaining the familiar ARM Cortex-M programming model, exception architecture, and ecosystem of development tools. Typical uses include industrial Ethernet controllers, USB-connected data acquisition equipment, camera-based inspection systems, networked embedded products, and industrial automation modules. The large 176-LQFP footprint exposes substantially more I/O than smaller microcontroller packages, making the device appropriate where parallel sensor inputs, actuator outputs, communications, and multiple analog channels must coexist on one board. When laying out a board, treat all 176 package leads as a dense fine-pitch fanout and route decoupling close to the supply pins. Preserve the reference-design decoupling values, provide clean analog and digital return paths, and verify that the external crystal, memory, and interface networks match the manufacturer reference schematics. Firmware changes should also be validated because alternative Cortex-M devices can use different peripheral registers even when the package is physically interchangeable. This page combines manufacturer-style technical specifications, verified package and memory details, drop-in candidate analysis, interface-specific application guidance, and practical design notes. It also distinguishes physical compatibility from software compatibility, an important consideration when selecting a second source for an STM32F2 design.

RFQ Contact
STM32F207IGT6 - 120MHz Cortex-M3 MCU | STMicroelectronics
STM32F207IGT6

STM32F207IGT6 - 120MHz Cortex-M3 MCU | STMicroelectronics

STMicroelectronics STM32F207IGT6 is a 32-bit Arm Cortex-M3 microcontroller operating up to 120 MHz, with 1 MB of Flash memory and 128 KB plus 4 KB of RAM in a 176-lead LQFP package measuring 24 mm by 24 mm. It is designed for high-performance embedded control, communications, and multimedia applications requiring extensive I/O and integrated connectivity. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, communication peripherals, timers, analog converters, and digital I/O. The STM32F2 series uses the Arm Cortex-M3 RISC architecture within the broader category of 32-bit embedded processors and microcontrollers. Its high-performance architecture, memory hierarchy, and peripheral mix allow one device to coordinate real-time control, data acquisition, communications, and human-machine-interface functions. Key features include a maximum 120 MHz operating frequency, performance of up to 150 DMIPS, an ART Accelerator that supports zero-wait-state execution from Flash, an MPU, and as many as 140 I/O pins. The device also integrates USB OTG HS/FS connectivity, an Ethernet MAC, three ADCs, 17 timers, approximately 15 communication interfaces, and camera-interface resources. The combination reduces the need for external interface components in connected industrial and communications equipment. The STM32F207IGT6 belongs to the STM32F207 family and is covered by the STM32F205xx, STM32F207xx, STM32F215xx, and STM32F217xx reference manual RM0033. Its memory organization supports firmware-heavy applications, while the Cortex-M3 core and hardware peripherals provide deterministic handling of real-time events. The ART Accelerator improves Flash execution performance, although final timing must be evaluated with the selected compiler, optimization settings, memory wait states, and peripheral clock configuration. Typical applications include industrial Ethernet controllers, USB-connected data-acquisition equipment, camera-based imaging modules, network appliances, motor-control and automation systems, and human-machine interfaces. Its 140 I/O pins are particularly useful when a design needs parallel display or control signals alongside serial communications. The 176-LQFP package also exposes more interface options than smaller MCU packages while remaining inspectable with standard assembly equipment. Designers should verify every 176-pin signal assignment against the manufacturer pinout and reference manual before routing the PCB. Power, decoupling, clock, reset, boot, and programming interfaces must follow the STM32F207 hardware guidelines. Firmware replacement should also be validated for startup behavior, peripheral differences, and any differences in clock-tree or communication configuration. This product page consolidates the key electrical, memory, connectivity, package, and sourcing characteristics of the STM32F207IGT6, together with practical application guidance and selection considerations. It also distinguishes verified device attributes from replacement questions that require a board-level, pin-by-pin engineering review.

RFQ Contact
STM32F207VCT6 - 32-bit ARM Cortex-M3 MCU, 256KB Flash | STMicroelectronics
STM32F207VCT6

STM32F207VCT6 - 32-bit ARM Cortex-M3 MCU, 256KB Flash | STMicroelectronics

The STMicroelectronics STM32F207VCT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M3 core, operating at up to 120 MHz. It features 256 KB of Flash memory and 128 KB of SRAM, making it suitable for a wide range of embedded applications. The device is housed in a 100-pin LQFP package (14x14 mm) and supports a supply voltage range of 1.8V to 3.6V. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F207VCT6 belongs to the STM32F2 series, which is part of the broader STM32 family of 32-bit Flash microcontrollers. This family is widely used in industrial control, consumer electronics, and IoT devices due to its balance of performance, power efficiency, and peripheral integration. Key features include a rich set of peripherals: 3x SPI, 3x I2C, 4x USART, 2x UART, 2x CAN, 1x USB 2.0 OTG FS, 1x USB 2.0 OTG HS, 1x Ethernet MAC, 1x SDIO, 1x FSMC, 2x 12-bit DAC, 3x 12-bit ADC (up to 24 channels), and multiple timers including advanced-control timers. The device also includes a cryptographic/hash processor for AES, DES, and SHA-1/MD5, and a true random number generator (RNG). The STM32F207VCT6 is built on a 90nm process technology, offering a good balance of speed and power consumption. It supports a wide operating temperature range of -40°C to +85°C, making it suitable for industrial environments. The Cortex-M3 core includes a Nested Vectored Interrupt Controller (NVIC) for efficient interrupt handling, and a Memory Protection Unit (MPU) for enhanced system reliability. Typical applications include industrial automation, motor control, medical devices, smart meters, and IoT gateways. The Ethernet MAC and USB OTG HS interfaces enable connectivity in networked systems, while the advanced timers and ADC/DAC support precise analog control loops. When designing with this device, ensure proper decoupling of the power supply pins and a stable clock source. The internal RC oscillator can be used for basic operation, but an external crystal is recommended for applications requiring precise timing. The device supports in-circuit programming and debugging via SWD and JTAG interfaces.

USD $7.32 Contact
STM32F207VGT6 - 32-bit ARM Cortex-M3 MCU, 1MB Flash | STMicroelectronics
STM32F207VGT6

STM32F207VGT6 - 32-bit ARM Cortex-M3 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F207VGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M3 core, operating at up to 120 MHz. It features 1 MB of Flash memory and 128 KB of SRAM, making it suitable for a wide range of embedded applications. The device is housed in a 100-pin LQFP package (LQFP100) and supports a supply voltage range of 1.8V to 3.6V. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. The STM32F207VGT6 belongs to the STM32F2 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This family is widely used in industrial control, consumer electronics, and IoT devices due to its balance of performance, power efficiency, and peripheral integration. Key features of the STM32F207VGT6 include a 120 MHz ARM Cortex-M3 core with 1.25 DMIPS/MHz, 1 MB of Flash memory, 128 KB of SRAM, and a comprehensive set of peripherals. It integrates a 12-bit ADC with up to 24 channels, a 12-bit DAC, multiple timers, USART, SPI, I2C, USB 2.0 OTG, Ethernet MAC, and a camera interface. The device also supports a flexible memory controller (FMC) for external memory expansion, and a cryptographic/hash processor for security applications. Technically, the STM32F207VGT6 is built on a 90nm process technology, offering a good balance between performance and power consumption. It features a nested vectored interrupt controller (NVIC) for efficient interrupt handling, and a memory protection unit (MPU) for enhanced system reliability. The device supports a wide operating temperature range of -40°C to +85°C, making it suitable for industrial environments. Typical applications include industrial control systems, motor drives, medical devices, point-of-sale terminals, and IoT gateways. The Ethernet MAC and USB OTG interfaces enable connectivity in networked applications, while the rich analog peripherals support sensor interfacing and data acquisition. When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The device supports multiple low-power modes, which can be leveraged to optimize energy consumption in battery-powered applications. Careful PCB layout is recommended to minimize noise and ensure reliable operation at high clock speeds.

USD $6.82 Contact
STM32F207VGT7 - 120MHz Cortex-M3 1MB MCU | STMicroelectronics
STM32F207VGT7

STM32F207VGT7 - 120MHz Cortex-M3 1MB MCU | STMicroelectronics

STMicroelectronics STM32F207VGT7 is a 32-bit Arm Cortex-M3 microcontroller rated up to 120 MHz, with 1 MB of Flash memory and a 100-pin LQFP package measuring 14 x 14 mm. The device combines an Arm Cortex-M3 RISC core, extensive connectivity, and mixed-signal peripherals in a single embedded-control package. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, analog converters, and I/O into one device. The STM32F2 series belongs to the hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M3 MCU, and system-on-chip device. Its combination of processing performance, networking capability, and external peripherals makes it suitable for connected industrial, communications, and consumer equipment. The STM32F207VGT7 provides up to 120 MHz operation, 1 MB of Flash memory, and USB, Ethernet, camera, and other communication interfaces. The manufacturer identifies the STM32F20x family as an Arm Cortex-M3 MCU family operating at up to 120 MHz. Its 100-LQFP package exposes substantially more I/O than smaller microcontroller packages, supporting parallel interfaces, multiple serial channels, analog inputs, and mixed communication peripherals. The STM32F207 family combines a high-performance Cortex-M3 core with extensive peripheral integration, including USB OTG high-speed and full-speed operation, Ethernet MAC, multiple timers, three ADCs, and up to 15 communication interfaces. This architecture allows real-time control tasks, communications, data acquisition, and graphical-camera data handling to share one processor platform while reducing external component count. Typical uses include industrial gateways, Ethernet-connected controllers, USB equipment, camera modules, building automation, data-acquisition systems, and consumer electronics. The 100-pin LQFP is especially useful when a design requires many peripheral connections but does not need the board area of a large BGA package. Its 14 x 14 mm outline still supports manageable industrial and embedded board layouts. Designers should preserve the STM32F2 hardware-design guidance for power, decoupling, clocking, reset, and signal routing. Pay particular attention to analog-supply filtering, high-speed USB and Ethernet layout, and the required startup and firmware programming interfaces. Confirm all electrical limits and pin assignments against the STM32F205xx and STM32F207xx manufacturer datasheet before releasing the PCB. This product page consolidates the confirmed 120 MHz performance, 1 MB Flash configuration, package information, connectivity features, application guidance, and design considerations into an engineering-focused reference. It also identifies same-family LQFP-100 alternatives and separates confirmed cross-reference candidates from those selected from established STM32 family knowledge.

RFQ Contact
STM32F207ZET6 - 32-bit ARM Cortex-M3 MCU, 512KB Flash | STMicroelectronics
STM32F207ZET6

STM32F207ZET6 - 32-bit ARM Cortex-M3 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F207ZET6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M3 core, operating at up to 120 MHz. It features 512 KB of Flash memory and 128 KB of SRAM, making it suitable for a wide range of embedded applications. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body, offering extensive I/O and connectivity options. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of countless electronic products, from automotive engine control units to consumer appliances and IoT devices. The STM32F207ZET6 belongs to the STM32F2 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers, positioned between the mainstream F1 series and the high-performance F4/H7 series. Key features of the STM32F207ZET6 include a 120 MHz ARM Cortex-M3 core with 1.25 DMIPS/MHz, 512 KB Flash, 128 KB SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs, 2x DACs, 4x USARTs, 2x UARTs, 3x SPI, 2x I2C, 2x CAN, 1x USB 2.0 OTG FS/HS, 1x Ethernet MAC, and a camera interface. It also includes a cryptographic/hash processor for AES, DES, and 3DES encryption, and a true random number generator (TRNG). The device operates from 1.8V to 3.6V supply and supports a temperature range of -40°C to +85°C (industrial grade). The STM32F207ZET6 is built on ST's advanced 90nm process technology, providing a balance of performance and power efficiency. The ART Accelerator™ (Adaptive Real-Time memory accelerator) enables zero-wait-state execution from Flash, maximizing the effective throughput of the Cortex-M3 core. The device also features a flexible memory controller (FMC) supporting external memory interfaces, including SRAM, PSRAM, NOR, and NAND Flash. Typical applications include industrial control systems, motor drives, PLCs, medical devices, point-of-sale terminals, networking equipment, and IoT gateways. The rich connectivity (Ethernet, USB, CAN) makes it ideal for applications requiring multiple communication interfaces. The cryptographic hardware accelerates secure communication protocols, enhancing data security in connected devices. When designing with this MCU, pay attention to power supply decoupling: place 100nF capacitors close to each VDD pin and a 4.7uF bulk capacitor. The VDDA analog supply should be filtered with a ferrite bead and 1uF capacitor to reduce noise for ADC accuracy. Also, configure the boot pins correctly to select the desired boot source (Flash, SRAM, or system memory).

RFQ Contact
STM32F207ZGT6 - 32-bit ARM Cortex-M3 MCU, 1MB Flash | STMicroelectronics
STM32F207ZGT6

STM32F207ZGT6 - 32-bit ARM Cortex-M3 MCU, 1MB Flash | STMicroelectronics

The STM32F207ZGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M3 core running at up to 120 MHz. It integrates 1 MB of Flash memory and 128 KB of SRAM, making it suitable for complex embedded applications requiring substantial code and data storage. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body, offering a rich set of peripherals and I/O capabilities. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals. The STM32F207ZGT6 belongs to the STM32F2 series, which is part of the broader STM32 family of 32-bit Flash microcontrollers. This family is widely used in industrial control, consumer electronics, and IoT devices due to its balance of performance, power efficiency, and peripheral integration. Key features of the STM32F207ZGT6 include a 120 MHz ARM Cortex-M3 core with 1.25 DMIPS/MHz, 1 MB of Flash memory, 128 KB of SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs, 2x DACs, 4x USARTs, 2x UARTs, 3x SPI, 2x I2C, 2x CAN, 1x USB 2.0 OTG FS/HS, 1x Ethernet MAC, and a camera interface. It also features a flexible memory controller (FMC) for external memory expansion, a true random number generator (RNG), and a cryptographic acceleration cell for AES, DES, and 3DES. The STM32F207ZGT6 is built on a 90nm process technology, offering a good balance between performance and power consumption. It operates from a 1.8V to 3.6V power supply and supports a wide temperature range of -40°C to +85°C. The device includes multiple low-power modes (Sleep, Stop, Standby) to optimize energy consumption in battery-powered applications. Typical applications include industrial automation, motor control, medical devices, point-of-sale terminals, and IoT gateways. The Ethernet MAC and USB OTG support enable connectivity in networked systems, while the rich analog peripherals suit data acquisition and control loops. When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The device supports external crystal oscillators (4-26 MHz) and an internal 16 MHz RC oscillator. For high-speed USB and Ethernet, an external 25 MHz crystal is recommended. The boot pins must be configured correctly for programming via USART or USB.

RFQ Contact