Amplifier ICs
بەرهەمەکان (3,200+)
AD8310ARM - 95dB Log Amp DC-440MHz | Analog Devices
The AD8310ARM is a complete, fast, voltage-output, DC to 440 MHz demodulating logarithmic amplifier (log amp) from Analog Devices. It provides a 95 dB dynamic range from -91 dBV to +4 dBV, with a rise time of less than 15 ns and the ability to drive up to 25 mA into a grounded load. The device operates from a single 2.7 V to 5.5 V supply, drawing a typical quiescent current of 8 mA. It is housed in an 8-lead MSOP package, making it suitable for space-constrained applications. A logarithmic amplifier is an electronic circuit that produces an output voltage proportional to the logarithm of the input signal amplitude. In the context of RF and IF signal processing, a demodulating log amp converts an AC input signal into a DC output voltage that represents the signal level in decibels (dB). This is essential for applications such as received signal strength indication (RSSI), power measurement, and level detection. The AD8310 belongs to the family of logarithmic amplifiers, which are a subset of special-purpose amplifiers used in analog signal processing chains. Key features of the AD8310ARM include its wide dynamic range of 95 dB, which allows accurate measurement of signals from very small to relatively large amplitudes. The device offers a logarithmic slope of 24 mV/dB and an intercept of -95 dBV, providing a linear-in-dB output characteristic. Its fast response time, with a rise time of less than 15 ns, enables real-time signal level monitoring in high-speed communication systems. The high output current capability of 25 mA allows direct driving of subsequent stages without additional buffering. Technically, the AD8310 uses a multistage demodulating architecture, where successive detection stages are summed to produce a logarithmic response. This design achieves excellent linearity of ±0.4 dB over the specified range. The device operates from DC to 440 MHz, covering audio through UHF frequencies, making it versatile for various applications. The input is single-ended, and the output is a voltage proportional to the log of the input amplitude, with a full-scale output swing of up to 2.5 V. Typical applications include RF power measurement, signal strength indication in receivers, radar and communication systems, and test equipment. The AD8310ARM is also used in cellular base stations, wireless infrastructure, and portable devices where accurate signal level detection is required. Its low power consumption and small package make it ideal for battery-powered instruments. When designing with the AD8310ARM, ensure proper decoupling of the power supply pins with 0.1 µF and 1 µF capacitors placed close to the device. The input should be AC-coupled if the signal has a DC offset, and the output can drive capacitive loads up to 50 pF without degradation. For optimal performance, keep the input signal within the specified dynamic range to avoid saturation.
AD8310ARMZ - 95dB Log Amp DC-440MHz | Analog Devices
The AD8310ARMZ is a complete, fast, voltage-out, DC to 440 MHz demodulating logarithmic amplifier (log amp) from Analog Devices. It provides a 95 dB dynamic range and is capable of driving up to 25 mA into a grounded load in under 15 ns. The device operates from a single 2.7 V to 5.5 V supply and is available in an 8-lead MSOP package, making it ideal for a wide range of RF and IF signal chain applications. A logarithmic amplifier is a specialized amplifier that produces an output voltage proportional to the logarithm of the input signal amplitude. This allows a wide dynamic range of input signals to be compressed into a manageable output range, which is essential for applications such as received signal strength indication (RSSI), power measurement, and level detection. The AD8310 uses a progressive compression (successive detection) architecture, which provides accurate logarithmic conversion over a wide frequency range. Key features of the AD8310ARMZ include a 95 dB dynamic range, a logarithmic slope of 24 mV/dB, a logarithmic intercept of -88 dBm, and a fast voltage-mode output that can drive 25 mA loads. The device also features an enable pin (ENBL) for power-down control, and it operates over the industrial temperature range of -40°C to +85°C. The MSOP-8 package is compact and suitable for space-constrained designs. The AD8310's architecture uses nine cascaded amplifier stages, each with a gain of 10 dB, followed by detectors. The detector outputs are summed and converted to a single-ended voltage, scaled at 2 µA/dB. This design provides excellent temperature stability and accuracy over the full dynamic range. The device is specified for operation from DC to 440 MHz, making it suitable for both baseband and IF applications. Typical applications include RF power amplifier control, signal strength measurement, radar and communication systems, and test equipment. The AD8310ARMZ is particularly well-suited for use in cellular base stations, wireless infrastructure, and portable RF devices where accurate signal level monitoring is required. When designing with the AD8310ARMZ, it is important to provide adequate decoupling on the supply pins and to consider the output loading, as the device can drive up to 25 mA. The enable pin can be used to reduce power consumption in battery-powered applications.
AD8338ACPZ-R7 - 80dB Gain Range 18MHz VGA | Analog Devices
The Analog Devices AD8338ACPZ-R7 is a low power, 18 MHz variable gain amplifier (VGA) with an 80 dB gain range, approximately 3 mA supply current from a single 5V supply, housed in a compact 16-lead LFCSP (3x3 mm) package. A variable gain amplifier is an amplifier whose gain is set by an external control voltage, enabling automatic gain control (AGC) in systems where input signal levels vary widely. Within the amplifier IC hierarchy - amplifier > special purpose amplifier > VGA > signal conditioning IC - the AD8338 sits between a sensor or mixer front end and an ADC, scaling wide-dynamic-range signals to match converter full-scale. This makes the VGA category fundamental to ultrasound, radar, and communications receiver signal chains. Key features include a wide gain range of 80 dB with linear-in-dB gain control via a single external GAIN pin voltage, low power consumption of approximately 3 mA supply current, and 18 MHz well-defined bandwidth from LF to 18 MHz. Fully differential inputs and outputs provide excellent common-mode rejection, and the device can also be driven single-ended with minimal external circuitry. A power-down pin conserves energy in duty-cycled battery-operated systems. The AD8338 uses a proprietary X-AMP-style architecture achieving high linearity and low noise across the full gain range. The fully differential signal path minimizes even-order distortion and improves signal integrity, while low power consumption extends battery life in portable instruments such as handheld ultrasound scanners. Typical applications include ultrasound time-gain compensation (TGC), radar and sonar receivers, communication receiver AGC loops, and industrial instrumentation front ends. In ultrasound, it amplifies weak deep-tissue echoes while attenuating strong near-field returns; in RF/IF receivers it optimizes dynamic range before digitization by the ADC. Design tip: provide solid supply decoupling and keep the gain control node quiet - gain-control feedthrough directly converts GAIN-pin noise into output noise. Balance the differential source impedance for optimal CMRR performance across the band. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
AD8412AWBRZ - 1.8MHz High BW Current Sense Amp | Analog Devices
The AD8412AWBRZ is a high-bandwidth, bidirectional current sense amplifier from Analog Devices, designed for accurate current measurement across a shunt resistor in industrial and automotive applications. It features a wide input voltage range of -2V to 50V, a high bandwidth of 1.8MHz, and a fixed gain of 10V/V. The device operates from a single 2.9V to 5.5V supply and is available in a compact 8-lead SOIC package (SOIC-8). A current sense amplifier is a specialized operational amplifier configured to amplify the small differential voltage across a sense resistor while rejecting common-mode voltages. It is a critical building block in power management systems, motor control, and battery monitoring, where precise current sensing is essential for efficiency and safety. The AD8412A belongs to the family of current sense amplifiers, which are a subset of instrumentation amplifiers and are widely used in closed-loop control systems. Key features of the AD8412AWBRZ include its wide common-mode input range, which allows it to sense current on both high-side and low-side configurations, and its high bandwidth, which enables accurate measurement of fast transients. The DigiTrim architecture provides precision offset and gain specifications without the need for chopping or autozeroing, avoiding intermodulation distortion. The device also offers a shutdown feature for power saving and is specified over the extended industrial temperature range of -40°C to +125°C. Technically, the AD8412A uses a proprietary DigiTrim calibration technique that trims offset and gain at the wafer level, achieving typical offset voltage of 200µV and gain error of 0.15%. The high bandwidth of 1.8MHz ensures that the amplifier can track current waveforms in switching power supplies and motor drives without significant delay. The device is designed to operate with a single supply, simplifying power supply design. Typical applications include high-side current sensing in 48V/12V DC-DC converters, motor control in automotive and industrial systems, and battery management in electric vehicles. The wide input range and high bandwidth make it suitable for both low-side and high-side sensing in harsh environments. When designing with the AD8412AWBRZ, ensure that the shunt resistor is placed appropriately and that the input pins are protected against overvoltage. The gain is fixed at 10V/V, so the output voltage is directly proportional to the sensed current. Proper PCB layout with Kelvin connections to the shunt is recommended to minimize parasitic resistance and maintain accuracy.
AD841JQ - Wide-Bandwidth Precision Op Amp | Analog Devices
Analog Devices AD841JQ is a wide-bandwidth, high-precision operational amplifier built with junction-isolated complementary bipolar technology. The device operates from dual ±15 V supplies in the manufacturer datasheet test conditions and belongs to the AD841 family of high-speed signal-chain amplifiers. It is packaged in the J-lead ceramic qualification format identified by the AD841JQ ordering code. An operational amplifier, commonly called an op amp, is a high-gain differential amplifier with external feedback. Its hierarchy extends from analog signal conditioning to amplifiers and integrated circuits. Engineers use op amps for voltage amplification, current-to-voltage conversion, active filtering, differential sensing, and feedback control. High-precision and wide-bandwidth devices occupy the performance-focused end of this category, where accurate signal transfer and usable small-signal bandwidth are important. The AD841 family combines complementary bipolar circuitry with precision-oriented performance. Analog Devices describes it as part of a family offering wide bandwidth and high precision. The related AD842 is stable at a gain of two or greater and provides at least 100 mA of output-current drive, making that family member relevant to higher-load or gain-of-two signal-chain designs. The AD841 and AD842 are related devices, but their exact enablement, stability, and output-drive characteristics should be compared from their respective datasheets before interchangeability is assumed. The AD841 uses Analog Devices junction-isolated complementary bipolar, or CB, process technology. This process supports high-frequency analog operation while retaining low-voltage amplification characteristics required by precision measurement and signal-processing circuits. Design evaluation should account for gain-bandwidth behavior, output-drive limits, input and output voltage ranges, stability at the intended closed-loop gain, and capacitive-load driving capability. Typical circuit roles include low-level front-end amplification, instrumentation-style differential interfaces, active analog filters, and signal-chain conditioning after sensors or converters. In each case, the closed-loop feedback network determines most of the practical gain and bandwidth. The AD841 can be considered when its published gain stability, dynamic output range, noise, offset, and drive characteristics satisfy the signal amplitude and impedance requirements of the selected application. PCB implementation deserves careful attention because wide-bandwidth amplifiers can react to parasitic capacitance, imperfect grounding, and long feedback routes. Place the feedback components close to the device, maintain short output paths, provide stable supply bypassing, and avoid routing sensitive input and output traces in parallel. Evaluate stability with the actual source impedance, load capacitance, cable capacitance, and supply network used in production hardware. This product page combines the manufacturer description, ordering information, package guidance, application analysis, and practical implementation considerations for AD841JQ. It also distinguishes confirmed product-family information from items that require direct verification in the AD841 datasheet, helping engineers plan a replacement search without overlooking pinout, stability, or electrical differences.
AD841KN - Wideband Unity-Gain Op Amp | Analog Devices
Analog Devices AD841KN is a wideband, unity-gain-stable operational amplifier built on a junction-isolated complementary bipolar process. The device belongs to the AD84x family of high-speed, high-precision amplifiers and is packaged as a 14-pin PDIP. Its combination of broad bandwidth, precision-oriented bipolar construction, and direct voltage feedback supports applications requiring accurate signal amplification at moderate and high frequencies. An operational amplifier is a voltage-controlled, high-gain active device used in feedback networks to amplify, filter, buffer, or compare signals. The AD841KN is a single amplifier rather than an instrumentation amplifier, so its external resistor and compensation choices determine the usable gain, bandwidth, output drive, and offset behavior. Its unity-gain stability makes it suitable for closed-loop voltage followers and noninverting stages without relying on the minimum stable gain of the related AD840. The principal differentiators are unity-gain stability, wide bandwidth, and the family’s junction-isolated complementary bipolar construction. Analog Devices identifies the AD841 as a member of a high-speed, high-precision amplifier family and describes the AD842 as a related device that is stable at a gain of two or greater and provides at least 100 mA of output-current drive. The AD841 is intended for systems that need its particular unity-gain-stable profile rather than the gain-of-two stability and output-drive characteristics of the AD842. The bipolar process combines DC precision with wideband AC performance. In practical closed-loop designs, the useful bandwidth depends on amplifier gain, feedback impedance, load capacitance, slew rate, output-current demand, and power-supply bypass. Component selection should account for the complete feedback network because a nominally unity-gain-stable device still requires stable resistors, suitable output loading, and clean supply rails to preserve expected settling behavior. Typical applications include precision signal conditioning, active filtering, waveform amplification, instrumentation interfaces, low-level sensor conditioning, and communication-signal paths. It can also serve as a buffered output stage when the circuit requires more drive than a general-purpose precision amplifier provides. In systems using the related family, the AD840 is optimized for stability at gains of ten or greater, while the AD842 supports gains of two or greater. For layout, place input and feedback components close to the amplifier pins, minimize feedback-loop area, and decouple each supply pin near the device. Avoid excessive capacitive loading on the output because it can impair stability and settling. Confirm operation across the intended supply voltage, load, temperature, and source impedances using the manufacturer’s recommended configurations rather than assuming that a generic feedback network preserves full bandwidth. This product page combines the AD841 family architecture, package details, replacement considerations, comparison data, and practical design guidance. It helps engineers distinguish the AD841KN’s unity-gain-stable role from the gain-specific AD840 and AD842 alternatives while preserving the same 14-pin PDIP footprint.
AD841SE/883B - 40MHz Unity-Gain Stable Op Amp | Analog Devices
The AD841SE/883B is a wideband, unity-gain stable, fast settling operational amplifier from Analog Devices, Inc. It is part of the AD841 family of high speed/high precision op amps, fabricated using Analog Devices' junction isolated complementary bipolar (CB) process. This process enables a combination of DC precision and AC performance, making the AD841SE/883B suitable for high speed signal conditioning, video and pulse amplifiers, data acquisition systems, line drivers, and active filters. The device is available in a 20-pin ceramic leadless chip carrier (CLCC) package, measuring 9x9 mm, and is specified for operation over the full military temperature range. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog electronics, used in signal conditioning, filtering, and mathematical operations. The AD841SE/883B is a general-purpose op amp, meaning it can be configured for various gain and bandwidth requirements. It belongs to the hierarchy: operational amplifier -> amplifier -> analog integrated circuit -> semiconductor device. Key features of the AD841SE/883B include a unity-gain bandwidth of 40 MHz, fast settling time to 0.01%, a slew rate of [DATA_NEEDED: Slew Rate] V/µs, and a full power bandwidth of 4.7 MHz for 20 V p-p into a 500 Ω load. DC performance includes a maximum input offset voltage of 1 mV and an input voltage noise of 13 nV/√Hz typical. The open-loop gain is [DATA_NEEDED: Open-Loop Gain]. These specifications make it ideal for applications requiring both high speed and precision. The AD841SE/883B is fabricated using a complementary bipolar process, which provides excellent DC linearity and high output drive capability. The device is unity-gain stable, meaning it can be used in buffer configurations without external compensation. The fast settling time ensures accurate acquisition in data acquisition systems, while the high bandwidth supports video and pulse amplification. Typical applications include high speed signal conditioning, video and pulse amplifiers, data acquisition systems, line drivers, and active filters. The device's wide bandwidth and fast settling make it suitable for test and measurement equipment, radar systems, and communication infrastructure. When designing with the AD841SE/883B, consider the power supply decoupling and layout to minimize parasitic capacitance and inductance. The CLCC package requires careful thermal management, and the device should be operated within its specified supply voltage range to ensure reliable performance.
AD841SH - 40MHz Unity-Gain Op Amp | Analog Devices
The Analog Devices AD841SH is a wideband, unity-gain-stable operational amplifier with a 40 MHz gain-bandwidth product, 300 V/µs slew rate, and 50 mA output-current drive, housed in an 8-pin hermetic package. The AD841SH uses Analog Devices' junction-isolated complementary bipolar process and operates from dual positive and negative supplies up to ±18 V. Its combination of wide bandwidth, rapid slew rate, and unity-gain stability makes it suitable for demanding high-speed signal-conditioning systems. An operational amplifier is an active analog building block that amplifies the voltage difference between its differential inputs while offering very high open-loop gain. The AD841 belongs to the hierarchy of operational amplifiers, analog amplifiers, signal-conditioning ICs, and semiconductor components. Unlike an instrumentation amplifier, the AD841 is a single general-purpose amplifier that can also perform buffering, scaling, summing, filtering, and impedance-conversion functions when its feedback network and stability requirements are respected. The AD841's principal features include 40 MHz gain-bandwidth product, unity-gain stability, 300 V/µs slew rate, and 50 mA minimum output-current drive. These specifications make it effective for preserving large-amplitude, high-frequency signals without excessive gain compression. According to the manufacturer datasheet, the devices are fabricated using a junction-isolated complementary bipolar process, allowing high-speed operation while supporting conventional single-supply or dual-supply circuit arrangements. The AD842 is identified as a closely related member of the same wideband, high-precision amplifier family. The manufacturer states that the AD842 is stable at a gain of two or greater and has at least 100 mA output-current drive, which is twice the 50 mA minimum drive stated for the AD841. The AD841 is unity-gain stable, making it the more direct choice when closed-loop gain near one is required. Fast settling is especially useful in pulse, waveform-generation, data-acquisition, and active-filter applications where reduced acquisition time can improve system throughput. Typical uses include video and imaging signal chains, precision current-to-voltage conversion, instrumentation interfaces, laboratory instrumentation, communications equipment, and analog signal-processing blocks. The 40 MHz bandwidth is suitable for moderate-frequency waveform conditioning, while the 300 V/µs slew rate helps maintain fidelity for rapidly changing signals. The 50 mA output drive also permits useful load current for downstream stages when voltage headroom remains adequate. When laying out an AD841SH circuit, keep feedback traces short, provide local supply bypassing, and avoid driving capacitive loads directly unless the load and stability conditions are verified. Because the AD841 is unity-gain stable, unity-gain feedback is appropriate for high-bandwidth buffer service; higher gain configurations offer more bandwidth per closed-loop stage and can improve signal-to-noise performance. This product record combines the AD841 family description, package and electrical characteristics, lifecycle-oriented sourcing information, selection guidance, and practical circuit considerations. It also separates confirmed manufacturer data from parameters that require confirmation from the ordering code, helping engineers evaluate the AD841SH before committing a high-speed analog design to production.
AD8420ARMZ - Micropower Rail-to-Rail In-Amp | Analog Devices
The Analog Devices AD8420ARMZ is a low-cost, micropower, wide-supply-range instrumentation amplifier with rail-to-rail output, housed in an 8-pin MSOP (RM-8) package. It operates over a single supply of 2.7 V to 36 V (or dual supplies up to ±18 V), draws only 90 µA typical quiescent current, and delivers 6 MHz bandwidth at G = 1. The AD8420ARMZ uses an indirect current-feedback architecture that allows it to amplify small differential signals in the presence of large common-mode voltages, including signals at or slightly below ground without requiring dual supplies. An instrumentation amplifier (INA) is a precision differential amplifier with high common-mode rejection ratio (CMRR), high input impedance, and user-settable gain - typically realized through one gain-setting resistor. INAs are specialized building blocks in the analog signal chain, sitting between a sensor (bridge, thermocouple, biopotential electrode) and an analog-to-digital converter. They belong to the broader amplifier-IC family and are widely used where small signals must be extracted in the presence of large common-mode noise or DC offsets. Key features of the AD8420ARMZ include 100 dB minimum DC CMRR (G = 100), a maximum input offset voltage of 250 µV, 30 nV/√Hz input voltage noise density, and ±18 V dual supply operation. The rail-to-rail output swing maximizes dynamic range when operating from low supply voltages, while the novel architecture eliminates the need for level shifting in single-supply designs. A single external resistor sets the gain from 1 to 1000, simplifying BOM and layout. Typical applications for the AD8420ARMZ include battery-powered sensor signal conditioning, ECG/biomedical front ends, industrial process-control transducers (pressure, strain gauge, load cell), and thermocouple/RTD amplifiers. The wide supply range and 90 µA quiescent current make it suitable for portable instrumentation, while ±18 V capability addresses industrial instrumentation. When designing with this part, place the gain-setting resistor close to the RG pin to minimize parasitic effects, use 0.1 µF decoupling capacitors at the supply pins, and follow proper PCB layout for high-CMRR performance (matched input traces, guard ring around inputs). For new designs consider the AD8421ARMZ (higher precision) or AD8237ARMZ (zero-drift) if your application demands tighter offset or lower noise.
AD8421ARZ - 3nV/√Hz Low Power In-Amp | Analog Devices
The AD8421ARZ is a low cost, low power, extremely low noise, ultralow bias current, high speed instrumentation amplifier from Analog Devices. It is ideally suited for a broad spectrum of signal conditioning and data acquisition applications. The device is available in an 8-lead SOIC package and operates over a supply range of 5V to 36V. Key specifications include a 3 nV/√Hz voltage noise density, a 60 µV input offset voltage, a 35 V/µs slew rate, and a 10 MHz bandwidth. The AD8421 is specified from -40°C to +85°C for the SOIC package. An instrumentation amplifier (in-amp) is a type of differential amplifier that has high input impedance and high common-mode rejection, making it ideal for measuring small signals in the presence of large common-mode voltages. It is a key building block in precision analog front ends, often used to amplify signals from sensors such as strain gauges, thermocouples, and medical electrodes. The AD8421 belongs to the family of precision instrumentation amplifiers, which are essential in applications requiring accurate, low-noise signal conditioning. Key features of the AD8421ARZ include its extremely low noise of 3 nV/√Hz, which is critical for high-resolution measurement systems, and its ultralow bias current, which minimizes errors when interfacing with high-impedance sources. The high speed of 10 MHz bandwidth and 35 V/µs slew rate allows it to capture fast transients, making it suitable for high-speed data acquisition. The device also features a reference pin for precise output offsetting, and it operates from a single or dual supply, providing design flexibility. Technically, the AD8421 uses a three-op-amp topology with laser-trimmed resistors to achieve high accuracy and stability. The input stage provides high common-mode rejection, while the output stage drives the load. The device is designed for low power consumption, making it suitable for battery-powered and portable applications. The SOIC package is widely used and easy to integrate into PCB designs. Typical applications include medical instrumentation, such as ECG and EEG monitoring, where low noise and high CMRR are essential. It is also used in industrial process control, precision data acquisition systems, and transducer interfaces. The AD8421's combination of low noise, low power, and high speed makes it a versatile choice for many precision analog applications. When designing with the AD8421, ensure proper supply decoupling with 0.1 µF capacitors close to the supply pins. The reference pin can be used to level-shift the output, which is useful in single-supply applications. Also, consider the input common-mode range to avoid saturation.
AD8421BRZ - 3nV/√Hz Low Power Instr Amp | Analog Devices
The Analog Devices AD8421BRZ is a low cost, low power, extremely low noise, ultralow bias current, high speed instrumentation amplifier in an 8-lead SOIC package. It is a single-circuit instrumentation amplifier that provides precision differential signal conditioning for a broad range of data acquisition, medical instrumentation, industrial process control, and sensor interface applications. The device combines a 3 nV/√Hz voltage noise density, 10 MHz bandwidth at G=1, and a low 2.3 mA quiescent current, making it suitable for both high-performance and power-sensitive precision systems. An instrumentation amplifier is a precision differential voltage gain stage with high input impedance, low offset voltage, and high common-mode rejection. It is the front-end building block used to amplify small differential signals that sit on large common-mode voltages, such as bridge outputs, thermocouple signals, and medical biopotentials. In the signal-chain hierarchy, an instrumentation amplifier sits between the sensor and the ADC, pairing with data converters and precision amplifiers to form complete measurement systems. Its ability to set the gain with one external resistor and reject common-mode interference makes it indispensable in precision analog applications. Key features of the AD8421BRZ include a 3 nV/√Hz voltage noise density at 1 kHz, 10 MHz bandwidth at unity gain, and an input bias current of 250 pA max. The device operates from a single supply of 5 V to 36 V or from dual supplies of ±2.5 V to ±18 V. The gain range is from 1 to 10,000 set by a single external resistor. The high CMRR of 126 dB at G=100 and low offset drift provide accurate measurement over temperature, while the −40°C to +85°C industrial temperature range supports robust system designs. From a technical standpoint, the AD8421 uses a precision three-op-amp topology with laser-trimmed resistors, enabling low offset, low drift, and excellent AC performance. The very low bias current reduces errors from high source impedances, while the high bandwidth supports high-speed sampling and control loops. The device is specified over the industrial temperature range for the 8-lead SOIC package. The reference pin allows precise offset adjustment, which is essential for unipolar ADC interfaces and bridge-sensor nulling. Typical applications include high-speed data acquisition systems, medical ECG and patient monitoring, precision weigh scales, current-sense amplification in motor controls, and sensor signal conditioning for industrial automation. The AD8421BRZ is also a favorable choice for test and measurement equipment where low noise and high CMRR directly affect measurement accuracy. When laying out the printed circuit board, place the gain-setting resistor as close as possible to the RG pins to minimize parasitic capacitance and gain errors. Decouple each supply pin with 0.1 µF ceramic capacitors to the ground plane. For best noise performance, keep the source impedances balanced and use guarded traces on high-impedance inputs.
AD8429ARZ - 1nV/√Hz Ultra-Low Noise In-Amp | Analog Devices
The AD8429ARZ is an ultralow noise, precision instrumentation amplifier from Analog Devices, designed for measuring extremely small signals over a wide temperature range of -40°C to +125°C. It delivers an ultralow input voltage noise of 1 nV/√Hz, making it ideal for high-resolution sensor and medical applications. The device is available in an 8-lead SOIC package and operates from dual supplies, providing excellent DC and AC performance. An instrumentation amplifier (in-amp) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is a specialized variant of an operational amplifier, optimized for high input impedance, high common-mode rejection ratio (CMRR), and precise gain setting with a single external resistor. In-amps are essential in precision measurement systems, bridging the gap between small sensor outputs and the input range of ADCs. Key features of the AD8429 include a fixed gain of 2000 with access to internal nodes for flexibility, low input voltage noise of 1 nV/√Hz, and high CMRR of 140 dB minimum. It also offers excellent DC accuracy with gain drift of 5 ppm/°C, offset drift of 0.3 µV/°C, and gain accuracy of 0.05%. The device operates over a wide supply range and is specified for -40°C to +125°C, ensuring reliable performance in harsh environments. The AD8429 uses a three-op-amp topology with laser-trimmed thin-film resistors, achieving high precision and stability. Its high CMRR increases with gain, effectively rejecting common-mode interference from power lines and other sources. The REF pin allows level shifting for single-supply operation, and the device is protected with ESD diodes on the inputs. Typical applications include precision data acquisition, medical instrumentation (ECG, EEG), strain gauge and bridge amplifiers, and industrial process control. The ultralow noise and high CMRR make it particularly suited for measuring microvolt-level signals in noisy environments. When designing with the AD8429, ensure proper grounding and shielding to minimize noise pickup. The REF pin should be driven with a low-impedance source (<1 Ω) for best performance, and input protection resistors may be needed for overvoltage conditions.
AD8429BRZ - 1nV/√Hz Ultra-Low Noise In-Amp | Analog Devices
The AD8429BRZ is an ultralow noise, precision instrumentation amplifier from Analog Devices, designed for measuring extremely small signals over a wide temperature range of -40°C to +125°C. It delivers an input noise of 1 nV/√Hz and output noise of 45 nV/√Hz, making it ideal for high-resolution data acquisition and sensor conditioning. The device operates from dual supplies of ±4 V to ±18 V and is available in an 8-lead SOIC package (SOIC-8). An instrumentation amplifier (in-amp) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is a specialized variant of the operational amplifier (op-amp) family, optimized for precision measurement applications where high common-mode rejection ratio (CMRR) and low noise are critical. In-amps are widely used in medical instrumentation, industrial process control, and precision data acquisition systems. Key features of the AD8429BRZ include a minimum CMRR of 90 dB at gain of 1, a maximum input offset voltage of 50 µV, and a maximum gain accuracy of 0.02% at gain of 1. It offers excellent AC specifications with 80 dB CMRR up to 5 kHz, a bandwidth of 15 MHz at gain of 1, and a slew rate of 22 V/µs. The total harmonic distortion (THD) is -130 dBc at 1 kHz, ensuring high signal fidelity. The AD8429 uses a three-op-amp topology with a precision laser-trimmed resistor network, achieving high accuracy and stability over temperature. The gain is set by a single external resistor, allowing gains from 1 to 1000. The reference pin (REF) enables level shifting for single-supply operation, and the device includes ESD protection on all pins. Typical applications include medical instrumentation (ECG, EEG), industrial process control, precision data acquisition, and transducer signal conditioning. The ultralow noise and high CMRR make it suitable for measuring microvolt-level signals in noisy environments. When designing with the AD8429BRZ, ensure proper supply decoupling with 0.1 µF capacitors close to the supply pins. The REF pin should be driven with a low-impedance source (<1 Ω) for best performance. The gain resistor should be placed close to the device to minimize parasitic capacitance.
AD842JN - 80MHz High-Speed Operational Amplifier | Analog Devices
Analog Devices AD842JN is a single wideband operational amplifier with an 80 MHz gain-bandwidth product, high output-current capability, and fast settling performance in a 14-pin PDIP package. It is designed for signal-conditioning circuits that require broad bandwidth, accurate amplification, and the ability to drive practical loads without a separate output-buffer stage. An operational amplifier is an analog signal-processing IC that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. Within the amplifier hierarchy, the AD842JN belongs to the precision operational-amplifier category, combines high DC precision with wideband AC performance, and operates as a building block in instrumentation, communications, and test systems. Key characteristics include an 80 MHz gain-bandwidth product, operation from dual supplies of plus or minus 5 V through plus or minus 18 V, and a minimum output-current drive of 100 mA. According to the manufacturer data sheet, the device uses Analog Devices' junction-isolated complementary bipolar process, combining DC precision with high-speed AC operation. Its minimum stable gain of two makes it particularly suitable for non-inverting gain stages operating above unity gain. The AD842's architecture supports instrumentation, video, communications, and pulse-processing applications. At higher closed-loop gains, the available bandwidth increases while the full-power bandwidth depends on slew rate and output-voltage amplitude. The device's short-circuit protection and thermal characteristics allow it to operate as a practical output stage in demanding analog systems, although external current limiting and careful thermal design remain necessary. Typical uses include high-speed current-to-voltage conversion, analog signal conditioning, active filtering, video amplification, communications-channel equalization, and laboratory instrumentation. The AD842JN is appropriate when a precision amplifier must combine high bandwidth with unusually strong output-current drive rather than operate only into a high-impedance measurement instrument. For stable operation, follow the manufacturer's minimum closed-loop gain requirement and preserve the recommended feedback topology. Place input, feedback, and decoupling connections to minimize parasitic capacitance, because excessive loading or incorrect compensation can produce ringing or instability. Account for supply headroom and output swing when driving low-impedance loads. This product data combines manufacturer specifications, package and pin information, sourcing guidance, and drop-in replacement analysis to support faster component selection and PCB-level implementation.
AD842KH - 80MHz Wideband High-Output Op Amp | Analog Devices
The Analog Devices AD842KH is a single-channel, wideband operational amplifier with an 80 MHz gain-bandwidth product at a gain of 2, 375 V/µs slew rate, and a TO-8-12 hermetic package. The device combines an 80 MHz gain-bandwidth product with settling to 0.01% after a 10 V step and a full-power bandwidth of 6.0 MHz for a 20 V peak-to-peak output. Its maximum input offset voltage is specified as 1 mV. An operational amplifier is a high-gain analog signal-conditioning component used to amplify voltage differences, buffer sensors, drive analog-to-digital converters, and implement active filters. The AD842 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. It is fabricated with Analog Devices' junction-isolated complementary bipolar process, combining dc precision with wideband ac performance. Key features include stable operation at gains of 2 or greater, an 80 MHz gain-bandwidth product, and 375 V/µs slew rate. The amplifier settles to within 0.01% following a 10 V step, making it useful in systems requiring rapid recovery after a large input transition. Its 6.0 MHz full-power bandwidth supports high-amplitude waveform amplification, while the 1 mV maximum input offset voltage supports accurate dc-coupled signal conditioning. The junction-isolated complementary bipolar architecture is designed to provide wideband operation while retaining low offset voltage. When configured for a gain of 2, the AD842 provides its specified 80 MHz gain-bandwidth product. The 375 V/µs slew rate supports high-frequency signal movement, and the 6.0 MHz full-power bandwidth applies to a 20 V peak-to-peak output. Engineers should use the manufacturer datasheet for gain, output-current, supply-voltage, noise, and stability limits before finalizing a circuit. Typical uses include video and imaging signal chains, waveform generation, data-acquisition front ends, high-speed instrumentation, and active analog filtering. The fast settling characteristic is particularly useful when the amplifier must recover quickly after a step input. The hermetic TO-8-12 package also makes the device suitable for legacy industrial, aerospace, and test systems where through-hole packaging and established qualification practices are important. The primary design consideration is stability at the selected closed-loop gain. Because the AD842 is stable at gains of 2 or greater, circuits should preserve that gain condition and account for parasitic capacitance, board routing, load capacitance, and power-supply decoupling. Short feedback paths, a compact ground return, and locally placed bypass capacitors help control high-speed feedback loops and reduce ringing. This page organizes the manufacturer's electrical characteristics, package information, practical application guidance, and same-package upgrade options into a design-focused reference. It also identifies where detailed operating conditions or alternative-device data require direct review of the AD842 datasheet before production release.
AD842KN - 80 MHz Wideband Current-Feedback Op Amp | Analog Devices
The Analog Devices AD842KN is a wideband, high-output-current operational amplifier built on the junction-isolated complementary bipolar, or CB, process. It combines an 80 MHz gain-bandwidth product with a 14-pin PDIP package, making it suitable for instrumentation, signal-conditioning, and pulse-processing circuits that require fast settling and low distortion. The AD842KN is designed for operation from dual ±5 V to ±18 V supplies, as identified in its product documentation. An operational amplifier is an active analog circuit that uses high open-loop gain and negative feedback to amplify a differential input signal. The AD842 belongs to the current-feedback amplifier family. Current-feedback amplifiers divide a high-gain stage into an inverting input and a non-inverting input, allowing the closed-loop bandwidth to remain relatively stable as closed-loop gain changes. Within the broader signal-chain hierarchy, the AD842 sits between general-purpose voltage-feedback amplifiers and dedicated instrumentation, buffer, and line-driver circuits. The AD842 family's main differentiators include its 80 MHz gain-bandwidth product, wideband operation, and ability to deliver comparatively high output current. These characteristics make it useful when driving moderate capacitance, driving low-impedance loads, or processing large-amplitude transient signals. Analog Devices identifies the CB process as the enabling technology for combining DC precision with wideband AC performance that was previously difficult to achieve in a monolithic operational amplifier. The device is available in a 14-pin PDIP package for through-hole PCB assembly. Because it is a high-speed bipolar amplifier, board construction and decoupling strongly affect usable performance. Short feedback traces, a clean ground plane, and local supply bypassing help preserve the intended settling behavior and minimize RF pickup. A feedback resistor should be selected to match the source impedance and the load being driven rather than treating the amplifier as a voltage-only generic part. Typical applications include laboratory instrumentation, current-to-voltage conversion, waveform conditioning, video and pulse-signal conditioning, and active analog filtering. It is particularly appropriate when the signal source is low impedance and the following stage requires a high-current output. The 14-pin through-hole package also simplifies prototype assembly and repair on laboratory or legacy industrial boards. When designing around the AD842KN, verify gain-bandwidth behavior for the selected closed-loop gain and confirm that the load current and capacitive loading remain within the device operating limits. Stable feedback components, balanced trace geometry, and separate analog return paths are more important than minimizing board area alone. The device should also be evaluated for overload recovery and output saturation if the expected input waveform can exceed the intended operating range. This page combines the manufacturer specifications, verified package information, pin-compatible family options, comparison data, and practical layout guidance so that engineers can evaluate the AD842KN against other wideband amplifiers before committing a design to production.
AD842SH - 80MHz Wide-Bandwidth Operational Amplifier | Analog Devices
Analog Devices AD842SH is a wide-bandwidth, single-channel operational amplifier with an 80 MHz gain-bandwidth product, 375 V/µs slew rate, and low input offset voltage. The device is specified for an 18 V maximum total supply voltage and is housed in a hermetic TO-8-style, 12-lead package for precision instrumentation and signal-conditioning applications. An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its inverting and non-inverting inputs while offering high open-loop gain and low output impedance. The AD842 belongs to the operational-amplifier hierarchy within amplifier ICs and power-management systems used for instrumentation, industrial control, communications, and high-speed analog signal acquisition. The AD842SH combines wide bandwidth with precision DC characteristics. Key ratings include 115 dB open-loop gain, 9 nV/√Hz input noise at 1 kHz, 1.5 mV maximum input offset voltage, and 14 µV/°C input offset drift. Its 375 V/µs slew rate supports accurate reproduction of high-frequency, large-amplitude signals, while the 8 µA input bias current is suitable for many high-impedance source designs. The amplifier is fabricated using Analog Devices' junction-isolated complementary bipolar process. This process combines DC precision with wideband AC performance. The 80 MHz gain-bandwidth product supports closed-loop bandwidth near 10 MHz when configured for a gain of 8, making the device useful where conventional precision op amps cannot preserve signal amplitude at higher frequencies. Typical uses include low-level instrumentation-amplifier front ends, precision signal conditioners, active filters, broadband measurement systems, and industrial analog interfaces. In a typical non-inverting or inverting amplifier, external resistors establish the closed-loop gain while the compensation capacitor selected for that gain controls frequency response and stability. Design the AD842SH around its supply limits, input common-mode range, output swing, noise bandwidth, and required gain. Keep sensitive input and feedback nodes short, use stable reference and gain resistors, and place compensation components close to the relevant pins. Verify thermal rise and output drive at the lowest expected supply voltage because both can limit large-signal performance. This page combines manufacturer specifications, package information, sourcing guidance, replacement considerations, and practical circuit-design notes. It helps engineers evaluate whether the AD842SH's 80 MHz bandwidth, 375 V/µs slew rate, 115 dB gain, and hermetic 12-lead TO-8 package satisfy a precision analog design before committing the component to a PCB or production BOM.
AD843JN - 34MHz CBFET Fast-Settling Op Amp | Analog Devices
The Analog Devices AD843JN is a single-circuit, fast-settling CBFET-input operational amplifier with 34 MHz small-signal bandwidth, 0.6 nA input bias current, and 135 ns settling time to within 0.01% of final value after a 10 V step. The device is offered in an 8-pin PDIP package for through-hole instrumentation and signal-conditioning applications. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The AD843 belongs to the high-speed voltage-feedback operational-amplifier family, combining low-noise FET input characteristics with wide closed-loop bandwidth. This makes it useful within the broader power-management and analog-signal-processing hierarchy wherever accurate, rapid response to small voltage signals is required. The AD843’s principal advantages include its 34 MHz bandwidth, 0.6 nA input bias current, and 135 ns settling performance. The CBFET input stage helps maintain very low input bias current, which is valuable when the source impedance is high and bias-current-induced errors must remain small. Its fast settling behavior is especially useful in pulse, measurement, buffering, and feedback-control systems that cannot tolerate long analog settling periods. The AD843 is part of the Analog Devices family of wide-bandwidth operational amplifiers and is intended for applications requiring both FET-like input behavior and rapid closed-loop response. The manufacturer describes the amplifier as suitable for instrumentation applications, low-impedance drive stages, video and image-processing circuits, and feedback loops where the 10 V settling specification is relevant. Its bandwidth also allows operation at lower closed-loop gains, subject to the stability and compensation guidance in the manufacturer datasheet. Typical uses include buffer amplifiers, instrumentation front ends, sample-and-hold interfaces, video signal conditioning, pulse shaping, and active filtering. In these systems, the AD843 can preserve small input signals, minimize source-loading error through its low bias current, and settle quickly after a large input transition. The 8-pin PDIP package is particularly appropriate for prototypes, educational platforms, legacy industrial equipment, and through-hole assemblies that require a socketed or manually assembled implementation. When laying out a circuit, keep the feedback path short and connect compensation, decoupling, and signal-ground components according to the manufacturer’s recommended topology. The power rails must satisfy the device’s operating limits, and unused input pins must be handled so they cannot collect noise or unintended signals. Because high-speed feedback circuits can oscillate, evaluate stability across the intended gain, load, and supply conditions rather than relying only on nominal bandwidth figures. This product page combines the manufacturer’s AD843 performance description with package information, application-oriented guidance, replacement analysis, and practical design guidance. It is intended to help engineers identify whether the 34 MHz bandwidth, 0.6 nA input bias current, 135 ns settling time, and 8-pin PDIP package meet their circuit and assembly requirements.
AD843KN - 34MHz Fast-Settling CBFET Op Amp | Analog Devices
The Analog Devices AD843KN is a fast-settling CBFET-input operational amplifier with 34 MHz unity-gain bandwidth, 250 V/µs slew rate, and 0.6 nA typical input bias current, housed in an 8-pin DIP package. Its low bias current supports high-impedance signal sources while the 34 MHz bandwidth and 3.9 MHz full-power bandwidth provide useful high-speed performance. A CBFET-input operational amplifier is a voltage-feedback amplifier whose input stage uses current-buffered FET devices. This amplifier category combines very low input bias current with wide bandwidth, placing the AD843KN between general-purpose precision amplifiers and specialist high-speed amplifier families. It is used within broader amplifier, signal-conditioning, and power-management systems where fast response and minimal input loading are more important than rail-to-rail input operation. The principal features of the AD843KN include 34 MHz unity-gain bandwidth, a 250 V/µs slew rate, and settling to within 0.01% of the final value in 135 ns for a 10 V step. It is stable at gains of one or greater, simplifying unity-gain buffering and noninverting amplifier designs. The typical input bias current is only 0.6 nA, while the maximum input offset voltage for the AD843K family is 1 mV. The AD843 datasheet describes excellent large-signal behavior and stable unity-gain operation. At a 5 MHz input frequency, the associated switching-device application reports crosstalk of -85 dB and isolation of -75 dB. These figures reflect the switching context rather than a standalone AD843 isolation specification, but they illustrate why the amplifier's bandwidth, input capacitance, and settling behavior must be considered together in fast signal paths. Typical uses include high-speed sample-and-hold systems, high-speed integrators, active filters, and high-frequency signal-conditioning circuits. The combination of 250 V/µs slew rate and 135 ns settling is particularly useful when the system must recover quickly after a large input transition. The 0.6 nA bias current also makes the device appropriate for sources whose output impedance makes input bias effects significant. Designers should use stable feedback networks at gains of one or greater, provide adequate supply bypassing, and route sensitive input and feedback connections to minimize parasitic capacitance. The operating supply limits and temperature grade should be checked in the Analog Devices AD843 datasheet before using the amplifier in a new design, especially where the negative supply approaches -5 V. This product page combines the AD843KN's principal electrical characteristics, package details, application guidance, comparison parameters, and replacement information into an engineering-focused selection resource. It also distinguishes true pin-compatible family variants from alternatives that require a different package or materially different electrical performance.
AD843SH - 34MHz CBFET Op Amp | Analog Devices
The Analog Devices AD843SH is a fast-settling, 34 MHz CBFET-input operational amplifier with 0.6 nA input bias current, 135 ns settling time to within 0.01% of final value for a 10 V step, and a TO-8-12 metal-can package. The device operates from -18 V to +18 V and is specified across -55°C to +125°C, making it suitable for precision, high-speed, and temperature-extreme analog signal chains. A CBFET-input operational amplifier is a voltage-feedback amplifier whose field-effect-transistor input stage provides very low input bias current while retaining wide signal bandwidth. This input architecture places the AD843 in the operational-amplifier hierarchy, where low bias current reduces disturbance in high-impedance sources while the amplifier provides gain, buffering, filtering, or level shifting. Key characteristics include a 34 MHz gain-bandwidth product, 135 ns settling time, 19 nV/√Hz input noise at 10 kHz, 250 V/µs slew rate, and 72 dB nominal common-mode rejection. Built-in compensation simplifies implementation, while the specified 2 µV/°C input-offset temperature coefficient supports stable operation over wide ambient-temperature ranges. The AD843's fast settling behavior is particularly important when a large input step must settle accurately before a subsequent sampling or conversion event. Its 10 V settling specification provides a clear, application-relevant criterion for evaluating acquisition systems. The CBFET input stage also supports use with high-impedance transducers where low input current is important, although the complete external circuit must still satisfy the amplifier's stability and loading requirements. Typical uses include precision pulse acquisition, high-speed instrumentation, photodiode and capacitance measurement front ends, waveform conditioning, and industrial or military test equipment. The -55°C to +125°C range makes the AD843SH appropriate where temperature variation must be considered, while its high-voltage, wide-bandwidth characteristics suit bipolar signal conditioning. PCB implementation should preserve short feedback paths and minimize parasitic capacitance around the high-impedance input nodes. Decoupling capacitors should be placed close to the supply pins, and unused or unused-function pins should be handled according to the manufacturer datasheet. Adequate input and output headroom must be checked at temperature because the 135 ns settling specification is not a substitute for stable operating conditions. This page combines the manufacturer's AD843 family specifications with package details, thermal-range information, application guidance, and verified drop-in replacement analysis. The comparison material is intended to support schematic review, footprint verification, and procurement planning rather than replacing the complete manufacturer datasheet.
AD843SQ/883B - 34MHz CBFET Fast Settling Op Amp | Analog Devices
The AD843SQ/883B is a fast settling, 34 MHz, CBFET input operational amplifier from Analog Devices, offered in a hermetic 8-pin CERDIP package. It combines the low input bias current of a FET input amplifier (0.6 nA typical) with a wide 34 MHz unity-gain bandwidth and a fast 135 ns settling time to 0.01% for a 10 V step. This device is designed for high-speed signal conditioning applications requiring both precision and speed. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used to perform mathematical operations like addition, subtraction, integration, and differentiation in analog circuits. Op amps are fundamental building blocks in analog electronics, forming the basis of filters, buffers, comparators, and instrumentation amplifiers. They are part of the broader category of linear integrated circuits, which also includes voltage regulators, comparators, and timers. Key features of the AD843SQ/883B include a 34 MHz unity-gain bandwidth, 135 ns settling time to 0.01%, and a slew rate of 250 V/µs (typical). The input offset voltage is 1 mV maximum for the K and B grades, and the input bias current is 0.6 nA typical. The device operates from a supply voltage range of ±4.5 V to ±18 V, and it is stable at gains of 1 or greater. The full power bandwidth is 3.9 MHz, and the device features ground pins between signal pins to reduce crosstalk, achieving -85 dB crosstalk at 5 MHz. The AD843 uses a CBFET (Complementary Bipolar FET) architecture, combining the low bias current of FET inputs with the high speed of bipolar transistors. This architecture provides excellent DC precision and AC performance, making it suitable for applications such as high-speed data acquisition, active filters, and video amplifiers. The device is specified over the military temperature range of -55°C to +125°C, and the /883B suffix indicates compliance with MIL-STD-883 Class B screening. Typical applications include high-speed instrumentation, pulse amplifiers, and video processing circuits. The fast settling time and low bias current make it ideal for sample-and-hold circuits and high-speed ADC drivers. The device's high slew rate and bandwidth also make it suitable for use in communication systems and radar signal processing. When designing with the AD843SQ/883B, ensure proper power supply decoupling with 0.1 µF ceramic capacitors close to the supply pins. The device's high bandwidth requires careful PCB layout to minimize parasitic capacitance and inductance. Also, note that the input common-mode range extends to within 2 V of the supply rails, so input signals should be kept within this range to avoid distortion.
AD844SQ - 60MHz 2000V/us Current Feedback Op Amp | Analog Devices
The Analog Devices AD844SQ is a 60 MHz, 2000 V/us monolithic current-feedback operational amplifier fabricated on Analog Devices' junction-isolated complementary bipolar (CB) process, housed in an 8-pin CERDIP package. The current-feedback topology decouples bandwidth from closed-loop gain: 60 MHz at gain of -1 and 33 MHz at gain of -10, with 2000 V/us slew rate and 20 MHz full-power bandwidth at 20 V pk-pk. The device also offers fast settling and low differential gain/phase error suitable for video applications. A current-feedback operational amplifier is a high-speed amplifier topology whose inverting input is a low-impedance emitter node rather than a high-impedance differential pair. This architecture lets the -3 dB bandwidth remain nearly independent of closed-loop gain, contrasting with voltage-feedback op-amps whose gain-bandwidth product is constant. Current-feedback op-amps sit in the broader category of high-speed amplifiers within the operational amplifier / amplifier IC family of analog signal-chain semiconductors. They are preferred when large-signal slew rate, high bandwidth at gain, and low distortion across frequency must coexist in one device. The AD844SQ also integrates a low-noise quad transistor useful for buffering and discrete gain stages. Key performance highlights include 60 MHz small-signal bandwidth at unity gain, 2000 V/us slew rate enabling fast large-signal response, and excellent dc precision. The AD844SQ's "S" grade indicates the standard military operating temperature range, and the "Q" suffix indicates the CERDIP package with screened processing. The 8-pin CERDIP (TO-99-equivalent) form factor is hermetic and qualified for harsh-environment and MIL-grade applications. Architecturally, the AD844SQ's current-mirror front end combined with a complementary-bipolar output stage lets the part drive heavy loads while maintaining low distortion. The on-board low-noise NPN/PNP quartet enables the AD844 to operate as an extremely low-noise, high-gain building block when wired as a discrete transistor front end, broadening the device's utility beyond a single op-amp function. Typical uses are RGB/composite video gain stages and cable drivers, high-speed instrumentation front ends, ADC input buffers, IF and baseband signal conditioning, ATE pin electronics, and high-impedance wideband buffers. The wide bandwidth and high slew rate also suit pulse amplifiers, waveform generators, and active filters. When designing with the AD844SQ, pay attention to feedback resistor selection: the datasheet recommends a specific Rfb value (typically around 1 kohm for gain-of-1 bandwidth) to maintain stability. Use a low-inductance ground return and a solid ground plane; current-feedback amplifiers are more sensitive to parasitic inductance than voltage-feedback parts. This page synthesizes distributor pricing, hermetic-package drop-in equivalents, and practical layout notes not found in the standalone datasheet, giving procurement and design engineers a single reference for sourcing and applying the AD844SQ.
AD844SQ/883 - 60MHz 2000V/µs Current Feedback Op Amp | Analog Devices
The Analog Devices AD844SQ/883 is a 60 MHz, 2000 V/µs monolithic current-feedback operational amplifier supplied in an 8-pin CERDIP through-hole package and qualified to MIL-STD-883 (Suffix Q indicates CERDIP, /883 denotes the military screening flow). It is fabricated on Analog Devices' junction-isolated complementary bipolar (CB) process and combines wide small-signal bandwidth with very fast large-signal response alongside strong DC precision, making it a classic choice for high-speed analog signal conditioning. A current-feedback op amp (CFA) is a high-speed amplifier topology in which the inverting input is a low-impedance node and the small-signal bandwidth is set primarily by the external feedback resistor, not by the closed-loop gain. CFAs therefore offer wider bandwidth at higher gains and faster slew rates than classic voltage-feedback amplifiers, at the cost of slightly higher input bias current at the inverting node. The AD844 is widely considered the canonical CFA reference part for video, pulse, and instrumentation designs. Key headline specifications include 60 MHz small-signal bandwidth at a gain of +1, 33 MHz bandwidth at a gain of +10, a slew rate up to 2000 V/µs, 20 MHz full-power bandwidth at 20 V pk-pk, fast settling on a 10 V step, and 2000 V/µs transient response. The /883B suffix designates parts processed to MIL-STD-883 Class B environmental screening, intended for military, aerospace, and high-reliability industrial programs. The device is internally compensated and uses external feedback resistors to set closed-loop gain. Its complementary-bipolar output stage can swing to within a few volts of each rail on standard ±15 V supplies, and DC precision is sufficient for many instrumentation paths. The CB process gives the AD844 the combination of bandwidth and DC accuracy that made it a long-running industry reference. Typical applications include wideband pulse and RF signal-chain building blocks, video line drivers and distribution amplifiers, high-speed current-to-voltage converters for photodiode and DAC outputs, fast sample-and-hold buffers, and military/aerospace signal-conditioning blocks where MIL-STD-883 screening is required. Designers use it wherever a single amplifier must deliver both DC accuracy and multi-MHz large-signal bandwidth. When designing with the AD844SQ/883, observe that optimum bandwidth is achieved with a feedback resistor of about 1 kΩ, and that the inverting input bias current is appreciably larger than on a precision VFA. Decouple each supply pin with a 0.1 µF ceramic plus a larger tantalum or electrolytic cap placed as close as possible to the package, and keep ground-return paths short to preserve settling performance. This page synthesizes distributor pricing, MIL-STD-883 screening notes, drop-in and pin-compatible same-package alternatives, and practical CFA design considerations not collected in a single place in the manufacturer datasheet.
AD848JR - 175MHz High-Speed Op Amp | Analog Devices
The Analog Devices AD848JR is a single, internally compensated, high-speed operational amplifier with a 175 MHz gain-bandwidth product, 300 V/s slew rate, and 4.8 mA supply current in an 8-pin SOIC package. The AD848 is stable in closed-loop gains of 5 or greater, allowing direct use in noninverting and inverting signal-conditioning circuits without an external compensation network. It operates from dual ±4.5 V to ±18 V supplies. A high-speed operational amplifier is a voltage-feedback amplifier designed to process signals with wide bandwidth, low delay, and fast amplitude transitions. Within the analog IC hierarchy, the AD848 belongs to the operational-amplifier and high-speed amplifier families, combining precision biasing, input stages, output drive, and frequency compensation in one monolithic semiconductor. Its gain of at least 5 makes it particularly useful for video, communications, instrumentation, and pulse-shaping stages requiring more bandwidth than general-purpose precision amplifiers provide. The principal performance features are a 175 MHz gain-bandwidth product, 300 V/s slew rate, and 4.8 mA supply current. The amplifier settles to 0.1% in 80 ns for a 10 V step, making it useful for waveform capture, pulse amplification, and video gain stages. Its input noise density is listed as 3 nV/√Hz, supporting low-noise high-frequency signal conditioning when appropriate source impedance and bandwidth are maintained. The AD848 uses internal compensation optimized for closed-loop gains of 5 and above. This is an important architectural distinction from decompensated amplifiers that require higher closed-loop gain. The device is positioned for designers who need substantial operating bandwidth without external compensation and who can accept the minimum-gain constraint. The manufacturer also identifies the AD848 as an enhanced replacement for the LM6164 series and as a pin-for-pin replacement for several high-speed amplifiers in gains of 5 or greater. Typical applications include video preamplification, high-speed instrumentation, communications receive chains, active filtering, pulse shaping, and analog signal conditioning. It can also serve as a high-speed comparator-like stage when operated in its stable gain region, although feedback, bandwidth, and output-swing requirements remain critical. In systems requiring less than unity or gains below 5, the AD849's decompensated architecture or a unity-gain-stable amplifier should be evaluated instead. Designers should preserve the minimum closed-loop gain of 5, route feedback components close to the device, and verify capacitive-load stability at the intended gain. Input and output decoupling should follow the manufacturer datasheet recommendations. Power-supply bypassing is particularly important in high-speed systems because supply ripple can couple into the output and compromise settling performance. This product page combines manufacturer specifications, package and pin information, practical circuit guidance, structured comparisons, and verified substitute information. It is designed to help engineers identify whether the AD848JR's gain stability, bandwidth, power consumption, and 8-pin SOIC footprint fit a new design or replacement requirement.