Amplifier ICs
بەرهەمەکان (3,200+)
AD811SQ/883B - 120MHz Video Op Amp | Analog Devices | 8-CERDIP
The AD811SQ/883B is a high-performance video operational amplifier from Analog Devices, designed for broadcast-quality video systems. It features a -3 dB bandwidth of 120 MHz at a gain of +2, with differential gain and phase of 0.01% and 0.01° (RL = 150 Ω). The device is packaged in an 8-pin CERDIP (SQ) package and is qualified to MIL-STD-883 Class B, making it suitable for military and aerospace applications. A video operational amplifier is a type of op amp optimized for processing video signals, providing wide bandwidth, high slew rate, and low differential gain/phase errors. It is a subset of operational amplifiers, which are fundamental building blocks in analog signal processing. The AD811SQ/883B belongs to the category of current feedback amplifiers, which offer superior slew rate and bandwidth at higher gains compared to voltage feedback amplifiers. Key features include a 0.1 dB gain flatness to 35 MHz (G = +2), a slew rate of 2500 V/μs, and a supply current of 16.5 mA. The device operates from dual supplies of ±4.5 V to ±18 V, with an output current of 100 mA. Its high bandwidth and low distortion make it ideal for video distribution, cable drivers, and professional video equipment. The AD811SQ/883B uses a current feedback architecture, which provides excellent large-signal bandwidth and fast settling time. The device is designed to drive 150 Ω loads, typical for video cables, and maintains low differential gain and phase errors, ensuring accurate color reproduction in video signals. The MIL-STD-883B qualification ensures high reliability in harsh environments. Typical applications include video line drivers, RGB distribution amplifiers, and professional video cameras. The device is also used in military avionics displays and radar systems where high-speed analog signal processing is required. Its wide supply range and robust design make it suitable for both commercial and military-grade equipment. When designing with the AD811SQ/883B, ensure proper power supply decoupling with 0.1 μF ceramic capacitors close to the supply pins. The device's high bandwidth requires careful PCB layout to minimize parasitic capacitance and inductance, which can degrade performance. Additionally, the output stage can drive capacitive loads, but a series resistor may be needed to maintain stability.
AD815AY - 500mA High-Speed Differential Driver | Analog Devices
Analog Devices AD815AY is a dual high-speed differential line driver capable of supplying a minimum of 500 mA per amplifier, with a 24-lead SOIC package. It can operate as a differential output driver or as two single-ended drivers, supports 40 V p-p differential output on ±15 V supplies, and provides a bandwidth of 120 MHz. Its combination of high output current, low distortion, and flexible configuration makes it suitable for professional video, communications, and test-equipment signal chains. A high-speed differential driver is a high-output-current amplifier stage used to transmit balanced signals through cables, transformers, or terminated analog lines. The AD815 family belongs to the broader hierarchy of differential amplifiers, line drivers, interface ICs, and analog semiconductors. Differential operation rejects common-mode noise, reduces radiated interference, and allows two signal polarities to be transmitted over one balanced connection when paired with a suitable receiver. The AD815AY provides flexible configuration as either one differential driver or two independent single-ended drivers. According to the Analog Devices AD815 datasheet, each amplifier can supply at least 500 mA, with a minimum output drive of 400 mA per amplifier into a 10 Ω load. Differential output can reach 40 V p-p when powered from ±15 V supplies, while a coupling transformer with a turns ratio greater than 1:1 can support still higher output swing. Signal-integrity performance is a defining feature of this device. The datasheet specifies low distortion of −66 dB at 1 MHz into a 200 Ω load with a 40 V p-p output, 120 MHz high-speed operation, and differential gain and phase matching of 0.05% and 0.45° into a 25 Ω load. These characteristics support accurate transmission of wideband analog signals without relying on an output stage built from separate discrete amplifiers. Typical uses include analog video distribution, balanced communications, instrumentation, professional audio and video equipment, and high-current line-driving circuits. In a terminated video system, the AD815AY can drive back-terminated loads while preserving low distortion. Its current capability also makes it useful where a conventional low-power operational amplifier cannot drive the required load directly. Layout and power-supply design are critical because high-speed, high-current outputs can expose trace resistance and supply impedance to amplifier gain. Keep output routing short, use low-inductance power connections, decouple each supply rail close to the device, and follow the pin assignments and output-load requirements in the manufacturer datasheet. Confirm thermal performance when operating continuously at maximum output current. This product page combines manufacturer specifications, verified distribution data, drop-in-family comparison, and practical implementation guidance. The AD815AY should be selected specifically for high-current, high-speed balanced-output requirements, while a lower-current amplifier remains preferable when the load does not demand the AD815's drive capability.
AD816AY - 500mA Differential Driver | Analog Devices | Telecom
The Analog Devices AD816AY is a 500 mA differential line driver and dual low-noise voltage-feedback amplifier with 120 MHz bandwidth, housed in a 15-lead plastic SIP package. It combines two high-current driver sections with two low-noise amplifier sections for high-frequency telecommunications equipment, including subscriber-line interfaces. A differential line driver is a high-speed output-stage device that converts a low-voltage differential signal into a larger voltage swing across a balanced load. The AD816AY belongs to the amplifier hierarchy as a special-purpose line transceiver and combines differential drive capability with two low-noise voltage-feedback amplifiers. Its industrial temperature range allows operation from -40°C to +85°C, while thermal overload protection improves system reliability during overload conditions. The principal performance characteristics are 120 MHz small-signal bandwidth, 1,500 V/µs differential slew rate, and total harmonic distortion of -68 dB at 1 MHz into a 100 Ω load. These figures make the device suitable for demanding signal-chain paths where broad bandwidth, fast edge response, low waveform distortion, and substantial output-current capability are required. The integrated dual amplifier section also provides flexibility for receiver-side or intermediate signal-conditioning functions. The AD816AY uses a high-current differential output architecture rather than the low-drive-current architecture of a conventional operational amplifier. The 500 mA output-current rating supports higher-amplitude loads than general-purpose amplifiers, while the 120 MHz bandwidth preserves signal amplitude and phase relationships at high frequencies. Thermal overload protection is included to help maintain reliability, although correct heat dissipation and output-stage stability remain important layout considerations. Typical uses include telecommunication subscriber-line circuits, balanced line interfaces, high-frequency signal-conditioning paths, communications test equipment, and industrial driver stages. In a subscriber-line application, the differential driver can energize a balanced network while the two low-noise amplifiers handle portions of the receive or intermediate signal path. The 1,500 V/µs slew rate supports fast transitions, and the -68 dB distortion specification quantifies performance when driving 100 Ω at 1 MHz. PCB design should provide a continuous return path, decouple nearby supply rails, and keep sensitive feedback and signal traces away from high-current output nodes. Because the AD816AY combines wideband drive with substantial output current, thermal performance depends on the load, frequency, supply voltage, copper area, and nearby thermal obstacles. Check the manufacturer pin-description table and recommended operating area before assigning tracks or selecting external protection components. This page adds a parameter-focused comparison, application guidance, design notes, and sourcing support around the AD816AY datasheet. The analysis highlights where the 120 MHz bandwidth, 1,500 V/µs slew rate, 500 mA drive capability, and 15-lead package influence circuit selection, layout, and thermal design.
AD820ARZ - Single-Supply FET Op Amp | Analog Devices
The AD820ARZ is a precision, low power, FET input operational amplifier from Analog Devices, offered in an 8-lead SOIC package. It operates from a single supply of 5 V to 36 V or dual supplies of ±2.5 V to ±18 V, with true single-supply capability and an input voltage range extending below the negative rail. This rail-to-rail output amplifier delivers a gain bandwidth of 1.9 MHz and a slew rate of 3 V/µs, making it suitable for a wide range of precision analog applications. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used in signal conditioning, filtering, and mathematical operations. The AD820 belongs to the FET-input op amp family, which uses junction field-effect transistors (JFETs) at the input stage to achieve very high input impedance and low input bias current. This makes it ideal for interfacing with high-impedance sensors and sources without loading them. As a rail-to-rail output device, it can swing its output close to both supply rails, maximizing dynamic range in single-supply systems. Key features of the AD820ARZ include a low input bias current of 2 pA (typical), low offset voltage of 100 µV (typical), and a supply current of 700 µA per amplifier. It also features a wide input common-mode range that includes the negative rail, enabling it to sense signals near ground in single-supply operation. The device is specified over the industrial temperature range of -40°C to +85°C and is RoHS compliant. Technically, the AD820 uses a precision bipolar/JFET process, combining the low noise and high speed of bipolar transistors with the high input impedance of JFETs. The output stage is a rail-to-rail class AB design that provides low distortion and high output drive capability. The amplifier is internally compensated for unity-gain stability, simplifying its use in buffer and follower configurations. Typical applications include battery-powered instrumentation, portable medical devices, sensor signal conditioning, and active filters. Its low power consumption and wide supply range make it particularly suited for portable and industrial equipment where power efficiency and signal integrity are critical. When designing with the AD820ARZ, ensure proper decoupling of the supply pins with 0.1 µF ceramic capacitors placed close to the device. For best performance, avoid routing high-impedance inputs near noisy traces, and consider using a ground plane to minimize noise pickup.
AD8221ARZ - Precision Instrumentation Amplifier | Analog Devices
The AD8221ARZ is a precision instrumentation amplifier from Analog Devices, offering the industry's highest common-mode rejection ratio (CMRR) over frequency in its class. It is a gain-programmable, high-performance amplifier that maintains excellent CMRR beyond 200 Hz, where competing instrumentation amplifiers typically degrade. The device is available in an 8-lead SOIC package and operates over a wide supply range, making it suitable for a variety of precision measurement applications. An instrumentation amplifier is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is characterized by high input impedance, low offset voltage, and high CMRR, making it ideal for precise sensor signal conditioning. Instrumentation amplifiers are a subset of operational amplifiers, which are fundamental building blocks in analog signal processing, and they are widely used in medical, industrial, and automotive applications. Key features of the AD8221ARZ include a low input offset voltage of 60 µV, a low input bias current of 500 pA, and a bandwidth of 825 kHz. The device also offers a slew rate of 2 V/µs, ensuring fast response in dynamic measurement systems. The gain is set by a single external resistor, allowing flexible configuration from 1 to 1000. The high CMRR of 90 dB at 60 Hz (minimum) and 80 dB at 10 kHz (minimum) ensures accurate rejection of power-line interference and high-frequency noise. The AD8221ARZ is designed with a three-op-amp architecture, providing excellent DC and AC performance. The input stage uses super-beta transistors to achieve low bias current, while the output stage drives loads up to 10 kΩ. The device operates from a single supply of 4.5 V to 36 V or dual supplies of ±2.25 V to ±18 V, with a quiescent current of 1.2 mA. The wide supply range and low power consumption make it suitable for battery-powered and industrial applications. Typical applications include medical instrumentation (ECG, EEG), industrial process control, bridge amplifiers, and data acquisition systems. The AD8221ARZ is also used in precision sensor interfaces, where its low offset and high CMRR are critical for accurate measurements. Its small SOIC package and surface-mount design enable compact PCB layouts. When designing with the AD8221ARZ, ensure proper grounding and decoupling to maintain high CMRR. Use a 0.1 µF capacitor close to the supply pins and a 10 µF tantalum capacitor for low-frequency decoupling. The reference pin (pin 5) can be used to level-shift the output, which is useful in single-supply applications.
AD8223ARZ - Single-Supply Instrumentation Amplifier | Analog Devices
The AD8223ARZ is a single-supply, low-cost instrumentation amplifier from Analog Devices, designed for precision signal conditioning in medical and industrial applications. It operates from a single supply of +3.0 V to +25 V (or dual supplies of ±1.5 V to ±12.5 V) and delivers rail-to-rail output swing. The device is available in an 8-lead SOIC package (8-SOIC, 0.154" width) and conforms to the industry-standard 8-lead pinout configuration. An instrumentation amplifier (in-amp) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is characterized by high input impedance, high common-mode rejection ratio (CMRR), and low offset voltage, making it ideal for precise measurement of small signals in the presence of large common-mode noise. In the signal chain hierarchy, an instrumentation amplifier is a specialized operational amplifier (op-amp) configuration, often used as the front-end of data acquisition systems, sensor interfaces, and medical monitoring equipment. Key features of the AD8223ARZ include a gain set by a single external resistor, with a default gain of 5 when no resistor is used. The gain can be programmed from 5 to 1000, providing flexibility for various sensor outputs. The device offers a bandwidth of 200 kHz at gain of 5, and a low input offset voltage of 50 µV (max). It also features a high CMRR of 90 dB (min) at gain of 10, ensuring excellent rejection of common-mode interference. The rail-to-rail output swing allows maximum dynamic range in single-supply applications. Technically, the AD8223 uses a classic three-op-amp instrumentation amplifier architecture, but optimized for single-supply operation. The input stage provides high impedance and low bias current, while the output stage delivers rail-to-rail swing. The device is laser-trimmed for low offset and drift, ensuring accuracy over temperature. It operates over the industrial temperature range of -40°C to +85°C, making it suitable for harsh environments. Typical applications include medical instrumentation (ECG, EEG, blood pressure monitors), industrial process control (pressure, temperature, and strain gauge sensors), and precision data acquisition systems. The single-supply capability and low cost make it an attractive choice for battery-powered and portable devices. When designing with the AD8223ARZ, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors placed close to the device. The reference pin (pin 5) can be used to level-shift the output, allowing the amplifier to interface with ADCs that have a specific input range. For best performance, use precision resistors for the gain-setting resistor to maintain gain accuracy.
AD8223BRMZ - Single-Supply Rail-to-Rail INA, 200kHz | Analog Devices
The Analog Devices AD8223BRMZ is a single-supply, rail-to-rail output instrumentation amplifier (INA) housed in an 8-pin MSOP package with a 200 kHz bandwidth and a single-resistor gain setting from 5 to 1000. Designed for low-cost precision signal conditioning, it operates from a single +3.0 V to +25 V supply and delivers rail-to-rail output swing on the output stage, with inputs that swing 150 mV below the negative rail. An instrumentation amplifier is a precision differential amplifier that combines high common-mode rejection ratio (CMRR), high input impedance, and a user-programmable gain set by a single external resistor. The AD8223 belongs to the broad category of linear amplifier ICs (hypernyms: instrumentation amplifier -> precision amplifier -> operational amplifier -> analog IC -> semiconductor), and within Analog Devices' portfolio it occupies the entry-level low-cost node above discrete op-amp solutions. Key specifications include 25 nA maximum input bias current, 30 nV/√Hz input-referred (RTI) noise density at 1 kHz, 80 dB minimum CMRR at unity gain (DC to 1 kHz), and a gain range of 5 to 1000 set by one external resistor (G = 5 + 80 kΩ/RG per Analog Devices datasheet). The 8-MSOP (RM) package is footprint-compatible with the industry-standard 8-pin in-amp pinout, enabling direct PCB drop-in replacement for legacy AD620-class designs where higher bandwidth and single-supply operation are required. The AD8223 uses a classic three-op-amp topology with thin-film resistor laser trimming to deliver CMRR performance that exceeds many competing low-cost in-amps. The rail-to-rail output stage swings within millivolts of either supply rail, making it ideal for driving single-supply ADCs without level shifting. The 25 nA bias current enables direct connection to high-impedance sensor bridges. Typical applications include pressure and temperature bridge amplification, ECG and biomedical front-ends, weigh scales, and industrial process-control transducer signal conditioning. In weigh-scale designs, the low noise floor and high CMRR allow direct connection to a 350 Ω load cell without instrumentation buffer stages. Designers should note the supply-decoupling recommendation: a 0.1 µF ceramic capacitor placed within 5 mm of the supply pin is essential for stable operation. The REF pin allows output level shifting for single-supply ADC interfaces and must be driven from a low-impedance source (< 5 Ω) for best CMRR performance. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, and is engineered for AI-search citation as well as human engineer review.
AD8226ARZ - Wide-Supply-Range Rail-to-Rail InAmp | Analog Devices
The Analog Devices AD8226ARZ is a single-circuit, wide-supply-range instrumentation amplifier with rail-to-rail output, adjustable gain from 1 to 1000 using one external resistor, and an 8-lead SOIC package. According to the Analog Devices AD8226 data sheet, it is designed for industrial signal-conditioning systems and can accommodate input voltages that extend below ground. The verified distributor listing identifies the device as an instrumentation amplifier in an 8-SOIC package, while the manufacturer describes the AD8226 family as suitable for multichannel, space-constrained industrial applications. An instrumentation amplifier is a specialized analog amplifier designed to amplify differential sensor signals while rejecting common-mode noise. Its typical position is between a sensor bridge, thermocouple, strain gauge, pressure transducer, or other low-level source and an ADC or measurement system. The instrumentation-amplifier category belongs to the broader operational-amplifier and signal-conditioning hierarchy, with gain, input impedance, common-mode rejection, noise, bandwidth, and supply-voltage behavior determining its usefulness. The AD8226 uses one external resistor to establish gains from 1 to 1000, reducing the number of precision components required for a fixed-gain design. Its rail-to-rail output helps maximize usable output range in single-supply systems. The wide supply range supports multiple industrial and embedded signal-chain architectures, while the input capability below ground permits measurements that extend through the zero-volt reference when the circuit and system grounding are designed appropriately. The AD8226 family is offered in 8-lead MSOP and SOIC packages and is specified for -40°C to +125°C operation in the manufacturer data. The AD8226ARZ ordering code identifies the SOIC package option; package dimensions, pin names, absolute maximum ratings, and detailed electrical limits should be confirmed in the manufacturer data sheet before layout or replacement work. Typical uses include industrial multichannel measurement, bridge excitation and sensing, current-loop signal conditioning, data-acquisition front ends, sensor interfaces, and instrumentation systems. Because the AD8226 is an analog signal-chain device, PCB layout should prioritize short input paths, careful grounding, low-noise supply routing, and stable gain-resistor placement. When designing around the AD8226ARZ, verify the selected gain, supply voltages, input common-mode range, output swing, and bandwidth against the actual sensor signal. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, application guidance, and design considerations to support component selection and procurement.
AD8226BRZ - Wide Supply Range In-Amp | Analog Devices
The AD8226BRZ is a low cost, wide supply range instrumentation amplifier from Analog Devices, packaged in an 8-lead SOIC. It requires only one external resistor to set any gain between 1 and 1000, making it a versatile building block for precision signal conditioning. The device operates from a single supply of 2.2V to 36V or dual supplies of ±1.1V to ±18V, with rail-to-rail output swing. Its input voltage range extends below ground, allowing it to handle bipolar signals even with a single positive supply. An instrumentation amplifier (in-amp) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is characterized by high input impedance, low offset voltage, and high common-mode rejection ratio (CMRR), making it ideal for interfacing with sensors such as strain gauges, thermocouples, and bridge circuits. In the signal chain hierarchy, an in-amp sits between the sensor and the ADC, providing the necessary gain and buffering to condition small differential signals. Key features of the AD8226BRZ include a gain range of 1 to 1000 set by a single resistor, a wide supply range, rail-to-rail output, and a low quiescent current of 350 µA typical. It also offers a CMRR of 80 dB minimum at gain 1, and a bandwidth of 1.5 MHz at gain 1. The device is fully specified for operation from -40°C to +125°C, making it suitable for industrial and automotive environments. Technically, the AD8226 uses a three-op-amp topology with an integrated precision resistor network, providing excellent DC accuracy and stability. The gain-setting resistor is connected between the RG pins, and its value determines the gain according to the formula G = 1 + 49.4 kΩ / RG. The device features internal ESD protection and is available in both SOIC and MSOP packages. Typical applications include industrial process control, bridge amplifiers, medical instrumentation, and data acquisition systems. Its wide supply range and rail-to-rail output make it particularly suited for single-supply systems where headroom is limited. When designing with the AD8226BRZ, ensure that the reference pin (pin 5) is properly bypassed with a capacitor to ground to maintain stability. Also, keep the gain-setting resistor close to the RG pins to minimize parasitic capacitance and maintain accuracy.
AD8226BRZ-RL7 - Wide Supply Range In-Amp | Analog Devices
The AD8226BRZ-RL7 is a low cost, wide supply range instrumentation amplifier from Analog Devices that requires only one external resistor to set any gain between 1 and 1000. It is designed to work with a variety of signal voltages, featuring a wide input range and rail-to-rail output. The device operates from dual supplies of ±2.25 V to ±18 V or a single supply of 4.5 V to 36 V, making it versatile for both battery-powered and industrial applications. Housed in an 8-lead SOIC package (BRZ suffix), the AD8226BRZ-RL7 is supplied in tape and reel packaging for automated assembly. An instrumentation amplifier (in-amp) is a precision differential amplifier with high input impedance and high common-mode rejection, used to amplify small signals in the presence of large common-mode voltages. It is a key building block in precision analog signal chains, often following a sensor bridge or transducer, and preceding an ADC. The AD8226 belongs to the family of instrumentation amplifiers, which are a subset of operational amplifiers optimized for differential measurement. Key features of the AD8226 include a gain range of 1 to 1000 set by a single external resistor, rail-to-rail output swing, and a wide input voltage range that includes below ground. The device also offers excellent AC and DC performance, with a typical gain error of 0.1% (max) and gain drift of 10 ppm/°C (max). Quiescent current is only 350 µA (typical), making it suitable for low-power, battery-operated equipment. The AD8226 is specified over the extended industrial temperature range of -40°C to +125°C. Technically, the AD8226 uses a three-op-amp topology with a precision laser-trimmed resistor network, ensuring high accuracy and stability. The input stage provides high common-mode rejection, while the output stage delivers rail-to-rail swing. The device is fully specified for both single and dual supply operation, and its input range extends below the negative rail, allowing it to handle signals that go slightly below ground. Typical applications include industrial process control, bridge amplifiers, medical instrumentation, and data acquisition systems. The AD8226 is ideal for amplifying small differential signals from sensors such as strain gauges, thermocouples, and current shunt monitors. Its wide supply range and low power make it suitable for portable and battery-operated equipment. When designing with the AD8226, ensure that the reference pin is properly driven to set the output common-mode voltage, and use a precision resistor for gain setting to maintain accuracy. Bypass the supply pins with 0.1 µF ceramic capacitors close to the device to ensure stability.
AD8227ARZ - Wide Supply Range In-Amp | Analog Devices
The AD8227ARZ is a low cost, wide supply range instrumentation amplifier from Analog Devices that requires only one external resistor to set any gain between 5 and 1000. It is designed to work with a variety of signal voltages, featuring a wide input range and rail-to-rail output. The device is packaged in an 8-lead SOIC (SOIC-8) and operates over a wide supply range, making it suitable for industrial, medical, and automotive applications. An instrumentation amplifier (in-amp) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is a key building block in precision measurement systems, where it conditions small sensor signals before analog-to-digital conversion. In-amps are characterized by high input impedance, high common-mode rejection ratio (CMRR), and low offset voltage, making them ideal for bridge sensors, thermocouples, and other low-level signal sources. Key features of the AD8227ARZ include a gain range of 5 to 1000 set by a single external resistor, a wide supply range of ±2.25 V to ±18 V (or 4.5 V to 36 V single supply), and a rail-to-rail output stage. It offers a 3 dB bandwidth of 250 kHz at G = 5, a slew rate of 1.2 V/µs, and an input bias current of 27 nA. The device also features low offset voltage and drift, ensuring accurate signal conditioning over temperature. The AD8227 uses a classic three-op-amp architecture with a precision laser-trimmed resistor network, providing excellent CMRR and gain accuracy. The rail-to-rail output allows maximum dynamic range in single-supply applications, while the wide supply range accommodates both 5 V and ±15 V systems. The SOIC-8 package is industry-standard, enabling easy PCB layout and drop-in replacement in many designs. Typical applications include industrial process control, bridge amplifiers, medical instrumentation, and data acquisition systems. The AD8227ARZ is particularly suited for applications requiring high accuracy over a wide input voltage range, such as motor control current sensing and battery monitoring. When designing with the AD8227ARZ, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors placed close to the device. The gain-setting resistor should be a precision resistor with low temperature coefficient to maintain gain accuracy. For best CMRR performance, keep the input traces balanced and shielded.
AD8227ARZ-RL7 - Wide Supply In-Amp | Analog Devices
The Analog Devices AD8227ARZ-RL7 is a low cost, wide supply range instrumentation amplifier supplied in an 8-lead SOIC package on tape and reel. It needs only one external resistor to set any gain between 5 and 1000. According to the AD8227 datasheet (Rev. 0), the amplifier operates from dual supplies spanning ±1.5 V to ±18 V, or a single supply from 2.2 V to 36 V, and provides a rail-to-rail output stage. Because the input range can extend below the negative supply, small ground-referenced signals can be amplified without dual supplies, simplifying system power architectures. An instrumentation amplifier (in-amp) is a precision differential amplifier with high common-mode rejection, typically used to extract small signals from sensors, bridges, or transducers in the presence of common-mode noise. It sits above the general category of operational amplifiers and is a key building block of signal-conditioning chains for analog-to-digital converters. The AD8227 belongs to this product hierarchy: instrumentation amplifier -> precision amplifier -> analog signal conditioning -> integrated circuit. Its single-resistor gain programming and balanced pinout make it easy to apply in factory automation, medical monitors, and automotive modules. Key features include the 5-to-1000 gain range, wide dual/single supply operation, rail-to-rail output swing, and a REF pin protected by ESD diodes for level shifting into single-supply ADCs. The A grade (ARZ) exhibits about 27 nA typical input bias current, while the B grade (BRZ) improves this to 20 nA. The input common-mode range and the ability to drive rail-to-rail outputs allow the signal to make full use of supply rails. From an architecture perspective, the AD8227 is a three-op-amp style instrumentation amplifier enhanced for wide supply and low cost. It merges a precision front end with an output stage capable of sensing the negative rail, making it suitable for systems that only have one power supply. This low-cost approach is aimed at high-volume industrial and consumer measurement applications where price matters, but CMRR and gain accuracy cannot be sacrificed. Typical applications include load-cell and strain-gauge bridge conditioning, industrial current-shunt monitoring, medical biosignal acquisition, automotive sensor interfaces, and ADC driver circuits where the REF pin shifts the output. The wide input range and single-supply compatibility make it a versatile choice for mixed-signal boards. When designing with this part, remember to keep the external gain resistor close to the RG pins with low thermal drift, and never drive the REF pin more than 0.3 V beyond the supplies. These simple precautions preserve gain accuracy and prevent ESD diode conduction.
AD8227BRZ - Wide Supply Range In-Amp | Analog Devices
The AD8227BRZ is a low cost, wide supply range instrumentation amplifier from Analog Devices that requires only one external resistor to set any gain between 5 and 1000. It is designed to work with a variety of signal voltages, featuring a wide input range and rail-to-rail output. The device operates from dual supplies of ±2.25 V to ±18 V or single supplies of 4.5 V to 36 V, making it versatile for industrial and medical applications. Housed in an 8-lead SOIC package, the AD8227BRZ offers a bandwidth of 250 kHz at G = 5 and a low input offset voltage of 100 µV, ensuring accurate signal conditioning. An instrumentation amplifier (in-amp) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is a specialized operational amplifier (op-amp) topology with high input impedance and high common-mode rejection ratio (CMRR), making it ideal for precise measurement of small signals in noisy environments. In the hierarchy of analog signal processing, an in-amp is a key building block within the broader category of linear amplifiers, which are essential in data acquisition systems, sensor interfaces, and medical instrumentation. Key features of the AD8227BRZ include a wide supply range, rail-to-rail output swing, and a gain range of 5 to 1000 set by a single external resistor. The device also offers a low quiescent current of 700 µA, making it suitable for battery-powered applications. Its input offset voltage is 100 µV, and it has a CMRR of 80 dB at G = 5, providing excellent rejection of common-mode noise. The AD8227BRZ is specified over the industrial temperature range of -40°C to +125°C, ensuring reliable operation in harsh environments. Technically, the AD8227 uses a three-op-amp architecture with a precision laser-trimmed resistor network, achieving high accuracy without external trimming. The gain is set by an external resistor, RG, connected between the RG pins, allowing flexible configuration. The device's rail-to-rail output stage enables maximum dynamic range, and its wide input range accommodates signals beyond the supply rails, enhancing its versatility. The AD8227BRZ is designed for low power consumption, making it ideal for portable and remote sensing applications. Typical applications include industrial process control, bridge amplifiers, medical instrumentation, and data acquisition systems. In industrial settings, the AD8227BRZ can amplify small sensor signals from thermocouples or strain gauges, rejecting common-mode interference. In medical devices, it provides accurate ECG or EEG signal conditioning. Its wide supply range and low power make it suitable for battery-operated equipment. When designing with the AD8227BRZ, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors placed close to the device. The reference pin (VREF) should be driven with a low-impedance source to maintain CMRR. For optimal performance, use precision resistors for the gain-setting resistor to minimize gain error.
AD8227BRZ-RL7 - Low Cost Wide Supply Range In-Amp | Analog Devices
The AD8227BRZ-RL7 is a low cost, wide supply range instrumentation amplifier from Analog Devices. It requires only one external resistor to set any gain between 5 and 1000, making it highly versatile for a variety of signal conditioning applications. The device features a wide input range and rail-to-rail output, allowing the signal to make full use of the supply rails. Because the input range can also go below the negative supply, small signals near ground can be amplified without requiring dual supplies. The AD8227 operates on supplies ranging from ±1.5 V to ±18 V (2.2 V to 36 V single supply). An instrumentation amplifier (in-amp) is a type of differential amplifier that has been optimized for high input impedance, high common-mode rejection, and low offset voltage. It is typically used to amplify small differential signals in the presence of large common-mode voltages, such as those from bridge sensors, thermocouples, and medical instrumentation. The AD8227 belongs to the family of instrumentation amplifiers, which are a subset of operational amplifiers (op amps) designed specifically for precision measurement applications. Key features of the AD8227 include a wide supply range, rail-to-rail output, and a gain range of 5 to 1000 set by a single external resistor. The device also offers low input bias current and low offset voltage, ensuring accurate signal amplification. The AD8227 is available in an 8-lead SOIC package, which is compact and suitable for space-constrained designs. Technically, the AD8227 uses a three-op-amp topology with an internal precision resistor network, providing excellent common-mode rejection and gain accuracy. The device is laser-trimmed for low offset voltage and drift, ensuring stable performance over temperature. The wide supply range and rail-to-rail output make it suitable for both single-supply and dual-supply applications. Typical applications include industrial process control, bridge amplifiers, medical instrumentation, and data acquisition systems. The AD8227's ability to amplify signals near ground without dual supplies makes it ideal for battery-powered and single-supply systems. When designing with the AD8227, ensure that the external gain-setting resistor is placed close to the device to minimize parasitic capacitance and maintain stability. Also, consider the input common-mode range to avoid clipping the output.
AD8237ARMZ - Micropower Zero-Drift Rail-to-Rail In-Amp | ADI
The Analog Devices AD8237ARMZ is a micropower, zero-drift, true rail-to-rail instrumentation amplifier housed in an 8-pin MSOP package. It operates from a single 1.8 V to 5.5 V supply, draws only 130 µA typical quiescent current, and supports user-set gain from 1 to 1000 via two external resistors. According to the AD8237 manufacturer datasheet, the part employs an indirect current-feedback architecture that delivers true rail-to-rail input and output swing. An instrumentation amplifier (In-Amp) is a precision analog building block that amplifies a small differential voltage sitting on top of a large common-mode voltage. In-Amp -> differential amplifier -> op-amp -> analog IC -> semiconductor. The AD8237 belongs to the zero-drift chopper-stabilized family, which internally corrects its own offset and drift, eliminating the 1/f noise and DC offset drift typical of conventional three-op-amp In-Amp designs. Key specifications include 12 µV maximum input offset voltage (post-calibration), 0.05 µV/°C typical offset drift, 110 dB minimum common-mode rejection ratio (CMRR) at DC, and 100 kHz small-signal bandwidth at G=1. The device achieves 4 nV/√Hz input voltage noise spectral density and offers true rail-to-rail input and output swings over the entire supply range. The MSOP-8 footprint integrates the gain-setting resistors externally so the user can program any gain without disturbing CMRR. The AD8237 uses Analog Devices' indirect current-feedback topology combined with chopping and ping-pong auto-zero techniques to remove flicker noise. This architecture preserves CMRR across frequency because the gain-setting resistor ratio - not absolute value - determines gain accuracy. The result is an In-Amp that behaves like a precision DC amplifier but consumes only microwatts of quiescent power. Typical applications include portable ECG and biosignal front-ends, weigh scales and strain-gauge bridges, battery-powered industrial sensor conditioning, thermocouple amplifiers, and current-sense loops in handheld meters. The wide supply range (1.8 V-5.5 V) and micropower consumption make it ideal for any 2-cell AA, Li-ion, or coin-cell powered system. When designing with the AD8237, select precision 0.1% gain resistors to preserve CMRR, place a 0.1 µF ceramic bypass capacitor within 5 mm of the supply pin, and ensure the common-mode input voltage stays within the rails. Gain above 100 may require additional supply decoupling. This page synthesizes AD8237ARMZ distributor pricing, drop-in same-package alternatives from Analog Devices' instrumentation amplifier family, parametric comparison tables, and practical design notes not collected in a single place by the manufacturer datasheet.
AD823ARZ - Dual 16MHz JFET Op Amp | Analog Devices
The AD823ARZ is a dual precision, 16 MHz, JFET input operational amplifier from Analog Devices. It operates from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V, with true single-supply capability and an input voltage range extending below ground. The output swings rail-to-rail, and the device can drive capacitive loads up to 500 pF at unity gain. It delivers 15 mA output current with 0.5 V from the supplies, making it suitable for a wide range of precision analog applications. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog electronics, used in signal conditioning, filtering, and instrumentation. The AD823 is a dual op amp, meaning it contains two independent amplifiers in one package, saving board space and cost. It belongs to the JFET-input op amp family, which offers high input impedance and low input bias current, ideal for interfacing with high-impedance sensors and sources. Key features of the AD823ARZ include a 16 MHz unity-gain bandwidth, a slew rate of 25 V/µs, and excellent AC performance on a low quiescent current of 2.6 mA per amplifier. The input voltage range extends below ground in single-supply operation, allowing the amplifier to handle signals near or below the negative rail. The rail-to-rail output stage maximizes dynamic range, which is critical in battery-powered and low-voltage systems. The AD823 uses a JFET input stage with a precision bipolar output stage, providing low offset voltage and low noise. The device is designed for high-speed signal processing, with a fast settling time and low distortion. Its wide supply range and robust output drive make it versatile for both single-supply and dual-supply designs. Typical applications include photodiode amplification, active filters, data acquisition systems, and audio preamplifiers. The AD823's high input impedance and low bias current are particularly suited for transimpedance amplifiers and sensor interfaces. Its rail-to-rail output and wide bandwidth also make it suitable for driving ADCs and buffering reference voltages. When designing with the AD823ARZ, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors placed close to the device. The input voltage range extends below ground, but do not exceed the absolute maximum ratings. For single-supply operation, bias the inputs to mid-supply to maximize headroom.
AD8250ARMZ - 10MHz iCMOS PGIA, G=1/2/5/10 | Analog Devices
The Analog Devices AD8250ARMZ is a 10 MHz bandwidth, digitally programmable-gain instrumentation amplifier (PGIA) offering pin-selectable gains of 1, 2, 5, and 10 in a compact 10-lead MSOP (RM-10) package. It features a GΩ-class input impedance, 20 V/µs slew rate, fast 615 ns (max) settling time to 0.001%, and -110 dB THD, making it well suited to bridge-type sensors and high-sample-rate analog-to-digital converters. An instrumentation amplifier (INA / PGIA) is a closed-loop gain block that combines high common-mode rejection (CMRR), high input impedance, and a single-resistor-programmable differential gain. PGIA variants add a digital interface to switch gain on the fly, which lets one analog front-end handle widely varying sensor signals (thermocouples, strain gauges, shunt resistors, biopotential electrodes) without an external mechanical relay or analog switch network. The AD8250 occupies the mid-bandwidth, low-power niche between classic three-op-amp INAs such as the AD620 and the higher-frequency AD8421 family. Key specifications include 10 MHz small-signal bandwidth (G=1), 20 V/µs slew rate, 1.5 nV/√Hz input voltage noise density, 75 µV (max) input offset voltage, 0.5 µV/°C (max) offset drift, and a wide ±5 V to ±15 V (or 5 V to 30 V single-supply) operating range. The MSOP-10 footprint consumes roughly 60% less board area than an SOIC-8 INA, while parallel digital gain-select inputs simplify FPGA/MCU control. Quiescent current is typically 4.5 mA on ±15 V supplies. Architecturally, the AD8250 uses Analog Devices' iCMOS process, which combines high-voltage bipolar transistors on a sub-micron CMOS wafer to deliver wide supply range and low power without sacrificing ESD/EMC robustness. The topology is a classic three-op-amp INA, but the feedback resistors are switched by matched MOSFET networks rather than mechanical relays, eliminating glitch-free concerns of electromechanical switching. Internal overdrive protection prevents damage when the input exceeds the supply rails by up to ±25 V. Typical applications include industrial process control front-ends, weigh scales and load-cell amplifiers, ECG and biopotential signal conditioning, ATE (automatic test equipment) programmable-gain stages, and wide-dynamic-range data-acquisition (DAQ) systems driving 16-/18-/24-bit ADCs such as the AD7612, AD7606, or AD7768. The transparent gain mode also supports legacy pin-strap designs without an FPGA. When designing with the AD8250, route the gain-select logic lines away from the input traces to preserve CMRR, and use a low-impedance ground plane beneath the package. Reference-design AN-1385 demonstrates -111 dB THD at 1 kHz and 91 dB SNR when paired with the AD7612 and an ADG1209 mux, validating the part for precision DAQ. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving an engineer a single source for part selection, sourcing, and reference-design context.
AD8251ARMZ - 10MHz iCMOS Programmable Gain In-Amp | ADI
The Analog Devices AD8251ARMZ is a 10 MHz bandwidth, digitally programmable gain instrumentation amplifier (in-amp) with GΩ input impedance, low output noise, and low distortion, housed in a 10-lead MSOP package. It supports user-selectable gains of 1, 2, 4, and 8 set via transparent parallel logic inputs or a pin-strapped mode, and operates from ±5 V to ±15 V dual supplies. An instrumentation amplifier is a precision differential amplifier with high common-mode rejection ratio (CMRR), high input impedance, and a single-ended output - purpose-built for extracting small differential signals sitting on top of large common-mode voltages. Within the broader taxonomy, the AD8251 sits in the chain: instrumentation amplifier -> precision amplifier -> amplifier IC -> analog signal chain -> semiconductor. Programmable-gain in-amps specifically address dynamic-range challenges in sensor conditioning by allowing the system to optimize gain per channel or per measurement range. Key features include a high CMRR of 98 dB minimum at G = 8, gain drift of 10 ppm/°C maximum, and offset drift of 1.8 µV/°C maximum at G = 8. Excellent AC performance is delivered through a fast 785 ns settling time to 0.001% (maximum), a 20 V/µs minimum slew rate, and low THD of -110 dB. These specifications make the AD8251 suitable for interfacing directly with sensors and driving high-sample-rate analog-to-digital converters (ADCs) without the need for an additional buffer stage. The device uses Analog Devices' iCMOS (industrial CMOS) process technology, which enables high-voltage analog operation (±15 V) on a small die, fitting a 10-lead MSOP package. The architecture pairs a classic three-op-amp in-amp topology with switched feedback resistors selected by logic-level gain pins, allowing transparent gain changes mid-acquisition. Power dissipation is approximately 6 mA quiescent current over the supply range, supporting portable instrumentation designs. Typical applications include industrial process controls, weigh scales, ECG/biomedical front-ends, and data acquisition (DAQ) systems where programmable gain optimizes ADC full-scale utilization across multiple sensor ranges. The wide supply range also supports PLC analog input modules and ATE (automatic test equipment) signal conditioning. Designers should pay attention to input bias-current return paths when the source impedance is high (e.g., transformer-coupled or biased piezoelectric sensors). Decouple both supply pins with 0.1 µF ceramic capacitors placed within 5 mm of the device, plus a 10 µF bulk tantalum or ceramic at each supply. Use a ground plane and keep input traces short and guarded for maximum CMRR at high frequencies. This page synthesizes distributor pricing, drop-in alternative inventory, and practical design notes not found in the manufacturer datasheet alone, with verified web data captured on 2026-10-04.
AD8251ARMZ-R7 - 10MHz Digitally Programmable Gain In-Amp | ADI
The Analog Devices AD8251ARMZ-R7 is a 10 MHz bandwidth, digitally programmable-gain instrumentation amplifier (in-amp) with switchable gains of 1, 2, 4, and 8, housed in a 10-pin MSOP package. It delivers GΩ input impedance, 20 V/μs slew rate, low total harmonic distortion of −110 dB, and 785 ns (max) settling to 0.001%, making it ideal for high-sample-rate analog-to-digital converter front ends and precision sensor conditioning. An instrumentation amplifier (in-amp) is a precision differential amplifier optimized for accurate, low-noise amplification of small differential signals riding on large common-mode voltages. In-amps sit in the analog signal chain between sensors (thermocouples, strain gauges, bridge transducers, biopotential electrodes) and downstream ADCs, combining high common-mode rejection ratio (CMRR), high input impedance, and user-adjustable gain. Within the broader taxonomy, in-amps belong to the amplifier IC family, which is itself a subset of linear ICs and signal-conditioning components. The AD8251's iCMOS™ process enables ±15 V supply operation in a small surface-mount footprint. Key differentiating features of the AD8251 include its parallel digital gain-control interface (two logic inputs select G = 1, 2, 4, or 8) allowing microsecond gain switching without analog glitches, a maximum input bias current of 50 pA, integrated overvoltage protection up to ±40 V on the inputs, and low offset drift of 1 μV/°C. The 10 MHz small-signal bandwidth and 20 V/μs slew rate are preserved at all gain settings, which is uncommon in programmable-gain in-amps. An exposed thermal pad on the MSOP-10 footprint improves θJA for continuous industrial-temperature operation. Architecturally, the AD8251 uses a classic three-op-amp in-amp topology with precision thin-film gain-setting resistors and laser-trimmed input stages, then digitizes the gain selection via CMOS switches on the feedback network. The result is a single device that replaces discrete in-amp designs with manual relay or analog-gain-switch circuitry, reducing PCB area and improving gain-set repeatability. Power dissipation is approximately 30 mW at ±5 V supply, well within the MSOP-10 thermal budget. Typical applications include medical instrumentation (ECG, EEG front ends), industrial process control (PLC analog input modules, weigh scales), automated test equipment (ATE) scanner cards, and wideband data-acquisition systems driving 16-/18-bit SAR ADCs. Designers pair the AD8251 with high-impedance sensors and high-CMRR front-end filters to extract millivolt-level signals from noisy industrial environments. A key design consideration is that the digital gain-control pins (A0, A1) require clean CMOS-level logic; any ringing or slow edges can inject charge into the input stage. Decouple both supply rails with 0.1 μF X7R ceramic capacitors placed within 5 mm of the supply pins. For best CMRR above 10 kHz, keep source impedances balanced to within 1 Ω and place the common-mode filter capacitor directly across the input pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
AD8251ARMZ-RL - 10MHz Prog Gain In-Amp | Analog Devices
The Analog Devices AD8251ARMZ-RL is a 10 MHz bandwidth, digitally programmable gain instrumentation amplifier (in-amp) housed in a 10-lead MSOP (RM) package with iCMOS process technology. It provides pin-strap or parallel-port selectable gains of 1, 2, 4, and 8, delivering up to 20 V/µs slew rate, 785 ns settling to 0.001% (maximum), and -110 dB total harmonic distortion (THD). According to the Analog Devices AD8251 datasheet, the device operates from ±5 V to ±15 V dual supplies and offers 98 dB minimum CMRR at G = 8. An instrumentation amplifier is a precision differential amplifier with very high input impedance (typically GΩ) and a single-ended output, designed to extract small differential signals sitting on top of large common-mode voltages. The category hierarchy runs: instrumentation amplifier -> differential amplifier -> operational amplifier -> analog IC -> semiconductor. In-amps sit between the sensor and the ADC, providing gain, level shifting, and common-mode rejection that a bare op-amp cannot achieve with a single device. The AD8251 uses Analog Devices' iCMOS (industrial CMOS) high-voltage process, enabling ±15 V supplies in a small 10-MSOP outline. Other headline specifications include 10 ppm/°C maximum gain drift, 1.8 µV/°C maximum offset drift (G = 8), and GΩ input impedance. Parallel digital gain control is implemented through two logic inputs (A0, A1) that latch on the rising edge of WR. The 10 MHz small-signal bandwidth at unity gain makes the AD8251 suitable for driving high-sample-rate analog-to-digital converters without compromising settling time or distortion. The combination of low noise, low drift, and fast settling enables 16-bit and 18-bit data-acquisition systems where DC accuracy and AC transient response both matter. Typical applications include industrial process controls, weigh scales, multichannel data acquisition systems, ECG/medical instrumentation front ends, and automotive sensor interfaces. The wide supply range also makes it suitable for ±12 V and ±15 V industrial rails. When designing with the AD8251, pay close attention to the input common-mode range, which is rail-to-rail at low gains and rolls off near the rails at G = 8. Decouple the supplies with 0.1 µF ceramic capacitors placed within 5 mm of the supply pins, and route the gain-control logic signals away from the sensitive IN+/IN- traces. This page synthesizes distributor pricing, drop-in alternatives, application examples, and design notes not consolidated on the manufacturer datasheet - a single source for engineers evaluating the AD8251ARMZ-RL for sensor signal chains.
AD825AR - 30MHz High-Speed JFET Amplifier | Analog Devices
Analog Devices AD825AR is a single-channel, high-speed JFET-input operational amplifier with a 30 MHz gain-bandwidth product, 80 V/us slew rate, and 8-lead SOIC package. The device is designed for signal-conditioning and data-acquisition systems that require low input bias current, low voltage noise, and consistent small-signal performance. A JFET-input operational amplifier is a voltage-amplifying semiconductor that uses junction field-effect transistors at its input. This input architecture provides low input bias current, making the AD825AR suitable for sensors, instrumentation, and high-impedance signal sources. Within the broader hierarchy, it belongs to the operational-amplifier family, which supports analog signal conditioning, measurement, feedback control, and data acquisition. The principal advantages of the AD825AR include an input bias current of 20 pA, input voltage noise of 12 nV/sqrt(Hz), and input current noise of 10 fA/sqrt(Hz). Its 80 V/us slew rate supports accurate reproduction of rapidly changing signals, while the 30 MHz gain-bandwidth product provides useful bandwidth for low-amplitude, high-frequency content. The amplifier is optimized for fully specified ±15 V operation. Its low-noise JFET input stage is particularly useful when source impedance makes amplifier input current important. The combination of low bias current, low voltage noise, and high slew rate allows the device to process signals from sensors, transducers, and measurement front ends without allowing input bias effects to overwhelm the wanted signal. AC performance, gain, bandwidth, slew rate, and drive capability remain stable over temperature according to the manufacturer documentation. Typical applications include precision signal conditioning, low-level waveform acquisition, current monitoring, instrumentation, and buffered sensor interfaces. The AD825AR can also serve as an input buffer between a high-impedance transducer and a downstream measurement or conversion stage. Its operating characteristics make it particularly useful when low-frequency noise and source loading must be balanced against wideband signal support. When designing around the AD825AR, place input and feedback components close to the relevant pins and provide adequate bypassing on the positive and negative supply rails. Confirm output swing, load current, input common-mode range, and stability requirements against the actual circuit. Avoid placing high-impedance nodes next to long switching-current paths, since parasitic capacitance can disturb gain, bandwidth, and settling behavior. This product page combines the manufacturer specifications, a practical application analysis, same-footprint replacement guidance, and design-focused comparisons. It helps engineers evaluate the AD825AR not only by headline bandwidth, but also by noise, bias current, slew rate, drive capability, supply requirements, and PCB implementation constraints.
AD826AR - Dual 50 MHz High-Speed Op Amp | Analog Devices
Analog Devices AD826AR is a dual, high-speed voltage-feedback operational amplifier with 50 MHz unity-gain bandwidth, 350 V/us slew rate, and a 70 ns settling time to 0.01%. The device is supplied in an 8-pin SOIC package and combines two amplifiers with a maximum supply current of 7.5 mA per amplifier. Its unity-gain stability and high output-drive capability make it suitable for video, CATV, data acquisition, active filtering, ADC/DAC buffering, and cable-driving circuits. A voltage-feedback operational amplifier is an analog signal-conditioning IC that uses negative feedback to amplify a difference between two input voltages. Positioned within the broader voltage-amplifier and signal-processing hierarchy, the AD826AR provides wide closed-loop bandwidth, rapid slew rate, and sufficient output-current capability for high-speed analog paths. It is designed for applications in which unity-gain operation must remain stable without external compensation. The AD826AR's principal features include 50 MHz unity-gain bandwidth, 350 V/us slew rate, 70 ns settling time to 0.01%, and low input offset voltage of 2 mV maximum. Each amplifier draws at most 7.5 mA of supply current. The dual configuration reduces package count when two independent high-speed channels are required, while also supporting differential signal paths when the two amplifiers are connected as a driver and receiver. The device is specified for single +5 V operation and dual +5 V to +/-15 V operation. This operating range allows its use in legacy analog systems as well as lower-voltage designs where a positive supply and a negative rail are available. Its voltage-feedback architecture provides a practical balance between bandwidth, output-drive capability, power consumption, and implementation simplicity. The manufacturer also identifies ADC/DAC buffering and active filtering as important data-acquisition applications. Typical uses include composite video and CATV signal conditioning, copier and scanner analog channels, LCD interface circuitry, image-scanner front ends, and high-speed instrumentation. The AD826AR is especially useful where a source has appreciable capacitance, because its output stage is designed to drive unlimited capacitive loads while maintaining stable operation at unity gain. When laying out the circuit, use short, direct signal paths and provide a low-impedance return for each power pin. Decoupling capacitors should be placed immediately beside the device to suppress supply ripple and prevent high-frequency feedback through board traces. Confirm output swing, input common-mode range, load current, and capacitive-load stability against the operating conditions before using the amplifier with unusual loads. This product page combines the AD826AR's principal performance figures, package information, application guidance, and replacement analysis into an engineering-oriented selection reference. It also distinguishes exact drop-in choices from packaging-only order codes, helping designers preserve the 8-pin SOIC footprint while avoiding unnecessary substitutions.
AD827SE/883B - High Speed Dual Op Amp | Analog Devices
The AD827SE/883B is a high-speed, low-power dual operational amplifier from Analog Devices, packaged in a 20-lead ceramic leadless chip carrier (CLCC) measuring 9x9 mm. It is a dual version of the industry-standard AD847 op amp, offering a 300 V/µs slew rate and 50 MHz unity-gain bandwidth while consuming only 100 mW from ±5 V supplies. The device operates from ±5 V to ±15 V power supplies and is specified for standard (general purpose) amplification applications. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used in signal conditioning, filtering, and mathematical operations. Op amps are fundamental building blocks in analog electronics, forming the basis of active filters, comparators, integrators, and many other circuits. The AD827SE/883B is a dual op amp, meaning it contains two independent amplifiers in one package, saving board space and cost in multi-channel applications. Key features include a 50 MHz unity-gain bandwidth, 300 V/µs slew rate, 120 ns settling time, and the ability to drive unlimited capacitive loads. It offers excellent video performance with 0.04% differential gain and 0.19° differential phase at 4.4 MHz. DC performance includes a maximum input offset voltage of 2 mV, open-loop gain of 3,500 V/V into 500 Ω loads, and low input voltage noise of 15 nV/√Hz. Common-mode rejection ratio is a minimum of 80 dB, and power supply rejection ratio is maintained above 20 dB at frequencies up to 1 MHz. The AD827SE/883B is designed for high-speed signal processing, video amplification, and precision analog applications. Its low power consumption and high slew rate make it suitable for portable and battery-powered equipment. The ceramic package provides hermetic sealing, making it ideal for military and aerospace applications where reliability is critical. Typical applications include video line drivers, analog-to-digital converter (ADC) input buffers, active filters, and instrumentation amplifiers. The device's high bandwidth and fast settling time ensure accurate signal reproduction in high-frequency systems. When designing with the AD827SE/883B, ensure proper power supply decoupling with 0.1 µF ceramic capacitors close to the supply pins. The device can drive capacitive loads without oscillation, but for optimal performance, use a small series resistor (e.g., 50 Ω) when driving long cables.
AD827SQ/883B - Dual High Speed Op Amp | Analog Devices
The AD827SQ/883B is a dual high-speed, low-power operational amplifier from Analog Devices, manufactured in a hermetic 8-pin CERDIP package. It is the military-grade (MIL-STD-883B) version of the industry-standard AD827, offering a slew rate of 300 V/µs and a unity-gain bandwidth of 50 MHz while consuming only 100 mW from ±5 V supplies. The device operates from ±5 V to ±15 V power supplies and features an open-loop gain of 3,500 V/V into 500 Ω loads, low input voltage noise of 15 nV/√Hz, and a maximum input offset voltage of 2 mV. With a common-mode rejection ratio of at least 80 dB and power supply rejection better than 20 dB at 1 MHz, it is designed for high-speed signal conditioning in demanding environments. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used in analog circuits for amplification, filtering, and signal conditioning. The AD827 is a dual op amp, meaning it contains two independent amplifiers in one package, providing design flexibility and space savings. As a high-speed op amp, it is part of the broader category of linear integrated circuits, which are fundamental building blocks in analog signal processing systems. Key features of the AD827SQ/883B include its high slew rate and bandwidth, which enable it to handle fast transient signals without distortion, making it suitable for video and pulse amplification. The low power consumption of 100 mW per amplifier is advantageous in power-sensitive applications. The military-grade qualification ensures reliability in harsh environments, with a specified operating temperature range of -55°C to +125°C. The device also offers excellent AC performance, with a gain-bandwidth product of 50 MHz and a settling time of 100 ns to 0.1%. Technically, the AD827 is a dual version of the AD847, sharing its architecture and performance characteristics. It uses a complementary bipolar process to achieve high speed and low noise. The input stage provides low offset voltage and high common-mode rejection, while the output stage can drive 500 Ω loads with high open-loop gain. The device is internally compensated for unity-gain stability, simplifying its use in various configurations. Typical applications include high-speed data acquisition systems, video amplifiers, active filters, and precision instrumentation. Its high slew rate and bandwidth make it ideal for driving analog-to-digital converters (ADCs) and for use in communication systems where signal integrity is critical. The military-grade version is particularly suited for aerospace and defense applications where reliability is paramount. When designing with the AD827SQ/883B, ensure proper power supply decoupling with 0.1 µF capacitors close to the supply pins to maintain stability and reduce noise. The device's high bandwidth requires careful PCB layout to minimize parasitic capacitance and inductance, which can affect performance.