بەرهەمەکان (3,200+)

TPA3244DDW - 60W Stereo Class-D Amplifier | Texas Instruments
TPA3244DDW

TPA3244DDW - 60W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TPA3244DDW is a high-performance, 60 W stereo Class-D audio power amplifier with 120 W mono capability, analog input, and pad-down construction in a 44-pin HTSSOP (DDW) package. It accepts a 12 V to 31.5 V supply, operates across a 0°C to 70°C temperature range, and uses Texas Instruments PurePath Ultra-HD technology to deliver premium sound quality with the efficiency of a Class-D output stage. A Class-D audio amplifier is a power-management IC that switches its output stage between active and inactive states, reducing the amount of energy dissipated compared with a conventional linear output stage. Within the audio-amplifier hierarchy, the TPA3244DDW combines an analog input interface, integrated power stages, speaker outputs, and thermal management in one package. This integration supports compact stereo and high-power mono designs without requiring discrete output transistors on the board. The principal feature is its 60 W stereo output rating, with the same device specified for operation as a 120 W mono amplifier. Analog input simplifies compatibility with conventional audio sources, while the 12 V to 31.5 V supply range accommodates common single-rail amplifier architectures. The pad-down HTSSOP package places the exposed thermal pad beneath the device so PCB copper can remove heat from the power stage. Its stated operating range is 0°C to 70°C, making it appropriate for indoor consumer and professional audio equipment where that environmental range is acceptable. PurePath Ultra-HD technology distinguishes this amplifier from basic Class-D solutions by targeting low output distortion and high-quality audio reproduction. The integrated switching output stage avoids the continuous bipolar dissipation associated with linear amplifier output stages, although efficiency still depends on supply voltage, output power, load impedance, and thermal design. A low-impedance, low-noise supply is important because supply noise and instability can affect the power stage even when the audio input is clean. Typical uses include powered speakers, active bookshelf speakers, compact home-theater systems, soundbars, subwoofer power stages, and multimedia speaker enclosures. In stereo operation, the amplifier can drive two speaker channels from an analog source. In a bridged mono arrangement, its 120 W capability can serve a subwoofer or high-output monoblock. The 44-pin HTSSOP package requires careful PCB layout, adequate exposed-pad thermal copper, and a clean power-supply connection. Designers should follow the recommended application diagrams in the manufacturer datasheet, preserve the exposed-pad thermal path, and use the specified input and supply decoupling. Speaker wiring and power-supply connections must be sized for the intended output level. Stereo, bridged mono, and single-ended configurations have different terminal and load constraints, so confirm the selected topology before finalizing the board layout. This page combines the official device specifications with application guidance, packaging details, and a conservative drop-in assessment. It also distinguishes verified device facts from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware qualification without relying on assumptions.

RFQ پەیوەندی
TPA3244DDWR - 60W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)
TPA3244DDWR

TPA3244DDWR - 60W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)

The Texas Instruments TPA3244DDWR is a high-performance, 60 W stereo Class-D audio power amplifier with 120 W mono capability, analog input, and pad-down construction in a 44-pin HTSSOP (DDW) package. It accepts a 12 V to 31.5 V supply, operates across a 0°C to 70°C temperature range, and uses Texas Instruments PurePath Ultra-HD technology to deliver premium sound quality with the efficiency of a Class-D output stage. A Class-D audio amplifier is a power-management IC that switches its output stage between active and inactive states, reducing the amount of energy dissipated compared with a conventional linear output stage. Within the audio-amplifier hierarchy, the TPA3244DDWR combines an analog input interface, integrated power stages, speaker outputs, and thermal management in one package. This integration supports compact stereo and high-power mono designs without requiring discrete output transistors on the board. The principal feature is its 60 W stereo output rating, with the same device specified for operation as a 120 W mono amplifier. Analog input simplifies compatibility with conventional audio sources, while the 12 V to 31.5 V supply range accommodates common single-rail amplifier architectures. The pad-down HTSSOP package places the exposed thermal pad beneath the device so PCB copper can remove heat from the power stage. Its stated operating range is 0°C to 70°C, making it appropriate for indoor consumer and professional audio equipment where that environmental range is acceptable. PurePath Ultra-HD technology distinguishes this amplifier from basic Class-D solutions by targeting low output distortion and high-quality audio reproduction. The integrated switching output stage avoids the continuous bipolar dissipation associated with linear amplifier output stages, although efficiency still depends on supply voltage, output power, load impedance, and thermal design. A low-impedance, low-noise supply is important because supply noise and instability can affect the power stage even when the audio input is clean. Typical uses include powered speakers, active bookshelf speakers, compact home-theater systems, soundbars, subwoofer power stages, and multimedia speaker enclosures. In stereo operation, the amplifier can drive two speaker channels from an analog source. In a bridged mono arrangement, its 120 W capability can serve a subwoofer or high-output monoblock. The 44-pin HTSSOP package requires careful PCB layout, adequate exposed-pad thermal copper, and a clean power-supply connection. Designers should follow the recommended application diagrams in the manufacturer datasheet, preserve the exposed-pad thermal path, and use the specified input and supply decoupling. Speaker wiring and power-supply connections must be sized for the intended output level. Stereo, bridged mono, and single-ended configurations have different terminal and load constraints, so confirm the selected topology before finalizing the board layout. This page combines the official device specifications with application guidance, packaging details, and a conservative drop-in assessment. It also distinguishes verified device facts from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware qualification without relying on assumptions.

RFQ پەیوەندی
TPA3245DDV - 115W Class-D Amplifier | Texas Instruments
TPA3245DDV

TPA3245DDV - 115W Class-D Amplifier | Texas Instruments

The Texas Instruments TPA3245DDV is a 2-channel analog-input Class-D audio power amplifier rated for 115 W stereo output and 230 W mono output from a 12 V to 31.5 V supply, housed in a 44-pin HTSSOP package. It combines high output power with the efficiency advantages of Class-D amplification for premium audio systems. A Class-D audio amplifier is a power-management semiconductor that switches its output stage efficiently to reproduce an analog input signal at speaker-level voltage and current. The TPA3245 belongs to the amplifier IC hierarchy that includes analog power amplifiers, audio amplifiers, and Class-D output stages. Its two-channel architecture supports stereo operation, while its mono capability permits both channels to be combined for a higher-power single-channel configuration. The TPA3245DDV provides 115 W per channel in stereo mode and 230 W into a single channel in mono mode. Its 12 V to 31.5 V operating supply range accommodates higher-voltage audio systems, and its analog input architecture accommodates conventional line-level signals. The Class-D topology provides high efficiency while supporting the high output power associated with powered speakers, home-theater equipment, and professional audio amplification. The 44-pin HTSSOP package provides a compact surface-mount implementation for multi-channel audio products. The manufacturer identifies the TPA3245 as a high-performance amplifier designed to provide premium sound quality with efficient Class-D technology. Its 15 mA quiescent current helps limit standing consumption when the amplifier is active but not delivering significant output power. Typical uses include powered stereo speakers, home-theater amplifiers, soundbars, powered subwoofer platforms, and other high-output audio equipment. In a stereo design, each channel drives its assigned speaker section. In a bridged mono arrangement, the two output channels combine to deliver up to 230 W into one speaker load. Thermal design, output-filter selection, power-rail stability, and speaker-load compatibility determine practical performance. The design must also account for the full 12 V to 31.5 V supply range and maintain adequate PCB copper area for heat dissipation. Use the manufacturer datasheet pin description and application information when assigning connections and laying out the power stage. This product page combines the official device description, distributor identification, electrical highlights, application guidance, and verified replacement information. It also distinguishes an exact same-package ordering variant from packaging-only alternatives and identifies design parameters that require confirmation in the manufacturer datasheet before a PCB is released.

RFQ پەیوەندی
TPA3255DDV - 315W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)
TPA3255DDV

TPA3255DDV - 315W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)

The Texas Instruments TPA3255DDV is a 315 W stereo, 600 W mono, analog-input Class-D audio power amplifier with an 18 V to 53.5 V supply range, supplied in a 44-pin HTSSOP DDV package. It is designed for high-power audio systems requiring efficient amplification and premium sound quality. The device supports two-channel stereo operation and can also be configured for mono use at higher output power. A Class-D audio amplifier is a switching power amplifier that uses transistor switching to deliver audio energy efficiently. In the broader hierarchy, a Class-D amplifier belongs to audio amplifiers, linear and nonlinear power amplifiers, and power-management semiconductor systems. Compared with a conventional linear audio amplifier, its switching architecture can reduce wasted power and heat while maintaining high output capability. The verified product information identifies 315 W stereo output, 600 W mono output, analog input, an 18 V to 53.5 V supply range, and a 44-pin HTSSOP package. The distributor listing also identifies the amplifier as a two-channel stereo Class-D device. These ratings make it suitable for professional audio, home-theater, public-address, multimedia, and other high-power sound systems where load capability and efficiency are important. Thermal design is central to using this amplifier because Class-D power stages can dissipate substantial heat at high output power. The DDV package provides a large thermal pad for board-level heat spreading, but the exact thermal resistance, output configuration details, protection thresholds, and application-specific limits must be taken from the manufacturer datasheet. The verified distributor information reports a 44-pin PowerTSSOP package and an operating-temperature range of 0 to 70 °C for the listed orderable part. Typical implementation uses analog audio inputs into the Class-D power stage, with speaker outputs driving stereo or bridged mono configurations. The amplifier is appropriate when the system supply is in the verified 18 V to 53.5 V range and the load is compatible with the manufacturer-defined output power conditions. Board layout, speaker wiring, grounding, thermal management, and protection circuitry should follow the TI datasheet and evaluation-board guidance. This product page combines verified Texas Instruments specifications, distributor package and sourcing information, application guidance, and verified cross-reference results. It distinguishes the high-power TPA3255DDV from lower-power or functionally similar parts that may use different packages or pin configurations.

RFQ پەیوەندی
TPA3255DDVR - 315W Stereo Class-D Amplifier | Texas Instruments
TPA3255DDVR

TPA3255DDVR - 315W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TPA3255DDVR is a 315 W stereo, 600 W mono, analog-input Class-D audio power amplifier with an 18 V to 53.5 V supply range, supplied in a 44-pin HTSSOP DDV package. It is designed for high-power audio systems requiring efficient amplification and premium sound quality. The device supports two-channel stereo operation and can also be configured for mono use at higher output power. A Class-D audio amplifier is a switching power amplifier that uses transistor switching to deliver audio energy efficiently. In the broader hierarchy, a Class-D amplifier belongs to audio amplifiers, linear and nonlinear power amplifiers, and power-management semiconductor systems. Compared with a conventional linear audio amplifier, its switching architecture can reduce wasted power and heat while maintaining high output capability. The verified product information identifies 315 W stereo output, 600 W mono output, analog input, an 18 V to 53.5 V supply range, and a 44-pin HTSSOP package. The distributor listing also identifies the amplifier as a two-channel stereo Class-D device. These ratings make it suitable for professional audio, home-theater, public-address, multimedia, and other high-power sound systems where load capability and efficiency are important. Thermal design is central to using this amplifier because Class-D power stages can dissipate substantial heat at high output power. The DDV package provides a large thermal pad for board-level heat spreading, but the exact thermal resistance, output configuration details, protection thresholds, and application-specific limits must be taken from the manufacturer datasheet. The verified distributor information reports a 44-pin PowerTSSOP package and an operating-temperature range of 0 to 70 °C for the listed orderable part. Typical implementation uses analog audio inputs into the Class-D power stage, with speaker outputs driving stereo or bridged mono configurations. The amplifier is appropriate when the system supply is in the verified 18 V to 53.5 V range and the load is compatible with the manufacturer-defined output power conditions. Board layout, speaker wiring, grounding, thermal management, and protection circuitry should follow the TI datasheet and evaluation-board guidance. This product page combines verified Texas Instruments specifications, distributor package and sourcing information, application guidance, and verified cross-reference results. It distinguishes the high-power TPA3255DDVR from lower-power or functionally similar parts that may use different packages or pin configurations.

RFQ پەیوەندی
TPS3700DDCR2 - 18V Window Comparator | Texas Instruments
TPS3700DDCR2

TPS3700DDCR2 - 18V Window Comparator | Texas Instruments

The Texas Instruments TPS3700DDCR2 is an 18 V window voltage detector with two high-accuracy comparators, an internal 400 mV reference, and two open-drain outputs rated to 18 V, packaged in the 6-pin SOT-23-THIN package. It monitors supply voltages from 1.8 V to 18 V and supports overvoltage and undervoltage detection. A window voltage detector compares a monitored supply against internally generated upper and lower thresholds. It can operate as a two-channel window comparator or as two independent voltage monitors. This device belongs to the comparator hierarchy, combines a voltage detector function with a precision internal reference, and sits within the broader power management semiconductor and system monitoring categories. The TPS3700DDCR2 provides two separate open-drain indication outputs, allowing a system to identify both undervoltage and overvoltage conditions. Its 18 V output rating supports monitoring applications above the voltage range commonly handled by basic low-voltage comparator ICs. The internal 400 mV reference provides the basis for externally programmed detection thresholds. Both comparators include built-in hysteresis according to the manufacturer product information. Hysteresis helps reject brief input disturbances and improves output stability when the monitored voltage is close to a threshold. The device can be configured through external components for different supply ranges, reducing the need for a separate precision reference when the application requires upper and lower fault detection. Typical uses include industrial equipment monitoring, battery-powered systems, communication equipment, consumer electronics, and power rails where the system must disable downstream circuitry during an invalid voltage condition. The two independent outputs can also support separate fault-reporting paths in redundant or multi-rail architectures. When designing the circuit, calculate the resistor-defined upper and lower thresholds against the monitored input range, and verify that every pulled-up open-drain output remains below its 18 V rating. The SOT-23-THIN package also requires careful PCB layout and thermal review when the surrounding circuitry or board raises the device temperature. This product page combines verified manufacturer and distributor information with pin-compatible alternatives, parameter comparisons, application guidance, and practical design notes so engineers can evaluate the TPS3700DDCR2 alongside replacement options without treating merely similar supervisors as exact drop-in parts.

RFQ پەیوەندی
TPS3700DDCT - 18V Window Comparator | Texas Instruments
TPS3700DDCT

TPS3700DDCT - 18V Window Comparator | Texas Instruments

The Texas Instruments TPS3700DDCT is an 18 V window voltage comparator with a 400 mV internal reference, two open-drain outputs, and a 6-pin SOT-23-THIN package. It operates from 1.8 V to 18 V and monitors one rail for overvoltage and undervoltage conditions. Its adjustable thresholds can extend detection down to 400 mV, while the open-drain outputs are rated to 18 V. A window comparator is a voltage supervisor that combines two threshold comparisons around a monitored signal. It belongs to the comparator and power-management IC hierarchy, where it is used to identify when a supply enters an allowed operating window or exits it because of an excessive low or high condition. The TPS3700 can therefore operate as a combined window detector or as two independent voltage monitors. Key features include a wide 1.8 V to 18 V supply range, threshold accuracy of -1.0% over temperature, 0.25% typical threshold accuracy, and 5.5 uA typical quiescent current. The two open-drain outputs can be pulled up to an external voltage up to 18 V. Built-in hysteresis helps reject brief glitches and maintain stable outputs, while external resistors set the monitored voltage range. The TPS3700DDCT uses two high-accuracy comparators and an internal 400 mV reference. One comparator monitors the lower threshold and the other monitors the upper threshold, allowing detection of undervoltage and overvoltage separately. The monitored voltage is scaled with external resistors, making the device suitable for systems where the rail is higher than the internal reference. Typical applications include industrial 24 V input-bus monitoring, battery-pack protection, DC power-supply fault detection, load-switch sequencing, and embedded systems that require a hardware voltage supervisor. Its low quiescent current is useful in battery-powered equipment, while the 18 V operating range supports higher-voltage industrial rails. When designing the circuit, choose resistor values to keep the sense-node voltage within the comparator input limits and use pull-up resistors appropriate for the open-drain outputs. Confirm the logic polarity of both outputs in the system controller because a fault indication can require inversion. Review the manufacturer datasheet for threshold, hysteresis, input-current, and absolute-maximum details before finalizing the PCB layout.

RFQ پەیوەندی
TPS3700DSET - 18V Window Voltage Detector | Texas Instruments
TPS3700DSET

TPS3700DSET - 18V Window Voltage Detector | Texas Instruments

The Texas Instruments TPS3700DSET is a high-voltage (18 V) window voltage detector for overvoltage and undervoltage monitoring, featuring two high-accuracy comparators with an internal 400 mV reference and two open-drain outputs rated to 18 V. It is offered in a 6-pin WSON package measuring 1.5 mm x 1.5 mm with a propagation delay of 29 us (maximum). A window voltage detector is a type of voltage supervisor or comparator circuit that monitors an input rail and asserts an alert whenever the rail falls outside a programmer-defined upper and lower threshold. It belongs to the broader family of comparators (amplifier ICs) which sit within power management ICs, and is commonly used as a safety watchdog in microprocessor and DSP power systems. Compared to single-threshold comparators, the window detector adds redundancy by failing-fast on both excursions, which is critical for ASIC rails, battery stacks, and industrial 24 V systems. Key features include a wide supply voltage range of 1.8 V to 18 V, threshold accuracy of 1.0% over temperature (0.25% typical), a low quiescent current of 5.5 uA typical, and built-in hysteresis on both comparators to reject brief glitches without false triggering. The monitored thresholds are set via external resistor dividers referenced to the internal 400 mV band-gap, and the two open-drain outputs can be pulled up to as high as 18 V for direct interface to logic rails or opto-isolators. The TPS3700DSET uses a CMOS architecture with a precision bandgap reference and twin comparators, giving it a clean offset and temperature-stable trip point across the -40C to +125C junction temperature range. The wide supply tolerance also lets it operate directly from 12 V and 15 V industrial rails without pre-regulation. Typical applications include overvoltage and undervoltage monitoring on 12 V industrial rails, battery-pack protection in multi-cell stacks, system reset generation for DSPs and microcontrollers, fault detection in PLC and motor-drive systems, and redundant safety supervision in medical and automotive subsystems. When designing with this device, choose the resistor divider ratio so the monitored voltage equals 400 mV at the desired trip point; hysteresis is fixed by internal design, but selection of the resistor network affects overall accuracy and input bias current error. This page consolidates verified distributor pricing, drop-in alternatives, and practical design notes for engineers evaluating the TPS3700DSET as a window supervisor.

RFQ پەیوەندی
TPS4141-Q1 - 1200V Configurable Divider | Texas Instruments
TPS4141-Q1

TPS4141-Q1 - 1200V Configurable Divider | Texas Instruments

The Texas Instruments TPS4141-Q1 is a high-voltage precision matched resistor divider with an integrated programmable-gain amplifier (PGA), designed for accurate high-voltage measurement in automotive and industrial applications. The device supports input voltages up to 1200V and provides four configurable divider ratios via the DIV0 and DIV1 inputs. It is available in a 10.30mm × 10.30mm SOIC-11 (DWQ) package, optimized for space-constrained automotive systems. A high-voltage precision resistor divider is a specialized analog front-end IC that scales high-voltage inputs down to a safe range for downstream ADC or microcontroller measurement. It combines matched precision resistors with a PGA to maintain accuracy across temperature and voltage extremes, eliminating the need for discrete resistor networks and trimming. This architecture reduces board area and improves measurement reliability in high-voltage environments. The TPS4141-Q1 integrates a high-voltage switch that connects or disconnects the high-voltage sense pin, providing uni-directional current blocking when disconnected. The programmable-gain amplifier supports four divider ratios using DIV0 and DIV1, enabling flexible measurement scaling for different voltage ranges. External precision reference voltage can be supplied from REF to HVGND for bi-directional voltage measurement, and switching between uni-directional and bi-directional sensing during operation is possible. The device is AEC-Q100 qualified for automotive applications, ensuring robust performance over a wide temperature range. Its high-voltage capability and integrated switch make it suitable for battery management systems, traction inverters, and industrial motor drives where precise voltage monitoring is critical. The integrated PGA and matched resistors provide high accuracy, reducing system calibration overhead. Typical applications include electric vehicle battery pack voltage monitoring, solar inverter DC bus sensing, and industrial 24V/48V system voltage measurement. The high-voltage switch allows the sense line to be disconnected for safety or power saving, while the divider ratios allow the same device to serve multiple voltage ranges. Designers should ensure proper PCB clearance and creepage distances for 1200V operation, and use the external REF for bi-directional measurements when needed.

RFQ پەیوەندی
TS3022ID - Dual High-Speed Rail-to-Rail Comparator | STMicroelectronics
TS3022ID

TS3022ID - Dual High-Speed Rail-to-Rail Comparator | STMicroelectronics

The STMicroelectronics TS3022ID is a dual high-speed comparator with rail-to-rail input stages, push-pull outputs, and operation from 2 V to 5 V supply voltage. The device is specified for a wide -40 °C to +125 °C temperature range and is packaged in an 8-SOIC package. Each comparator channel provides independent inputs and a push-pull output, making the TS3022ID suitable for dual-threshold, window-detection, line-driver, and signal-conditioning applications. A comparator is an analog integrated circuit that compares two input voltages and changes its output state when one input becomes higher than the other. The TS3022 belongs to the comparator hierarchy within analog and mixed-signal semiconductors, where its low supply-voltage operation and rail-to-rail inputs help simplify designs operating from 2 V to 5 V rails. Rail-to-rail input behavior is especially useful when the signal range approaches either supply rail, while the high-speed response supports applications requiring rapid threshold decisions. The TS3022ID is identified as a general-purpose dual comparator with push-pull outputs. Its specified supply range is 2 V to 5 V, and the datasheet describes a high-speed response time. The TS3022 family is designed for micropower operation, with supply consumption described as being as low as a few tens of microamperes. The operating temperature range of -40 °C to +125 °C supports use across industrial, automotive, and consumer temperature conditions when the surrounding system satisfies the device's electrical requirements. The rail-to-rail input architecture allows sensing of signals close to the positive or negative supply rails. This can reduce the need for artificial input biasing in low-voltage systems, although input common-mode behavior, output timing, and supply decoupling still require careful validation in the final application. Because the device contains two comparators, applications can use the two channels for independent decisions or for upper and lower thresholds that define a monitoring window. Typical uses include battery-voltage threshold detection, overvoltage and undervoltage indication, signal crossing detection, pulse-width qualification, sensor-level conditioning, and fast logic-level generation. The 8-SOIC package is also convenient for prototypes and through-hole assembly. For battery-powered equipment, the low operating voltage and micropower characteristics can help reduce system energy use, provided the input signals remain within the specified common-mode range. Designers should place supply bypass capacitance close to the device and use the pin descriptions in the manufacturer datasheet when assigning PCB tracks. Input filtering may be required when noisy signals are compared because propagation delay and input offset can cause repeated output transitions. The TS3022ID is therefore most appropriate when a designer needs two fast, low-voltage, rail-to-rail comparator channels in a conventional SOIC footprint.

RFQ پەیوەندی
TS321ID - Single 30 V 800 kHz Op Amp | Texas Instruments
TS321ID

TS321ID - Single 30 V 800 kHz Op Amp | Texas Instruments

Texas Instruments TS321ID is a single bipolar operational amplifier rated for 30 V operation, an 800 kHz gain-bandwidth product, and an 8-pin SOIC package. It is intended for cost-sensitive applications where space savings matter, making it a compact general-purpose amplifier for industrial, instrumentation, and signal-conditioning systems. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The TS321 belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. Its basic amplifier functions include voltage amplification, buffering, filtering, summing, and feedback-based control, provided the external feedback network and operating limits are respected. The verified product information identifies a single amplifier circuit, a 30 V maximum operating framework, 800 kHz bandwidth, general-purpose classification, and an 8-pin SOIC package. The bipolar architecture and low-power positioning suit cost-sensitive designs, while the SOIC footprint supports conventional surface-mount assembly. Exact offset, bias-current, noise, slew-rate, common-mode, and output-swing values require confirmation in the manufacturer datasheet before final circuit sign-off. TS321ID is useful as a general-purpose amplifier in low- and moderate-bandwidth analog paths. Its verified 800 kHz bandwidth makes it relevant to signal conditioning where the required closed-loop bandwidth is well below that level. The single-amplifier configuration can simplify designs that need one amplifier rather than a dual package, particularly in sensor interfaces, control loops, audio preamplification, and industrial measurement circuits. The principal design consideration is preserving signal headroom and stability. An 8-pin SOIC package requires adequate PCB spacing, controlled grounding, and decoupling close to the power pins. Feedback resistors, compensation components, and input or output loading determine the actual usable bandwidth and must be evaluated against the application. Because verified operating details beyond the supplied values are incomplete, engineers should consult the TS321 manufacturer datasheet before choosing component values. This page combines verified manufacturer and distributor information, structured technical context, sourcing guidance, and engineering notes. It also clearly identifies unavailable electrical parameters rather than presenting guessed values, helping engineers move from part selection to a validated TS321ID design with fewer sourcing and specification ambiguities.

RFQ پەیوەندی
TS321IDR - Single 30 V 800 kHz Op Amp | Texas Instruments (Tape & Reel)
TS321IDR

TS321IDR - Single 30 V 800 kHz Op Amp | Texas Instruments (Tape & Reel)

Texas Instruments TS321IDR is a single bipolar operational amplifier rated for 30 V operation, an 800 kHz gain-bandwidth product, and an 8-pin SOIC package. It is intended for cost-sensitive applications where space savings matter, making it a compact general-purpose amplifier for industrial, instrumentation, and signal-conditioning systems. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The TS321 belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. Its basic amplifier functions include voltage amplification, buffering, filtering, summing, and feedback-based control, provided the external feedback network and operating limits are respected. The verified product information identifies a single amplifier circuit, a 30 V maximum operating framework, 800 kHz bandwidth, general-purpose classification, and an 8-pin SOIC package. The bipolar architecture and low-power positioning suit cost-sensitive designs, while the SOIC footprint supports conventional surface-mount assembly. Exact offset, bias-current, noise, slew-rate, common-mode, and output-swing values require confirmation in the manufacturer datasheet before final circuit sign-off. TS321IDR is useful as a general-purpose amplifier in low- and moderate-bandwidth analog paths. Its verified 800 kHz bandwidth makes it relevant to signal conditioning where the required closed-loop bandwidth is well below that level. The single-amplifier configuration can simplify designs that need one amplifier rather than a dual package, particularly in sensor interfaces, control loops, audio preamplification, and industrial measurement circuits. The principal design consideration is preserving signal headroom and stability. An 8-pin SOIC package requires adequate PCB spacing, controlled grounding, and decoupling close to the power pins. Feedback resistors, compensation components, and input or output loading determine the actual usable bandwidth and must be evaluated against the application. Because verified operating details beyond the supplied values are incomplete, engineers should consult the TS321 manufacturer datasheet before choosing component values. This page combines verified manufacturer and distributor information, structured technical context, sourcing guidance, and engineering notes. It also clearly identifies unavailable electrical parameters rather than presenting guessed values, helping engineers move from part selection to a validated TS321IDR design with fewer sourcing and specification ambiguities.

RFQ پەیوەندی
TS321IDT - 30V Single 800kHz Op Amp | STMicroelectronics
TS321IDT

TS321IDT - 30V Single 800kHz Op Amp | STMicroelectronics

The STMicroelectronics TS321IDT is a single bipolar operational amplifier with an 800 kHz gain-bandwidth product, a 30 V total supply rating, and an 8-pin SOIC package. Designed for cost-sensitive applications where space efficiency matters, the TS321IDT provides a practical general-purpose amplification stage for industrial control, instrumentation, sensor interfaces, and low-frequency signal-conditioning circuits. An operational amplifier is an active analog component that uses high-gain differential feedback to amplify the difference between two input voltages. Within the product hierarchy, the TS321IDT is a general-purpose operational amplifier, a bipolar linear amplifier, and a member of the broader analog IC and semiconductor families. Its role is to increase signal amplitude while maintaining the closed-loop behavior established by external resistors or feedback networks. Key characteristics include the single-amplifier configuration, 800 kHz bandwidth, and 30 V maximum supply voltage. The manufacturer describes the device as a bipolar operational amplifier intended for compact, cost-sensitive designs. Its performance approach is intended to match or better selected industry-standard devices such as the LM358A and LM324 families, providing a familiar general-purpose solution without requiring a high-speed or precision-amplifier architecture. The TS321IDT operates from a dual supply extending to plus or minus 15 V, equivalent to a maximum total supply of 30 V. Its single-amplifier organization makes it appropriate when the PCB does not justify a dual or quad amplifier. Because it is a bipolar part rather than a CMOS amplifier, engineers should pay particular attention to input bias current, offset behavior, common-mode range, and output-swing limits during precision signal-chain design. Typical uses include buffering sensor outputs, amplifying low-level analog signals, active filtering, gain stages in measurement systems, and general industrial signal conditioning. It is particularly useful in compact equipment where an 8-pin SOIC footprint provides more mechanical flexibility than a small-outline package while maintaining low cost and straightforward PCB assembly. When laying out a TS321IDT circuit, place input, output, and decoupling connections according to the manufacturer pin-description table and keep feedback resistors close to the amplifier where practical. Confirm the required input common-mode voltage and output swing against the actual signal range. Stable operation also depends on suitable output loading and the compensation or feedback network selected for the intended gain. This page combines manufacturer and distributor information with an obsolete-lifecycle assessment, same-footprint alternatives, application guidance, and design considerations. It helps engineers distinguish a genuine circuit-compatible replacement from a merely similar single amplifier before committing a redesign to an active device.

RFQ پەیوەندی
TS321ILT - 800kHz Low-Power Op Amp | STMicroelectronics
TS321ILT

TS321ILT - 800kHz Low-Power Op Amp | STMicroelectronics

STMicroelectronics TS321ILT is a single low-power bipolar operational amplifier with an 800 kHz gain-bandwidth product, 0.4 V/µs slew rate, and operation from 3 V to 30 V, housed in a compact SOT-23-5 package. The device supports output swing from approximately -1.5 V to +1.5 V under its stated operating conditions and is designed for general-purpose signal amplification where low cost, compactness, and low power consumption are important. An operational amplifier, or op amp, is a voltage-controlled differential amplifier that uses external feedback to set its gain and filtering behavior. The TS321 belongs to the low-power operational-amplifier hierarchy, combining common-mode input range, open-loop gain, output-drive capability, and stability in a small integrated circuit. Its bipolar implementation is intended for cost-sensitive applications where the SOT-23-5 package can save board space compared with larger SOIC implementations. The TS321ILT provides an 800 kHz gain-bandwidth product and 0.4 V/µs slew rate, making it appropriate for low-frequency audio, sensor conditioning, current monitoring, and general signal-shaping circuits. Its single-amplifier configuration reduces component count in applications that do not require a dual or quad amplifier. The 3 V to 30 V supply range also permits operation from conventional 5 V, 12 V, and 24 V industrial rails when the signal levels and dissipation permit. STMicroelectronics describes the TS321 as a bipolar low-power operational amplifier intended for space-constrained, cost-sensitive designs. The device is specified to match or improve relevant performance characteristics of established industry-standard amplifiers such as LM358A and LM324 families. Because it is a single amplifier, systems requiring several independent signal channels must use multiple TS321ILT devices rather than one dual or quad package. Typical uses include low-level sensor amplification, industrial control signal conditioning, audio preamplification, battery-powered instrumentation, and general analog buffers. In a practical inverting amplifier, the closed-loop bandwidth is determined by the feedback network as well as the 800 kHz gain-bandwidth product. Stable resistor and capacitor values should be selected with operating frequency, output swing, capacitive loading, and supply voltage taken into account. The main design consideration is to avoid treating the approximate output-swing limits as full rail-to-rail operation. Input and output signals must remain inside the specified common-mode and output ranges. Designers should also check the stability behavior of the chosen feedback topology under expected source capacitance and load capacitance because those board-level conditions influence practical amplifier performance. This product page combines the TS321ILT electrical specifications, package information, application guidance, and same-footprint replacement comparisons. It also provides practical guidance on feedback design, common-mode limits, supply selection, and PCB implementation so engineers can assess the amplifier before placing it in a new analog circuit.

RFQ پەیوەندی
TS331ILT - 1.6V-5V Micropower Open-Drain Comparator | STMicroelectronics
TS331ILT

TS331ILT - 1.6V-5V Micropower Open-Drain Comparator | STMicroelectronics

STMicroelectronics TS331ILT is a single-channel, micropower, low-voltage comparator with open-drain output, rail-to-rail input capability, and a 1.6V to 5V supply range. The device is packaged in the compact SOT-23-5 surface-mount package and is intended for portable, battery-powered, sensor, and low-voltage signal-conditioning systems. Its typical supply current is as low as 20 uA, making it suitable for designs where comparator power consumption affects battery life. A comparator is an analog integrated circuit that compares two input voltages and changes its output state when one input exceeds the other by more than its input-offset threshold. The TS331 belongs to the comparator, analog IC, and low-voltage power-management hierarchy. It uses an open-drain output, allowing the output to be pulled up externally when a wired-OR arrangement, level translation, or direct digital-interface connection is required. The TS331ILT operates from 1.6V to 5V and provides rail-to-rail inputs, allowing signals to be compared close to the supply rails without relying on a conventional mid-supply input range. The listed specifications include 26 uA supply current, 1 nA input bias current, 40 nA input offset current, 5 mV input offset voltage, 4.5 uV/°C temperature drift, 720 ns propagation delay, and 79 dB channel-to-channel rejection. These characteristics balance response speed, low power, and precision for compact embedded systems. The open-drain output is useful when several signals must be combined, but it requires an external pull-up resistor in most applications. The SOT-23-5 footprint supports dense PCB layouts, although correct input polarity and output-pull-up placement are important. The comparator can be used for voltage-threshold detection, battery monitoring, sensor signal conditioning, overvoltage detection, and portable equipment. Designers should select pull-up voltage and resistor values carefully, account for the open-drain output's rise time, and verify operation across the full temperature range. The TS331 family's low supply current and rail-to-rail inputs are particularly advantageous in 1.8V, 2.5V, and 3.3V systems where the signal range may span the full supply voltage. This product page combines the manufacturer specifications, package information, practical design guidance, and drop-in replacement considerations for engineers evaluating the TS331ILT in low-voltage comparator applications.

RFQ پەیوەندی
TS339CD - Micropower Quad CMOS Comparator | STMicroelectronics
TS339CD

TS339CD - Micropower Quad CMOS Comparator | STMicroelectronics

STMicroelectronics TS339CD is a micropower quad CMOS voltage comparator containing four independent general-purpose comparators in a 14-pin SOIC package. Each comparator features open-drain CMOS outputs, extremely low input bias current, and a typical supply current consumption of 9 µA per comparator. The device provides a typical response time of 1.5 µs for a 5 mV input overdrive. A voltage comparator is an analog integrated circuit that compares two input voltages and produces a digital logic result indicating which input is higher. The TS339 belongs to the broader comparator hierarchy, where a quad comparator integrates four independent analog-to-digital decision channels. Its CMOS construction combines low power consumption with high input impedance, making it suitable for battery-operated sensing, control, and signal-conditioning systems. The four channels can compare sensor outputs with adjustable references or supervise multiple operating conditions. Key characteristics include extremely low input bias current, a typical input offset current of 1 pA, and a typical input impedance of 10^12 ohms. The open-drain outputs allow the device to interface with pull-up resistors, level shifters, wired logic buses, and mixed-voltage systems. A typical response time of 1.5 µs for 5 mV overdrive supports applications requiring fast threshold decisions without the higher supply consumption commonly associated with bipolar comparator families. The TS339 is also described as pin-to-pin and functionally compatible with the bipolar LM339 family. This compatibility makes the open-drain architecture particularly useful when an existing board uses pull-up-based logic. Each comparator can independently monitor a sensor threshold, supply rail, window comparator, or control signal. Because the outputs are open drain, multiple device outputs can share a common pull-up when the system designer confirms that the combined sink-current and timing requirements remain acceptable. Typical uses include low-power battery monitoring, industrial threshold detection, sensor interface conditioning, overvoltage protection, and embedded control systems. The 14-pin SOIC package supports conventional surface-mount assembly and provides one channel per comparator, making channel assignment straightforward in multi-parameter monitoring systems. When laying out the circuit, route the comparator inputs away from switching nodes and place the open-drain pull-up resistors close to the output pins. Confirm input common-mode limits, supply-voltage range, output sink-current capability, and the effect of external pull-up resistance before using the device in a new design. This page combines the manufacturer's functional description, package information, comparator performance characteristics, verified cross-reference candidates, and practical design guidance to support component selection, schematic review, and PCB implementation.

RFQ پەیوەندی
TS339CN - 16V Micropower Quad CMOS Comparator | STMicroelectronics
TS339CN

TS339CN - 16V Micropower Quad CMOS Comparator | STMicroelectronics

STMicroelectronics TS339CN is a micropower quad CMOS voltage comparator with four independent comparison channels, open-drain outputs, and a 14-pin through-hole DIP package. The device operates from a single supply up to 16 V, consumes 9 uA typical per comparator, provides 1 pA typical input offset current, and has input impedance of 10^12 ohms typical. These characteristics make it suitable for low-power sensing, threshold detection, and analog signal conditioning. A voltage comparator is an integrated circuit that compares two input voltages and changes its output state according to their relative polarity. The TS339 belongs to the comparator hierarchy, where a comparator is a type of analog integrated circuit and signal-conditioning semiconductor. Its four channels provide flexible logic-level sensing, while the open-drain outputs allow wired connections or external pull-up networks when a push-pull output is not required. The principal benefits of the TS339CN are its low 9 uA typical supply current per comparator, extremely low 1 pA typical input offset current, and high 10^12 ohm typical input impedance. These characteristics reduce loading on high-impedance sensors and support battery-operated or low-leakage measurement systems. The open-drain architecture also supports wired-AND behavior, provided suitable pull-up resistors and an appropriate supply voltage are used. The TS339CN is designed around a CMOS input stage and four independent comparator channels. Its response time is 1.5 us typical for a 5 mV overdrive condition, making it suitable for many threshold and control functions where microsecond-scale decisions are sufficient. The manufacturer also identifies the device as pin-to-pin and functionally compatible with the bipolar LM339, which can simplify qualification of an existing comparator-based design. Typical uses include battery-powered sensor interfaces, low-voltage monitoring circuits, threshold detection, window comparators formed from pairs of channels, and general control logic. Because the outputs are open-drain, an application must include pull-up resistors whenever a valid high output level is required. The four-channel architecture also allows multiple independent measurements from a single IC. For a new through-hole design, allow adequate clearance around the 14-pin DIP footprint and route sensitive input traces away from switching nodes and output pull-up networks. Input common-mode range, output saturation levels, supply current, and output timing should be checked against the manufacturer datasheet for the intended supply voltage and temperature conditions. This page organizes the key TS339CN specifications, comparison information, practical design notes, and verified sourcing references. It also highlights the device's open-drain output architecture, low-power operation, and LM339 compatibility considerations for engineers evaluating PCB and firmware changes.

RFQ پەیوەندی
TS339ID - Micropower Quad CMOS Comparator | STMicroelectronics
TS339ID

TS339ID - Micropower Quad CMOS Comparator | STMicroelectronics

STMicroelectronics TS339ID is a micropower quad CMOS voltage comparator with four independent open-drain outputs, a supply range of ±8 V to ±16 V, and a 14-pin SOIC package. Each comparator typically consumes 9 µA, while the device is designed for low-input-bias and low-input-offset-current measurements. A voltage comparator is an analog semiconductor that compares two input voltages and produces a digital logic result indicating which input is higher. The TS339ID belongs to the comparator hierarchy, combining four general-purpose channels in one package. Its CMOS construction reduces current consumption compared with a conventional bipolar LM339, while the open-drain outputs support wired logic, level translation, and systems using external pull-up resistors. Each channel provides non-inverting and inverting inputs. Key characteristics include extremely low input bias current, a typical input offset current of 1 pA, and typical input impedance of 10^12 ohms. The TS339ID is pin-to-pin and functionally compatible with the bipolar LM339 device. Its typical response time is 1.5 µs for a 5 mV overdrive, making it suitable for threshold detection rather than high-speed signal-chain comparison. The open-drain output architecture requires an external pull-up resistor when a logic-high level is needed. Because the output stage can pull the node low but cannot actively drive it high, several comparator outputs can be combined in a wired-AND arrangement. This characteristic is useful for supervision, window detection, and fault signaling, although circuit design must account for the pull-up value, output leakage, and bus rise time. Typical uses include power-supply sequencing, battery monitoring, overvoltage and undervoltage detection, temperature-control thresholds, industrial sensor interfaces, and simple digital control systems. The quad arrangement reduces board area and component count when four independent thresholds are required, particularly in industrial monitoring, instrumentation, and embedded-control equipment. Designers should verify input common-mode limits, output pull-up requirements, and absolute maximum supply voltage against the manufacturer datasheet before implementation. The open-drain node should include a pull-up to a valid logic rail, and unused inputs must be tied to a defined potential rather than left floating. PCB layout should keep sensitive input traces away from switching nodes and high-current return paths. This product overview combines the exact TS339ID characteristics with practical guidance for open-drain logic, threshold detection, PCB implementation, and comparison against pin-compatible LM339-family devices. It also organizes the available technical information for engineers evaluating power consumption, response time, input impedance, package compatibility, and lifecycle-sensitive redesigns.

RFQ پەیوەندی
TS339IN - Micropower Quad CMOS Comparator | STMicroelectronics
TS339IN

TS339IN - Micropower Quad CMOS Comparator | STMicroelectronics

The STMicroelectronics TS339IN is a micropower quad CMOS voltage comparator with four independent channels, a 1.35 V to 16 V operating supply range, and a 14-DIP package. It features a 1 pA input bias current, 5 mV input offset voltage, and 1.5 microsecond response time, making it suitable for low-power signal conditioning. A voltage comparator is an analog integrated circuit that compares two input voltages and produces a digital output indicating which input is higher. The TS339IN belongs to the comparator hierarchy, where four open-drain channels can monitor thresholds, detect crossings, supervise signals, or support feedback control. Its CMOS implementation provides low input bias current and low power consumption compared with classic bipolar comparator families. The TS339IN includes four general-purpose comparator channels with CMOS, open-drain outputs. The 1.35 V to 16 V supply range allows operation from low-voltage battery systems through conventional industrial rails, while the 1 pA typical input bias current reduces loading on high-impedance sensors. A 5 mV typical input offset voltage defines the baseline comparison accuracy, and the 1.5 microsecond response time supports threshold decisions without adding substantial propagation delay. Each comparator channel operates independently, allowing one device to implement four related decisions. The open-drain output architecture requires an external pull-up resistor, but it also provides flexible output-interface options. Designers can use the pull-up voltage to match downstream logic levels and can connect open-drain outputs in wired-AND configurations where appropriate. Dual-supply operation is supported up to a total supply span of 8 V. Typical uses include industrial sensor interfaces, battery-powered monitoring, digital control thresholds, window comparators, and general signal-conditioning systems. The low input bias current is particularly useful with resistive dividers, sensor outputs, and leakage-sensitive measurement circuits. The 14-DIP format also supports through-hole assembly and repairable industrial equipment where surface-mount packages would be inconvenient. When designing around the TS339IN, account for the open-drain output when selecting pull-up values and external logic supply levels. Keep input and output paths away from noisy switching nodes, and verify offset and common-mode behavior against the minimum signal separation required by the application. The operating range of -40°C to +125°C supports industrial temperature environments when the complete assembly is properly qualified. This product data combines the electrical characteristics, package details, cross-reference options, and practical design guidance needed to evaluate TS339IN. It also organizes pin assignments, application considerations, and compatible alternatives into a concise engineering reference for prototype development and production sourcing.

RFQ پەیوەندی
TS339IPT - Micropower Quad Open-Drain Comparator | ST
TS339IPT

TS339IPT - Micropower Quad Open-Drain Comparator | ST

The STMicroelectronics TS339IPT is a micropower quad CMOS voltage comparator with four open-drain outputs, extremely low typical supply current of 9 μA per comparator, and operation across a 3 V to 16 V supply range. The device is packaged in a 14-pin TSSOP package and is intended for low-voltage, low-power signal-conditioning systems. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input exceeds the inverting input. The TS339 belongs to the comparator hierarchy, combining four independent comparator channels with CMOS input stages and open-drain outputs. The TS339 family provides a practical alternative to higher-current bipolar LM339-family comparators in battery-powered and portable equipment. Key features include four comparator channels, a typical input common-mode range extending from ground to VCC minus 1.5 V, an output sink capability of 40 mA, and open-drain outputs that can be pulled up to a chosen external voltage. The low 9 μA typical current per comparator supports low-power sensing, while the 16 V maximum supply rating permits operation from a 3 V supply through higher-voltage industrial rails. These characteristics make the device suitable for threshold detection, battery monitoring, signal conditioning, and sensor interfaces. The open-drain architecture provides flexible output voltage levels but requires an external pull-up resistor on every output. The pull-up resistor establishes the high output level, while the output transistor actively pulls the line toward ground. This arrangement permits wired logic, level translation, and wired-AND behavior, although designers must account for the rise time created by the resistor and total bus capacitance. Input common-mode and output-level requirements must be checked against the actual supply voltage. Typical applications include portable battery monitoring, industrial sensor interfaces, window or level comparators, overvoltage detection, and low-power control systems. Because the TS339IPT is specified for the industrial temperature range, it can also be used in equipment exposed to temperatures from −40 °C to +125 °C. The 14-pin TSSOP package supports compact, surface-mount assembly but is relatively narrow and requires careful component placement. When designing a PCB around the TS339IPT, route the comparator inputs away from switching nodes and provide a short, quiet ground reference for each sensing point. Place pull-up resistors close to the corresponding open-drain outputs to minimize trace capacitance and improve switching speed. Confirm that the logic high generated by the pull-up meets the receiving device's input threshold, and verify that no signal connected to either comparator input exceeds the datasheet's absolute maximum ratings. This page combines the TS339IPT's principal electrical characteristics, verified package and distributor information, application guidance, comparison data, and practical replacement considerations to support faster component selection and board-level design.

RFQ پەیوەندی
TS3702CD - Micropower Dual CMOS Comparator | STMicro
TS3702CD

TS3702CD - Micropower Dual CMOS Comparator | STMicro

The STMicroelectronics TS3702CD is a dual micropower CMOS voltage comparator with 9 uA typical supply current per comparator, a 2 us typical response time, and push-pull outputs, packaged in an 8-pin SOIC. The device provides two independent comparators with high input impedance, making it suitable for low-power sensing and threshold-detection circuits. A voltage comparator is an analog integrated circuit that compares an input voltage against a reference voltage and changes its digital output state when the compared signals cross. The TS3702 belongs to the comparator class within analog and mixed-signal semiconductors. Its push-pull CMOS outputs eliminate the external pull-up resistor normally required by open-collector comparators such as the bipolar LM393, reducing component count and simplifying output interfacing. The TS3702 operates from single or dual supplies and supports input common-mode ranges extending below and above the supply rails. Typical supply current is 9 uA per comparator, approximately twenty times lower than a bipolar LM393 according to the manufacturer datasheet. Input impedance is 10^12 ohms typical, helping minimize loading on high-impedance sensors. Maximum input offset voltage is listed as 6.5 mV, so applications requiring tighter threshold accuracy should include offset and propagation-delay error in the system budget. Each channel contains an input stage, a logic decision element, and a CMOS push-pull output driver. The push-pull stage sources or sinks output current, allowing direct connection to CMOS logic inputs. Because the output actively drives both states, the device does not need a pull-up resistor, although PCB design should still provide adequate output-current margin and account for the input capacitance of the following stage. Typical uses include battery-powered threshold detection, window comparators, sensor signal conditioning, overvoltage monitoring, temperature-setpoint control, and portable instrumentation. The dual-channel configuration also allows one package to implement a two-threshold window monitor or compare two independent sensor signals without adding a second comparator package. For low-noise analog signals, keep comparator input traces short, place the input reference network close to the device, and avoid routing them beside switching-node traces. Add supply-bypass capacitance near the power pins and verify that the output state never conflicts with another push-pull driver. Because the output is actively driven, do not connect two comparator outputs together without an isolation device. This page combines package and pin information with application guidance, drop-in candidate evaluation, comparison parameters, and practical design notes that help engineers move from datasheet review to a working low-power analog front end.

RFQ پەیوەندی
TS3702CN - 9µA Dual CMOS Comparator | STMicroelectronics
TS3702CN

TS3702CN - 9µA Dual CMOS Comparator | STMicroelectronics

The STMicroelectronics TS3702CN is a micropower dual voltage comparator featuring 9 µA typical supply current per comparator, a 1.5 µs response time, and a 6.5 mV maximum input offset voltage. The device is packaged in an 8-pin DIP and uses a CMOS push-pull output stage. Its two independent channels support differential input comparisons with single or dual power-supply operation. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the measured relationship crosses a defined threshold. The TS3702 belongs to the comparator hierarchy within analog signal-conditioning integrated circuits. Two integrated channels in one package provide a practical way to monitor two thresholds, control one analog system, or implement complementary sensing functions while reducing board area. The TS3702's principal advantages are its very low 9 µA typical current consumption per comparator, CMOS input characteristics, and push-pull outputs. Unlike the open-collector outputs used by conventional bipolar comparators such as the LM393 family, push-pull outputs can drive a defined high or low state without an external pull-up resistor. This can simplify output interfacing and reduce board space, although the resulting output current and transition behavior must remain within the device specifications. According to the STMicroelectronics manufacturer datasheet, the TS3702 can operate from a single positive supply or from split positive and negative supplies. The available comparison information identifies a dual-supply operating span from ±1.35 V to ±8 V, with ±3 V and ±5 V listed as typical dual-supply configurations. Input offset voltage is specified up to 6.5 mV, while propagation delay can reach 1.5 µs. These values position the device for low-power threshold detection rather than high-speed timing applications. Typical uses include battery-powered sensor conditioning, overvoltage and undervoltage detection, temperature-limit monitoring, window comparators, and low-power control loops. The two channels may also monitor complementary supply or signal thresholds. A push-pull output is particularly useful when the next stage requires a CMOS-compatible logic level and the added quiescent current of an external pull-up network is undesirable. Designers should verify input common-mode range, output-current limits, supply sequencing, and output behavior for every operating condition using the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, while comparator inputs require short, quiet traces that minimize coupling from switching nodes. The DIP package is suitable for through-hole assembly and prototypes, but modern compact products may require a different package variant and corresponding PCB redesign. This product page organizes the TS3702CN electrical characteristics, verified drop-in references, pin assignments, comparison parameters, and practical design guidance into one engineering-focused resource. It also distinguishes documented drop-in options from alternatives that require different packages or output structures, helping designers make a PCB-compatible sourcing decision.

RFQ پەیوەندی
TS3702ID - Micropower Dual CMOS Comparator, 9uA, SOIC-8 | STMicroelectronics
TS3702ID

TS3702ID - Micropower Dual CMOS Comparator, 9uA, SOIC-8 | STMicroelectronics

The STMicroelectronics TS3702ID is a micropower dual CMOS voltage comparator that integrates two independent general-purpose comparators in an 8-pin SOIC-8 (SO-8) surface-mount package. Each channel consumes only 9 uA typical supply current, presents a 10^12 ohm typical input impedance and offers a 2.3 us typical response time, making it roughly twenty times lower in consumption than the classic bipolar LM393 reference circuit. A voltage comparator is an analog integrated circuit that compares two input voltages and switches its output according to which input is higher. As a sub-type of the amplifier family, a comparator sits between raw sensing elements and a digital control path: it belongs to the broader hierarchy of analog ICs, amplifiers and comparators, signal conditioning, and ultimately power management and interface ICs. Its job is to translate a small analog difference into a logic-level decision without introducing supply noise or consuming significant battery current. Key features of the TS3702ID include a push-pull CMOS output stage, which removes the external pull-up resistor normally required by open-collector comparators and saves both board area and standby current. The device accepts a single supply from 2.7 V to 16 V or dual supplies from +/-1.35 V to +/-8 V, operates down to ground at the input common-mode range, and draws only 1 pA typical input offset current. The manufacturer also specifies pin-to-pin and functional compatibility with the bipolar LM393, which eases migration between designs. Internally the TS3702ID uses a CMOS process, giving near-zero input bias current and rail-to-rail CMOS output levels rather than saturated bipolar levels. The push-pull stage sources and sinks current actively, so output transitions are fast and the logic levels remain valid at low supply voltages where open-collector comparators would need extra headroom to guarantee a valid high level. Typical applications include battery-powered sensor and threshold monitoring, window comparators for over/undervoltage detection, low-current alarm and wake-up circuits, portable instrumentation, and general-purpose level detection in industrial control boards. When designing with the TS3702ID, remember that the output stage is push-pull, not open-collector, so no external pull-up resistor should be added. Confirm the input common-mode limits against the actual supply voltage in the manufacturer datasheet, and keep the input bias network impedance high so the 1 pA offset current does not shift the threshold. This page consolidates the manufacturer datasheet figures, distributor availability, package details, drop-in alternatives and practical design notes into one engineering reference that goes beyond the raw component listing.

RFQ پەیوەندی
TS3702IN - Micropower Dual Comparator | STMicroelectronics
TS3702IN

TS3702IN - Micropower Dual Comparator | STMicroelectronics

STMicroelectronics TS3702IN is a micropower dual CMOS voltage comparator with 9 µA typical supply current per comparator, 1.5 µs maximum response time, and 6.5 mV maximum input offset voltage in an 8-pin PDIP package. Its two independent comparator channels use push-pull CMOS outputs, eliminating the external pull-up resistor normally required by open-collector comparators. A voltage comparator is an analog mixed-signal component that compares two input voltages and produces a logic-level output indicating which input is higher. The TS3702IN belongs to the comparator hierarchy within integrated circuits and analog signal-conditioning ICs. Its micropower operating current makes it suitable for battery-powered equipment where continuous supply consumption must remain low, while its dual-channel configuration provides two comparison functions in one package. The principal features are low power consumption, CMOS-compatible push-pull outputs, low input offset voltage, and a response time suitable for general-purpose signal detection. According to the STMicroelectronics TS3702 product page, the TS3702 consumes 9 µA typical per comparator, approximately twenty times less than a bipolar LM393. The 16 V maximum supply rating provides headroom for conventional 5 V and low-voltage industrial systems, while the 600 pA input bias current limits disturbance of high-impedance sensing nodes. Internally, the device combines CMOS input stages with two independent comparator channels. The push-pull output architecture actively drives both logic states, making the outputs suitable for direct connection to compatible CMOS inputs. This differs from open-collector comparators, which require an external pull-up resistor and can present slower rising edges when additional capacitance must be charged. Board designers should still check the output timing and load limits in the manufacturer datasheet when driving unusually long traces or high-capacitance nodes. Typical uses include battery-powered threshold detection, sensor signal conditioning, overvoltage and undervoltage monitoring, window comparators, and simple control loops. A second application is industrial sensing where low 9 µA typical current per comparator helps limit standby consumption. The TS3702IN can also supervise a divided supply rail by comparing its scaled voltage against a reference derived from another node. The principal design consideration is logic compatibility. Push-pull outputs must not be tied together or connected to a pull-up resistor in the manner used with open-collector outputs. Input common-mode range, output voltage levels, and propagation-delay limits must be checked against the actual supply voltage and connected logic family before finalizing the circuit. This product page combines the manufacturer specifications with package, sourcing, and replacement guidance for engineers evaluating the TS3702IN. It also identifies drop-in alternatives that retain the same 8-pin through-hole footprint, helping PCB designers compare functionality without introducing an unintended package migration.

RFQ پەیوەندی