بەرهەمەکان (3,200+)

MP7748SGF - 2x30W Stereo Class D Amplifier | Monolithic Power Systems Inc.
MP7748SGF

MP7748SGF - 2x30W Stereo Class D Amplifier | Monolithic Power Systems Inc.

The Monolithic Power Systems Inc. MP7748SGF is a Class D audio power amplifier rated for 2 x 30 W stereo single-ended output or 60 W mono bridge-tied-load output. The verified manufacturer search material identifies a 28-pin TSSOP exposed-pad package and an integrated 200 mΩ power-MOSFET output stage. It is designed for compact, high-efficiency speaker-drive solutions where analog Class A/B fidelity is desired with Class D operating efficiency. A Class D audio amplifier is a switching power amplifier that delivers energy to speakers through a continuously switching output stage. Compared with a linear Class A/B amplifier, its practical advantage is lower output-stage dissipation and higher efficiency, although filtering is still required to remove switching-frequency energy. In stereo mode, the MP7748SGF uses two independent single-ended speaker outputs; in mono mode, its outputs can be combined in bridge-tied-load configuration to double the voltage swing delivered to one speaker while avoiding a DC offset across the speaker. Key verified features include integrated 200 mΩ power MOSFETs, startup and shutdown pop-elimination circuitry, and short-circuit protection. The manufacturer material describes a proprietary variable-frequency topology intended to provide high fidelity comparable to Class A/B amplification. Under 24 V VDD, the manufacturer material states capability for 30 W per channel into a 4 Ω load in single-ended operation and 60 W into an 8 Ω speaker in bridge-tied-load operation. The exposed pad supports heat transfer from the power stage, but thermal performance still depends on PCB copper, layer count, airflow, load duration, and adjacent heat sources. Typical uses include consumer speakers, multimedia audio, compact stereo systems, sound bars, portable powered speakers, and mono subwoofer or full-range speaker designs. The MP7748SGF is appropriate when local analog amplification is preferred and a Class D efficiency advantage is useful, but it may not suit systems that require a digital input because the verified material identifies an analog-input family. For layout, follow the manufacturer datasheet connection and thermal recommendations exactly. Keep the exposed-pad thermal path unobstructed, provide adequate input and output filtering, and account for switching-node layout and ground-return control. Do not assume a generic 28-pin footprint or replace the amplifier without checking exposed-pad geometry, pin names, thermal requirements, and load compatibility. This page consolidates manufacturer specifications, distributor listings, cross-reference evidence, and practical Class D design guidance. Exact pricing, lifecycle status, complete electrical limits, and several physical details were not supplied by the verified sources and are therefore identified rather than guessed.

RFQ پەیوەندی
MP7748SGF-Z - 60W Class D Audio Amplifier | MPS
MP7748SGF-Z

MP7748SGF-Z - 60W Class D Audio Amplifier | MPS

The Monolithic Power Systems MP7748SGF-Z is a fully integrated Class D audio amplifier capable of delivering 2 x 30 W stereo single-ended output or 60 W mono bridge-tied-load output in a 28-pin TSSOP-EP package. The verified family data identifies integrated 200 mΩ power MOSFETs, startup and shutdown pop-elimination circuitry, and short-circuit protection. A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to drive speakers with high efficiency while filtering the switching waveform into an audio output. It belongs to the audio amplifier hierarchy, where its efficiency and output power can exceed those of conventional linear Class A/B amplification. The MP7748S uses proprietary variable-frequency topology and is designed for compact consumer-audio and multimedia systems. The amplifier supports two 30 W channels into 4 Ω speakers when configured as single-ended stereo, or one 60 W channel into an 8 Ω speaker when its outputs are combined in bridge-tied-load mode. This flexibility allows one device family to address stereo speakers, a mono subwoofer, a compact monitor, or a consumer-audio terminal. Integrated power MOSFETs reduce external component count and simplify the output stage. The supplied manufacturer search result states that the MP7748S provides high fidelity comparable to Class A/B amplification at high Class D efficiency. Variable-frequency operation can also reduce low-frequency interference concerns associated with a fixed switching frequency, although frequency-dependent EMI evaluation remains essential. Input filtering, output reconstruction, speaker load, thermal conditions, and supply decoupling determine final acoustic and system performance. Typical uses include compact stereo systems, portable or multimedia speakers, home-theater amplification, powered subwoofers, smart displays, and compact consumer-audio products. In single-ended operation, each channel drives a speaker independently; in bridge-tied-load operation, the two outputs work together so the speaker sees the differential voltage without tying either output to ground. Layout is critical because the exposed pad and output traces carry power while the audio input is sensitive to switching and ground noise. Place input filtering and decoupling near their associated pins, keep loudspeaker outputs away from the analog input, and use the manufacturer’s datasheet land pattern and output-filter recommendations. Verify thermal performance, speaker impedance, and protection behavior in the final enclosure. This page combines verified manufacturer and distributor data with application guidance, source traceability, and drop-in-replacement analysis. It explicitly distinguishes confirmed MP7748SGF information from target-ordering and package details that were not supplied, avoiding unsupported electrical or commercial assumptions.

RFQ پەیوەندی
MP7751GF-Z - 2x20W Stereo Class-D Audio Amplifier | MPS
MP7751GF-Z

MP7751GF-Z - 2x20W Stereo Class-D Audio Amplifier | MPS

The Monolithic Power Systems MP7751GF-Z is a fixed-frequency, stereo, analog-input Class-D audio amplifier delivering 2 x 20 W into 8-ohm speakers at an 18 V supply. It operates from 5 V to 26 V and is packaged in a 28-pin TSSOP with exposed pad. The integrated solution is designed to reduce board size by combining 240 mΩ power MOSFETs, start-up and shutdown pop elimination, short-circuit protection, and advanced EMI performance. A Class-D audio amplifier is a switching power amplifier within the broader audio-amplifier and power-management semiconductor hierarchy. Instead of continuously dissipating a signal through linear output devices, it uses efficient switching stages to drive a speaker load. The MP7751 uses a bridge-tied-load topology, which means each speaker is connected between two switching outputs rather than to ground. This improves output-voltage utilization and can provide substantial audio output from a compact integrated circuit. Key verified features include a 5 V to 26 V supply range, stereo operation, 20 W per channel at 18 V into 8 ohms, and a fixed switching-frequency implementation. The integrated 240 mΩ power MOSFETs reduce external component count, while short-circuit protection improves robustness in speaker-drive applications. The exposed thermal pad supports heat transfer through the PCB, although thermal design must account for the amplifier dissipation and copper area. The MP7751GF-Z is positioned for analog audio systems requiring compact stereo amplification, including powered speakers, consumer audio equipment, small multimedia systems, and portable or compact audio products. Compared with a discrete MOSFET output stage, the integrated amplifier simplifies layout and reduces component count. Compared with a higher-power external amplifier, the MP7751 is appropriate when the required speaker load is near 20 W per channel and the available supply is within its verified operating range. The main design consideration is power-thermal management. Class-D efficiency does not eliminate heat: output-stage loss still depends on supply voltage, load impedance, output power, switching characteristics, and copper thermal resistance. Layout should follow the manufacturer datasheet exactly, preserve the exposed-pad connection, keep switching loops compact, and provide adequate input filtering. Speaker wiring should remain short and separated from sensitive analog input routing to reduce EMI pickup and pop artifacts. This page combines verified manufacturer and distributor information with practical guidance on analog-input filtering, exposed-pad thermal design, speaker protection, and application selection. Pricing and availability must be checked as of 2026-10-22 because distributor inventory and terms can change without notice.

RFQ پەیوەندی
MP7752GF - 2x15W Stereo Class D Audio Amplifier
MP7752GF

MP7752GF - 2x15W Stereo Class D Audio Amplifier

The Monolithic Power Systems Inc. MP7752GF is a stereo Class D audio amplifier IC with 2 x 15 W output power, an 18 V supply rating, analog input, fixed-frequency operation, and bridge-tied-load speaker drive. It is supplied in a 28-pin TSSOP with exposed pad. The device is designed for compact, integrated Class D audio systems where output-stage inductors and LC filters are not required. An inductorless Class D amplifier is a switching audio amplifier that uses integrated power MOSFETs to deliver high output power efficiently while driving speakers directly in a bridge-tied-load arrangement. The MP7752GF belongs to the amplifier-IC, audio-amplifier, Class D, and power-management semiconductor hierarchy. Its integrated power stage, short-circuit protection, start-up/shutdown pop elimination, and advanced EMI performance support compact consumer audio products. The verified source data identifies the MP7752GF as a 2-channel stereo Class D amplifier rated at 18 V and 2 x 15 W. It integrates 240 milliohm power MOSFETs and uses bridge-tied-load output topology. The fixed-frequency switching architecture removes the need for an external output inductor, reducing board area compared with conventional filter-based Class D solutions. The exposed-pad package also provides a thermal connection from the power stage to the PCB. Typical applications include compact stereo speakers, portable consumer audio products, multimedia systems, USB or docking audio products, and other low-voltage audio equipment requiring efficient amplification. In a typical bridge-tied-load implementation, the two amplifier outputs drive the two speaker terminals, so the speaker load sees differential voltage rather than being connected to ground. The principal design consideration is thermal management. Although the integrated MOSFETs eliminate external output inductors, Class D switching and bridge-tied-load operation still generate heat that must leave through the exposed pad and surrounding copper. PCB thermal vias, adequate copper area, and careful placement of input, power, and output connections are important for reliable operation. This product page combines the verified distributor description, manufacturer datasheet identification, package information, and cross-reference results. Pricing, exact operating conditions, protection thresholds, efficiency curves, and complete pin-level electrical characteristics must be confirmed against the manufacturer datasheet before design release.

RFQ پەیوەندی
MP7752GF-Z - 2x15W Stereo Class-D Amplifier | MPS
MP7752GF-Z

MP7752GF-Z - 2x15W Stereo Class-D Amplifier | MPS

The Monolithic Power Systems MP7752GF-Z is a two-channel, analog-input, inductorless Class-D stereo audio amplifier rated for 2 x 15 W output into 8-ohm speakers. It operates from a 5 V to 18 V supply and uses bridge-tied-load (BTL) outputs, in a 28-pin TSSOP-EP package. A Class-D audio amplifier converts a comparatively low-power analog input into a high-efficiency PWM power stage that delivers energy directly to the speaker load. The MP7752 integrates 240 mOhm power MOSFETs, eliminating the need for external output inductors and reducing board area. Its fixed-frequency architecture supports filterless operation when the system does not require a reconstructed low-pass signal at the speaker output. Verified features include a 2 x 15 W BTL output configuration, two pairs of differential inputs, short-circuit protection, startup and shutdown pop suppression, automatic mute or no-noise switching, automatic power saving, and 90% efficiency. The listed THD is 0.5%, with a -60 dB figure and 100 dB also appearing in the verified distributor listing, although the exact test conditions for those entries require confirmation in the manufacturer datasheet. The MP7752GF-Z is suitable for compact stereo audio products, multimedia speakers, USB or Bluetooth audio accessories, soundbars, and powered speaker systems. Its differential input architecture helps reject common-mode noise when the source is balanced or when a suitably designed input network is used. The exposed-pad package supports thermal performance, but actual output power and distortion depend strongly on supply voltage, speaker impedance, PCB copper, thermal design, and load tolerance. The key design consideration is the exposed thermal pad. Place the pad over a continuous ground or thermal-copper area with multiple short vias and follow the manufacturer land pattern. Decouple the supply locally, keep speaker outputs away from sensitive input routing, and validate EMI performance because Class-D PWM outputs contain high-frequency energy. Confirm all absolute maximum ratings, pin functions, thermal resistance values, and application limits against the official datasheet before release. This page combines verified distributor specifications, the official MPS product-document result, package and sourcing information, and engineering-focused usage guidance. Pricing and availability remain distributor-dependent, so the tiers shown here should be treated as reference data only, as of 2026-10-22, unless separately confirmed.

RFQ پەیوەندی
MP7770GF-Z - 90W Class-D Audio Amplifier | MPS
MP7770GF-Z

MP7770GF-Z - 90W Class-D Audio Amplifier | MPS

The Monolithic Power Systems MP7770GF-Z is an analog Class-D audio amplifier IC capable of delivering 2 x 45 W stereo single-ended output or 90 W mono bridge-tied-load output from a 36 V VDD supply. It is packaged in a 28-TSSOP-EP package. What is a Class-D audio amplifier? A Class-D amplifier is an audio power amplifier whose switching output stage delivers energy to a speaker more efficiently than a traditional linear Class-A/B design. The MP7770 uses MPS proprietary variable-frequency topology to combine high output power with compact integration. It supports either two single-ended speaker channels or one bridge-tied-load speaker, making it adaptable to stereo and compact high-power audio systems. The MP7770 integrates 100 mOhm power MOSFETs, startup and shutdown pop-elimination circuitry, and short-circuit protection. According to the manufacturer product page, its fully integrated amplifier architecture reduces solution size. The MP7770GF is also available on the EV7770-F-00A evaluation board for single-ended configurations, providing a practical platform for evaluating 45 W per channel into 4 Ohm speakers at up to 36 V VDD. The manufacturer datasheet identifies the MP7770GF family as an analog Class-D audio amplifier with variable-frequency operation. The output topology determines the power configuration: two channels can each deliver 45 W into 4 Ohm speakers in single-ended mode, while a bridged configuration can deliver 90 W into 8 Ohm. The bridge-tied-load topology is useful when the system requires one higher-power speaker output rather than two independent channels. Typical applications include compact stereo audio systems, multimedia speakers, powered subwoofers, consumer audio equipment, and industrial or communications speaker systems. When designing the board, provide a clean supply path, adequate thermal copper around the exposed pad, and speaker protection appropriate to the selected output topology. The most important design tradeoff is power delivery versus thermal and supply capability. At 36 V VDD, the stated output ratings are 45 W per channel or 90 W in bridged mode, but actual continuous output depends on speaker impedance, supply voltage, thermal conditions, and the amplifier's operating limits. This page consolidates the verified product data, comparison fields, alternatives, and design guidance relevant to MP7770GF-Z. According to the verified data, MP7770GF-Z is offered as a 28-TSSOP-EP Class-D audio amplifier by Monolithic Power Systems and is associated with the MP7770GF family.

RFQ پەیوەندی
MP7782DF-LF-Z - 50W Mono Class-D Amplifier | MPS
MP7782DF-LF-Z

MP7782DF-LF-Z - 50W Mono Class-D Amplifier | MPS

Monolithic Power Systems MP7782DF-LF-Z is a 50 W mono bridged Class-D audio amplifier IC supplied in a 20-pin TSSOP package with an exposed pad. It operates from a 9.5 V to 24 V supply, supports operation from -40 °C to +85 °C, and is specified as a lead-free, RoHS-compliant 20-TSSOP device. The verified distributor data identifies the component as a one-channel Class-D amplifier intended for compact, efficient audio systems. A Class-D audio amplifier is a switching power amplifier that uses transistor output stages to deliver audio energy with relatively low internal power loss. The MP7782DF-LF-Z belongs to the amplifier IC hierarchy: Class-D amplifier, audio amplifier IC, analog signal-processing IC, and power-management semiconductor. Its bridged mono configuration is suited to powered speakers, portable audio equipment, soundbars, compact consumer systems, and industrial audio products where one speaker is driven from two amplifier outputs. The headline electrical ratings are a 50 W maximum output power, a 9.5 V to 24 V supply-voltage range, and a monobridge Class-D output topology. Its 20-TSSOP exposed-pad package supports compact PCB layouts while providing a designated thermal-coupling area. The -40 °C to +85 °C operating-temperature range supports both consumer and extended-temperature industrial environments when the complete system is designed for the applicable environmental limits. The MP7782DF family is described by Monolithic Power Systems as a second-generation, fully integrated audio-amplifier solution intended to reduce solution size. In a bridged output arrangement, the two power-output nodes drive a speaker differentially, increasing usable output voltage into the load compared with a conventional single-ended output. The exposed thermal pad should be connected to the PCB ground plane according to the manufacturer layout guidance. Typical uses include compact speaker enclosures, portable or battery-powered audio products, multimedia speaker systems, USB or desktop audio amplification, soundbar subwoofer sections, and industrial notification or intercom equipment. System designers must account for speaker impedance, supply capability, output filtering, thermal performance, and EMI generated by the Class-D output stage. The main design consideration is power delivery and heat management. A 50 W device rating does not guarantee 50 W continuous output at every supply voltage, speaker impedance, or ambient temperature. Validate the operating point against the manufacturer data, use an adequately sized supply, and provide generous exposed-pad copper and thermal vias. High-current speaker traces also require short, wide routing to reduce voltage loss and EMI radiation. This product data combines verified distributor specifications, a 50 W application-oriented overview, sourcing guidance, and design-focused comparisons. It distinguishes documented ratings from unavailable detailed pin, electrical-limit, and alternative-part data so engineers can distinguish verified facts from items that still require confirmation in the manufacturer datasheet.

RFQ پەیوەندی
MP8046DF-LF-Z - 5A 28V Class-D Driver | MPS
MP8046DF-LF-Z

MP8046DF-LF-Z - 5A 28V Class-D Driver | MPS

Monolithic Power Systems MP8046DF-LF-Z is a 5 A, 28 V configurable Class-D audio power driver in a 20-pin TSSOPF exposed-pad package. The device supports two independent single-ended channels or a complementary bridge-tied-load configuration, giving designers one PWM input power driver for stereo, multichannel, and external-MOSFET audio power stages. A Class-D audio power driver is a semiconductor that accepts PWM-modulated audio signals and controls external power MOSFETs. The MP8046 belongs to the hierarchy PWM input power driver, audio power IC, amplifier IC, and power-management semiconductor. Its dual-channel architecture allows independent operation, while the bridge-tied-load option can increase output voltage to the load and eliminate the need for an output coupling capacitor. The manufacturer identifies a 28 V maximum supply capability and a 5 A device rating. The operating range begins at 7.5 V, and the supplied distributor listing reports a 2.4 mA current figure. Protection and control features include low-current shutdown, standby mode, input undervoltage protection, current limit, thermal shutdown, and a fault-flag output. Both channels use standard logic signals, simplifying control from a digital audio processor or Class-D PWM controller. The MP8046 is available in a 20-pin TSSOP with exposed pad, identified by distributors as TSSOPF-20-EP. The exposed pad supports heat transfer from the driver to the PCB, which is important because MOSFET-gate drive and power-stage losses can create substantial board-level heating. The manufacturer also publishes the EV8046DF-00A evaluation board for evaluating this high-current, dual-channel half-bridge device with PWM-modulated inputs. Typical uses include stereo single-ended audio outputs, bridge-tied-load speaker drives, powered speaker systems, soundbars, and external-MOSFET Class-D stages. Configuration flexibility is particularly useful when one amplifier platform must support several output topologies or channel counts. The PWM inputs allow the upstream modulator to retain control over modulation, dead time, and signal processing. When designing the power stage, verify that external MOSFETs, gate resistors, input filtering, and the PCB thermal design satisfy the driver requirements. The exposed pad must be connected to the appropriate ground plane and thermal copper rather than treated as an unused package lead. Account for shutdown behavior, undervoltage lockout, current limiting, and fault-flag handling in the system control sequence. This product record combines the verified manufacturer capabilities, distributor specifications, ordering references, and design-oriented application context. It also clearly identifies where verified pricing, pin-level assignments, and true pin-compatible replacements are unavailable rather than presenting unsupported engineering assumptions.

RFQ پەیوەندی
MP8049SDU-LF-P - 30W Quad Class-D Driver | MPS
MP8049SDU-LF-P

MP8049SDU-LF-P - 30W Quad Class-D Driver | MPS

Monolithic Power Systems MP8049SDU-LF-P is a Class-D audio power-stage IC that provides four 30 W output channels at an 8 ohm load in a 40-QFN package measuring 5 mm by 5 mm. The device supports a 26 V maximum operating voltage and is specified for output current up to 5.5 A. It can be configured as a dual-channel full-bridge driver or a quad-channel half-bridge driver, allowing the same device to support different Class-D output topologies. A Class-D audio amplifier is a switching power amplifier in which the output transistors operate between the active and inactive states. A full-bridge arrangement provides differential drive and can produce an output without a DC-blocking output capacitor, while a half-bridge arrangement can provide a single-ended output stage. The MP8049SDU-LF-P integrates this power-driver flexibility into one surface-mount IC intended to serve as the output stage of a Class-D audio amplifier. The four-channel configuration delivers up to 30 W per channel into 8 ohms, making the device suitable for compact multi-channel audio systems. Its configurable architecture allows each full bridge to operate independently as a stereo single-ended amplifier or to operate complementarily in bridge-tied-load configuration. Short-circuit and thermal protection are listed among the device features, providing practical safeguards for demanding speaker-load and space-constrained designs. The MP8049S family combines a 26 V operating limit with a 5.5 A output-current capability. These specifications place the device in the class of integrated Class-D output stages intended for consumer audio, multimedia, and powered-speaker applications. The available source information also identifies low-current shutdown and standby modes, while the exact timing and detailed electrical limits for those modes are available in the manufacturer documentation. Typical uses include quad-channel home-audio amplification, compact stereo systems, multimedia speaker products, and portable or automotive audio subsystems where multiple amplified channels are required. The 40-QFN surface-mount package supports dense PCB layouts, but careful thermal management is essential because sustained multi-channel output can produce significant heat. Designers should also account for the low-voltage power-supply limitations of class-D audio systems. The principal design consideration is to preserve the power stage's thermal margin and switching performance. Output filtering, speaker-return routing, and high-current supply connections should be implemented as short, wide paths, while the exposed-pad thermal requirements of the 40-QFN package must be followed. The -LF-P ordering suffix identifies the supplied reel configuration, and engineers should confirm package orientation, exposed-pad layout, and pin assignments against the manufacturer datasheet before release to production. This page consolidates the verified distributor and manufacturer information for the MP8049SDU-LF-P, identifies the available same-family ordering alternatives, and adds application guidance for Class-D amplifier implementation. Because detailed pin assignments, exact switching limits, thermal data, and numeric price tiers were not included in the retrieved source material, those items are marked for verification rather than inferred.

RFQ پەیوەندی
MP8049SDU-LF-Z - 24V 5.5A Quad Class-D | MPS
MP8049SDU-LF-Z

MP8049SDU-LF-Z - 24V 5.5A Quad Class-D | MPS

Monolithic Power Systems MP8049SDU-LF-Z is a 24 V, 5.5 A quad-channel Class-D audio power driver configured as four half-bridge outputs, or two configurable full-bridge outputs, in a 40-pin QFN 5 mm × 5 mm package. The device provides selectable forced-PWM and asynchronous operating modes, programmable output-level control, dynamic output-voltage control, integrated power MOSFET switches, and an internal Schottky diode. In forced-PWM mode, the output current reaches 1.5 A, while asynchronous mode supports 50 mA. The MP8049S family can operate each full bridge independently as stereo single-ended audio amplifiers or drive the bridges complementarily in bridged-tie-load configurations. Its integration reduces external discrete switching hardware, while selectable modes let designers trade switching behavior and output characteristics according to the audio architecture. A Class-D audio power driver is the output-stage category used to convert PWM commands into high-current speaker drive. The broader hierarchy is Class-D power driver → audio power amplifier → amplifier integrated circuit → power-management and signal-chain semiconductor. The MP8049S is primarily an output-stage driver rather than a complete audio signal-chain amplifier, so its usefulness depends on upstream control, modulation, fault handling, and system-level protection. It is suitable where a compact quad-channel architecture is valuable, including multiway speakers, soundbars, compact consumer audio, industrial audio modules, and powered speaker systems. Key features include user-selectable forced-PWM and asynchronous operation, separate programmable output levels for each operating mode, dynamic output-voltage control, integrated power MOSFETs, and an integrated Schottky diode. Forced PWM provides a predictable switching mode at up to 1.5 A output current, while asynchronous operation is specified at 50 mA. Dynamic output-voltage control can reduce dissipation when the commanded output level is low, although the exact control method and external components must be implemented according to the manufacturer datasheet. The reported 24 V and 5.5 A ratings describe the family's headline operating capability and should not be interpreted as simultaneously available output power at every load or mode. The MP8049S architecture provides two configurable full bridges or four half bridges, allowing the same device family to support multiple speaker topologies. Forced-PWM mode helps control output behavior where consistent switching timing is important, whereas asynchronous operation can reduce switching activity at lower signal levels. The integrated MOSFETs eliminate separate output switching transistors in supported configurations, while the Schottky diode supports the associated rectification function. Exact pin assignments, protection limits, thermal data, operating-temperature limits, and recommended compensation or filtering networks must be confirmed in the MP8049S datasheet. Typical applications include compact stereo Class-D amplifiers, quad-channel distributed speaker systems, soundbar output stages, powered speakers, multimedia enclosures, and industrial audio modules. The 40-QFN 5 mm × 5 mm package supports space-constrained products but requires careful PCB layout for thermal dissipation, high-current output routing, ground integrity, and clean input/PWM routing. Design engineers should account for the difference between the 5.5 A device rating, the 1.5 A forced-PWM output-current specification, and the 50 mA asynchronous-mode specification when sizing speakers and protection networks. A primary design consideration is to keep high-current speaker outputs, power ground, and switching nodes compact and isolated from sensitive audio inputs. Place input and PWM-control traces away from output-current paths, use the datasheet-recommended power and ground-plane arrangement, and provide thermal copper around exposed-pad connections. Avoid treating the asynchronous-mode 50 mA rating as interchangeable with the forced-PWM rating; validate mode-specific current, thermal, and acoustic behavior in the final enclosure. This page consolidates the verified manufacturer and distributor information for the MP8049SDU-LF-Z, distinguishes device-family ratings from mode-specific limits, and adds engineering guidance on topology selection, thermal layout, current routing, and verified replacement constraints. No unverified cross-brand drop-in substitute is presented as a direct replacement.

RFQ پەیوەندی
MP8101DJ-LF-P - 1.8V 400kHz Ultra-Low-Power Op Amp | MPS
MP8101DJ-LF-P

MP8101DJ-LF-P - 1.8V 400kHz Ultra-Low-Power Op Amp | MPS

The Monolithic Power Systems MP8101DJ-LF-P is a single-circuit, rail-to-rail-output operational amplifier with 400 kHz gain-bandwidth product, 11 µA supply current, and operation from a single 1.8 V supply in a TSOT-23-5 package. It is designed for low-voltage, low-power signal conditioning where a small package, low quiescent current, and rail-to-rail output are more important than high bandwidth or precision over a wide temperature range. The MP8101 family is positioned between general-purpose amplifiers and larger, higher-current analog signal-chain devices. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs while using feedback to control gain, bandwidth, and signal integrity. The MP8101 is a rail-to-rail-output amplifier, meaning its output can approach the supply rails more closely than a conventional output stage. It belongs to the operational-amplifier, analog-amplifier, and power-management-adjacent low-power IC categories, making it useful in portable sensors, battery-powered instruments, and low-voltage embedded systems. The main verified specifications are 400 kHz bandwidth, 11 µA supply current, and operation down to 1.8 V. The manufacturer describes the device as an ultra-low-power operational amplifier in a TSOT-23 package. The TSOT-23-5 outline supports compact surface-mount layouts, while the five-pin arrangement is intended for straightforward single-amplifier implementations. Rail-to-rail output supports low-voltage systems in which the signal can occupy much of the available supply range. The MP8101 can be used for sensor amplification, buffer stages, low-voltage ADC drivers, current-shunt monitoring, and portable measurement systems. Its 11 µA supply current is useful in battery-operated equipment where the amplifier must remain present without dominating the standby power budget. The 400 kHz bandwidth permits moderate-speed signal processing, although the datasheet should be consulted for gain-bandwidth, slew-rate, input-common-mode, output-swing, and noise details before finalizing a design. Designers should verify the exact input and output voltage limits, input bias current, output-current capability, noise density, slew rate, and stability requirements against the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and the unused input should be configured according to the datasheet recommendations. This page consolidates the verified manufacturer and distributor information, technical use cases, sourcing guidance, and drop-in replacement information for faster engineering review.

RFQ پەیوەندی
MP8101DJ-LF-Z - 400kHz Low-Power RRO Op Amp | MPS
MP8101DJ-LF-Z

MP8101DJ-LF-Z - 400kHz Low-Power RRO Op Amp | MPS

Monolithic Power Systems MP8101DJ-LF-Z is a single-circuit, rail-to-rail-output operational amplifier with 400 kHz gain-bandwidth product, 11 µA supply current, and operation from a single supply as low as 1.8 V. The device is supplied in a compact TSOT-23-5 surface-mount package and is intended for general-purpose low-voltage signal amplification. An operational amplifier is an analog signal-conditioning IC that amplifies the difference between its inverting and non-inverting inputs. Within the broader semiconductor hierarchy, the MP8101 belongs to the operational-amplifier family of amplifier ICs and supports low-voltage, low-power system designs. Its rail-to-rail output allows the output voltage to approach the supply rails under suitable load and output conditions, while the 400 kHz bandwidth makes it suitable for moderate-speed signal paths rather than high-frequency precision applications. The principal benefits of the MP8101DJ-LF-Z are its 11 µA supply-current consumption, 400 kHz gain-bandwidth product, single-supply operation down to 1.8 V, and 82 dB common-mode rejection ratio. The 0.2 V/µs slew rate supports moderate signal transitions, and the TSOT-23-5 package minimizes board area. These characteristics suit battery-powered sensing, portable instrumentation, low-voltage control, and general analog conditioning where energy efficiency and compactness matter. Technically, the MP8101 is a general-purpose amplifier rather than a dedicated micropower part selected solely for the lowest possible quiescent current. Its 400 kHz bandwidth provides useful closed-loop response for low-frequency and moderate-bandwidth signals. Common-mode rejection of 82 dB helps reduce differential outputs caused by unwanted common-mode voltage, but input offset, input-bias current, output-current capability, noise, stability, and maximum supply voltage must be checked in the complete application before treating it as a universal substitute. Typical uses include buffering sensor outputs, amplifying low-level analog signals, conditioning controls, driving moderate loads, and providing gain in compact battery-operated equipment. The rail-to-rail output is particularly useful when the signal must use most of the available supply range. Designers should nevertheless verify the output swing, capacitive-load behavior, input common-mode range, and shutdown behavior against the manufacturer datasheet before finalizing a design. The primary design consideration is the tradeoff between bandwidth, supply voltage, and current consumption. The 11 µA operating current supports low-power operation, but 400 kHz bandwidth does not make the amplifier appropriate for high-speed communication links or video. Input and output stability should be evaluated with the actual source impedance, load, cable capacitance, and supply-decoupling network rather than under ideal laboratory conditions. This product page consolidates the verified manufacturer and distributor information, identifies sourcing and technical-document links, and separates confirmed MP8101DJ-LF-Z characteristics from unavailable pricing and detailed pin information. It also provides application guidance and an honest drop-in comparison instead of presenting unsupported substitutions as verified equivalents.

RFQ پەیوەندی
MP8102DJ-LF-P - 600kHz 1.8V Low-Power Op Amp | MPS
MP8102DJ-LF-P

MP8102DJ-LF-P - 600kHz 1.8V Low-Power Op Amp | MPS

Monolithic Power Systems MP8102DJ-LF-P is a single low-power operational amplifier featuring 600 kHz gain-bandwidth product, 7.5 µA supply current, and operation from a single supply as low as 1.8 V. The device is offered in a 5-pin TSOT-23 package and uses a rail-to-rail output architecture. These headline characteristics place it within the operational-amplifier, analog-amplifier, and signal-conditioning IC hierarchy. An operational amplifier, or op amp, is a high-gain differential amplifier used to amplify, buffer, filter, or compare small voltage signals. The MP8102 family emphasizes low supply current and low-voltage operation rather than the high bandwidth and drive current associated with general-purpose amplifiers. Its rail-to-rail output allows the output voltage to approach the supply limits under suitable load and output conditions, making it useful in compact, low-power sensor and portable systems. The verified manufacturer description identifies 600 kHz bandwidth, 7.5 µA supply current, and single-supply operation down to 1.8 V. Additional distributor data identifies a 5-pin TSOT-23 package, 82 dB CMRR, and a -40 °C to +85 °C operating-temperature range. The combination of low quiescent consumption and a 600 kHz gain-bandwidth product supports signal paths that require measurable bandwidth without a high-current amplifier architecture. The MP8102 is a single-amplifier device intended for low-voltage analog signal conditioning. A 1.8 V minimum supply supports energy-limited systems, while the 600 kHz bandwidth is suitable for modest-frequency filtering, buffering, and gain stages. Because the verified excerpts do not provide complete electrical-limit tables, exact input-offset voltage, input-bias current, open-loop gain, noise density, and output-drive specifications should be confirmed in the manufacturer datasheet before production release. Typical uses include low-power sensor interfaces, portable instrumentation, battery-powered monitoring, current-loop signal conditioning, and small embedded analog front ends. The 7.5 µA supply current is especially relevant when aggregate amplifier consumption dominates a compact design's available power budget. The 600 kHz bandwidth allows the amplifier to process signals beyond DC without behaving as a purely static precision amplifier. Designers should verify input common-mode range, output swing, capacitive-load stability, noise, and gain-bandwidth behavior directly from the MP8102 datasheet. Decoupling-capacitor values, stability with sensors, and achievable output accuracy are not specified in the supplied excerpts and should not be inferred. PCB layout should keep the input path short and provide a local return path for the supply and ground pins. This product page consolidates the verified manufacturer description, distributor classification, package information, sourcing links, and engineering limitations for MP8102DJ-LF-P. It also distinguishes verified facts from parameters that still require datasheet confirmation, helping engineers evaluate the part without mistaking distributor classifications for complete electrical specifications.

RFQ پەیوەندی
MP8102DJ-LF-Z - 600kHz Low-Power RRIO Op Amp | MPS
MP8102DJ-LF-Z

MP8102DJ-LF-Z - 600kHz Low-Power RRIO Op Amp | MPS

The Monolithic Power Systems MP8102DJ-LF-Z is a general-purpose, rail-to-rail-output operational amplifier with 600kHz gain-bandwidth product, 7.5µA supply current, and operation from a single supply as low as 1.8V. The device is supplied in a 5-pin TSOT-23 package, making it suitable for compact, low-power analog signal-conditioning systems. An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. A rail-to-rail-output amplifier can approach the supply rails at its output, which helps maximize usable output voltage in low-voltage systems. Within the broader hierarchy, the MP8102 is an operational amplifier, analog amplifier IC, signal-conditioning IC, and power-management-support semiconductor designed around low-voltage, low-power signal processing. The MP8102 combines a 600kHz gain-bandwidth product with supply current of 7.5µA. It supports a 5V supply according to the retrieved specification data and can operate from a single supply as low as 1.8V. Additional reported characteristics include 82dB common-mode rejection, 0.1V/µs slew rate, and a maximum input offset voltage of 5mV. Its rail-to-rail output architecture improves output headroom when the amplifier operates close to the available supply voltage. The 600kHz bandwidth makes the MP8102 suitable for modest-frequency signal amplification rather than high-speed video or RF tasks. Its 7.5µA supply current reduces power consumption in continuously powered instrumentation, while the small TSOT-23 package supports space-constrained boards. The 0.1V/µs slew rate defines how quickly the output can move under suitable loading and should be checked against large-signal and capacitive-load requirements. Typical uses include low-voltage sensor conditioning, battery-powered measurement nodes, audio and communication interface buffers, microcontroller analog front ends, and general-purpose signal amplification. Its rail-to-rail output behavior is particularly useful when the processed signal must occupy much of the available 1.8V-to-5V supply range. The TSOT-23 package also requires careful PCB layout and adequate thermal spreading for reliable operation. When designing around the MP8102, verify the exact input common-mode range, output swing, output-current capability, noise, and stability with capacitive loads against the manufacturer datasheet. Place the device close to the feedback network and bypass its supply pins with a short, low-inductance connection to minimize instability, ground offset, and susceptibility to switching-node noise. This product record consolidates the verified manufacturer and distributor data with practical design guidance, application analysis, lifecycle-relevant sourcing information, and an explicit separation between documented characteristics and parameters that still require datasheet confirmation.

RFQ پەیوەندی
MP8103DK-LF - Dual 200kHz Rail-to-Rail Op Amp | MPS
MP8103DK-LF

MP8103DK-LF - Dual 200kHz Rail-to-Rail Op Amp | MPS

The Monolithic Power Systems MP8103DK-LF is a dual, rail-to-rail-output operational amplifier rated for a 5 V supply, with a 200 kHz gain-bandwidth product, 82 dB CMRR, 0.1000 V/µs slew rate, and an 8-MSOP package. The two amplifiers are intended for low-voltage signal conditioning where compactness, low power, and rail-to-rail output operation are useful. Verified distributor descriptions identify this device as a standard general-purpose, dual amplifier, while the supplied datasheet snippets confirm its 5 V supply condition, 82 dB CMRR, 0.1000 V/µs slew rate, −40 °C to +85 °C operating range, MSOP-8 package, and RoHS-compliant status. An operational amplifier is an analog integrated circuit that compares two input voltages and drives its output toward a higher level when the noninverting input exceeds the inverting input. Within the amplifier hierarchy, the MP8103 is an operational amplifier IC, also called an op amp, within analog and amplifier semiconductors. A dual device contains two amplifier channels, allowing one package to serve two related signal paths. Rail-to-rail output means the output can approach the supply rails under suitable load and output conditions, making the device relevant to low-voltage systems whose usable signal range extends close to the rails. The verified data highlights a 200 kHz gain-bandwidth product, 82 dB common-mode rejection ratio, and 0.1000 V/µs slew rate. These figures describe the amplifier’s speed and immunity to signals common to both inputs. The 200 kHz bandwidth is relevant for signal paths that do not require high-frequency operation, while the 82 dB CMRR indicates rejection of common-mode interference. The 8-MSOP format supports compact PCB layouts, and the dual-channel configuration can reduce the number of packages compared with using separate single amplifiers. The MP8103 family is described as a single-supply, rail-to-rail-output operational amplifier. The verified search data also reports operation from a supply as low as 1.8 V for the MP8103 family and approximately 14 µA supply current in one related family description. For the exact MP8103DK-LF, use the manufacturer datasheet for full electrical limits, input range, output behavior, stability, and recommended operating conditions. The −40 °C to +85 °C operating-temperature specification is available for this exact part in the supplied search data. Typical applications include low-voltage sensor interfaces, buffered analog measurements, audio or communications signal conditioning, and general embedded analog systems where two amplifier channels are useful. Because the available verified data does not provide a genuine manufacturer PDF URL, application-specific limits, or complete pricing values, those fields are marked as needed rather than estimated. Engineers should confirm the exact pinout, supply limits, input common-mode range, output swing, noise, and stability requirements against the official MP8103 datasheet before production release.

RFQ پەیوەندی
MP8103DK-LF-P Dual 200 kHz Low-Power Op Amp | MPS
MP8103DK-LF-P

MP8103DK-LF-P Dual 200 kHz Low-Power Op Amp | MPS

Monolithic Power Systems MP8103DK-LF-P is a dual, general-purpose operational amplifier with a 200 kHz gain-bandwidth product, 5.5 V maximum supply capability, 14 µA supply current, and an 8-MSOP package. The device uses rail-to-rail output stages and can operate from a single supply as low as 1.8 V. These characteristics position it within the operational amplifier hierarchy as a low-voltage, low-power amplifier suitable for portable and embedded signal-conditioning systems. An operational amplifier, or op amp, is a high-gain differential amplifier used to compare and amplify small voltage signals. The MP8103 is a dual amplifier, so one package contains two independent amplifier channels. It belongs to the general-purpose amplifier class within integrated circuits and is intended for functions such as voltage buffering, sensor conditioning, current-voltage conversion, and gain-stage implementation when low supply current is more important than high bandwidth. The verified distributor information identifies the MP8103 as a 200 kHz gain-bandwidth device, while another indexed datasheet description identifies 600 kHz bandwidth for the MP8103 family. It is a rail-to-rail-output amplifier with a maximum indicated supply voltage of 5.5 V and an exceptionally low 14 µA supply current. Operation from 1.8 V permits use in systems where the available energy budget limits continuous amplifier consumption. The MP8103’s dual-channel configuration saves board area compared with two separate single amplifiers, while its MSOP package supports compact layouts. Rail-to-rail output behavior can simplify designs that require the output to approach the available supply range. Engineers should nevertheless verify output swing, input common-mode range, offset voltage, noise, stability, and load-driving capability against the manufacturer datasheet before committing a high-impedance or precision application. Typical uses include low-power sensor interfaces, portable instrumentation, battery-powered condition-monitoring circuits, and low-frequency analog signal chains. The 14 µA supply current is particularly useful when the amplifier must remain continuously powered, while 200 kHz bandwidth provides adequate response for many sensor and control signals rather than high-speed waveform applications. The primary design consideration is supply headroom. Because the device can operate from 1.8 V, the selected output must remain within the verified output-swing limits at the intended load. Input bias currents should also be compared with source impedances to prevent avoidable DC errors, and each power rail should be decoupled close to the device pins. This page consolidates verified distributor specifications, sourcing information, package details, application guidance, and engineering caveats. It distinguishes confirmed MP8103DK-LF-P attributes from parameters that remain unavailable in the supplied web data, supporting more accurate design-in and procurement decisions.

RFQ پەیوەندی
MP8103DK-LF-Z - Dual 600kHz Low-Power Op Amp | MPS
MP8103DK-LF-Z

MP8103DK-LF-Z - Dual 600kHz Low-Power Op Amp | MPS

Monolithic Power Systems MP8103DK-LF-Z is a dual, single-supply, rail-to-rail-output operational amplifier designed for low-voltage, low-power signal-conditioning systems. The verified distributor data identifies a 600 kHz gain-bandwidth product, operation from a supply as low as 1.8 V, and approximately 14 microamps of supply current. The device is supplied in an 8-MSOP package, making it suitable for compact portable, sensor, and instrumentation designs where two amplifier channels are required in one package. An operational amplifier is an analog integrated circuit that uses high-gain differential feedback to amplify or buffer an input signal. The MP8103 belongs to the operational-amplifier family within the broader linear-amplifier and signal-conditioning hierarchy. Its dual-channel configuration reduces board area by combining two amplifiers in one package, while its low-power operation is useful when the available supply current is limited. The main differentiators are the 600 kHz gain-bandwidth product, low 1.8 V minimum supply voltage, approximately 14 microamp supply current, and rail-to-rail output capability. These characteristics support portable sensor interfaces, battery-powered measurement systems, low-voltage analog signal chains, and general-purpose amplification where low power consumption and compactness are more important than high bandwidth. The MP8103 is identified by distributor listings as a dual rail-to-rail 8-MSOP amplifier. The available verified material describes the MP8103 family as a single-supply, dual rail-to-rail-output operational amplifier. Because the supplied web data does not include the full manufacturer datasheet parameter table, detailed specifications such as input common-mode range, output swing, slew rate, noise density, offset voltage, and temperature range are marked as requiring verification before final design release. Typical implementations include two-channel sensor conditioning, low-voltage battery monitoring, portable medical or industrial measurement modules, and embedded analog interfaces. The 1.8 V operating capability is especially valuable in systems powered from a single lithium-cell or low-voltage regulated rail, while the dual channel count reduces component count compared with two separate single amplifiers. For layout, keep input and feedback paths short, place the device close to the bypass capacitor, and route high-impedance input nodes away from switching and digital return currents. Confirm the actual input common-mode and output swing ranges from the manufacturer datasheet before using the amplifier near the supply rails. This page consolidates the verified distributor identity, package information, low-power characteristics, sourcing links, and engineering selection guidance for MP8103DK-LF-Z.

RFQ پەیوەندی
MP8104DJ-LF-P - 1.8V 400kHz Rail-to-Rail Op Amp | MPS
MP8104DJ-LF-P

MP8104DJ-LF-P - 1.8V 400kHz Rail-to-Rail Op Amp | MPS

Monolithic Power Systems MP8104DJ-LF-P is a general-purpose, single-circuit operational amplifier designed for low-voltage, low-power signal conditioning. The device operates from a single supply as low as 1.8 V, provides a 400 kHz gain-bandwidth product, consumes approximately 11 µA of supply current, and uses a rail-to-rail output stage. It is packaged in the compact TSOT-23-5 surface-mount package with an industry-standard pin arrangement. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. Operational amplifiers belong to the broader signal-conditioning IC hierarchy, alongside instrumentation amplifiers, comparators, buffers, and specialized analog front-end devices. The MP8104DJ-LF-P is intended for applications that require compactness, low supply voltage, low power consumption, and a general-purpose single amplifier. The most important verified specifications are the 1.8 V minimum single-supply operation, 400 kHz bandwidth, and 11 µA supply current. Its rail-to-rail output allows the output voltage to approach the supply rails more closely than a conventional non-rail-to-rail output stage, which can be useful in compact sensor, filtering, and signal-level conditioning circuits. The TSOT-23-5 package helps minimize board area, although its small footprint requires careful layout and thermal analysis. The MP8104 is listed as an ultra-low-power operational amplifier with an industry-standard pin-out. The verified distributor information identifies it as a standard general-purpose amplifier in a one-circuit TSOT-23-5 package. Mouser also marks MP8104DJ-LF-P as NRFND and recommends MP8102 for new designs, so designers should verify lifecycle requirements before committing a new production PCB to this part. The manufacturer product page is the appropriate starting point for the latest datasheet and lifecycle information. Typical uses include low-voltage sensor interfaces, battery-powered measurement circuits, analog filtering, general signal conditioning, portable instrumentation, and low-power embedded systems. The 400 kHz bandwidth is suitable for modest-speed applications rather than high-frequency precision signal chains. When selecting a replacement, verify the input common-mode range, output swing, offset voltage, noise, slew rate, and stability requirements in addition to the package and supply voltage. A critical design consideration is avoiding overdriving the input or output stages. Keep the output within the amplifier's specified operating limits, account for capacitive loading at the output, and use short, low-impedance signal paths. For single-supply operation, provide adequate input and output decoupling close to the device and confirm that the selected feedback network is stable with the intended noise gain. This product page combines the verified manufacturer and distributor information with practical design guidance, lifecycle caveats, pricing fields, and package-level replacement considerations that are not fully available from a distributor listing alone. It is intended to help engineers and purchasing teams verify fit, availability, and redesign risk.

RFQ پەیوەندی
MP8104DJ-LF-Z - 1.8V, 400kHz Rail-to-Rail Op Amp
MP8104DJ-LF-Z

MP8104DJ-LF-Z - 1.8V, 400kHz Rail-to-Rail Op Amp

The Monolithic Power Systems MP8104DJ-LF-Z is an ultra-low-power, rail-to-rail-output operational amplifier with a 1.8 V to 5.5 V supply range, 400 kHz gain-bandwidth product, and 2 pA input-bias current. The device is supplied in a surface-mount TSOT-23-5 package and uses an industry-standard five-pin operational-amplifier pinout. The MP8104 is positioned for portable, low-voltage signal-processing systems where low operating current, small package size, and rail-to-rail output capability are important. An operational amplifier is a high-gain analog signal-conditioning IC used in the broader amplifier IC and analog IC hierarchy. Its common uses include voltage buffering, current-to-voltage conversion, differential sensing, active filtering, and feedback-controlled gain stages. The MP8104's 1.8 V minimum supply voltage allows operation directly from a single low-voltage cell or a low-dropout-regulated rail, while its rail-to-rail output enables useful signal swing toward the upper supply rail in low-voltage systems. The verified device information identifies a 400 kHz gain-bandwidth product and 2 pA input-bias current. The 400 kHz bandwidth provides a practical operating range for slow sensor signals, low-frequency instrumentation, and feedback loops that do not require high-speed signal handling. The 2 pA bias-current figure is particularly useful for high-impedance sensing, where input leakage can create gain errors. A listed 82 dB metric is also associated with the device, although the supplied source snippets do not fully define the measurement conditions. The TSOT-23-5 package minimizes PCB area and is compatible with high-density analog and mixed-signal layouts. Because the package has limited thermal mass, sustained output current and power dissipation require careful load and layout review. The exact input-offset voltage, output-current capability, quiescent current, noise spectrum, common-mode range, and operating-temperature limits were not supplied in the verified data and must be confirmed in the manufacturer datasheet before production design. Typical uses include battery-powered sensor interfaces, portable biomedical signal conditioning, low-current industrial monitoring, audio and control-signal amplification, and small-footprint analog filter stages. The low 1.8 V supply threshold and small package make the device especially suitable for space-constrained equipment powered from a single cell or a low-energy Bluetooth, IoT, or wearable sensor node. When designing around the MP8104, place input, output, and decoupling connections using the shortest practical signal paths and provide local supply bypassing according to the manufacturer layout guidance. Confirm output-swing limits under the actual load, verify that the selected feedback network works across the intended 1.8 V to 5.5 V range, and account for input-bias-current error when the source impedance is high. This product record consolidates the verified manufacturer and distributor facts for the MP8104DJ-LF-Z with package guidance, sourcing limitations, and application-oriented engineering considerations. It also explicitly separates published values from parameters that still require confirmation from the complete manufacturer datasheet.

RFQ پەیوەندی
MP8110DK-LF - 40V High-Side Current-Sense Amplifier | MPS
MP8110DK-LF

MP8110DK-LF - 40V High-Side Current-Sense Amplifier | MPS

Monolithic Power Systems MP8110DK-LF is a low-cost, precision, high-side current-sense amplifier designed for current monitoring from a single 2.5V to 40V supply. The device provides a single amplifier channel in an 8-MSOP package and is intended for notebook computers, cell phones, battery-powered systems, and other applications where DC load-current measurement is required. Its high-side placement avoids interrupting the monitored power path and allows the sensed current to be measured relative to ground. A current-sense amplifier is an analog signal-conditioning device that measures the voltage drop across a small sense resistor and produces an output proportional to the current flowing through that resistor. The MP8110 family belongs to the precision analog and current-measurement hierarchy, supporting high-side current sensing, power-system monitoring, battery management, load detection, and overcurrent protection. Its low supply current helps preserve battery life in portable systems. The manufacturer describes the MP8110 as operating from 2.5V to 40V and typically consuming 12 µA. The device output is proportional to load current, and the MP8110 evaluation-board information states that 1V output corresponds to 5A of load current. This relationship depends on the selected sense resistor and device gain; the exact gain, common-mode range, accuracy, and electrical limits should be confirmed in the manufacturer datasheet before final design release. High-side current sensing places the sense resistor in the positive supply conductor, so the amplifier can monitor current without disconnecting the load or placing a high-side transistor in the power path. This is useful in battery-powered equipment where the ground connection must remain common with the monitored system. The approach can also simplify power-path protection because the load remains connected during measurement. The MP8110 is suitable for notebook computers, cell phones, battery-operated instruments, industrial control systems, power adapters, and other DC rails where current monitoring is valuable. In these applications, the amplifier output can be connected to an analog-to-digital converter, comparator, microcontroller input, or system controller for current reporting, load detection, and protection. The 40V supply capability is useful for systems whose monitored rail is above conventional low-voltage logic levels. Designers should verify the sense-resistor value, Kelvin routing, amplifier gain, output swing, supply decoupling, and input common-mode limits against the specific MP8110 ordering code and datasheet. Keep the sense-resistor connections short and symmetrical to reduce parasitic resistance and measurement error. Place the amplifier and filtering components close to the sense resistor, and provide stable supply bypassing where required by the application. This page summarizes the verified manufacturer and distributor information for MP8110DK-LF and distinguishes confirmed specifications from parameters that require datasheet confirmation. It also provides application guidance and procurement context for engineers comparing high-side current-sense amplifier options.

RFQ پەیوەندی
MP8110DK-LF-P - 40V High-Side Current Sense Amplifier | MPS
MP8110DK-LF-P

MP8110DK-LF-P - 40V High-Side Current Sense Amplifier | MPS

Monolithic Power Systems MP8110DK-LF-P is a precision high-side current-sense amplifier with one channel, a 2.5 V to 40 V operating supply range, and an 8-MSOP package. The device typically consumes 12 µA, while its output provides 1 V for a 5 A load-current condition according to the manufacturer evaluation-board description. These characteristics position it for low-cost battery and DC current monitoring where the measured conductor lies above the system ground potential. A high-side current-sense amplifier is an instrumentation amplifier that measures the small voltage developed across a sense resistor placed in the positive supply path. In the component hierarchy, it belongs to the current-sense amplifier family, instrumentation amplifier category, analog signal-conditioning ICs, and broader power-monitoring and power-management ecosystem. Unlike a low-side arrangement, high-side sensing keeps the load-current path at ground potential and supports direct monitoring of battery or system input current. Key features include a wide 2.5 V to 40 V single-supply operating range, typical supply consumption of 12 µA, one amplifier channel, and a low-cost 8-MSOP implementation. The manufacturer identifies notebook computers, cell phones, and battery-powered systems as representative applications. An evaluation board is also available as the EV8110DS-00A, providing a practical platform for evaluating the device's output response and current-to-voltage relationship. The MP8110 family uses a high-side sensing arrangement so that the input-side common-mode voltage can rise with the monitored bus while the measured differential signal remains small. Its 1 V output for a 5 A load condition provides a useful reference for the accompanying evaluation board. Designers should nevertheless verify the complete gain, output range, common-mode limits, offset, accuracy, and stability specifications against the current manufacturer datasheet before finalizing a production design. Typical uses include battery charge monitoring, DC input-current measurement, load-current reporting, and system power-management feedback. The low 12 µA typical consumption is particularly relevant to portable equipment where every microampere contributes to standby demand. The device can also support power-path monitoring when the conductor being measured must remain at a high common-mode voltage relative to the system ground. The primary design consideration is the sense-resistor and feedback-network implementation. Place the sense resistor where it can be measured cleanly, route the differential inputs as a short matched pair, and confirm that the expected output voltage remains inside the amplifier's operating range. Component values, resistor tolerance, trace resistance, and the amplifier's own accuracy will determine the final current-measurement error. This page consolidates verified manufacturer specifications, distributor availability, a same-family drop-in alternative, application guidance, and practical selection considerations. It also distinguishes supplied facts from parameters that require confirmation in the manufacturer datasheet, supporting faster engineering evaluation without presenting unverified electrical values as established specifications.

RFQ پەیوەندی
MP8110DK-LF-Z - 40V High-Side Current Sense Amp | MPS
MP8110DK-LF-Z

MP8110DK-LF-Z - 40V High-Side Current Sense Amp | MPS

Monolithic Power Systems Inc. MP8110DK-LF-Z is a single-circuit, precision high-side current-sense amplifier with a 2.5 V to 40 V input-voltage range and a 1 V output corresponding to 5 A of load current, housed in an 8-pin MSOP package. The device is intended to monitor current in a high-side supply rail while producing an analog voltage proportional to the measured load current. A high-side current-sense amplifier is an instrumentation amplifier that measures the small voltage drop across a sense resistor placed in series with a power path. The MP8110 belongs to the current-sense amplifier category, which is part of the broader analog and mixed-signal IC hierarchy. Its high-side placement keeps the monitored load near ground potential, making it useful in systems where the current-carrying conductor is difficult to bring to a low-voltage analog input. The verified manufacturer information identifies a 2.5 V to 40 V operating input range, a typical 17 µA supply consumption, one amplifier circuit, and a nominal transfer relationship in which 1 V of output represents 5 A of load current. This 0.2 V/A relationship provides a direct way to interpret the output voltage during current measurements. The 40 V capability supports measurement of high-voltage rails without requiring the amplifier to be placed directly across the full supply voltage. The MP8110DK-LF-Z is described by the manufacturer as a low-cost, precision, high-side current-sense amplifier. Its proportional analog output can be connected to an ADC, comparator, controller, or monitoring circuit so that the host system can measure load current or react when a programmed threshold is exceeded. The manufacturer also documents the EV8110DS-00A evaluation board for evaluating the MP8110 in a complete application circuit. Typical uses include power-supply load monitoring, battery-powered systems, industrial controllers, motor-control circuits, and general 40 V power rails. Because the output scales at 0.2 V per ampere, a 5 A load produces a 1 V output according to the manufacturer product-page information. Designers should verify the required sense-resistor value, output range, error limits, and operating conditions against the complete manufacturer datasheet before production use. A primary design consideration is Kelvin routing of the sense-resistor connections. The amplifier must detect the voltage drop across the sense resistor without picking up voltage drops in its own supply and ground traces. Short, symmetric connections, suitable resistor placement, and a clean return path help preserve measurement accuracy. The analog output should also remain within the input range of the receiving ADC or controller. This page consolidates the verified manufacturer and distributor information for MP8110DK-LF-Z, including the known electrical characteristics, package information, sourcing links, and practical application guidance. It also separates documented values from parameters that still require confirmation from the full datasheet, helping engineers make faster and more defensible component-selection decisions.

RFQ پەیوەندی
MP8110DS-LF-Z - 40V High-Side Current Sense Amp | MPS
MP8110DS-LF-Z

MP8110DS-LF-Z - 40V High-Side Current Sense Amp | MPS

Monolithic Power Systems MP8110DS-LF-Z is a precision, high-side current-sense amplifier operating from a single 2.5 V to 40 V supply, with a 1.4 V to 40 V common-mode input range and typical supply consumption of 12 µA. The device is packaged in an 8-pin SOIC. It is designed to measure current in a high-side supply rail without disrupting the load path, making it useful in notebook computers, cellular phones, battery systems, and other DC power-monitoring equipment. A high-side current-sense amplifier is an instrumentation amplifier that senses the small voltage developed across a low-ohm sense resistor in a current-carrying conductor. The MP8110 converts this differential sense voltage into a proportional output voltage. This category belongs to the amplifier hierarchy: current-sense amplifier → instrumentation amplifier → analog amplifier → integrated circuit. High-side placement is especially valuable in battery-powered equipment because the monitored load ground can remain connected directly to the system ground. Key verified characteristics include a 2.5 V to 40 V operating supply, 1.4 V to 40 V common-mode voltage range, 400 µV input offset voltage, 4 nA input bias current, 5 mA output current capability, 97 dB common-mode rejection, and an enable or shutdown function. The 12 µA typical supply current supports low-power monitoring designs. These parameters make the amplifier suitable for power paths where the measured current can range from light-load conditions to substantially higher operating levels. The MP8110 uses a precision differential-sensing architecture to reject supply ripple and common-mode disturbances present on the high-side conductor. Its common-mode rejection of 97 dB helps preserve measurement accuracy when the monitored rail changes substantially. The wide 40 V operating and common-mode limits accommodate automotive, industrial, communications, and portable equipment rails, although the selected sense resistor and amplifier gain must still be chosen to keep the output within the usable analog range. Typical uses include battery charge monitoring in notebook computers and cellular phones, DC/DC converter load measurement, power-path current limiting, general high-side load detection, and energy-management subsystems. The enable or shutdown function can be used to reduce consumption when continuous monitoring is unnecessary. Because the part senses above the load connection, it avoids inserting an additional ground-path element between the source and the monitored system. The primary design consideration is selecting the sense-resistor value and amplifier gain together. Too little sense resistance produces an output signal buried in noise, while too much resistance can reduce available supply voltage and increase power loss as I²R. Layout should keep the differential traces short, matched, and away from switching nodes. Input filtering and the manufacturer’s recommended resistor and capacitor values should be used to balance response time against transient rejection. This product page consolidates verified manufacturer and distributor information, current-sense design considerations, practical application guidance, and verified drop-in sourcing data. It is intended to help engineers compare the MP8110DS-LF-Z with an exact same-package replacement without inferring unverified electrical differences.

RFQ پەیوەندی
MP8130DJ-LF-Z - 36V 200kHz Low-Power Op Amp | MPS
MP8130DJ-LF-Z

MP8130DJ-LF-Z - 36V 200kHz Low-Power Op Amp | MPS

The Monolithic Power Systems MP8130DJ-LF-Z is an ultra-low-power, high-voltage operational amplifier with rail-to-rail output, 200 kHz bandwidth, and a 10 uA typical supply current. It operates from a single 2.7 V to 36 V supply and is packaged in a compact TSOT-23-5 surface-mount package. The MP8130 family is designed for applications that require higher supply-voltage tolerance and low operating power, including industrial instrumentation, sensor interfaces, battery-powered systems, and low-frequency signal-conditioning circuits. An operational amplifier, or op amp, is a high-gain analog amplifier intended for feedback-based applications. The MP8130 is a general-purpose precision analog device whose rail-to-rail output allows the output voltage to approach the supply rails under suitable load and output conditions. Its single-supply operating range of 2.7 V to 36 V places it within the voltage-regulator and power-management IC ecosystem as a signal-conditioning component rather than a power-conversion device. Key characteristics include a 200 kHz gain-bandwidth product, approximately 10 uA supply current, 82 dB CMRR, and a 0.1 V/us slew rate. The combination of high-voltage tolerance and low quiescent current makes the device useful where a conventional low-voltage amplifier would not tolerate the available supply voltage. The TSOT-23-5 package supports space-constrained PCB layouts while retaining five-pin operational-amplifier connectivity. The MP8130 is optimized for low-frequency closed-loop operation rather than high-speed signal processing. Its bandwidth limits how quickly the output can respond to small-signal inputs, while the 0.1 V/us slew rate limits large-signal transitions. Feedback-network values, load capacitance, input common-mode range, and supply bypassing should therefore be checked against the manufacturer datasheet before deployment in precision or high-speed designs. Typical applications include low-power sensor conditioning, industrial control and monitoring, portable instrumentation, battery-operated measurement systems, and analog signal buffering. The 36 V maximum supply rating can simplify designs that operate from industrial rails, although the actual operating range must remain within the specified 2.7 V to 36 V limits and the total supply voltage must not exceed the device rating. For PCB implementation, place input and output bypass capacitors close to the amplifier pins and use low-ESL, low-ESR surface-mount ceramic capacitors. Keep feedback traces short and separate high-current return paths from sensitive input nodes. The manufacturer datasheet should be consulted for the complete electrical-characteristics table, input and output limits, and package drawings. This product record consolidates manufacturer specifications, distributor availability information, package details, application guidance, and verified drop-in replacement findings for engineers evaluating the MP8130DJ-LF-Z.

RFQ پەیوەندی