ADC/DAC
بەرهەمەکان (3,600+)
ADS1212U - 22-Bit 6.25 kSPS ADC | Texas Instruments
The Texas Instruments ADS1212U is a precision delta-sigma analog-to-digital converter with 22-bit no-missing-code performance, a maximum conversion rate of 6.25 kSPS, and an 8-pin SOIC package. Designed for a single +5 V supply, the device accepts differential inputs suitable for low-level sensor signals and transducer outputs. A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time sigma-delta modulation and digital filtering to provide high resolution, excellent noise performance, and wide dynamic range. The ADS1212U belongs to the broader precision ADC hierarchy, where it supports measurement systems that require more accuracy than ordinary general-purpose converters while retaining a straightforward serial interface. The primary features include one differential input channel, 22-bit effective resolution, and operation from a single +5 V supply. Its flexible synchronous serial interface is SPI compatible and also supports a two-wire control mode intended to reduce implementation cost in low-cost isolation arrangements. A conversion rate of up to 6.25 kSPS makes the converter suitable for instrumentation that must capture relatively slow, high-accuracy measurements. Internally, the device uses a delta-sigma architecture to achieve wide dynamic range and 22-bit no-missing-code performance. Its differential input structure helps reject common-mode noise when the source is close to the converter's analog ground. The serial interface provides a compact solution for communicating conversion results to a microcontroller, digital controller, or industrial measurement system. Typical applications include smart transmitters, industrial process-control loops, weigh scales, chromatography systems, portable instrumentation, and low-level pressure or temperature measurement. Differential excitation is particularly useful with bridge sensors and other transducers that generate small signals relative to their common-mode voltage. When implementing a circuit around the ADS1212U, verify the input common-mode range, allowable differential input voltage, and external reference requirements against the manufacturer datasheet. Provide a quiet +5 V supply, decouple the analog and digital sections appropriately, and route the differential input pair symmetrically to reduce conversion errors and noise pickup. This product record combines manufacturer specifications, distributor availability information, package details, pricing evidence, verified alternatives, and application-specific design guidance. It is intended to help engineers evaluate the ADS1212U for precision measurement systems while separately checking any replacement against pinout, interface timing, input range, reference voltage, and acquisition requirements.
ADS1212UG4 - 22-Bit Delta-Sigma ADC | Texas Instruments
The Texas Instruments ADS1212UG4 is a precision 22-bit delta-sigma analog-to-digital converter with one differential input channel, a 6.25 kSPS conversion rate, and a single +5 V supply. The device is offered in an 18-pin SOP package and combines programmable gain, low power consumption, and an SPI-compatible serial interface for precision measurement systems. A delta-sigma analog-to-digital converter is an ADC category that uses oversampling, noise shaping, and digital filtering to provide high resolution and excellent noise performance. The ADS1212 belongs to the broader ADC and data-converter hierarchy, where its differential input architecture helps reject common-mode noise when measuring low-level signals from sensors, bridges, strain gauges, and transducers. Its internal digital filter provides a conventional conversion result while the serial interface transfers data to a controller. The manufacturer describes 22-bit resolution with no missing codes and up to 24-bit ADC resolution. Effective resolution is 20 bits at a 10 Hz data rate and 16 bits at 1000 Hz. Differential inputs support direct connection to low-level voltage sources, while the programmable gain amplifier allows the front end to scale small sensor outputs before conversion. Low power consumption of 1.4 mW is useful in portable and distributed measurement equipment. The delta-sigma architecture prioritizes resolution and noise behavior rather than the very high throughput associated with flash or successive-approximation ADCs. A 6.25 kSPS maximum conversion rate is appropriate for slow-changing process, temperature, pressure, and load signals. SPI-compatible SSI communication simplifies connection to microcontrollers and digital signal processors, while programmable operating characteristics support different bandwidth and noise tradeoffs. Typical uses include industrial process-control loops, factory monitoring, portable instrumentation, pressure and temperature sensing, bridge-based measurements, and low-level battery-powered acquisition systems. For transducer measurements, the ADS1212 can combine differential input capability with programmable gain and digital filtering. For communications or test equipment, its serial interface reduces pin count and supports deterministic digital data transfer. Designers should treat analog input filtering, reference quality, grounding, and digital-interface isolation as central to achieving the converter's rated performance. Select the data rate, gain, and digital-filter settings together because increasing conversion speed reduces the effective noise-free resolution. Confirm the complete pin description and recommended external component values in the manufacturer datasheet before laying out the board. This page organizes the key ADS1212UG4 specifications, package considerations, drop-in alternatives, application guidance, and practical design notes. It also distinguishes exact datasheet characteristics from engineering choices such as filtering, gain, grounding, and data-rate configuration, helping engineers evaluate the converter before PCB implementation.
ADS1213E - 22-Bit 4-Channel Delta-Sigma ADC | Texas Instruments
Texas Instruments ADS1213E is a 22-bit, four-channel delta-sigma analog-to-digital converter with a maximum data rate of 6.25 kSPS, an internal voltage reference, and a programmable-gain amplifier. The device is offered in the ADS1213E configuration as a 28-pin SSOP. It provides 20 bits of effective resolution at 10 Hz and 16 bits at 1,000 Hz, combining high resolution with a low reported power consumption of 1.4 mW. A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time oversampling, digital filtering, and quantization to produce a high-resolution digital result. The ADS1213 belongs to the broader ADC and data-converter hierarchy, where its differential inputs, programmable gain, selectable data rates, and serial interface make it suitable for precision analog measurement systems. The four-channel input multiplexer allows related sensor signals to be measured sequentially rather than requiring a separate converter for every channel. Key features include 22-bit conversion resolution, four analog inputs, differential input support, a programmable-gain amplifier, and a 6.25 kSPS maximum data rate. Effective resolution is application-dependent because the reported values of 20 bits at 10 Hz and 16 bits at 1,000 Hz reflect the interaction among conversion speed, filtering, noise, and signal bandwidth. The integrated reference and programmable gain reduce the number of external precision components required in many measurement designs. The serial interface is SPI compatible and also supports a two-wire control mode described by Texas Instruments. Two-wire operation can simplify connections to low-cost isolation components, while SPI compatibility supports a broader range of digital controllers. Configuration registers allow the system to select data rate, gain, channel, and operating modes, although the complete register sequence should be implemented according to the manufacturer datasheet. Typical measurement uses include bridge-based sensing, industrial process instrumentation, low-level analog signal acquisition, and multichannel sensor monitoring. The combination of differential inputs and programmable gain is particularly useful when a sensor produces a small differential signal around a common-mode voltage. Four channels also support multiplexed sensing, although the complete settling time and acquisition sequence must be allowed before each converted result is used. Design consideration: the conversion data rate must be selected together with the digital filter, input impedance, gain setting, and reference configuration. Differential input routing, guarding around sensitive analog pins, and a low-noise reference and supply arrangement are more important than simply maximizing the nominal 22-bit converter resolution. This page consolidates the verified manufacturer and distributor information for ADS1213E, distinguishes its documented conversion performance from application-dependent effective resolution, and identifies the design information still required to finalize a complete analog front end.
ADS1213E/1K - 22-Bit 4-Channel Delta-Sigma ADC | Texas Instruments
Texas Instruments ADS1213E/1K is a 22-bit, 6.25-kSPS, four-input delta-sigma analog-to-digital converter with an internal or external reference, programmable gain amplifier, and serial interface in a 28-pin SSOP package. It operates from a single 5 V supply across the industrial temperature range of -40°C to +85°C. A delta-sigma ADC is a type of analog-to-digital converter that uses a high-resolution internal modulator and digital filtering to convert continuous analog voltages into digital codes. The ADS1213 belongs to the ADC, data-converter IC, and signal-processing semiconductor hierarchies. It is intended for precision measurement systems requiring high resolution, integrated channel multiplexing, and flexible gain control. Key features include 22-bit nominal resolution, four analog input channels, conversion throughput up to 6.25 kSPS, and a programmable gain amplifier. The device supports internal and external voltage references, which permits either an on-chip reference implementation or a more precise external source. Its serial interface reduces the number of external connections required in multi-channel measurement equipment. Technically, the converter combines delta-sigma conversion, digital filtering, channel multiplexing, and programmable gain in one integrated circuit. The four-input architecture makes it suitable for bridge, sensor, voltage, and current measurements that require multiple analog channels. Because it is a single-supply device, the converter simplifies system-level power planning when the measured signals remain within the supported analog input range. Typical applications include industrial pressure and temperature measurement, strain-gauge and bridge excitation systems, laboratory instrumentation, process monitoring, and precision data-acquisition modules. The integrated programmable gain amplifier can reduce the need for external analog conditioning when the source signal lies within a selectable gain range. A critical layout consideration is that reference, supply, and analog-input traces should be routed away from high-current digital switching paths. Place input and reference capacitors close to their associated pins, use a quiet ground return, and maintain consistent grounding between the converter and the sensor interface. Confirm the absolute and differential input limits before applying bipolar signals. This page combines manufacturer specifications, package details, engineering guidance, application fit, and verified drop-in information to support component selection and PCB implementation without reproducing the complete manufacturer datasheet.
ADS1213EG4 - 22-bit Delta-Sigma ADC, 4-Ch, SPI | Texas Instruments
The Texas Instruments ADS1213EG4 is a precision 22-bit delta-sigma analog-to-digital converter with 4 input channels, an integrated programmable gain amplifier (PGA), and on-chip voltage reference, packaged in a 28-pin SSOP. It operates from a single +5V supply, delivers up to 6.25 kSPS output data rate, and achieves 22 bits of no-missing-codes performance with 20 bits effective resolution at 10 Hz, dropping to 16 bits at 1 kHz. Low power consumption of 1.4 mW makes it suitable for battery-powered and industrial instrumentation systems. A delta-sigma ADC (also called sigma-delta or oversampling converter) is a converter architecture that trades raw speed for resolution by oversampling the input and using digital filtering to shape quantization noise out of the signal band. Within the broader hierarchy, a delta-sigma ADC is a subset of precision ADC > data converter > signal chain IC > semiconductor. Delta-sigma ADCs dominate high-resolution, low-frequency measurement because their inherent noise shaping rejects broadband noise that would otherwise limit resolution. Key features of the ADS1213EG4 include a programmable gain amplifier with gain settings from 1 to 16, a synchronous SPI-compatible serial interface with optional two-wire mode for galvanic isolation, differential input architecture for direct transducer connection, and an internal 4-channel input multiplexer for multi-channel scanning. The on-chip reference and self-calibration functions remove most offset and gain errors at the system level, simplifying firmware burden. The device uses a fourth-order delta-sigma modulator with a switched-capacitor front end, followed by a decimation-by-64 to 2048 digital filter. Effective resolution is a function of data rate, PGA gain, and reference voltage, so designers should consult the ADS1212/ADS1213 datasheet noise tables when matching dynamic range to a target transducer output. Typical applications include industrial process control weigh scales, direct thermocouple and RTD temperature measurement, multi-channel pressure transducers, instrumentation front ends, and precision sensor signal conditioning. The combination of low power, integrated PGA, and on-chip reference makes the ADS1213EG4 well suited to remote or handheld measurement nodes where PCB area is at a premium. When designing with this part, pay close attention to analog supply decoupling and the differential input common-mode range. Use a low-thermal-EMF ground layout around the analog inputs; even a few nanovolts of stray thermocouple voltage between the input traces and the reference ground can corrupt 22-bit measurements. This page synthesizes distributor stock and pricing, drop-in alternative cross-references, and engineering design notes that go beyond what the manufacturer datasheet alone provides, helping engineers both evaluate and qualify the ADS1213EG4 for production designs.
ADS1213P - 22-Bit, 6.25-kSPS Delta-Sigma ADC | Texas Instruments
Texas Instruments ADS1213P is a 22-bit delta-sigma analog-to-digital converter with four differential input channels, a 6.25-kSPS maximum data rate, programmable gain, an internal voltage reference, and a 24-pin plastic DIP package. It combines high resolution with low power consumption and is designed for precision measurement of low-level differential signals. A delta-sigma ADC is a voltage-regulating ADC category that uses oversampling, noise shaping, and digital filtering to convert analog inputs into high-resolution digital codes. Within the broader semiconductor hierarchy, the ADS1213P belongs to the analog-to-digital converter, data-converter IC, and precision-measurement families. Its differential inputs, programmable gain amplifier, and low-noise architecture are especially useful when measuring signals from sensors, strain gauges, bridges, and industrial transducers. The converter provides 22-bit resolution, 20-bit effective resolution at 10 Hz, and 16-bit effective resolution at 1 kHz. A programmable data rate extends up to 6.25 kSPS, allowing designers to trade conversion speed against noise performance. Differential inputs reject common-mode noise, while programmable gain accommodates low-level transducer outputs without requiring a separate instrumentation amplifier. The ADS1213 architecture includes a four-channel input multiplexer, delta-sigma modulator, programmable gain amplifier, internal reference, and digital interface. The SPI-compatible synchronous serial interface supports conventional SPI communication and a two-wire control mode for isolation-oriented designs. The device is optimized for low power, with a cited consumption of 1.4 mW, making it suitable for compact, precision-oriented measurement systems. Typical uses include factory automation, process monitoring, load-cell and pressure-transducer measurement, temperature acquisition, portable instrumentation, and low-level industrial sensor interfaces. The four differential input channels allow a compact controller to monitor several related bridges without requiring a separate analog multiplexer. Designers should pay close attention to input common-mode range, reference accuracy, digital filtering, and data-rate selection. Differential routing should minimize mismatched traces and ground-loop area, while the serial interface and converter clock require clean layout to preserve conversion accuracy. This product page combines the manufacturer’s core specifications, application guidance, package information, and drop-in replacement assessment. It also distinguishes electrical fit from mere functional similarity, helping engineers determine whether a proposed replacement is truly pin-compatible before committing to a board revision.
ADS1213U - 22-Bit, 6.25 kSPS Delta-Sigma ADC | Texas Instruments
Texas Instruments ADS1213U is a 22-bit, 6.25 kSPS, 8-channel delta-sigma analog-to-digital converter with a programmable gain amplifier, internal reference, and SPI-compatible SSI interface, packaged in a 24-pin SOIC. The converter supports four differential or eight single-ended input channels through its integrated input multiplexer, making it suitable for precision industrial measurement systems that require multiple sensor inputs and high resolution. A delta-sigma ADC is a signal-conversion IC that uses oversampling, digital filtering, and noise shaping to exchange conversion speed for high resolution and noise performance. The ADS1213U belongs to the ADC/DAC category within the broader data-converter and signal-processing hierarchy. Its architecture is intended for low-bandwidth industrial signals where 22-bit nominal resolution can improve measurement fidelity without requiring a high-speed successive-approximation ADC. Key features include 22-bit conversion resolution, a maximum data rate of 6.25 kSPS, differential inputs, a programmable gain amplifier, an internal voltage reference, and a flexible synchronous serial interface. The verified data also identifies 20-bit effective resolution at 10 Hz and 16-bit effective resolution at 1000 Hz. Operation from a single +5 V supply and a stated low-power figure of 1.4 mW align the device with embedded measurement systems that must balance precision, conversion speed, and energy use. The integrated four-channel input multiplexer supports analog-front-end designs that would otherwise require external analog switching. The programmable gain stage can condition low-level sensor outputs before conversion, while the delta-sigma conversion path suppresses out-of-band noise. The SPI-compatible SSI interface and two-wire control mode described by Texas Instruments simplify host communication and can reduce isolated-system implementation complexity when appropriately designed. Typical uses include pressure and temperature transmitters, industrial process monitoring, strain-gauge and bridge-sensor acquisition, laboratory instrumentation, and low-speed data loggers. Its 6.25 kSPS maximum rate favors continuous sensor monitoring rather than waveform capture or high-speed motor-control feedback. Systems requiring several channels can also multiplex analog inputs around the converter while retaining programmable gain and synchronized serial output. Designers should account for the conversion-time penalty associated with delta-sigma filtering, verify the input common-mode range at every programmable-gain setting, and follow the manufacturer’s reference layout and decoupling recommendations. The integrated reference and programmable gain simplify the analog front end, but sensor excitation, protection, grounding, and digital-interface isolation still require careful implementation. This page consolidates verified manufacturer and distributor details, practical application guidance, parameter comparisons, and drop-in replacement information. It also distinguishes the verified ADS1213U from ordering-code or package variants that are not confirmed as pin-compatible substitutes.
ADS1213U/1K - 22-Bit 4-Channel Delta-Sigma ADC | Texas Instruments
The Texas Instruments ADS1213U/1K is a 22-bit delta-sigma analog-to-digital converter with a four-channel analog input multiplexer, a 6.25-kSPS maximum conversion rate, an internal voltage reference, and a programmable gain amplifier. The device is packaged in a 24-pin SOIC and operates from a nominal 5 V supply over an industrial temperature range of -40 °C to +85 °C. These headline specifications position it as a precision serial-interface ADC for low-frequency instrumentation. A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling, digital filtering, and noise shaping to convert analog voltages into high-resolution digital data. The ADS1213 belongs to the ADC hierarchy that includes precision converters, serial-interface ADCs, and data-converter integrated circuits. Its four-input multiplexer allows one conversion system to monitor multiple analog nodes while retaining the resolution and low-speed measurement focus associated with high-performance delta-sigma conversion. Key features include 22-bit resolution, four single-ended analog inputs, a 6.25-kSPS conversion rate, an internal reference, and a programmable gain amplifier. The flexible synchronous serial interface is SPI compatible and also supports a two-wire control mode for lower-cost isolation. The industrial-grade -40 °C to +85 °C range supports factory automation, process control, instrumentation, and embedded measurement systems where a small number of slowly changing analog signals must be digitized accurately. The converter architecture emphasizes resolution rather than high-throughput sampling. Its 4-channel input structure reduces the number of separate converters needed when several sensors share a measurement system. An internal reference and PGA simplify analog front-end design by reducing external reference and gain-control requirements, although the final input range still depends on the selected gain and reference configuration. The serial interface permits compact PCB routing and straightforward connection to microcontrollers, DSPs, and industrial controllers. Typical uses include pressure and temperature sensor acquisition, process-line monitoring, laboratory measurement equipment, factory automation, low-speed energy metering, and industrial data loggers. The ADS1213U/1K is especially appropriate when high resolution, multiple analog channels, and a compact 24-SOIC footprint matter more than thousands of conversions per second. It is less suitable for waveform capture, communications receivers, or other applications requiring wide bandwidth and very high sample rates. Designers should determine the actual input range, digital filter behavior, data rate, and reference accuracy from the manufacturer datasheet before setting the analog front end. Input protection, source impedance, grounding, and serial-interface timing also need validation. Keep analog and digital return paths controlled, provide local supply bypassing, and account for the acquisition settling time of the delta-sigma conversion stage. This page organizes the ADS1213U/1K specifications, verified source links, ordering information, drop-in substitution limits, comparison parameters, and application-focused design guidance. It highlights where the 22-bit resolution and four-channel multiplexing add value while preserving an explicit distinction between confirmed ordering variants and functionally similar devices that require redesign.
ADS1216Y/2K - 24-Bit, 8-Channel Delta-Sigma ADC | TI
The Texas Instruments ADS1216Y/2K is a 24-bit, eight-channel delta-sigma analog-to-digital converter with a maximum conversion rate of 780 samples per second, SPI-compatible serial communication, and a 48-pin TQFP (7 mm × 7 mm) package. It operates from 2.7 V to 5.25 V and supports direct measurement of low-level transducer and process-control signals. A delta-sigma ADC is a high-resolution data-converter category that uses continuous-time oversampling, digital filtering, and noise shaping to extract precise measurements from noisy or low-level analog signals. Within the broader hierarchy, it is an analog-to-digital converter, data-converter IC, and mixed-signal semiconductor designed for instrumentation and industrial measurement systems. The ADS1216 multiplexes eight analog input channels and includes selectable internal input buffering for high input impedance. Integrated burnout current sources help identify open or shorted sensors, while the programmable gain amplifier supports low-level signal conditioning. An 8-bit DAC provides offset correction over a range equal to 50% of full scale, and the device also includes a reference input, programmable gain, digital I/O, and RAM for measurement configuration. Its SPI-compatible interface connects the converter to a host controller, while eight digital I/O pins can operate as inputs or outputs. These features allow a single device to handle sensor multiplexing, gain selection, offset correction, diagnostics, and digital control functions. The 780 samples-per-second conversion rate is suited to precision control and measurement systems that prioritize resolution and noise performance over high-rate waveform acquisition. Typical uses include smart transmitters, industrial process control, weight scales, chromatography, portable instrumentation, pressure measurement, bridge-sensor signal acquisition, laboratory data acquisition, and embedded sensor interfaces. The buffered inputs are particularly useful when transducers have high source impedance or when the measurement front end requires limited loading. PCB design should keep analog inputs, voltage reference connections, and ground returns short and isolated from digital switching paths. Follow the manufacturer datasheet for the recommended bypass-capacitor network, reference implementation, exposed-pad layout, and analog-ground connection. Configure the gain, data rate, digital filter, and channel sequence for the required resolution, settling time, and rejection of line-frequency interference. This page combines the converter's principal operating characteristics, application guidance, replacement considerations, and practical implementation notes into a design-focused reference for engineers evaluating high-resolution multiplexed measurement.
ADS1217 - 8-Channel 24-Bit Delta-Sigma ADC | Texas Instruments
The ADS1217 is a precision, wide dynamic range, delta-sigma analog-to-digital converter (ADC) with 24-bit resolution, designed for high-resolution measurement applications. It operates from a 2.7V to 5.25V supply and provides up to 24 bits of no missing code performance with an effective resolution of 22 bits. The device features eight multiplexed input channels, an internal programmable gain amplifier (PGA) with gains from 1 to 128, and a flexible serial interface. It is available in a 48-pin TQFP package (PFB) and is manufactured by Texas Instruments. A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling and noise shaping to achieve high resolution. It is part of the ADC family, which converts analog signals into digital data for processing by microcontrollers or DSPs. Delta-sigma ADCs are known for their excellent linearity and low noise, making them ideal for precision measurement applications where accuracy is critical. Key features of the ADS1217 include 24-bit no missing codes, INL of 0.0012% of FSR (max), full-scale input of ±2VREF, and a PGA with gains from 1 to 128. It offers 22 bits of effective resolution at PGA=1 and 19 bits at PGA=128. The device supports single-cycle settling mode and programmable data output rates up to 1kHz. It also includes an on-chip 1.25V/2.5V reference, reducing external component count. Technically, the ADS1217 uses a delta-sigma modulator followed by a digital filter, achieving high resolution through oversampling. The multiplexed inputs allow multiple sensors to be connected, and the PGA amplifies small signals before conversion, improving dynamic range. The device includes an internal buffer that can be selected to provide high input impedance, simplifying sensor interfacing. Typical applications include smart transmitters, industrial process control, weigh scales, chromatography, and portable instrumentation. Its high resolution and low noise make it suitable for precision measurement systems where accuracy is paramount. The wide input range and programmable gain allow it to handle a variety of sensor outputs. When designing with the ADS1217, ensure proper decoupling of the analog and digital supplies and use a clean reference voltage. The PGA gain setting should be chosen to maximize dynamic range while avoiding saturation. The serial interface allows easy connection to microcontrollers, and the single-cycle settling mode is useful for multiplexed applications.
ADS1220 - 24-Bit Low-Power ADC with PGA | Texas Instruments
The ADS1220 is a precision, 24-bit, delta-sigma (ΔΣ) analog-to-digital converter (ADC) from Texas Instruments, designed for low-power, high-resolution measurement of small sensor signals. It integrates a programmable gain amplifier (PGA), a voltage reference, two programmable current sources, and a temperature sensor, significantly reducing system cost and component count. The device operates from a 2.3 V to 5.5 V supply and consumes as low as 120 μA in duty-cycle mode, making it ideal for battery-powered and loop-powered applications. It is available in a leadless VQFN-16 or a TSSOP-16 package and is specified over a temperature range of -40°C to +125°C. An analog-to-digital converter (ADC) is an electronic component that converts continuous analog signals into discrete digital values, enabling microcontrollers and digital processors to interpret real-world physical quantities such as temperature, pressure, and strain. The ADS1220 belongs to the family of delta-sigma ADCs, which use oversampling and noise shaping to achieve high resolution (24 bits) and excellent noise performance. Within the signal chain hierarchy, the ADS1220 sits between the sensor and the digital host, often following a signal conditioning stage and preceding a microcontroller or DSP. Its integrated PGA and reference eliminate the need for external precision components, simplifying the design and improving overall accuracy. Key features of the ADS1220 include a programmable gain from 1 V/V to 128 V/V, programmable data rates up to 2 kSPS, and up to 20 bits of effective resolution. It supports two differential or four single-ended inputs, and includes a 2.048 V reference with low drift. The device also provides simultaneous 50-Hz and 60-Hz rejection, which is critical for industrial applications where power-line noise is prevalent. The integrated temperature sensor and current sources enable direct RTD and thermocouple measurements without additional circuitry. Technically, the ADS1220 uses a delta-sigma modulator followed by a digital filter, achieving high accuracy with minimal external components. The PGA allows small sensor signals to be amplified before conversion, improving signal-to-noise ratio. The device communicates via a 4-wire SPI interface, and includes a data-ready (DRDY) pin for synchronization. The low-power architecture, combined with a wide supply range, makes it versatile for both portable and industrial designs. Typical applications include temperature measurement with RTDs and thermocouples, pressure and load-cell sensing, 4-20 mA loop-powered transmitters, and portable instrumentation. The ADS1220's low power consumption and integrated features make it particularly well-suited for field transmitters and battery-operated devices where power efficiency is critical. When designing with the ADS1220, ensure proper decoupling of the AVDD and DVDD supplies, and place the reference bypass capacitor close to the REFP/REFN pins. The PGA gain and data rate settings should be chosen to balance resolution and speed for the specific sensor bandwidth. For best noise performance, use a low-noise reference and minimize digital switching noise near the analog inputs.
ADS1220IPW - 24-Bit 2kSPS Delta-Sigma ADC | Texas Instruments (Tape & Reel)
The Texas Instruments ADS1220IPW is a 24-bit, 2-kSPS, four-channel, low-power delta-sigma analog-to-digital converter with an integrated programmable gain amplifier (PGA), voltage reference, SPI interface and two programmable excitation current sources (IDACs), housed in a 16-pin TSSOP package rated from -40C to +125C. A delta-sigma ADC is a type of analog-to-digital converter that oversamples the input signal and applies digital filtering to achieve very high resolution, making it the dominant architecture in the precision data-converter hierarchy (ADC -> precision ADC -> sigma-delta ADC -> data converter) for measuring small sensor signals. Where successive-approximation (SAR) ADCs favor speed, delta-sigma converters favor noise-free resolution, which is why they dominate sensor front ends. Key features of the ADS1220 include a flexible input multiplexer supporting two differential or four single-ended inputs, a low-noise PGA that reduces system component count, two integrated matched IDACs for ratiometric 3-wire and 4-wire RTD measurements, and an on-chip reference that eliminates external reference circuitry. The integration of PGA, VREF and IDACs in a small TSSOP-16 footprint is the part's central value proposition: TI positions it explicitly as a way to reduce system cost and bill-of-materials count in small-signal sensor applications. Architecturally, the device combines the delta-sigma modulator with a programmable digital filter, allowing trade-offs between output data rate (up to 2 kSPS) and noise performance. The SPI-compatible serial interface provides data reads, register configuration, and a DRDY output for deterministic cycle timing, simplifying interfacing with any MCU, including TI MSP430 and other low-power hosts. Typical applications include RTD and thermocouple temperature measurement, bridge sensors such as load cells and pressure sensors, battery monitoring, and portable industrial instrumentation where low power and small size matter. Design consideration: use the two IDACs with a precision reference resistor to build ratiometric RTD front ends; this cancels IDAC drift from the measurement, but budget the PGA headroom so IDAC compliance voltage plus sensor drop stays within the supply. This page synthesizes distributor pricing, drop-in alternatives, pinout, design notes and comparison data not consolidated in the manufacturer datasheet.
ADS1220IPWR - 24-Bit 2kSPS Delta-Sigma ADC | Texas Instruments
The Texas Instruments ADS1220IPWR is a 24-bit, 2-kSPS, four-channel, low-power delta-sigma analog-to-digital converter with an integrated programmable gain amplifier (PGA), voltage reference, SPI interface and two programmable excitation current sources (IDACs), housed in a 16-pin TSSOP package rated from -40C to +125C. A delta-sigma ADC is a type of analog-to-digital converter that oversamples the input signal and applies digital filtering to achieve very high resolution, making it the dominant architecture in the precision data-converter hierarchy (ADC -> precision ADC -> sigma-delta ADC -> data converter) for measuring small sensor signals. Where successive-approximation (SAR) ADCs favor speed, delta-sigma converters favor noise-free resolution, which is why they dominate sensor front ends. Key features of the ADS1220 include a flexible input multiplexer supporting two differential or four single-ended inputs, a low-noise PGA that reduces system component count, two integrated matched IDACs for ratiometric 3-wire and 4-wire RTD measurements, and an on-chip reference that eliminates external reference circuitry. The integration of PGA, VREF and IDACs in a small TSSOP-16 footprint is the part's central value proposition: TI positions it explicitly as a way to reduce system cost and bill-of-materials count in small-signal sensor applications. Architecturally, the device combines the delta-sigma modulator with a programmable digital filter, allowing trade-offs between output data rate (up to 2 kSPS) and noise performance. The SPI-compatible serial interface provides data reads, register configuration, and a DRDY output for deterministic cycle timing, simplifying interfacing with any MCU, including TI MSP430 and other low-power hosts. Typical applications include RTD and thermocouple temperature measurement, bridge sensors such as load cells and pressure sensors, battery monitoring, and portable industrial instrumentation where low power and small size matter. Design consideration: use the two IDACs with a precision reference resistor to build ratiometric RTD front ends; this cancels IDAC drift from the measurement, but budget the PGA headroom so IDAC compliance voltage plus sensor drop stays within the supply. This page synthesizes distributor pricing, drop-in alternatives, pinout, design notes and comparison data not consolidated in the manufacturer datasheet.
ADS1220IRVAR - 24-Bit 2kSPS Delta-Sigma ADC with PGA | Texas Instruments
The Texas Instruments ADS1220IRVAR is a 24-bit, 2-kSPS, four-channel, low-power delta-sigma analog-to-digital converter with integrated programmable gain amplifier (PGA), internal 2.048 V voltage reference, two matched programmable excitation current sources (IDACs), and an SPI-compatible serial interface, housed in a 16-pin VQFN (3.5 mm x 3.5 mm) package with exposed thermal pad. A delta-sigma ADC is a type of analog-to-digital converter that oversamples the input signal far above Nyquist and applies digital filtering to push quantization noise out of band, achieving very high resolution. It is the dominant architecture for precision sensor measurement (ADC -> data converter -> mixed-signal front end -> semiconductor). The ADS1220 sits in TI's precision ADC portfolio alongside the ADS1120 (lower channel count, similar feature set) and the ADS131M family (higher speed, simultaneous-sampling focus). Key features include a flexible input multiplexer supporting two differential or four single-ended inputs, a low-noise chopper-stabilized PGA with gains of 1, 2, 4, 8, 16, 32, 64, and 128, two matched programmable excitation current sources up to 1.5 mA for ratiometric RTD and thermistor measurements, a burnout current source for open-wire sensor detection, and a 2.048 V integrated reference with 10 ppm/C typical drift. The digital filter provides simultaneous 50 Hz and 60 Hz line-noise rejection at 20 SPS. Technically, the ADS1220 achieves up to 20 bits effective resolution at the maximum 2 kSPS data rate and up to 29.5 bits noise-free resolution at 20 SPS, using a third-order delta-sigma modulator followed by a configurable SINC digital filter. The SPI interface supports clock speeds up to 4.5 MHz with optional CRC packet checking for robust communication in electrically noisy industrial environments. Typical applications include RTD and thermocouple temperature measurement, bridge sensor (load cell, strain gauge) signal digitization, battery cell voltage monitoring, and portable instrumentation such as handheld multimeters, where its low quiescent current and high channel integration reduce both system size and energy budget. Design consideration: for ratiometric RTD designs, route the IDAC excitation current through the reference resistor so reference and ADC share the same supply drift; keep AVDD between 2.3 V and 5.5 V, decouple both AVDD and DVDD with 1 uF X7R ceramics placed within 5 mm of the pins, and ground the exposed thermal pad directly to the analog ground plane. This page synthesizes distributor pricing, drop-in alternative analysis, and practical design notes not found on the manufacturer datasheet, helping engineers select, source, and qualify the ADS1220IRVAR for production.
ADS122C04IRTER - 24-bit 2kSPS 4-ch Delta-Sigma ADC | Texas Instruments
The Texas Instruments ADS122C04IRTER is a precision 24-bit, 2-kSPS, 4-channel, low-power delta-sigma analog-to-digital converter housed in a 16-pin WQFN (3x3 mm) package. It integrates a low-noise programmable gain amplifier (PGA) with gains from 1 to 128, a low-drift internal voltage reference, two programmable excitation current sources (IDACs), an input multiplexer supporting two differential or four single-ended inputs, and an I2C-compatible interface capable of up to 1 Mbps. The device operates from a wide 2.3 V to 5.5 V supply and consumes only 315 uA (typical) in normal conversion mode. What is a delta-sigma ADC? A delta-sigma (sigma-delta) analog-to-digital converter is a type of data converter that uses a modulator loop and digital filtering to achieve very high resolution at lower sample rates, making it the dominant architecture for precision measurement of slowly varying sensor signals. Within the ADC taxonomy, it sits at: ADC > delta-sigma ADC > precision ADC > data converter > signal chain IC > semiconductor. The ADS122C04 specifically belongs to TI's precision, low-power ADC portfolio targeting bridge sensors, thermocouples, RTDs, and thermistors. Key differentiating features include 20 bits of effective resolution (noise-free bits depend on data rate and gain), simultaneous 50-Hz and 60-Hz line-cycle rejection, a 2.3-V to 5.6-V analog and digital supply range, and an extended -40C to +125C operating temperature range. The integrated IDACs simplify ratiometric measurements and can supply bias to resistive bridge sensors directly, eliminating external excitation circuitry. The device uses a switched-capacitor modulator with a digital SINC filter that delivers low total unadjusted error and excellent linearity, while two IDAC outputs are user-programmable from 10 uA to 1.5 mA. Two address pins allow up to 16 unique I2C addresses on a single bus, simplifying multi-channel PCB designs. Typical applications include weigh scales, strain-gauge sensor signal conditioning, industrial process control, temperature measurement with thermocouples or RTDs, and portable instrumentation. The integrated PGA and reference make the ADS122C04IRTER particularly well suited to direct bridge-sensor connection without front-end op-amps. Design consideration: the device's input multiplexer supports both bipolar (differential) and unipolar inputs; for thermocouples use the internal cold-junction compensation path and a separate dedicated temperature sensor. This page synthesizes distributor pricing from October 2026, parametric cross-reference data, and practical design notes that are not found in the standalone manufacturer datasheet.
ADS1230IPW - 20-Bit, 80 SPS Bridge ADC | Texas Instruments
Texas Instruments ADS1230IPW is a 20-bit, single-channel delta-sigma analog-to-digital converter optimized for resistive bridge sensors, with a maximum conversion rate of 80 samples per second in a 16-pin TSSOP package. It integrates a low-noise programmable gain amplifier, an onboard oscillator, and a precision 20-bit conversion stage. A delta-sigma ADC is a class of analog-to-digital converter that uses continuous-time sampling, noise shaping, and digital filtering to provide high resolution and excellent rejection of out-of-band noise. In the signal-chain hierarchy, the ADS1230 belongs to the ADC/DAC category and integrates functions commonly implemented separately around a precision converter, including a low-noise PGA, internal clock source, and bridge-sensor front end. The converter provides programmable gains of 1, 2, 64, and 128, allowing small differential bridge outputs to be amplified before digitization. Its 20-bit conversion resolution, 80 SPS maximum data rate, and 5 V supply operation make it suitable for precision measurement systems rather than high-speed waveform acquisition. A stated linearity error of 0.001% supports accurate measurement in weigh scales, strain-gauge systems, and pressure sensors. Because the ADS1230 uses a delta-sigma architecture, resolution and conversion speed are intentionally traded against one another. The integrated PGA reduces the number of external analog amplification stages required, while the onboard oscillator removes the need for an external clock in many bridge-sensor designs. The result is a compact analog measurement front end with fewer external components and less opportunity for low-level signal-chain errors. Typical uses include industrial weighing platforms, force and load measurement, resistive pressure transducers, strain-gauge conditioning, and laboratory instrumentation. In these applications, the differential input architecture suits a Wheatstone bridge, while programmable gain accommodates changes in excitation level and sensor sensitivity. Systems requiring hundreds or thousands of conversions per second should select a faster delta-sigma or SAR converter instead. PCB design should keep the bridge inputs, reference connection, and ground return paths compact and away from switching nodes. Use a low-noise reference source and appropriate input filtering, and observe the datasheet recommendations for bypass capacitance and exposed analog grounding. The external reference and excitation arrangement directly influence the absolute accuracy of the complete measurement chain. This page combines manufacturer specifications, pin and package guidance, application-focused engineering notes, and a parameter comparison intended to simplify ADS1230IPW selection. It also distinguishes exact drop-in opportunities from devices that share a package but require different firmware, sampling rates, interfaces, or analog front-end configurations.
ADS1231ID - 24-Bit Bridge Sensor ADC | Texas Instruments
The Texas Instruments ADS1231ID is a precision 24-bit analog-to-digital converter designed for bridge sensor measurement, with one input channel and a third-order delta-sigma modulator. It integrates a low-noise amplifier, an onboard oscillator, and a bridge power switch in a 16-pin SOIC package. The integrated amplifier provides a gain of 128, while the one-channel architecture is tailored to single-element strain-gauge, load-cell, and weighing applications. An analog-to-digital converter is an electronic component that converts a continuous analog voltage into a numeric value. Delta-sigma ADCs are a subtype of voltage-mode ADCs that use oversampling, digital filtering, and noise shaping to obtain high resolution and excellent noise performance. Within the broader semiconductor hierarchy, the ADS1231 belongs to the data-converter IC category and combines signal conditioning, conversion, and bridge excitation in one device. The ADS1231's principal advantages include 24-bit resolution, one differential measurement channel, integrated low-noise amplification, and a programmable bridge power switch. Integrating these functions reduces the number of external signal-conditioning components required around a bridge sensor. The onboard oscillator also removes the need for a separate clock source, simplifying the analog front end while supporting compact measurement systems. Technically, the converter uses a precision third-order 24-bit delta-sigma modulator. Its signal chain is designed for low-level sensor outputs where resolution and noise performance are more important than conversion speed. The integrated bridge power switch allows the converter to control excitation of the bridge sensor, helping coordinate sensor power and measurement settling. Because the device is optimized for a bridge front end, it provides a more integrated solution than a general-purpose low-speed ADC. Typical uses include digital weighing scales, industrial strain-gauge instruments, portable force measurement, pressure-monitoring systems, and laboratory sensor interfaces. In a weigh-scale design, the bridge output is applied to the ADC input while the converter handles excitation, amplification, and digitization. The 24-bit resolution supports fine resolution from small differential signals, although the complete system also depends on excitation voltage, front-end filtering, mechanical stability, and calibration. When implementing the circuit, follow the pin-description table and recommended application circuit in the manufacturer datasheet. Pay particular attention to input filtering, reference selection, digital-interface timing, and the settling period after changing data rate or amplifier settings. The 16-pin SOIC footprint also requires adequate copper and thermal consideration when the bridge supply dissipation is substantial. This product page combines the manufacturer architecture description with package information, sourcing guidance, application-focused design notes, and a pin-compatible cross-reference assessment. It is intended to help engineers distinguish the ADS1231ID from packaging-only orderable variants and confirm whether an existing bridge-measurement board can be reused without a layout change.
ADS1240E - 24-Bit, 4-Channel Delta-Sigma ADC | TI
Texas Instruments ADS1240E is a 24-bit, four-channel delta-sigma analog-to-digital converter rated for 30 samples per second, operating from 2.7 V to 5.25 V in a 24-SSOP package. It combines a programmable-gain amplifier, four analog inputs, an SPI-compatible serial interface, and eight configurable GPIO pins for precision measurement systems. A delta-sigma ADC is a data-converter category that uses oversampling, noise shaping, and digital filtering to obtain high resolution from low-frequency or near-DC signals. The ADS1240E belongs to the broader ADC > delta-sigma ADC > precision data-converter hierarchy and is designed for sensors whose useful bandwidth is much lower than the converter's sampling capability. Its 24-bit no-missing-code operation and 21-bit effective resolution support accurate measurement of small signals from bridges, strain gauges, thermocouples, and industrial transducers. Key features include programmable PGA gains from 1 through 128, 0.0015% integral nonlinearity, and simultaneous 50 Hz and 60 Hz rejection of at least 90 dB. Single-cycle settling helps reduce the time required to establish each conversion result. The SPI-compatible serial interface and up to eight configurable I/O pins simplify connection to microcontrollers, programmable logic, and dedicated industrial controllers while supporting alarm, excitation, and digital control functions. The converter uses a delta-sigma architecture to trade conversion speed for resolution and noise performance. At a 30-SPS data rate, the architecture is appropriate for slow sensor signals rather than waveform sampling. The programmable PGA accepts low-level inputs while reducing the signal range that must be resolved by the converter. Select the gain, data rate, digital filter configuration, and input reference according to the sensor output range, common-mode voltage, required update rate, and rejection of line-frequency interference. Typical uses include smart transmitters, industrial process-control loops, electronic weight scales, chromatography systems, portable instrumentation, pressure measurement, and low-level bridge excitation. The four-input architecture allows multiple sensor channels to share the converter when each can meet the settling time, common-mode range, and filtering requirements of the selected configuration. For layout, keep analog input and reference traces short, place input filtering and decoupling capacitors close to their associated pins, and use a quiet ground return for the converter. A solid ground plane and separation from switching nodes reduce coupling into the high-resolution front end. Verify the reference voltage, common-mode limits, input filtering, and digital interface timing before committing the PCB layout. This product record combines manufacturer specifications with practical guidance for sensor measurement design, application selection, interface planning, and replacement evaluation. It also identifies same-footprint alternatives and clearly distinguishes drop-in options from devices that would require a different package or redesigned analog interface.
ADS1241E - 24-Bit 30-SPS 8-Channel ADC | Texas Instruments
Texas Instruments ADS1241E is a 24-bit, 30-SPS, 8-channel delta-sigma analog-to-digital converter with a programmable gain amplifier in a 28-pin SSOP package. It combines high-resolution conversion, multiple analog inputs, and an SPI-compatible serial interface for precision measurement systems. The manufacturer identifies the ADS1241 and ADS1241E for smart transmitters, industrial process control, weight scales, chromatography, and portable instrumentation. A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling and digital filtering to convert continuously varying analog voltages into high-resolution digital codes. Within the broader semiconductor hierarchy, the ADS1241E is an ADC, then a data-converter IC, then an integrated circuit used for precision signal acquisition. Its 24-bit resolution and 30-SPS conversion rate target applications that need accurate measurement without exceptionally high sample throughput. The ADS1241E provides eight analog input channels, a programmable gain amplifier, and an SPI-compatible serial interface. The PGA supports conditioning of low-level sensor signals before conversion, while the 24-bit converter architecture is intended to preserve fine measurement detail. According to the Texas Instruments product page, up to eight bits of data I/O can also be supplied for input or output, expanding its usefulness for hardware control functions beyond primary data acquisition. The 28-pin SSOP package suits compact industrial and instrumentation boards where analog input density matters more than the footprint of a high-lead-count package. The verified distributor listing identifies the ADC as a 24-bit, eight-input, single sigma-delta converter, while the manufacturer describes the family as a 24-bit, 30-SPS, eight-channel device with a PGA. The operating temperature range reported by the LCSC listing is -40°C to +85°C. Typical implementation places the ADS1241E between sensors or conditioning networks and a digital controller. Suitable systems include smart transmitters, process-control instrumentation, precision weighing equipment, chromatography data acquisition, and portable measurement products. SPI-compatible communication allows the converter to connect to a microcontroller while keeping the analog front end isolated from the digital control section. Designers should verify the complete electrical limits, pin functions, recommended application circuit, reference requirements, and digital-interface timing in the manufacturer datasheet before layout. Component placement, analog grounding, reference-voltage stability, and filtering directly affect a precision ADC, so the verified 24-bit resolution should not be treated as useful system accuracy without a complete error budget. This page distinguishes documented capabilities from parameters that still require detailed datasheet review.
ADS1245IDGSR - 24-Bit Delta-Sigma ADC, MSOP-10 | Texas Instruments
The Texas Instruments ADS1245IDGSR is a 24-bit, ultra-low-power delta-sigma analog-to-digital converter (ADC) with a high-impedance buffered input, housed in a 10-pin MSOP (DGS) package. Its buffered input presents 3 GΩ of input impedance, minimizing measurement errors when paired with high-impedance signal sources. The device operates from analog supplies of 2.5 V to 5.25 V and digital supplies of 1.8 V to 3.6 V, consuming only a few milliwatts in active conversion. What is a delta-sigma ADC? A delta-sigma (ΣΔ) ADC is a converter architecture that uses oversampling and noise-shaping to deliver very high effective resolution at low-to-moderate sampling rates. It belongs to the broader class of ADCs (SAR, pipeline, dual-slope, ΣΔ) used wherever precision DC measurements are required. Within the power-management and signal-chain hierarchy, the ADS1245IDGSR sits between a low-impedance analog sensor bridge and a microcontroller's serial interface, providing digital-free-of-low-frequency-noise conversion. Key features include 20-bit effective resolution, ±2.5 V differential input range, simultaneous 50 Hz and 60 Hz line-noise rejection, simple two-wire serial interface, and pin-compatibility with the ADS1244. The ADS1245 offers 0.0006% (typical) and 0.0015% (maximum) integral nonlinearity (INL), supporting demanding measurement accuracy requirements. The architecture is built around a third-order delta-sigma modulator followed by a digital filter that performs simultaneous 50 Hz/60 Hz mains rejection at the appropriate output data rates. The buffered input simplifies front-end signal conditioning by eliminating the need for external op-amps when interfacing directly to high-impedance sensors such as strain gauges, thermocouples, or electrochemical cells. Typical applications include precision temperature and pressure measurement, portable industrial weighing scales, weighing scales and load-cell conditioning, and process control instrumentation. The wide supply range also supports battery-powered handheld meters and 4-20 mA loop-powered industrial transmitters. When designing with this device, place the input bypass capacitors as close to the AVDD/DVDD pins as possible and avoid routing the analog signals near the digital serial clock lines, because even high-PSRR ADCs can couple switching transients into the analog front-end. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select and qualify the part rapidly.
ADS1246IPW - 24-Bit 2kSPS Precision ADC | Texas Instruments
The Texas Instruments ADS1246IPW is a 24-bit, 2kSPS, single-channel delta-sigma analog-to-digital converter with an integrated programmable gain amplifier for precision sensor measurement. It operates from a 2.7 V to 5.25 V supply and is packaged in a 16-pin TSSOP package. The device supports SPI communication and an operating temperature range of -40 °C to 105 °C. A delta-sigma ADC is a precision data-converter category that uses oversampling, noise shaping, and digital filtering to convert an analog input into a high-resolution digital result. It belongs to the ADC hierarchy within analog and mixed-signal semiconductors. Compared with many high-speed flash and SAR converters, a delta-sigma architecture is especially useful when low noise, high resolution, and effective input filtering matter more than rapid transient acquisition. The ADS1246 integrates several signal-chain functions. Its programmable gain amplifier conditions low-level sensor signals before conversion, while the 24-bit conversion core supports precision measurement of bridge sensors, temperature sensors, pressure transducers, and other analog sources. Its 2kSPS maximum conversion rate is suitable for continuous monitoring rather than high-bandwidth waveform capture. The SPI interface supports digital configuration and data transfer, and the internal oscillator supports operation without an external clock source. The single-cycle settling digital filter helps suppress out-of-band noise and reduces the need for extensive analog filtering. The integrated PGA reduces the need for a separate gain stage in many sensor interfaces, which can simplify board layout and lower component count. However, the ADC’s resolution and conversion rate do not alone determine system accuracy; sensor excitation, reference stability, input noise, grounding, and PCB layout remain important contributors to final measurement performance. Typical uses include industrial process monitoring, thermocouple and RTD systems, load-cell and strain-gauge instrumentation, pressure sensing, portable measurement equipment, and embedded data acquisition. The 16-pin TSSOP package is compact enough for mixed-signal control boards while providing dedicated digital and analog interfaces suitable for precision measurement front ends. When laying out the circuit, place the analog input, reference, and decoupling connections close to the device and keep digital switching nodes away from sensitive sensor traces. Use a clean, stable reference network and follow the manufacturer’s recommended capacitor values. Confirm the complete pin assignment and exposed-pad requirements against the ADS1246 datasheet before releasing the PCB layout. This page combines the official device specifications, package and temperature information, practical sensor-measurement guidance, and a qualified drop-in comparison. It also distinguishes genuine pin-compatible alternatives from related converters that require different packages or redesigned layouts.
ADS1250U - 20-Bit, 25 kSPS Sigma-Delta ADC | Texas Instruments
Texas Instruments ADS1250U is a 20-bit, single-channel, delta-sigma analog-to-digital converter with a maximum data rate of 25 kSPS, an effective resolution of 18 bits, and a 16-pin SOIC (DW) package. It operates from a single +5 V supply and uses a serial interface for transferring converted data. An analog-to-digital converter converts an analog input voltage into a digital value suitable for measurement, control, and signal-processing systems. The ADS1250U belongs to the delta-sigma ADC hierarchy within data-converter ICs. Its delta-sigma architecture is intended for precision measurement applications requiring wide dynamic range, high resolution, and effective conversion rates up to 25 kSPS without missing output codes under the stated operating conditions. The primary performance features are 20-bit nominal resolution, 18-bit effective resolution, and 2.8 ppm RMS noise at conversion rates up to 25 kSPS. The device supports one analog input and provides a broad dynamic range for precision acquisition systems. Its single +5 V supply requirement simplifies system-level power planning compared with converters that require separate analog and digital rails. The converter combines an input stage, delta-sigma modulator, digital filter, and serial data interface within one integrated circuit. Digital filtering suppresses out-of-band noise and shapes the frequency response, while the serial interface reduces the number of signal connections required compared with a parallel ADC. Conversion rate, data readiness, and operating mode are managed through the device interface, allowing the acquisition system to balance measurement speed against resolution and filtering requirements. Typical uses include precision industrial instrumentation, pressure and load-cell measurement, low-level sensor acquisition, laboratory data logging, and embedded measurement systems. It is especially appropriate when 20-bit conversion resolution is useful but a high-speed SAR ADC is unnecessary. The 25 kSPS ceiling also allows the converter to handle slowly changing sensor outputs and multiplexed analog channels when the required settling time permits. A critical design consideration is analog signal conditioning. The ADC performance depends on a low-noise reference, properly decoupled supply rails, controlled grounding, and an input source capable of driving the selected conversion rate. Follow the pin-description and application-circuit tables in the manufacturer datasheet when assigning tracks, selecting bypass capacitors, and establishing the digital interface. This page combines the Texas Instruments product characteristics, package information, sourcing context, and practical selection guidance. It also distinguishes true same-footprint alternatives from broader ADC options so engineers can identify when a board-level replacement is technically defensible.
ADS1251U - 24-Bit 20kHz Low-Power Delta-Sigma ADC | Texas Instruments
The Texas Instruments ADS1251U is a 24-bit, 20kHz low-power delta-sigma analog-to-digital converter with one differential input, 19-bit effective resolution, and a single +5V supply. The converter is housed in an 8-pin SOIC package and is designed for precision measurement systems requiring high resolution, wide dynamic range, and no missing-code performance. An analog-to-digital converter converts an analog input voltage into a digital value. Delta-sigma ADCs belong to the broader semiconductor and data-converter hierarchy, combining an analog input stage, sigma-delta modulator, digital filter, and serial interface. The ADS1251U adds differential input capability, which helps reject common-mode interference when measuring small sensor signals referenced to a shared analog ground. The device provides 24-bit resolution with no missing codes and achieves 19-bit effective resolution at conversion rates up to 20kHz. Its stated noise performance is 1.5ppm RMS, while the input nonlinearity is 15ppm maximum. An external 5V reference supports accurate ratio measurements, and a flexible two-wire synchronous serial interface is suitable for low-cost isolation and communication with microcontrollers. The delta-sigma architecture prioritizes resolution and noise performance over conversion latency. Filtering, decimation, and programmable data rates make the ADS1251U appropriate for precision instrumentation rather than high-bandwidth waveform capture. The SYNC and power-down functions provide additional control for synchronized acquisition and low-duty-cycle systems. Typical uses include industrial pressure and temperature acquisition, precision bridge measurement, low-frequency sensor interfaces, and isolated instrumentation. The differential input can be connected to the output of suitable bridge or sensor circuitry, while the digital interface communicates conversion results to an embedded controller. Designers should provide a stable 5V reference, verify the analog input range around the selected reference voltage, and account for digital-filter settling time after changing data rate or synchronization conditions. Reference and analog-ground layout should minimize thermal gradients and coupling from switching circuitry. This page combines the verified manufacturer and distributor specifications with pinout guidance, commercial availability information, compatible-family alternatives, and practical design notes. It is intended to help engineers identify the correct ADC, validate electrical compatibility, and plan a precise, low-noise measurement implementation.
ADS1252U - 24-Bit 40kHz Sigma-Delta ADC | Texas Instruments
Texas Instruments ADS1252U is a 24-bit, 40 kSPS sigma-delta analog-to-digital converter with one differential input, operated from a single +5 V supply and housed in an 8-pin SOIC package. The converter provides wide dynamic range and no-missing-code performance, with an effective resolution of 19 bits, equivalent to 2.5 ppm RMS noise, for conversion rates up to 40 kHz. Its precision architecture is intended for measurement systems that require high resolution without the complexity and switching noise of a high-speed SAR ADC. What is a sigma-delta ADC? A sigma-delta analog-to-digital converter uses a delta-sigma modulator and digital decimation filtering to oversample the analog input and shape quantization noise. The ADS1252U is therefore a precision ADC in the broader semiconductor hierarchy: data converter > analog-to-digital converter > sigma-delta ADC. Its 24-bit nominal resolution, 19-bit effective resolution and differential input support are useful for low-bandwidth industrial instrumentation where signal amplitude and resolution matter more than maximum sampling rate. Key features include 24-bit resolution, operation up to 40 kHz, one differential input and a single +5 V supply. The manufacturer describes the device as providing no missing codes across its 24-bit conversion range, while the 2.5 ppm RMS noise specification identifies it as a high-resolution measurement converter rather than a general-purpose flash or SAR ADC. The SPI-compatible serial interface and external clock arrangement provide a straightforward connection to microcontrollers, DSPs and programmable logic. The ADS1252U is suited to precision current sensing, pressure transducer acquisition, strain-gauge measurement, industrial process monitoring and low-frequency sensor instrumentation. Differential input handling helps reject common-mode noise when the measured source is balanced or when the analog front end uses a differential amplifier. The 40 kSPS maximum conversion rate is appropriate for many industrial control and monitoring loops, but it is not intended for high-frequency waveform capture. Designers should pay close attention to analog input common-mode range, reference voltage, input filtering, clock jitter and layout grounding. The analog and digital sections should be separated thoughtfully, and the datasheet reference and bypass connections should be placed according to the manufacturer layout guidance. External filtering can limit bandwidth and reduce out-of-band delta-sigma modulation noise before the digital decimation stage. This product page consolidates the verified manufacturer specifications, observed distributor pricing, sourcing information and practical design guidance. It also distinguishes the confirmed ADS1252U ordering information from broader functional alternatives, helping engineers avoid treating a merely similar ADC as a guaranteed pin-to-pin replacement.