بەرهەمەکان (3,200+)

AD526BDZ - 4 MHz Programmable Gain Amp | Analog Devices
AD526BDZ

AD526BDZ - 4 MHz Programmable Gain Amp | Analog Devices

The Analog Devices AD526BDZ is a single-ended, monolithic software-programmable gain amplifier (SPGA) with gains of 1, 2, 4, 8, and 16, a 4 MHz -3 dB bandwidth, and a 24 V/µs slew rate. The device is packaged in a 16-lead ceramic dual in-line package (16-CDIP) and is designed for instrumentation and signal-conditioning systems requiring digital control of analog gain. A software-programmable gain amplifier is a precision analog signal-conditioning device whose gain is selected by digital control signals. In the product hierarchy, an SPGA is a specialized amplifier IC that combines an operational amplifier, a precision resistor network, and digital gain-control logic. This integration allows one amplifier to replace multiple fixed-gain stages while supporting calibration, attenuation, range selection, and programmable measurement systems. The AD526BDZ provides five binary gain selections of 1, 2, 4, 8, and 16. Its TTL-compatible latched inputs allow a microcontroller, parallel interface, or other digital controller to establish the operating gain. Because the amplifier, resistor network, and latched control circuitry are integrated on one monolithic IC, the device requires no external components. This simplifies implementation while reducing the number of discrete precision resistors and switching networks normally required in variable-gain front ends. The AD526 family combines a 4 MHz -3 dB bandwidth with a 24 V/µs slew rate, allowing the amplifier to process signals substantially faster than a low-frequency precision measurement amplifier. Its specified input bias current is 50 pA and input offset voltage is 250 µV. These characteristics make it useful in data-acquisition front ends, sensor signal conditioning, laboratory instrumentation, industrial measurement systems, and analog-to-digital converter input stages. Operation is supported from ±4.5 V to ±16.5 V, corresponding to a total supply span of 9 V to 33 V, and the specified temperature range is -40°C to +85°C. The wide bipolar supply range supports conventional analog and industrial systems while providing headroom for input and output signal excursions. The manufacturer lists the AD526BDZ as active and specifies it for tube packaging in the distributor record. For implementation, connect the analog input to the appropriate signal and return terminals, drive the latched gain-control inputs with compatible logic, and operate the supply rails within the specified limits. Because the gain-control inputs are latched, account for the latch timing when changing gain in a sampled measurement system. Check the input and output operating ranges against the selected gain and supply voltage before applying large signals. This product page combines the AD526 family gain architecture, operating specifications, package information, sourcing guidance, comparison criteria, and practical design notes into a compact engineering reference. It also identifies verified drop-in alternatives while distinguishing package, electrical, lifecycle, and application-selection considerations.

RFQ پەیوەندی
AD526CD - 16-Ceramic-DIP Programmable Gain Amplifier | Analog Devices
AD526CD

AD526CD - 16-Ceramic-DIP Programmable Gain Amplifier | Analog Devices

The Analog Devices AD526CD is a single-ended monolithic software-programmable gain amplifier (SPGA) with selectable gains of 1, 2, 4, 8, and 16, packaged in a 16-pin ceramic DIP. The device integrates the amplifier, resistor network, and TTL-compatible latched inputs, so it requires no external gain-setting components. This combination makes the AD526CD useful for instrumentation systems that need controlled analog gain selected by digital logic rather than a mechanical switch or external resistor network. A programmable gain amplifier is an amplifier whose gain can be changed through control inputs while the signal path remains active. In the broader hierarchy, an SPGA is an amplifier IC, while the AD526CD also belongs to the programmable-gain-amplifier and analog signal-conditioning categories. Its integrated resistor network simplifies gain selection and reduces the number of external components needed in measurement front ends. TTL-compatible latched inputs allow the selected gain to be held while the circuit is used in a larger control system. The AD526 family provides five standard gain selections: 1, 2, 4, 8, and 16. These binary-selectable ratios are useful when an instrument must accommodate several input ranges with one analog front end. The monolithic implementation places the amplifier and gain network on one integrated circuit, while the latched digital interface supports controlled gain changes from a host controller, measurement system, or instrument bus. The AD526CD is identified specifically as a 16-CDIP package, making it suitable for applications that use ceramic DIP rather than surface-mount assembly. The AD526CD is designed as a complete analog gain-conditioning element. Its single-ended architecture accepts a single input signal and produces a conditioned output with the selected gain. Because the gain-setting network is integrated, designers do not need to calculate, match, or install external feedback resistors for the supported gain choices. The TTL-compatible latched inputs provide a straightforward digital control interface, but input levels, timing, and grounding still require careful treatment in a practical circuit. Typical uses include industrial process measurement, laboratory instrumentation, sensor signal conditioning, data acquisition, and test equipment. In a process-control input module, the AD526CD could normalize signals arriving from sensors with different operating ranges before conversion by an ADC. In laboratory equipment, the five available gains help the same amplifier front end handle multiple measurement scales without manually changing analog hardware. The ceramic DIP package also supports prototyping, educational instruments, and legacy control systems that use through-hole assembly. For implementation, place the device close to the signal source and maintain a low-impedance reference and ground arrangement. Digital gain-control traces should be managed so switching activity does not couple into the high-impedance analog input path. Confirm the power-supply requirements, input and output voltage limits, settling behavior, and acquisition timing from the manufacturer datasheet before finalizing the surrounding circuit. This page also organizes the device’s gains, package, control interface, application role, and sourcing information for faster engineering review.

RFQ پەیوەندی
AD526CDZ - Programmable Gain Amplifier | Analog Devices
AD526CDZ

AD526CDZ - Programmable Gain Amplifier | Analog Devices

The Analog Devices AD526CDZ is a single-ended, monolithic software-programmable gain amplifier (SPGA) with digitally selected gains of 1, 2, 4, 8, and 16, a 4 MHz bandwidth, and a 16-CDIP package. The device operates from dual ±4.5 V to ±16.5 V supplies and is specified over a -40°C to +85°C temperature range. Its integrated amplifier and resistor network eliminate the external gain-setting components normally required by a conventional PGA. A software-programmable gain amplifier is a mixed-signal amplifier that uses digital control signals to select a predetermined gain. In the signal-chain hierarchy, the AD526 belongs to programmable-gain amplifiers, a specialized category of amplifier ICs used for instrumentation, industrial measurement, and data-acquisition systems. By changing gain through latched digital inputs rather than switching external resistors, it simplifies control and reduces the number of discrete components required around the amplifier. The AD526CDZ provides five binary gain settings and uses TTL-compatible latched control inputs. Maximum gain error is 0.02% for the C grade at a gain of 1 and 0.5% at a gain of 16. Its 24 V/µs slew rate supports accurate reproduction of changing input waveforms. Two-chip cascade operation extends the binary gain range to 256, allowing a higher overall gain while retaining the digital gain-control architecture. The AD526 integrates the amplifier and resistor network into one monolithic implementation. Because the gain network is internal, the circuit does not require external gain-setting resistors. The manufacturer identifies the C-grade part as offering a maximum gain error of 0.02% at a gain of 1, while the maximum error rises to 0.5% at a gain of 16. This increasing error with gain is important when interpreting the overall accuracy of a high-gain measurement chain. Typical uses include programmable sensor-signal conditioning, laboratory instrumentation, industrial process measurement, and analog data-acquisition systems. The AD526 is particularly useful when a controller must adjust signal amplitude for inputs spanning several orders of magnitude. Its binary 1-to-16 gain range can be combined with an external attenuator or front-end stage when wider control is required. Layout should preserve short analog input paths, a low-impedance reference or driver path, and clean digital control traces. Mount the device close to the source of the input signal to minimize parasitic capacitance and susceptibility to noise. Confirm the digital-control state before sampling the analog output, because the latched gain setting changes the transfer function and may create a transient during programming. This page consolidates the AD526 family specifications, exact-package alternatives, programming considerations, and application guidance into an engineering-focused resource. It also distinguishes pin-compatible variants from functional or cross-package options, helping engineers evaluate replacements before changing a 16-CDIP circuit board.

RFQ پەیوەندی
AD526JNZ - Software PGA, 1-16x Gain | Analog Devices
AD526JNZ

AD526JNZ - Software PGA, 1-16x Gain | Analog Devices

The Analog Devices AD526JNZ is a single-ended, monolithic software programmable gain amplifier with selectable gains of 1, 2, 4, 8, and 16, a bandwidth of 4 MHz, and a 16-pin PDIP package. It integrates a BiFET amplifier, a laser-trimmed resistor network, JFET analog switches, and TTL-compatible latched gain-control inputs. A software programmable gain amplifier, or SPGA, is an amplifier whose gain can be selected through digital control signals. It sits between the instrumentation-amplifier and operational-amplifier categories, allowing a system to attenuate or amplify a small analog input without changing external resistors. The AD526JNZ supports automatic range control, signal conditioning, measurement systems, and instrumentation where several input levels must share one analog processing chain. The AD526JNZ provides five binary gain selections covering a 1-to-16 multiplication range. Gain is stored in latches, so the selected setting can remain stable while the analog signal is processed. Its monolithic implementation combines the amplifier and precision resistor network on one IC, while TTL-compatible gain-code inputs simplify interfacing with digital control logic. The 4 MHz bandwidth supports signal paths that require useful bandwidth beyond low-frequency precision measurements. Internally, the AD526 uses a drift-trimmed BiFET amplifier with low input bias current, a laser-trimmed resistor network for gain accuracy, and JFET analog switches to select the active resistance. These elements implement the five gain modes without requiring external matched resistors or discrete switch networks. Because the gain code is latched, the control inputs do not need to remain actively driven after a valid code is stored. Typical uses include programmable sensor-frontend scaling, laboratory measurement equipment, automatic-range data acquisition, industrial process monitoring, and communications equipment that accepts signals over a wide dynamic range. Placing the AD526JNZ ahead of an ADC can reduce the likelihood that a large input saturates the converter while preserving resolution for smaller signals. The principal design consideration is digital-control timing. Firmware must set the latched gain code before the analog signal is sampled, and the circuit should avoid changing gain while a conversion is in progress. Power-supply decoupling, grounding, and signal-routing practices also remain important because the AD526JNZ is designed as a sensitive analog block within an otherwise digital system. This page combines the AD526JNZ product identity, programmable-gain architecture, verified ordering information, replacement considerations, application guidance, and engineering design notes. It is intended to help engineers evaluate signal-conditioning requirements before integrating the amplifier into a PCB.

RFQ پەیوەندی
AD526SD - 1, 2, 4, 8, 16 Gain SPGA | Analog Devices
AD526SD

AD526SD - 1, 2, 4, 8, 16 Gain SPGA | Analog Devices

The Analog Devices AD526SD is a single-ended, monolithic software-programmable gain amplifier providing five selectable gain values of 1, 2, 4, 8, and 16. It combines the amplifier, precision resistor network, and TTL-compatible latched digital inputs in a 16-lead CDIP package, so no external gain-setting resistors are required. The device accepts a single-ended input and provides an analog output suitable for instrumentation, data acquisition, and industrial control systems. A software-programmable gain amplifier, or SPGA, belongs to the operational-amplifier and analog signal-conditioning hierarchy. It combines a closed-loop amplifier with selectable internal feedback ratios selected by digital control logic. This integration makes gain changes repeatable and reduces board area compared with a discrete amplifier and switched-resistor network. The AD526SD is therefore useful when a system must adjust measurement range according to changing sensor or input conditions. The AD526 family offers programmable gains of 1, 2, 4, 8, and 16. Its latched inputs allow the selected gain to remain stable after the control word is applied, which is important for multiplexed measurement systems. TTL-compatible logic levels simplify connection to microprocessor, microcontroller, or programmable-logic control circuitry. Because the amplifier, resistor network, and digital interface are integrated in one package, the design does not require external matched resistors or gain-setting components. The monolithic construction supports compact analog signal conditioning while preserving the normal precision behavior associated with an integrated resistor network. The device is intended for single-ended input signals, so system designers should use suitable input protection and referencing when the source can exceed the amplifier's specified operating limits. Digital control should be changed while maintaining valid power-supply conditions, and the selected latch state should be allowed to settle before the analog output is measured. Typical applications include programmable instrumentation amplifiers, data-acquisition front ends, industrial sensor interfaces, medical instrumentation, and laboratory measurement systems. It is particularly useful when a single analog input must be scaled across several ranges without replacing external resistors. In such systems, the AD526SD can be placed near the source to condition the signal before routing it into an ADC, provided the complete signal chain satisfies the manufacturer's grounding and stability requirements. The principal design consideration is to treat the digital gain interface and analog signal path as one precision circuit. Keep the input and output routing compact, provide a stable reference and supply arrangement, and observe the required bypass recommendations in the manufacturer datasheet. When choosing a replacement, verify the exact gain table, temperature grade, package material, pin assignment, and electrical limits rather than relying only on the AD526 family name. This page organizes the AD526SD's gain-control capabilities, package information, procurement path, alternatives, and application guidance into one engineering reference. It also distinguishes exact same-footprint replacement candidates from broader functional comparisons so engineers can assess board-level compatibility before redesigning an existing instrument.

RFQ پەیوەندی
AD5272BRMZ-20-RL7 - 20kOhm 1024-Tap I2C Digital Rheostat | ADI
AD5272BRMZ-20-RL7

AD5272BRMZ-20-RL7 - 20kOhm 1024-Tap I2C Digital Rheostat | ADI

The Analog Devices AD5272BRMZ-20-RL7 is a single-channel, 1024-position digital rheostat (nonvolatile digital potentiometer) with 20 kOhm nominal end-to-end resistance, housed in a 10-pin MSOP (RM suffix) package supplied on a 7-inch reel. According to the ADI AD5272/AD5274 datasheet, the device integrates industry-leading variable resistor performance with 50-times-programmable (50-TP) nonvolatile memory (NVM), allowing the wiper position to retain its setting across power cycles. A digital rheostat (sometimes called a digital potentiometer or digipot) is a solid-state replacement for a mechanical potentiometer, providing a programmable two-terminal variable resistor that is controlled through a digital serial bus. It belongs to the broader family of programmable analog ICs sitting between passive components (resistors) and full data-acquisition chains, and is widely used where mechanical trimming is impractical: in calibration, gain setting, sensor linearization, and bias adjustment. Key features include 1024 tap points, 1% end-to-end resistor tolerance error, a 2.7 V to 5.5 V single-supply operating range, an I2C-compatible 2-wire serial interface supporting both standard (100 kHz) and fast (400 kHz) modes, and 50-times programmable nonvolatile memory with read-back. The rheostat mode (terminal W to terminal A or B) supports unipolar signal swing, and the device includes power-on preset to midscale. In terms of architecture, the AD5272 uses a CMOS resistor-array structure with a wiper that is digitally addressed and latched into NVM via the I2C bus. The 50-TP architecture provides a controlled write budget to ensure long-term data retention in EEMEM. Compared with purely volatile digipots, the integrated EEMEM eliminates the need for an external EEPROM and a separate programming step on every power-up. Typical applications include mechanical potentiometer replacement, instrumentation gain adjustment, programmable voltage-to-current conversion, laser-trim replacement, and RF attenuator biasing. The combination of 1% resistor tolerance and 50-TP NVM makes the part especially attractive where calibration is performed once at production and then re-used across multiple power cycles. When designing with the AD5272, observe the absolute-maximum terminal voltages (Vdd + 0.3 V and -0.3 V on W/A/B). For ac-coupled or bipolar signals, bias the rheostat inside the supply headroom. For best noise performance, use the lower-resistance variants or connect an external resistor in parallel only when the design explicitly accounts for the resulting ratiometric error. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the AD5272/AD5274 datasheet that are not consolidated on any single distributor page.

RFQ پەیوەندی
AD532JDZ - 4-Quadrant Multiplier/Divider | Analog Devices
AD532JDZ

AD532JDZ - 4-Quadrant Multiplier/Divider | Analog Devices

The Analog Devices AD532JDZ is an internally trimmed, four-quadrant integrated-circuit multiplier/divider housed in a 14-lead ceramic DIP package. It performs one multiplication or division function and supports supply voltages from ±10 V to ±18 V. Its specified slew rate is 45 V/µs, and the commercial-temperature grade is specified for operation from 0°C to +70°C. An analog multiplier/divider is an integrated circuit that performs mathematical operations on continuously varying voltages. Unlike digital calculation performed by a microcontroller, this component operates directly with analog signals. The AD532 family belongs to the broader signal-conditioning hierarchy of analog multipliers, analog dividers, function converters, and precision analog ICs. Its four-quadrant behavior supports multiplication and division across positive and negative signal combinations. The AD532JDZ provides one multiplier/divider, three internal amplifiers, and a 14-CDIP package identified by the TO-116 case style. Internally trimmed construction is intended to reduce the need for external calibration of the multiplier core. These features make the device useful when an analog control path needs proportional calculation, signal scaling, or division without converting the measured quantity into a digital representation. The AD532JDZ is specified for ±10 V to ±18 V supply operation and a 45 V/µs slew rate. Those operating limits define the usable bandwidth and settling behavior of circuits built around the device. As an analog multiplier/divider, its practical accuracy also depends on input levels, resistor ratios, frequency content, supply stability, component tolerances, and circuit layout. The manufacturer datasheet should remain the controlling reference for gain accuracy, input impedance, bandwidth, and noise limits before a production design is released. Typical uses include analog multiplier and divider circuits, squaring and square-root functions, algebraic computations, control-loop modulation, servo systems, laboratory instrumentation, and industrial signal-processing equipment. The ceramic DIP construction can also simplify insertion into older through-hole instrument and control hardware. Because Analog Devices marks the AD532 family as not recommended for new designs, it is best treated as a maintenance or redesign component rather than the default choice for a fresh platform. Designers should verify the 14-lead pin assignment, observe the ±10 V to ±18 V supply limits, and maintain signal levels within the multiplier core's linear operating region. Zero-impedance feedback paths must follow the manufacturer's reference topology because excessive impedance can degrade bandwidth and stability. Input and output compensation networks should be placed close to the device, and unused inputs should be returned to an appropriate defined potential rather than left floating. This product page combines lifecycle guidance, package information, operating limits, application analysis, and qualified same-family alternatives. It is intended to help engineers identify the AD532JDZ for legacy or maintenance work while planning a controlled transition to a currently recommended multiplier/divider for new designs.

RFQ پەیوەندی
AD532JHZ - 4-Quadrant Analog Multiplier | Analog Devices
AD532JHZ

AD532JHZ - 4-Quadrant Analog Multiplier | Analog Devices

The Analog Devices AD532JHZ is an internally trimmed, four-quadrant integrated circuit multiplier designed for analog signal processing and instrumentation. It operates from dual supplies of ±15 V and is offered in a 10-pin TO-100 package. Its monolithic construction, internal trimming, and four-quadrant operation allow accurate product or quotient calculations without the external trim networks required by earlier modular multiplier designs. An integrated circuit analog multiplier is a precision signal-processing component that multiplies two input voltages and produces an output proportional to their product. When used in a feedback arrangement with an analog divider, it can also perform division, squaring, root extraction, modulation, demodulation, and signal generation. The AD532 belongs to the broader analog multiplier and divider hierarchy within analog integrated circuits, where precision linear signal processing complements general-purpose amplifier functions. The AD532JHZ combines four-quadrant operation with internal calibration. Four-quadrant capability means the product output can change polarity as either input crosses zero, a requirement for many modulation and control systems. Internal trimming reduces assembly complexity by eliminating external adjustment networks while preserving the factory-calibrated characteristics of the monolithic device. Its dual ±15 V supply also provides sufficient headroom for bipolar analog signals commonly encountered in laboratory and industrial control equipment. The AD532 is specified at 25 °C with ±15 V supply rails and a minimum load resistance of 2 kΩ. These conditions are important when evaluating signal loading, output range, and accuracy because performance and usable output swing depend on the circuit configuration. The device is intended for precision multiplier and divider circuits, including analog control loops, measurement bridges, instrumentation channels, and modulation systems. Typical uses include analog computation modules, laboratory measurement systems, industrial process-control equipment, and communication-signal processing. In each case, the AD532JHZ can implement multiplication directly and division through a closed-loop arrangement. Designers should account for supply polarity, input and output signal ranges, load impedance, grounding, and frequency-dependent accuracy when planning the surrounding analog network. A primary design consideration is preserving the common reference and feedback-node behavior of the multiplier circuit. Incorrect grounding, inadequate return paths, or loading that violates the minimum 2 kΩ load condition can degrade performance. The 10-pin TO-100 package also requires adequate clearance and suitable thermal management because a through-hole package can be exposed to elevated internal temperature at sustained high dissipation. This page combines manufacturer product information, technical search results, package details, lifecycle status, pricing evidence, and practical selection guidance. It also distinguishes genuine pin-compatible AD532 family alternatives from broader analog multipliers that may offer similar functions but cannot be assumed to share the same footprint or pinout.

RFQ پەیوەندی
AD532KDZ - 4-Quadrant IC Multiplier/Divider | Analog Devices
AD532KDZ

AD532KDZ - 4-Quadrant IC Multiplier/Divider | Analog Devices

The Analog Devices AD532KDZ is an internally trimmed, monolithic integrated circuit multiplier/divider in a 14-pin ceramic dual-in-line (TO-116) package, used for multiplication, division, squaring, square-rooting and algebraic computation. It operates from a +10 V to +18 V single supply and draws about 6 mA of operating supply current, with a rated slew rate of 45 V/us and RoHS-compliant gold-plated contacts. An analog multiplier/divider is a signal-processing IC that computes the product of two analog input voltages. Unlike a digital multiplier running on a microcontroller, it resolves the multiplication continuously, in real time, and at analog signal-chain speed, so it can modulate, demodulate, control, or compute without an ADC/DAC round trip. In the product-type hierarchy, AD532KDZ sits as an analog multiplier/divider, which is a functional subclass of analog signal-processing IC and amplifier IC. Key features of the AD532KDZ include four-quadrant operation, on-chip trim that eliminates external trim potentiometers and resistors, and K-grade accuracy. The device accepts bipolar inputs and produces scaled analog outputs, making it useful where an analog computation replaces a cascade of op-amps, multipliers, and dividers. Because trimming is internal, temperature and long-term drift stay tighter than a discrete multiplier network, and board area is reduced compared with discrete implementations. Technically, the AD532 is built around a Gilbert-style multiplier core with a differential input stage, a precision reference and trimming network, and output amplifiers that scale the product by the external scale-factor resistor and reference voltage. The AD532KDZ is specified over a supply range of 10 V to 18 V, which suits classic +/-15 V bench and legacy industrial analog systems. Analog Devices lists the AD532 as NOT RECOMMENDED FOR NEW DESIGNS, so it is best used for repair, maintenance, and legacy instrument support rather than new platform development. Typical applications include analog computation blocks in process control, aircraft and navigation test equipment, servo multipliers, and instrumentation where analog algebra is required. A single AD532KDZ can replace several precision op-amps and associated trim networks, reducing component count and drift in the analog path. A key design consideration is that the AD532KDZ is a legacy hermetic-style ceramic DIP part supplied in a through-hole 14-pin footprint, so PCB layout must accommodate 0.300 in pin pitch and adequate clearance for the larger ceramic body. Because the part is not recommended for new designs, verify the accuracy grade, supply rails, and reference components against the manufacturer datasheet before committing a design, and use the Request a Quote form on this page for availability and lead time. This page combines lifecycle status, supply and packaging detail, drop-in alternative options, and practical design notes that are not consolidated on a simple distributor listing, helping engineers sustain legacy analog designs and plan orderly migration to current multiplier products.

RFQ پەیوەندی
AD532KHZ - 4-Bit, 1 MHz Analog Multiplier | Analog Devices
AD532KHZ

AD532KHZ - 4-Bit, 1 MHz Analog Multiplier | Analog Devices

The Analog Devices AD532KHZ is an internally trimmed, 4-quadrant analog multiplier/divider with 1 MHz bandwidth, packaged in a hermetically sealed 10-pin TO-100 metal can. It performs multiplication and division of analog signals through balanced, precision-matched circuitry. The four-quadrant architecture supports operation across both input polarities, making the device useful in modulation, control, signal-conditioning, analog-computation, and instrumentation systems. An analog multiplier is a specialized amplifier or integrated circuit that produces an output proportional to the product of two input voltages. Its functional hierarchy extends from analog multiplier to analog computing IC, signal-processing IC, and integrated circuit. A divider operation can be implemented by placing a resistor in the feedback path of the multiplier, allowing one input to establish a scaling ratio while the other supplies the signal being scaled. The AD532KHZ combines a 4-bit resolution classification with 1 MHz bandwidth and internal trimming. Internal trimming reduces the need for external calibration of multiplier accuracy, while the hermetic TO-100-10 package supports operation in demanding industrial and legacy instrumentation environments. Its primary electrical characteristics are specified in the Analog Devices manufacturer datasheet, including gain accuracy, linearity, bandwidth, supply requirements, input ranges, and temperature behavior. Analog Devices identifies AD532 as not recommended for new designs, so the part should be selected primarily for repair, continuation, or redesign of an existing AD532-based circuit. Hermetic packaging and stable multiplication characteristics remain valuable where an established circuit footprint, test methodology, or qualified supply chain is required. Before replacing the device, verify the original grade suffix, operating temperature range, supply voltage, pin orientation, and external resistor network. Typical uses include four-quadrant multipliers in analog control loops, precision dividers in feedback networks, amplitude-control circuits, synchronous demodulation stages, and laboratory instrumentation. The 1 MHz bandwidth supports signal chains operating well above audio frequency, although practical system bandwidth also depends on the external resistor network, source impedance, load, and compensation or trimming components. The primary design consideration is to reproduce the original application circuit rather than redesign around generic equations. Maintain the manufacturer-specified bypass capacitors, resistor tolerances, pin connections, and grounding arrangement. The TO-100 package requires adequate lead-bend clearance and PCB spacing, and its thermal performance depends on the board-level copper area and airflow. This page combines the device identity, package information, lifecycle status, verified source links, drop-in candidates, and engineering guidance needed to evaluate the AD532KHZ for maintenance and controlled redesign applications.

RFQ پەیوەندی
AD534JDZ - Precision 4-Quadrant Multiplier | Analog Devices
AD534JDZ

AD534JDZ - Precision 4-Quadrant Multiplier | Analog Devices

The Analog Devices AD534JDZ is a production, internally trimmed precision IC multiplier and divider with four-quadrant operation, programmable gain and scale factor, and built-in voltage-division and reciprocal functions. The AD534JDZ is packaged in a 14-pin ceramic dual-inline package and is identified by Analog Devices as the RoHS-compliant, lead-free counterpart of the AD534JD. Its monolithic construction combines an internal reference, laser-trimmed scaling elements, and a high-gain output stage in one analog signal-processing device. An analog multiplier is an integrated circuit that computes the product of two voltage signals. When one input is held at a constant reference, the same circuit can also perform division, reciprocal calculation, gain control, and voltage scaling. In the AD534, an on-chip buried Zener reference and laser trimming establish an overall scale factor of 10 V. The difference between the XY/SF and Z signals is then applied to the high-gain output amplifier, allowing the product or division result to be referenced accurately to the internal reference. The AD534 family supports four-quadrant operation, meaning multiplication can handle input signals that change polarity rather than being limited to one positive and one negative quadrant. This makes the device useful in analog signal-processing systems where both polarities carry information. Its built-in voltage-division and reciprocal operations reduce the number of external arithmetic networks required for control, instrumentation, and feedback calculations. Programming the gain and scale factor allows a system designer to adapt the AD534 to different signal ranges. In an analog-computer or control loop, the multiplier can combine a command variable with a feedback variable. In measurement systems, it can provide analog scaling between sensor outputs and downstream converter inputs. The internal reference also reduces the need for an external precision reference when the circuit operates around the AD534's calibrated scale factor. The AD534JDZ is offered in a 14-pin CDIP package for through-hole industrial and instrumentation assemblies. Analog Devices describes the family as internally trimmed precision IC multiplier/divider technology, using laser trimming to achieve stable scale-factor performance. The device is intended for analog computation, control, feedback, signal-processing, and precision instrumentation circuits rather than high-speed digital conversion. When designing around the AD534JDZ, check the complete pin description, recommended input and output ranges, bandwidth, scale-factor error, and supply limits in the Analog Devices AD534 datasheet. Resistor and trim networks should be arranged to minimize parasitic resistance and thermal gradients because multiplier accuracy depends on matched scaling paths and stable references. Stable bypass and grounding practices are also important when the output drives sensitive measurement or control circuitry. This page consolidates the exact AD534JDZ package, production status, functional characteristics, verified RoHS and lead-free information, drop-in candidates, application guidance, and engineering comparison notes. It is designed to help engineers identify the correct multiplier, understand its four-quadrant operation, and plan a compatible replacement before placing an order through the XAIPART Request a Quote form.

RFQ پەیوەندی
AD534KDZ - 4-Quadrant Precision Multiplier | Analog Devices
AD534KDZ

AD534KDZ - 4-Quadrant Precision Multiplier | Analog Devices

The Analog Devices AD534KDZ is an internally trimmed, monolithic four-quadrant multiplier/divider packaged in a 14-pin ceramic DIP. It accepts analog input signals and performs multiplication or division functions for precision control, measurement, and signal-processing systems. The device is specified as a precision analog multiplier with laser-trimmed calibration, combining a four-quadrant operating capability with an accurate, stable analog signal path. Its 14-CDIP package measures 0.300 inch, or 7.62 mm, across the body. An analog multiplier is a specialized analog-function integrated circuit that scales one input signal by another. Multiplication is common in gain control, signal normalization, modulation, automatic-range measurement, and closed-loop industrial control. A four-quadrant multiplier can multiply positive and negative input combinations, while the divider configuration supports precision ratio calculations. Within the broader semiconductor hierarchy, the AD534 is an analog signal-processing IC, a multiplier/divider, and ultimately an amplifier-class integrated circuit used to condition and control continuous-valued signals. Key device attributes include four-quadrant operation, monolithic construction, internal laser trimming, and a 14-CDIP package. Internal trimming calibrates the multiplier during manufacture, improving consistency between units and reducing the need for external adjustment. The monolithic implementation also keeps the multiplier and associated circuitry on one semiconductor die, supporting repeatable performance in analog instrumentation designs. ADI identifies the AD534 family as production products and describes it as an internally trimmed precision IC multiplier/divider. The AD534's architecture makes it useful where a computed analog quantity must be produced directly rather than implemented with a sequence of discrete op-amp stages. Compared with a digital multiplication approach, an analog multiplier can operate on continuously varying signals without first converting them into digital words. This reduces conversion latency and avoids quantization error, although the surrounding system must still manage offsets, temperature effects, reference accuracy, and downstream signal scaling. Typical applications include precision gain and attenuation control, laboratory and test instrumentation, process-control loops, analog signal normalization, modulation and demodulation blocks, and measurement systems that multiply a sensed quantity by a calibration factor. In an instrumentation design, the AD534 can scale a bridge or sensor output by a programmable control voltage, while in a divider configuration it can generate a proportional ratio for feedback or measurement stages. When laying out the board, treat the analog inputs, reference path, and output as a matched precision network. Keep sensitive signal traces short, avoid sharing return-current paths with switching circuitry, and use stable bypass capacitance at the device pins. Confirm the complete pin assignments and recommended operating conditions in the manufacturer data sheet before final routing, especially when the multiplier operates near its input or output limits.

RFQ پەیوەندی
AD534KHZ - 4-Quadrant Multiplier/Divider | Analog Devices
AD534KHZ

AD534KHZ - 4-Quadrant Multiplier/Divider | Analog Devices

Analog Devices AD534KHZ is a precision four-quadrant analog multiplier/divider built with monolithic, laser-trimmed construction and housed in a 10-lead TO-100 metal-can package. The device combines a multiplier/divider function with internally trimmed accuracy, low output noise of 90 µVrms over 10 Hz to 10 kHz, excellent supply rejection, low temperature coefficients, and strong long-term stability. It is intended for instrumentation and analog signal-processing systems that require accurate product or quotient calculations. An analog multiplier is an integrated circuit that multiplies two voltage signals, while an analog divider divides one signal by another. A four-quadrant multiplier can process positive and negative inputs, allowing it to support control-system modulation, signal calibration, RMS measurement, modulation, demodulation, feedback compensation, and precision analog computation. The AD534 belongs to the broader analog IC and amplifier hierarchy, combining signal conditioning and mathematical computation in one device. The AD534KHZ uses monolithic laser trimming to establish its internal calibration. This construction is relevant because trimming minimizes the need for external adjustment and supports repeatable performance across production units. Its documented output-noise performance of 90 µVrms from 10 Hz to 10 kHz is suitable for systems in which multiplier noise contributes directly to the accuracy of the calculated result. Excellent supply rejection helps preserve accuracy when the operating supply changes. Low temperature coefficients and excellent long-term stability are important in precision measurement systems because analog gain and offset errors can drift with environmental changes and component aging. The TO-100-10 package provides through-hole construction, mechanical robustness, and useful thermal mass compared with many small surface-mount packages. The metal enclosure also provides environmental shielding around the sensitive analog circuitry and can assist with heat dissipation. Typical uses include closed-loop control, analog signal calculation, precision test equipment, laboratory instrumentation, feedback-loop compensation, and modulation or demodulation circuits. Because the AD534 supports four-quadrant operation, bipolar control signals can be processed without requiring the system designer to split every calculation into separate positive and negative paths. The device is also suitable for gain-control and transducer-signal-conditioning arrangements where scaling accuracy is important. When implementing the AD534KHZ, follow the manufacturer datasheet for the complete pin description, input and output ranges, supply limits, bandwidth, settling behavior, and external component requirements. Keep sensitive input and output routing short, maintain the recommended bypass capacitance, and avoid unnecessary loading around the multiplier terminals. Confirm stability over the complete input, output, load, and temperature range of the intended system before production release. This page combines the verified AD534KHZ product identity, pricing context, package information, same-family alternatives, technical comparisons, and practical selection guidance. It supports engineers who need a precise four-quadrant multiplier/divider in a robust TO-100-10 package while keeping procurement and design decisions in one technical reference.

RFQ پەیوەندی
AD534LDZ - Precision 4-Quadrant Multiplier | Analog Devices
AD534LDZ

AD534LDZ - Precision 4-Quadrant Multiplier | Analog Devices

The Analog Devices AD534LDZ is an internally trimmed, monolithic precision four-quadrant multiplier/divider in a 14-CDIP package. It accepts bipolar analog input signals, supports multiplication and division across all four input quadrants, and uses laser trimming with an overall scale factor of 10 V. The AD534LDZ is intended for precision analog signal processing where accurate multiplication, division, scaling, modulation, and signal-level control are required. An analog multiplier is an integrated circuit that produces an output proportional to the product of two input voltages. A four-quadrant multiplier can process positive and negative inputs while retaining the correct output polarity. In signal-processing systems, this device belongs to the multiplier/divider class, which extends to analog computation, instrumentation, control, and measurement. Its monolithic construction combines the multiplier core, reference elements, trimming network, and output amplifier in one package. The AD534 family uses laser trimming to establish an overall scale factor of 10 V. According to the Analog Devices AD534 datasheet, an on-chip buried Zener supplies a stable reference that supports the trimming system. The result is a precision multiplier/divider with internally corrected scale-factor accuracy, supply rejection, low temperature coefficients, and long-term stability. These characteristics make the device suitable for analog control systems in which multiplier error directly influences system gain. A four-quadrant implementation permits both polarities without external sign-detection circuitry. This simplifies instrumentation using differential or bipolar sensor signals, particularly when the second input can also change polarity. Division is obtained by placing the denominator signal on the appropriate multiplier input. Careful reference and feedback design remains necessary because practical accuracy depends on signal range, denominator magnitude, supply conditions, trimming, and the precision of external resistors. Typical uses include precision test and measurement equipment, industrial process-control loops, laboratory signal conditioning, analog computation modules, closed-loop control, and four-quadrant signal modulation. The AD534LDZ is particularly appropriate when a system requires multiplication or division accuracy beyond a general-purpose analog multiplier and can accommodate a 14-CDIP through-hole package. Designers should preserve the required supply range and observe the pin-description table in the manufacturer datasheet when assigning input, output, reference, and supply connections. Signal amplitudes must remain within the operating limits for the selected accuracy grade. External resistor matching and temperature compensation may be necessary when the highest multiplier or divider accuracy is required. This page combines the exact package and production information, documented multiplier characteristics, practical application guidance, parameter comparisons, and sourcing options for engineers evaluating the AD534LDZ as a precision analog signal-processing component.

RFQ پەیوەندی
AD534LHZ - Precision 4-Quadrant Multiplier | Analog Devices
AD534LHZ

AD534LHZ - Precision 4-Quadrant Multiplier | Analog Devices

The Analog Devices AD534LHZ is a laser-trimmed, monolithic four-quadrant analog multiplier/divider with a 10-lead TO-100-10 package, a ±22 V operating supply range, and operation from -55 °C to +125 °C. It is designed for precision signal-processing systems that require multiplication or division of two analog signals while maintaining low noise and excellent long-term stability. The device also provides an active input and a trim function for applications requiring additional calibration. An analog multiplier/divider belongs to the precision signal-processing IC hierarchy, where it combines with operational amplifiers, references, and data-conversion devices to implement control, measurement, modulation, and signal-conditioning functions. Unlike a digital multiplier, the AD534LHZ operates directly on continuous analog waveforms without requiring conversion, serialization, or arithmetic processing. This makes it useful when bandwidth, signal phase, and low added noise matter more than programmability. The AD534 uses laser trimming to establish accurate scale-factor and symmetry characteristics. Analog Devices describes the product as a low-noise monolithic construction with 90 µV rms noise from 10 Hz to 10 kHz. Its four-quadrant operation allows either input polarity combination, supporting multiplication, division, RMS-related functions, modulation, and feedback-control applications. The manufacturer identifies the AD534 family as production devices, with the AD534LHZ offered in a 10-pin TO-100 package and tube packing. Technical performance depends on signal amplitude, frequency, supply voltage, load, external compensation, and the configuration of the surrounding operational amplifiers. Because the multiplier operates over a broad ±22 V supply range, its internal dynamic range and output behavior require careful reference selection and gain planning. For highest accuracy, designers should use stable reference and feedback networks, maintain appropriate input and output signal levels, and account for temperature drift when setting system calibration limits. Typical uses include precision closed-loop control, analog computation, instrumentation, programmable gain and signal conditioning, modulation, and measurement systems. The AD534LHZ can also support laboratory reference designs where a fixed four-quadrant multiplier is preferable to a digitally controlled multiplier. In industrial equipment, the wide temperature range can be valuable when the analog signal path must remain close to the sensing or actuation stage. The principal layout concern is sensitive analog routing. Keep multiplier inputs and feedback nodes away from switching-power nodes, use short grounded guarding around high-impedance inputs, and provide a stable low-noise supply. Check the complete manufacturer datasheet for pin functions, recommended application circuits, compensation values, and operating limits before fixing the PCB layout. This page combines package, temperature, electrical, sourcing, and application guidance with same-family drop-in alternatives, a parameter comparison, and practical design notes. It helps engineers identify the correct AD534 package option and plan a precision analog signal chain without conflating temperature-grade differences with functional compatibility.

RFQ پەیوەندی
AD538ADZ - 4-Quadrant Analog Computation Unit | ADI
AD538ADZ

AD538ADZ - 4-Quadrant Analog Computation Unit | ADI

Analog Devices AD538ADZ is a monolithic real-time analog computational unit with 4-quadrant multiplication, division, and exponentiation capability, housed in an 18-pin SBDIP package. The device combines precision analog signal processing with laser wafer trimming, allowing multiplication and division errors as low as 0.25% of reading over a wide input dynamic range. An analog computational unit, or ACU, is a specialized analog integrated circuit that computes mathematical relationships directly from continuously varying electrical signals. Unlike a digital processor, it performs multiplication, division, and exponentiation in real time without converting the inputs to digital form. Within the broader hierarchy of analog multiplication ICs, divider ICs, and special-purpose signal-processing ICs, the AD538ADZ provides a compact way to implement control, measurement, modulation, and feedback functions. The AD538ADZ provides four-quadrant multiplication, supporting both positive and negative input polarities. Its monolithic construction reduces the number of separate multipliers, dividers, and surrounding operational amplifiers normally required to implement equivalent calculations. Laser wafer trimming improves production consistency and supports multiplication and division errors as low as 0.25% of reading, making the device useful where accuracy must be combined with continuous analog operation. Internally, the circuit uses analog computational techniques to calculate products, ratios, and exponential relationships directly from voltage inputs. The low input and output offset voltages help preserve accuracy near the origin, while excellent linearity extends useful performance across the operating input range. The AD538ADZ is therefore more than a general-purpose multiplier: it is a dedicated computational building block for systems where the output must vary continuously and proportionally with one or more analog inputs. Typical uses include analog servo loops, automatic-gain-control circuits, measurement and control systems, signal conditioning, modulation, demodulation, and real-time feedback calculations. It can also simplify instrumentation in which a computed analog quantity is needed before conversion by an ADC. Compared with a software-defined calculation approach, the ACU avoids conversion delay and processor overhead, although the surrounding circuit still requires careful reference, grounding, and stability design. For new designs, verify the complete pin assignment and transfer equations in the Analog Devices AD538 datasheet before layout, because the 18-pin SBDIP construction differs from common surface-mount multiplier packages. Pay particular attention to supply bypassing, analog signal routing, reference behavior, and output loading. A prototype should also verify multiplication and division error across the intended input range rather than relying on a single operating point. This page organizes the AD538ADZ product information, sourcing details, comparison points, and engineering guidance into one compact reference. It also distinguishes the validated AD538BDZ replacement from the many search results that only describe generic multiplier or cross-reference functions without confirming a pin-compatible AD538ADZ substitute.

RFQ پەیوەندی
AD538BDZ Analog Computational Unit | Analog Devices
AD538BDZ

AD538BDZ Analog Computational Unit | Analog Devices

Analog Devices AD538BDZ is a monolithic real-time Analog Computational Unit (ACU) for precision analog multiplication, division, and exponentiation, supplied in an 18-pin SBDIP package. The device is designed for instrumentation and control systems that require computational functions without a digital processor. According to the Analog Devices AD538 product description, low input and output offset voltages, excellent linearity, and laser wafer trimming enable multiplication and division errors as low as 0.25% of reading over a wide input dynamic range. An analog computational unit is a specialized analog signal-processing IC. Unlike a general-purpose operational amplifier or multiplier IC, the AD538 family combines multiplier, divider, and exponentiation functions in one monolithic circuit, simplifying precision measurement and control designs. Its architecture places computation directly in the analog signal path, allowing a sensor or measurement amplifier output to be processed without first converting the signal into a digital representation. The AD538BDZ provides a four-quadrant analog computational function and is specified as a precision analog multiplier/divider. The B-grade device is intended for applications requiring tightened accuracy specifications compared with the standard AD538ADZ grade. The result is a compact solution for analog control loops, sensor instrumentation, laboratory measurement equipment, and industrial signal-processing systems where maintaining accuracy directly in the analog domain is valuable. The monolithic construction supports consistent behavior across the operating range and avoids the need to combine several separate multiplier, divider, and precision amplifier blocks. Its low offset contribution is particularly useful when the computed result depends on small differences between input signals. The wide dynamic range also helps preserve useful accuracy when the signal being processed varies substantially in magnitude. Typical applications include ratiometric sensor measurement, tilt and position sensing, closed-loop control, programmable gain and reference calculations, laboratory instrumentation, and industrial process monitoring. In these systems, the AD538BDZ can calculate a scaled relationship between two analog voltages, support divider-based computations, or implement an exponentiation function in a feedback loop. The manufacturer documentation includes circuit examples that should be used as the starting point for signal conditioning and compensation. For a new design, confirm the required accuracy grade, supply arrangement, input and output ranges, frequency response, and thermal conditions against the manufacturer datasheet before finalizing the PCB. The SBDIP package is through-hole and is mechanically different from modern surface-mount multiplier packages, so a replacement that does not match the 18-pin footprint requires board-level redesign. This product page combines the verified manufacturer description, distributor package information, direct-replacement references, and practical selection guidance. It is intended to help engineers identify the correct AD538 family member and plan a pin-compatible upgrade without overlooking the distinction between standard and tightened accuracy grades.

RFQ پەیوەندی
AD539JDZ - 5V Dual-Channel Analog Multiplier | Analog Devices
AD539JDZ

AD539JDZ - 5V Dual-Channel Analog Multiplier | Analog Devices

The Analog Devices AD539JDZ is a dual-channel bipolar analog multiplier with two identical signal channels, Y1 and Y2, controlled by a common X input. The device operates from a 5 V supply, provides a 3 dB bandwidth of more than 60 MHz, and is packaged in a 16-lead ceramic dual in-line package designated 16-CDIP. Its two-channel architecture allows a single control signal to influence both analog signal paths while retaining matched performance between channels. An analog multiplier is a special-purpose amplifier that multiplies two input voltages and produces an output proportional to their mathematical product. Unlike a general-purpose operational amplifier, which performs linear amplification and filtering, the AD539 implements multiplication directly in its signal path. It belongs to the amplifier IC hierarchy alongside instrumentation, variable-gain, and special-purpose amplifiers, where it provides the gain-control function normally requiring several external precision components. The AD539's principal features are its matched dual-channel construction, low distortion analog multiplication, video-frequency operation, and 60 MHz-plus bandwidth. The common X control input provides linear control of gain across both channels, which is useful in balanced signal-processing systems. The AD539 product page describes excellent AC characteristics extending into the video range, supporting applications that need accurate analog gain control rather than general-purpose amplification. Internally, the device uses bipolar transistor circuitry in a differential multiplier configuration. Differential signal handling improves rejection of common-mode signals and supports balanced operation when both Y channels are used together. Its analog output is proportional to the product of the X input and the selected Y input, with the second channel available for a second product, control, or compensation function. Typical uses include dual-axis analog control, automatic gain control, modulation and demodulation support, video signal processing, measurement systems, and instrumentation requiring accurate multiplication. The identical Y1 and Y2 channels also suit designs where channel matching is valuable, such as differential excitation, quadrature signal generation, or parallel analog computations. When laying out this device, keep input and output return paths compact and preserve the symmetry between the two multiplier channels. Avoid long unprotected traces around high-impedance inputs, and follow the manufacturer pin-connection and evaluation-circuit diagrams when selecting termination and balancing networks. Ceramic DIP construction is intended for applications that value mechanical robustness, thermal stability, and long service life. This page organizes the manufacturer's device description, distributor availability records, package information, order-code alternatives, and application guidance into a single engineering reference. It also identifies which electrical ratings require confirmation from the AD539 datasheet before layout or production release.

RFQ پەیوەندی
AD539JNZ - Dual 60MHz Analog Multiplier | Analog Devices
AD539JNZ

AD539JNZ - Dual 60MHz Analog Multiplier | Analog Devices

Analog Devices AD539JNZ is a wideband, dual-channel, two-quadrant analog multiplier/divider with two identical Y signal channels, a common X control input, and a bandwidth exceeding 60 MHz. The device is packaged in a 16-pin PDIP and is intended for high-speed analog computation, gain control, modulation, and signal-processing systems. An analog multiplier is a signal-processing semiconductor that multiplies two analog voltages and produces an output proportional to their product. The AD539 belongs to the wider multiplier/divider category within analog ICs, where it provides a controlled computational function that would otherwise require several amplifiers, resistors, and precision networks. Its two matched Y channels allow one common X signal to control two analog operations simultaneously. The AD539 family emphasizes wideband ac performance, low distortion, and useful static accuracy for computational circuits. According to the Analog Devices AD539 data sheet, Revision B, the common X input provides linear control of gain, while the two identical signal channels are labeled Y1 and Y2. Its stated -3 dB bandwidth is greater than 60 MHz, making it applicable to video-frequency signal chains rather than only precision low-frequency measurement systems. The architecture supports two-quadrant operation, meaning either polarity of the control input can be used while one signal input defines the output magnitude. This makes the AD539 useful for amplitude modulation, multiplication-based automatic gain control, analog signal inversion, waveform generation, and real-time analog product computation. Its bandwidth permits the multiplier to process signals well beyond audio frequencies. Typical applications include broadband gain control in communication receivers, modulation and demodulation circuits, precision signal conditioning, laboratory analog computers, video signal processing, and closed-loop control systems. For bidirectional or full-wave applications, additional circuitry is required because the AD539 provides two-quadrant rather than four-quadrant multiplication. Layout and signal integrity are critical because high-speed analog multiplication requires short, symmetric paths and careful grounding. Keep X1, X2, Y1, and Y2 connections compact, use a solid ground plane, and place input and output compensation or termination networks where recommended by the manufacturer application guidance. Because the AD539 is not recommended for new designs, engineers should evaluate its technical suitability carefully when supporting legacy equipment. This page combines the manufacturer product information with practical application guidance, pin-package details, drop-in family options, and engineering trade-offs. It is intended to help buyers identify the correct legacy device, verify PCB compatibility, and determine whether the AD539JNZ is suitable for a maintenance, retrofit, or specialized analog-computation design.

RFQ پەیوەندی
AD542SH - Low-Noise BiFET Op Amp, ±18V, TO-99
AD542SH

AD542SH - Low-Noise BiFET Op Amp, ±18V, TO-99

The Analog Devices AD542SH is a single, precision BiFET-input operational amplifier specified for ±18 V operation, with a maximum input bias current of 25 pA, a slew rate of 13 V/µs, and a gain-bandwidth product of 1 MHz. The device is supplied in an 8-pin TO-99 hermetic metal-can package for applications requiring low input current and reliable operation in demanding analog signal paths. A BiFET operational amplifier is a voltage-feedback amplifier whose field-effect-transistor input stage provides very low input bias current. This input characteristic places the AD542SH in the broader hierarchy of FET-input operational amplifiers, analog amplifiers, signal-conditioning ICs, and power-management-supporting semiconductor devices. Low input current is especially useful when the amplifier must interface with high-impedance sensors, transducers, photodetectors, or precision measurement networks without loading the source. Key characteristics include a maximum input offset voltage of 1 mV, input offset drift of 15 µV/°C, a quiescent current of 1.5 mA, open-loop gain of 110 dB, and a listed common-mode rejection value of 80 dB. Its 13 V/µs slew rate supports comparatively fast large-signal transitions, while the 1 MHz gain-bandwidth product is suitable for precision gain, buffering, and general-purpose analog amplification. The AD542SH also provides overvoltage protection and can drive capacitive loads according to the manufacturer documentation. The AD542SH belongs to the AD542, AD544, and AD547 precision BiFET family, which uses monolithic BiFET construction and laser-trimming technology. This combination targets applications in which conventional bipolar input stages would draw excessive bias current or introduce unacceptable source loading. The low-bias architecture is especially valuable in instrumentation, photodetector interfaces, and high-impedance sensor amplifiers, while the laser-trimmed offset characteristics support stable DC operation. Typical uses include low-level sensor conditioning, photodiode and phototransistor amplification, buffered measurement inputs, precision current-to-voltage conversion, and gain stages in laboratory or industrial instrumentation. The hermetic TO-99 package can also suit equipment requiring a traditional metal-can mechanical format. Because the amplifier is a voltage-feedback device, feedback-network design, source impedance, load capacitance, and common-mode operating range remain central to stable operation. When laying out a circuit using the AD542SH, keep feedback resistors close to the device and minimize parasitic capacitance on the output and inverting-input nodes. Check bias-current cancellation for high source impedances, because although the maximum input bias current is only 25 pA, even picoamp-level current can create meaningful offset across megaohm-class resistances. Confirm output swing, input common-mode range, and capacitive-load stability against the manufacturer operating table. This page combines the AD542SH electrical characteristics, package details, application guidance, design notes, and family comparisons to support engineering selection and PCB implementation. It also organizes drop-in family options and clearly identifies which replacement questions require additional qualification before schematic or layout changes are approved.

RFQ پەیوەندی
AD544LH - Precision BiFET Op Amp, 25 pA Max | Analog Devices
AD544LH

AD544LH - Precision BiFET Op Amp, 25 pA Max | Analog Devices

The Analog Devices AD544LH is a single, precision BiFET operational amplifier specified for a maximum input bias current of 25 pA at room temperature and a maximum input offset voltage of 500 uV. The device is offered in the hermetically sealed, eight-pin TO-99 metal can package designated MBCY8, making it suitable for legacy and high-reliability analog signal-conditioning designs that require a through-hole metal-can footprint. A BiFET operational amplifier is a voltage-amplifier IC whose input stage uses field-effect transistors to produce very low input bias current. Within the signal-chain hierarchy, the AD544LH belongs to the family of precision amplifiers used for current-to-voltage conversion, instrumentation, buffering, and feedback control. Its low-bias input characteristic is especially useful when the source impedance is high and the amplifier must avoid loading the sensing node. The AD544 family uses precision monolithic BiFET construction combined with laser trimming for offset-voltage control. Key characteristics include one amplifier function, a maximum offset voltage of 500 uV for the AD544LH grade, and a maximum bias current of 25 pA when warmed up. The L grade operates from 0°C to +70°C, while the S grade in the same family covers -55°C to +125°C. All devices in the AD542, AD544, and AD547 series are offered in the hermetically sealed TO-99 metal can package. This construction supports use in older instrumentation, industrial analog interfaces, and precision measurement equipment where a conventional eight-lead metal-can footprint is already established on the board. Typical applications include precision transimpedance amplifiers, guarded sensor amplifiers, low-level signal conditioning, laboratory measurement systems, and industrial process-control interfaces. The low bias current helps preserve small sensor signals, while the trimmed offset limits input-referred error when the signal is amplified through high gain. When designing a replacement circuit, confirm the eight-pin TO-99 pin arrangement, supply voltage, common-mode range, output swing, and stability requirements before substitution. Keep sensitive input-node routing short, use a clean ground reference, and verify that the selected grade covers the intended ambient temperature range.

RFQ پەیوەندی
AD544SH - Military BiFET Operational Amplifier | Analog Devices
AD544SH

AD544SH - Military BiFET Operational Amplifier | Analog Devices

The Analog Devices AD544SH is a precision, military-grade BiFET operational amplifier packaged in an 8-lead hermetically sealed TO-99 metal can. The device combines a low-noise JFET input stage with an input bias current of 25 pA maximum when warmed up, while the S-grade AD544SH supports an operating temperature range of -55°C to +125°C. Its hermetic metal-can construction makes it suitable for instrumentation, sensor interfaces, and precision analog signal paths requiring a low-bias input resistance. A BiFET operational amplifier is an input stage built around junction field-effect transistors. The BiFET input architecture places a very low bias current across high-impedance sources, allowing the amplifier to sense weak currents and voltages without loading the source. In the broader hierarchy, the AD544SH belongs to the operational amplifier class, then to precision analog amplifiers, and finally to semiconductor signal-conditioning ICs used in test, measurement, and instrumentation systems. The principal benefits of the AD544SH include its 25 pA maximum warmed input bias current, low-offset BiFET input characteristics, and extended -55°C to +125°C operating range. The 25 pA bias rating is particularly useful with photodiodes, high-impedance transducers, charge-sensitive circuits, and guarded sensor nodes. The military temperature grade makes the device more appropriate than the commercial J-, K-, or L-grade AD544 variants where environmental extremes and long-term parameter stability are important. Internally, the AD544 uses a monolithic BiFET and laser-trimmed construction. Laser trimming reduces offset-related variation between individual devices, while the monolithic implementation combines the FET input stage and compensation network in one package. The resulting topology supports stable amplification of low-level analog signals while preserving high input impedance. Offset-null terminals permit local input-offset adjustment when the application requires fine trimming beyond the factory calibration. Typical uses include precision current-to-voltage conversion, low-current photodetection, bridge-sensor amplification, laboratory buffer stages, and high-impedance instrumentation. In a transimpedance amplifier, the AD544SH's low input bias current reduces error in the feedback-resistor node. In a buffer or voltage follower, its high input impedance limits loading of the source, although the circuit remains subject to input capacitance, leakage, and environmental noise considerations. For dependable operation, keep the input and feedback impedances realistic for the ambient humidity and temperature, bypass the supply pins close to the device, and route offset-null connections only when external trimming is required. The manufacturer datasheet should be consulted for the complete electrical limits, pin functions, offset-voltage characteristics, compensation details, and recommended application circuit before qualifying the AD544SH in production equipment. This page consolidates the available manufacturer information, exact-MPN pricing record, package details, family comparison, and practical engineering guidance for engineers evaluating the AD544SH as a hermetically sealed, military-temperature BiFET operational amplifier.

RFQ پەیوەندی
AD548AQ/+ - Precision Low-Power BiFET Op Amp | Analog Devices
AD548AQ/+

AD548AQ/+ - Precision Low-Power BiFET Op Amp | Analog Devices

Analog Devices AD548AQ/+ is a precision, low-power BiFET operational amplifier featuring a maximum input bias current of 10 pA when warmed, a maximum quiescent current of 200 µA, and a 1 MHz unity-gain bandwidth in an 8-pin CERDIP package. It combines low input bias current with low offset voltage and low offset drift, making it suitable for precision measurement and signal-conditioning circuits. A BiFET operational amplifier is an amplifier whose input stage uses field-effect transistors rather than bipolar input transistors. This architecture belongs to the operational-amplifier hierarchy and provides very high input impedance, low input bias current, and effective handling of high-impedance sources. The AD548 family is designed for low-power instrumentation where a low-noise, high-impedance input stage is more important than the drive current available from conventional bipolar operational amplifiers. The AD548AQ/+ provides a maximum offset voltage of 250 µV and maximum offset-voltage drift of 2 µV/°C. Its voltage noise is specified as 2 µV peak-to-peak, while the slew rate is 2 V/µs and the unity-gain bandwidth is 1 MHz. A maximum quiescent current of 200 µA supports low-power signal-chain operation, and the 10 pA warmed input bias current reduces loading on sensitive sensors, transducers, and high-resistance feedback networks. The amplifier uses ion-implanted FET and laser wafer-trimming technologies. Ion implantation supports low-noise transistor construction, while laser trimming enables accurate offset-voltage correction. These techniques are particularly useful in feedback configurations where DC offset can influence the accuracy of an instrumentation amplifier, current-to-voltage converter, or low-level sensor front end. Its 1 MHz bandwidth provides useful speed for general precision analog signals while retaining the low-power characteristics of the AD548 family. Typical applications include pH and electrochemical sensor amplification, photodiode and optical-sensor signal conditioning, low-current measurement, capacitive-sensor interfaces, precision bridge amplifiers, and low-leakage instrumentation. The amplifier is also useful in battery-powered equipment because its 200 µA maximum quiescent current limits the standing current drawn from the supply. Care is required when adding output isolation or driving capacitive loads because high-impedance nodes can increase sensitivity to stray capacitance and leakage. For each feedback divider, verify resistor values against the input bias-current, offset, and bandwidth requirements rather than relying only on nominal gain calculations. Keep sensitive input and feedback nodes short and physically separated from switching nodes and high-current return paths. Where leakage from PCB contamination or guarding matters, use guarding techniques and clean, low-flux materials around the input terminals. This product record combines the AD548AQ/+ electrical characteristics with package information, sourcing guidance, practical application notes, and a qualified comparison of legacy ordering variants. It is designed to help engineers evaluate bias-current noise, offset stability, power consumption, and ceramic-package suitability before integrating the amplifier into precision analog systems.

RFQ پەیوەندی
AD548BQ - Low-Power Precision BiFET Op Amp | Analog Devices
AD548BQ

AD548BQ - Low-Power Precision BiFET Op Amp | Analog Devices

The Analog Devices AD548BQ is a single-amplifier, precision BiFET operational amplifier with an 800 uV maximum offset voltage, 1 MHz gain-bandwidth product, 10 pA maximum warmed-up input bias current, and 200 uA maximum quiescent current. The device is supplied in a hermetically sealed 8-CERDIP package for applications requiring a low-noise, low-power analog signal-conditioning stage. A BiFET operational amplifier is a voltage-input amplifier whose input stage uses field-effect transistors. This amplifier category combines very low input bias current with low supply consumption, making it suitable for precision measurement, buffering, and feedback circuits in which source impedance or sensor leakage could otherwise create measurement error. Within the broader hierarchy, the AD548BQ is an operational amplifier, analog IC, and semiconductor. The AD548 family uses ion-implanted FET technology and laser wafer trimming. Its principal characteristics include an 800 uV maximum input offset voltage, 1 MHz gain-bandwidth product, 10 pA maximum input bias current after warm-up, and 200 uA maximum quiescent current. The Analog Devices product page identifies AD548B as an industrial-temperature product and describes low drift, low supply current, and strong direct-current and alternating-current performance. The AD548BQ operates as a general-purpose precision amplifier with one amplifier circuit. Its low bias current reduces errors when driving high source impedances, while its low quiescent current supports compact, low-power instrumentation. The hermetically sealed ceramic package is useful where environmental robustness and long-term operating stability are important, although component availability should be confirmed before starting a new design because Analog Devices marks the AD548 family as not recommended for new designs. Typical uses include precision buffer stages, low-level sensor interfaces, laboratory instrumentation, photodiode signal conditioning, and feedback networks requiring low input leakage. The 1 MHz bandwidth is suitable for moderate-frequency signal paths rather than high-speed waveform processing. In each case, the input network, output loading, and supply bypass arrangement determine whether the amplifier's offset and noise behavior can be fully utilized. Designers should begin with the manufacturer datasheet pin-description table, then verify the ceramic package orientation and pin numbering before PCB assembly. Adequate supply bypassing and careful routing of high-impedance input nodes are especially important because parasitic capacitance and leakage can degrade accuracy even when the amplifier itself is operating within specification. This page consolidates the manufacturer's AD548 family information, identifies the hermetically sealed AD548BQ configuration, documents the limits of current sourcing, and provides comparison and application guidance for engineers who must decide whether this legacy precision amplifier remains suitable for an existing or long-lived instrument.

RFQ پەیوەندی