Audio Codecs
بەرهەمەکان (190+)
PCM3794RHB - Low-Power Stereo Audio Codec w/ HP Amp | Texas Instruments
The Texas Instruments PCM3794RHB is a very low-power stereo audio codec with an integrated headphone amplifier, notch filters, automatic level control (ALC) and 3D effects, packaged in a 32-pin VQFN (RHB) 5 x 5 mm surface-mount package. The device combines analog-to-digital and digital-to-analog conversion in one IC and is classified by the manufacturer under Interface ICs > CODECs, with distributor catalogues listing it in the Interface - Telecom family. An audio codec is a mixed-signal integrated circuit that converts analog audio signals into a digital bitstream for transmission or storage and converts digital audio data back into analog voltage for playback. The codec hierarchy runs from audio codec, to sound converter, to interface IC, to integrated circuit, and finally to semiconductor. Placing the converter, digital filters, and headphone output stage in a single package shortens the analog path, reduces board area, and lowers system cost in handsets, portable audio, and networked voice terminals. The PCM3794 differentiates itself mainly through its analog output stage. Instead of driving headphones through an external discrete amplifier, the device provides an on-chip headphone amplifier, which removes the need for a separate output buffer and the associated EMI filtering. The integrated notch filters remove DC and low-frequency hum before the signal reaches the headphone driver, while the ALC function automatically adjusts gain during level changes so recordings stay consistent without manual gain rides. The 3D effect stage adds a simple spatial widening to the stereo image for playback enhancement. The PCM3794 communicates with a host processor over a serial audio bus, and distributor records describe the part as a 16-bit serial stereo audio interface. Because the conversion, filtering and headphone functions sit behind one serial interface, the host only needs an audio port, a few control registers, and a compact passives network around the analog pins. The 32-pin VQFN footprint keeps the layout small enough for handset and dongle form factors where board area is tightly constrained. Typical deployments include voice-over-IP terminals, USB and Bluetooth audio dongles, portable media players, smart speaker front ends, VoIP handsets and industrial call-box modules. In each case the codec reduces the number of external active components and keeps the analog output path short, which helps limit board noise coupling into the microphone and headphone loops. When laying out a design around the PCM3794RHB, keep the analog supply decoupling close to the device, place input and output capacitors on the shortest possible traces, and route the digital interface signals away from the microphone and headphone nets. Confirm the exposed-pad connection and thermal requirements against the manufacturer datasheet before committing to a high-temperature operation in a sealed enclosure.
SI3000-C-FS - 16-Bit Voice Codec | Skyworks Solutions
Skyworks Solutions SI3000-C-FS is a 16-bit voice-band audio codec with a serial interface, programmable input and output gain or attenuation, microphone bias, a handset hybrid circuit, and output drive for 32-ohm headphones. The device operates from 3 V to 5.25 V and is packaged in a 16-pin SOIC. A voice-band audio codec converts analog voice signals into digital data for transmission and reconstructs digital audio into an analog signal for playback. The SI3000-C-FS integrates several telephone-interface functions that otherwise require separate components, including microphone amplification, output drive, microphone bias, and handset hybrid support. Its 16-bit serial interface allows it to connect with compatible modem and data-access-arrangement devices. Programmable input and output gain or attenuation provide control over signal levels in analog voice paths. The integrated microphone bias circuit supports microphone-based input stages, while the output driver is specified for 32-ohm headphones. These functions reduce the number of external analog components required in a voice-band interface. The SI3000 family is intended for voice-band equipment, including ISOmodem and digital access equipment. The SI3000-C-FS can connect directly to Si3035, Si3044, and Si3056 North American and international DAA chipsets through the serial interface, allowing an analog voice path to be paired with an established line-interface chipset. Supply-voltage operation from 3 V to 5.25 V makes the codec usable in 3.3 V and 5 V systems. The listed operating-temperature range is 0 C to 70 C. Because this is a mixed analog-and-serial-interface device, correct grounding, supply decoupling, clock implementation, and layout of the voice path directly affect signal integrity and audio performance. For a new design, use the manufacturer pin-description table and recommended application circuit when assigning PCB tracks, setting gain, and selecting support components. Pay particular attention to analog and digital return paths, the microphone-bias connection, and the output-drive network. The 16-pin SOIC footprint supports conventional surface-mount assembly but requires adequate copper and thermal considerations for reliable soldering. This page combines device capabilities, application fit, sourcing guidance, and practical design notes to help engineers evaluate the SI3000-C-FS for compact voice-band systems. It also distinguishes verified compatibility from unknown replacement options so procurement decisions can be based on package, interface, and electrical requirements rather than MPN similarity alone.
SI3000-C-FSR - 16-Bit Voice Codec | Skyworks Solutions (Tape & Reel)
Skyworks Solutions SI3000-C-FSR is a 16-bit voice-band audio codec with a serial interface, programmable input and output gain or attenuation, microphone bias, a handset hybrid circuit, and output drive for 32-ohm headphones. The device operates from 3 V to 5.25 V and is packaged in a 16-pin SOIC. A voice-band audio codec converts analog voice signals into digital data for transmission and reconstructs digital audio into an analog signal for playback. The SI3000-C-FSR integrates several telephone-interface functions that otherwise require separate components, including microphone amplification, output drive, microphone bias, and handset hybrid support. Its 16-bit serial interface allows it to connect with compatible modem and data-access-arrangement devices. Programmable input and output gain or attenuation provide control over signal levels in analog voice paths. The integrated microphone bias circuit supports microphone-based input stages, while the output driver is specified for 32-ohm headphones. These functions reduce the number of external analog components required in a voice-band interface. The SI3000 family is intended for voice-band equipment, including ISOmodem and digital access equipment. The SI3000-C-FSR can connect directly to Si3035, Si3044, and Si3056 North American and international DAA chipsets through the serial interface, allowing an analog voice path to be paired with an established line-interface chipset. Supply-voltage operation from 3 V to 5.25 V makes the codec usable in 3.3 V and 5 V systems. The listed operating-temperature range is 0 C to 70 C. Because this is a mixed analog-and-serial-interface device, correct grounding, supply decoupling, clock implementation, and layout of the voice path directly affect signal integrity and audio performance. For a new design, use the manufacturer pin-description table and recommended application circuit when assigning PCB tracks, setting gain, and selecting support components. Pay particular attention to analog and digital return paths, the microphone-bias connection, and the output-drive network. The 16-pin SOIC footprint supports conventional surface-mount assembly but requires adequate copper and thermal considerations for reliable soldering. This page combines device capabilities, application fit, sourcing guidance, and practical design notes to help engineers evaluate the SI3000-C-FSR for compact voice-band systems. It also distinguishes verified compatibility from unknown replacement options so procurement decisions can be based on package, interface, and electrical requirements rather than MPN similarity alone.
SI3000-C-GS - 16-Bit Voice-Band Audio Codec | Skyworks
The Skyworks Solutions Inc. SI3000-C-GS is a 16-bit voice-band audio codec with 84 dB ADC dynamic range, 84 dB DAC dynamic range, and 4–12 kHz sample rates in a 16-SOIC package. It integrates a 30 dB microphone preamplifier, programmable input and output gain or attenuation, microphone bias, handset hybrid circuitry, and output drive for 32 Ω headphones. A voice-band codec is a specialized audio interface that converts analog microphone or line-level signals into a digital serial stream and converts digital audio back into an analog output. Within the hierarchy of audio codecs, line codecs, audio interface ICs, and interface semiconductors, it concentrates several telephone and modem signal-chain functions into one device. Its narrowband sampling range is intended for speech rather than hi-fi music. The SI3000-C-GS provides one ADC and one DAC, both using 16-bit resolution. Programmable input and output gain or attenuation gives the system designer control over signal levels, while the 30 dB microphone preamplifier supports direct microphone conditioning. The integrated bias circuit reduces external microphone-support requirements, and the headset driver is specified for 32 Ω loads. Integration is a central advantage because the codec combines the analog voice interface, conversion functions, and telephone-support circuitry. According to the manufacturer datasheet, the device can connect directly with Si3034, Si3035, Si3044, and Si3056 data-access arrangements and chipsets. These interfaces support voice-band modem and telephone equipment where board area and component count are important constraints. Typical applications include voice-band modems, telephone interface boards, handsets, speakerphones, voicemail equipment, and data-access adapters. The 16-SOIC package also makes the SI3000-C-GS suitable for designs that require conventional surface-mount assembly rather than a high-density land grid array. When designing around this codec, verify the required analog supply, digital interface voltage, sampling clock, and serial device configuration against the manufacturer pin descriptions and application guidance. Decoupling, grounding, and microphone-bias layout remain critical because they directly influence noise, distortion, and voice intelligibility. This product data combines the confirmed electrical characteristics, package information, interface functions, application fit, and design considerations needed to evaluate the SI3000-C-GS for a voice-band audio signal chain.
SI3000-C-GSR - 16-Bit Voice-Band Audio Codec | Skyworks (Tape & Reel)
The Skyworks Solutions Inc. SI3000-C-GSR is a 16-bit voice-band audio codec with 84 dB ADC dynamic range, 84 dB DAC dynamic range, and 4–12 kHz sample rates in a 16-SOIC package. It integrates a 30 dB microphone preamplifier, programmable input and output gain or attenuation, microphone bias, handset hybrid circuitry, and output drive for 32 Ω headphones. A voice-band codec is a specialized audio interface that converts analog microphone or line-level signals into a digital serial stream and converts digital audio back into an analog output. Within the hierarchy of audio codecs, line codecs, audio interface ICs, and interface semiconductors, it concentrates several telephone and modem signal-chain functions into one device. Its narrowband sampling range is intended for speech rather than hi-fi music. The SI3000-C-GSR provides one ADC and one DAC, both using 16-bit resolution. Programmable input and output gain or attenuation gives the system designer control over signal levels, while the 30 dB microphone preamplifier supports direct microphone conditioning. The integrated bias circuit reduces external microphone-support requirements, and the headset driver is specified for 32 Ω loads. Integration is a central advantage because the codec combines the analog voice interface, conversion functions, and telephone-support circuitry. According to the manufacturer datasheet, the device can connect directly with Si3034, Si3035, Si3044, and Si3056 data-access arrangements and chipsets. These interfaces support voice-band modem and telephone equipment where board area and component count are important constraints. Typical applications include voice-band modems, telephone interface boards, handsets, speakerphones, voicemail equipment, and data-access adapters. The 16-SOIC package also makes the SI3000-C-GSR suitable for designs that require conventional surface-mount assembly rather than a high-density land grid array. When designing around this codec, verify the required analog supply, digital interface voltage, sampling clock, and serial device configuration against the manufacturer pin descriptions and application guidance. Decoupling, grounding, and microphone-bias layout remain critical because they directly influence noise, distortion, and voice intelligibility. This product data combines the confirmed electrical characteristics, package information, interface functions, application fit, and design considerations needed to evaluate the SI3000-C-GSR for a voice-band audio signal chain.
SI3000-KS - 16-Bit Voice Codec | Skyworks Solutions
Skyworks Solutions SI3000-KS is a 16-bit voice-band interface codec with one ADC channel and one DAC channel, supporting sample rates from 4 kHz to 12 kHz in a 16-pin SOIC package. The verified listing identifies 84 dB ADC dynamic range, 84 dB DAC dynamic range, a 30 dB microphone preamplifier, programmable input gain or attenuation, and programmable output gain or attenuation. It is intended for voice-band audio systems requiring integrated conversion and microphone or speaker drive functions. The distributor data also identifies the SI3000-KS as a leaded interface codec and reports that Skyworks recommends the Si3000-C-FS datasheet for current design work. This means lifecycle status should be confirmed before new production commitments, although the SI3000-KS remains listed by distributors. A voice-band codec is an audio interface integrated circuit that converts analog microphone or line-level signals into digital PCM data and converts digital audio back into an analog output. In the broader device hierarchy, the SI3000-KS belongs to audio codecs, interface ICs, signal-conversion devices, and semiconductor components. Its one-ADC and one-DAC architecture is suitable for compact telephony, communications, embedded voice, and audio-assistance designs where a dedicated low-bandwidth audio path is required. The 4 kHz to 12 kHz sample-rate range targets narrow voice bandwidth rather than full-spectrum hi-fi audio. The main engineering benefits are the stated 84 dB conversion dynamic range, integrated microphone and speaker-drive support, and programmable analog gain controls. Input gain or attenuation helps match microphone levels to the converter, while output gain or attenuation helps condition the playback signal before the speaker amplifier. The 30 dB microphone preamplifier provides additional headroom for weak microphone sources. Because the verified data does not provide supply voltage, clock requirements, control-interface details, absolute maximum ratings, or thermal data, those values must be obtained from the manufacturer datasheet before final schematic or PCB approval. Use the SI3000-KS when the design specifically needs a narrowband voice codec with integrated ADC, DAC, microphone preamplification, and programmable gain. Suitable application directions include telephone handsets, intercom systems, industrial voice terminals, automotive voice interfaces, and embedded communication modules. The automotive positioning appears in distributor descriptions, but qualification status and exact environmental requirements are not independently established by the supplied data and therefore remain unknown. A design must also verify that the required sample rate, serial interface, audio levels, power rails, and external components match the device datasheet. The principal design consideration is lifecycle risk. Mouser states “Leaded - Not recommended for new designs, see Si3000-C-FS datasheet,” while DigiKey lists SI3000-KS for purchase. Engineers should therefore treat the SI3000-KS as a potentially legacy or transition-related device and compare it with the recommended current family before committing a new design. The exact pinout is not reproduced in the supplied verified snippets, so pin-level wiring must be confirmed from the official manufacturer datasheet. This page combines the verified distributor classification and specifications with procurement context and design guidance without inventing missing electrical parameters. This page synthesizes distributor listings, lifecycle notices, codec specifications, replacement guidance, and practical application considerations. It distinguishes verified facts from unavailable parameters, highlights the Skyworks recommendation concerning Si3000-C-FS, and avoids treating a distributor availability statement as proof of long-term design support.
SI3216-BT - 38-TSSOP Voice SLIC/CODEC | Silicon Labs
Silicon Labs SI3216-BT is a single-channel ProSLIC analog telephone interface with GCI, PCM, and SPI interfaces, a 3.13 V to 5.25 V supply range, and a 38-pin TSSOP package. It supports wideband audio from 50 Hz to 7.0 kHz and narrowband audio from 200 Hz to 3.4 kHz, including 16-bit voice processing at a 16 kHz sampling rate. A SLIC, or subscriber line interface circuit, is the analog front end used to connect a telephone line to a digital voice system. It belongs to the codec and telephone-interface hierarchy within integrated interface ICs. By combining line-interface circuitry with voice encoding functions, the SI3216-BT is designed for Voice-over-IP gateways, analog terminal adapters, voice gateways, and other equipment that connects a copper-wire telephone line to a digital voice processor. The SI3216-BT combines a 1-channel SLIC/CODEC architecture with support for both wideband and narrowband operating modes. Its stated supply current is 88 mA, its rated power dissipation is 700 mW, and its operating temperature range is -40°C to +85°C. GCI, PCM, and SPI interfaces give system designers several paths for connecting the device to line-processing and control electronics. The industrial-temperature grade suits equipment expected to operate across extended commercial temperature environments. Technical operation depends on a low-voltage CMOS implementation operating from 3.13 V to 5.25 V. Wideband mode covers 50 Hz to 7.0 kHz for enhanced-voice systems, while narrowband mode covers 200 Hz to 3.4 kHz for conventional telephony. The 16-bit, 16 kHz codec capability supports digital voice processing with a 50% sampling margin relative to an 8 kHz narrowband voice channel, while wideband speech remains compatible with the specified 7.0 kHz audio bandwidth. Typical applications include VoIP analog terminal adapters, digital subscriber line equipment, voice-over-PBX gateways, voice-over-cable terminal adapters, and embedded analog telephone interfaces. Its principal design value is integrating the subscriber-line interface and codec into one device, reducing the number of separate analog and digital interface blocks required in a voice terminal. Layout and power-supply design remain critical in a high-gain telephone interface. Place bypass and decoupling capacitance close to the supply pins, keep sensitive analog routing away from digital switching signals, and follow the manufacturer’s reference-layout guidance. Verify line-side protection, grounding, and maximum operating voltages against the requirements of the target telephone network before releasing production hardware. This product record combines electrical specifications, interface details, application guidance, and a verified same-family alternative comparison. It is intended to help engineers confirm electrical, packaging, lifecycle, and design requirements before integrating the SI3216-BT into a telephone-interface design.
STA304A - 6-Channel Digital Audio Processor | STMicroelectronics
STMicroelectronics STA304A is a fully integrated, 6-channel digital audio processor with I2C and I2S interfaces, a 3 V to 3.6 V supply range, and a 44-TQFP 10 mm by 10 mm package. It belongs to STMicroelectronics' DDX family of digital audio processors and is designed to provide centralized digital signal processing for multichannel audio systems. The verified product data identifies the device as obsolete, so new production procurement should be treated as constrained. A digital audio processor is a specialized integrated circuit that receives, processes, and distributes digital audio signals within an audio system. In the broader product hierarchy, the STA304A is an audio processor, which is a form of audio special-purpose IC and therefore part of the wider semiconductor and signal-processing ecosystem. Its I2C interface supports control and configuration, while its I2S interface supports serialized digital audio data transfer. The STA304A provides six digital audio channels in one integrated device. This channel count allows one processor to coordinate multichannel audio routing and processing rather than requiring a separate discrete solution for each channel. Its 3 V to 3.6 V operating supply range allows integration into compatible 3.3 V audio equipment. The 44-TQFP surface-mount package provides a compact solution for multichannel consumer audio products. The device combines digital audio processing, control connectivity, and multichannel interface functionality in a single package. According to the verified STMicroelectronics product information, its supported interfaces are I2C and I2S. I2C is useful for configuration and register access, while I2S carries digital audio samples between the processor and codecs, amplifiers, converters, or other digital audio endpoints. Typical uses include active speakers, multichannel home-audio equipment, digital mixing equipment, and other consumer audio systems that require centralized multichannel processing. In an I2S audio path, the STA304A can sit between a digital audio source and one or more audio codecs. The supplied product information does not specify sample rate, processing latency, channel mapping, or output-routing details, so those characteristics must be confirmed in the manufacturer datasheet before design release. Engineers should pay particular attention to the obsolete lifecycle status and validate interface timing, power sequencing, and channel assignment against the manufacturer documentation. Because the verified information identifies the part as obsolete, boards requiring long-term availability may need an approved redesign rather than a routine procurement substitution. Any replacement should be evaluated for package, pinout, supply voltage, I2C behavior, and I2S signal compatibility. This product record combines verified distributor and manufacturer-linked information with practical sourcing, design, and replacement guidance. It distinguishes confirmed STA304A characteristics from parameters that remain unavailable, helping engineers make informed decisions without treating an unverified alternative as a guaranteed drop-in replacement.
STA30813TR - 8-Channel 24-Bit DDX Audio Processor | STMicroelectronics
The STMicroelectronics STA30813TR is an eight-channel multichannel digital audio processor with DDX processing, 24-bit operation, and support for input sample rates from 192 kHz down to the audio-band rates supported by the device family. The processor is packaged in a 64-lead TQFP measuring 10 x 10 mm and is intended for tone control, preamplification, and multichannel audio signal processing. An audio processor is a specialized signal-processing IC that applies gain, volume, filtering, and other control functions to multiple digital audio channels. Within the signal-chain hierarchy, it sits between an audio ADC or digital audio source and a DAC or power-amplifier stage. Instead of using one external preamplifier per channel, an integrated processor can centralize control across eight channels and reduce the number of external analog-control components. The STA30813TR provides eight 24-bit DDX channels, a variable digital gain range of 24 dB in 0.5 dB steps, and volume control in 0.5 dB steps. A digital limiter function helps control signal excursions. These features make the device applicable to multichannel preamplifiers, active speaker systems, home-theater audio, and professional audio equipment requiring coordinated channel-level adjustment. Its multichannel architecture allows common processing parameters to be applied across several audio paths. Digital gain and volume adjustments can be performed after conversion into the digital domain, which helps keep channel balance consistent and reduces sensitivity to component tolerance compared with purely analog gain control. The exact supported interface modes and configuration options should be confirmed in the manufacturer datasheet before layout is finalized. Typical uses include digital preamplifier boards, eight-channel mixer modules, powered-speaker control boards, surround-sound systems, and audio receiver or amplifier subsystems. The 10 x 10 mm TQFP package keeps the device compact while exposing enough pins for digital audio connections, control signals, clocking, power, and configuration functions. When designing around this obsolete device, verify every pin assignment, supply requirement, interface mode, and clock configuration against the original manufacturer datasheet. Board bring-up should also confirm the expected DDX behavior and limiter settings, particularly when the processor sits in a high-gain or live-signal path. This page consolidates the confirmed channel-count, bit-depth, gain, volume-control, packaging, and temperature information, while separating confirmed drop-in references from options that require additional compatibility verification. It also provides design guidance and application context that are not present in a basic distributor listing.
TAS5026IPAG - 6-Channel Digital Audio PWM Processor | TI
Texas Instruments TAS5026IPAG is a six-channel digital audio PWM processor designed for high-fidelity digital audio interfacing, with operation across sample rates from 32 kHz to 192 kHz. The device supports I2C and I2S interfaces and is packaged in a 64-pin TQFP measuring 10 mm by 10 mm. Its architecture converts digital audio streams into six independently addressed PWM output channels for multichannel audio systems. A digital audio PWM processor is an interface IC that accepts encoded digital audio data, processes that data internally, and generates PWM signals suitable for driving audio output stages. Within the signal chain, it sits between a digital audio source and the power amplifier or speaker-driver circuitry. Unlike a conventional audio DAC followed by a separate modulator, this integrated processor combines digital data handling and PWM generation in one device. The principal features of the TAS5026IPAG include six audio channels, digital I2S input, I2C control, and support for sample rates spanning 32 kHz through 192 kHz. These capabilities make the processor relevant to home-theater systems, multichannel powered speakers, active speaker arrays, and automotive audio designs. The broad sample-rate range supports conventional CD-rate audio as well as high-resolution PCM streams. Texas Instruments describes the TAS5026 as a PurePath Digital audio modulator IC. Its digital control interface allows an embedded controller or system-on-chip to configure operating behavior, while the I2S interface receives audio data from a digital source. Because PWM output generation is consolidated into the processor, system designers can evaluate the complete digital-to-PWM signal path before adding external amplification and loudspeaker stages. Typical applications include six-channel powered speakers, surround-sound receivers, active subwoofers, multimedia speaker systems, automotive head units, and home-audio distribution products. A typical implementation places the processor after an I2S-compatible audio source, connects I2C control lines to the system controller, and routes six PWM outputs toward amplifier inputs or external bridge drivers. PCB design must preserve the integrity of the digital audio and clock connections while keeping switching outputs away from sensitive analog and control paths. Decoupling should be placed close to the device pins, and ground-return paths should follow the manufacturer layout recommendations. The 10 mm by 10 mm TQFP footprint also requires adequate solderable area and careful inspection of fine-pitch joints after assembly. This product page combines the device identity, package information, interface characteristics, lifecycle details, and procurement workflow into a design-oriented reference. It also distinguishes the documented TAS5026 order variant from similarly named components and provides actionable guidance for PCB layout, digital-audio integration, and drop-in replacement assessment.
TAS5066PAG - 6-Channel 24-Bit PWM Audio Processor | TI
Texas Instruments TAS5066PAG is a six-channel, 24-bit digital audio PWM processor with a 64-TQFP package measuring 10 mm by 10 mm. It operates from a 3 V to 3.6 V supply, supports sample rates from 44.1 kHz to 192 kHz, and provides I2S and I2C interfaces for digital audio data transfer and configuration. The device is designed to generate PWM-based audio output signals for multichannel audio power amplifier systems. A digital audio PWM processor is an interface and signal-generation IC positioned between a digital audio source and a class-D-style output stage. Its hierarchy is digital audio processor, audio interface IC, integrated circuit, and semiconductor. Rather than directly driving a conventional analog input, it accepts digital audio data and produces PWM control information for compatible power stages. This division of responsibilities allows a system to retain a digital audio datapath while placing the high-current, high-voltage amplification function in a dedicated power stage. The TAS5066PAG provides six processing channels, a 24-bit audio data resolution, and support for audio sample rates ranging from 44.1 kHz through 192 kHz. These parameters suit multichannel consumer, communications, and embedded audio designs in which multiple synchronized output channels are required. The 3 V to 3.6 V operating range also places the device in power domains commonly used by digital audio logic. I2S supports synchronized audio streaming, while I2C provides a separate control path for configuration and register access. The device integrates digital audio processing and PWM generation in one 64-pin TQFP package. According to the Texas Instruments TAS5066 datasheet, the supported initialization procedures cover changing data rates and switching between master and slave operating modes. Master mode provides a device-generated timing reference, whereas slave mode allows the processor to synchronize with an external audio master. These operating modes support integration into systems where the clock and sample-rate architecture must follow a central audio controller. Typical uses include multichannel powered speakers, audio docking systems, home entertainment equipment, and compact digital audio subsystems. The six-channel architecture can feed a bank of compatible output stages, while the broad sample-rate range covers CD-rate 44.1 kHz sources as well as higher-rate 48 kHz, 96 kHz, and 192 kHz streams. The Texas Instruments TAS5111DAD is a relevant output-stage companion because it is designed to work with TAS5066-family digital audio processing in PurePath applications. A primary design consideration is digital clocking. I2S data, master or slave timing, and sample-rate changes must be coordinated to prevent channel misalignment. The 64-TQFP footprint also requires careful fanout of power, ground, clock, data, and control signals. Use the manufacturer pin-description table and recommended application schematic when assigning PCB tracks and configuring the device registers. This product page consolidates the confirmed TAS5066PAG electrical limits, interface capabilities, package details, sourcing parameters, and verified drop-in cross-reference into an engineering-oriented reference. It also identifies the Texas Instruments TAS5111DAD as a companion output stage and explains the clocking, layout, and replacement considerations that matter when designing a six-channel digital audio PWM subsystem.
TAS5504APAG - 4-Channel Digital Audio PWM Processor | Texas Instruments
The Texas Instruments TAS5504APAG is a four-channel digital audio PWM processor packaged in a 64-pin TQFP measuring 10 mm by 10 mm. It is designed to generate four independent Class-D audio output channels from digital audio data, combining digital signal processing, PWM modulation, and integrated audio output control in one device. A digital audio PWM processor is a specialized interface and signal-processing IC that converts digital audio samples into controlled PWM drive signals for power stages. In the broader power-management and audio-system hierarchy, it connects a digital audio source, such as a USB, network, or optical audio interface, to the PWM inputs of an external Class-D amplifier. The TAS5504A family therefore occupies the signal-generation stage between digital audio data and the analog power-amplifier output stage. The device's defining product features are its four-channel architecture, 64-pin TQFP package, and 10 mm by 10 mm body size. The manufacturer categorizes it as a digital audio PWM processor and as an audio modulator. Its four-channel structure allows one processor to manage multiple audio zones or paired amplifier channels while reducing the number of discrete control and modulation functions required in a multi-channel audio system. As a digital signal-processing and modulation device, the TAS5504A accepts digital audio information and applies embedded processing functions before producing PWM control waveforms for downstream power stages. This architecture allows audio-system design decisions to be centralized in the processor rather than distributed across separate digital-to-analog conversion, analog filtering, and modulation blocks. Exact signal formats, sampling rates, filter characteristics, clock requirements, and electrical limits must be confirmed in the manufacturer datasheet for the specific power-amplifier design. Typical applications include multi-channel home-theater and powered-speaker systems, active crossover networks, soundbars, professional audio equipment, and compact consumer-audio products. Its four-channel organization is particularly useful when two stereo amplifier channels must share one digital-audio source or when several independently controlled amplifier zones require synchronized digital modulation. The processor should be paired with an external Class-D output stage because it generates PWM control signals rather than directly delivering high-power speaker current. Layout is critical because digital clocking, PWM outputs, analog supply rails, and ground returns meet on a dense 64-pin surface-mount package. Keep high-current amplifier paths physically separate from the TAS5504APAG, use the manufacturer-recommended power and ground-plane arrangements, and provide local bypassing at the device supply pins. A solid return path and careful isolation of switching-node energy reduce the risk of audible artifacts or modulation instability. This page organizes the manufacturer device information, package characteristics, sourcing questions, application guidance, and confirmed same-footprint alternatives into a practical engineering reference. It also separates documented product facts from parameters that still require verification, helping designers decide when the TAS5504APAG is appropriate and what must be checked before committing a four-channel Class-D audio design to production.
TLV320AC37CN - 3V Voice-Band Audio Processor | Texas Instruments
The TLV320AC37CN is a voice-band audio processor (VBAP) from Texas Instruments, designed for single 3-V operation with low power consumption. It integrates a combined A/D, D/A converter and filters, supporting sample rates up to 16 kHz and a pass-band to 7.2 kHz. The device is housed in a 20-pin PDIP package, making it suitable for through-hole assembly in telecommunication and audio applications. A voice-band audio processor (VBAP) is a specialized mixed-signal IC that combines analog-to-digital and digital-to-analog conversion with filtering and signal processing optimized for the 300 Hz to 3.4 kHz voice band. It sits within the broader category of audio codecs, which are essential in telephony, intercoms, and voice-controlled systems. The TLV320AC37CN specifically targets low-power, battery-operated voice applications, offering a complete analog front-end and codec in a single package. Key features include a low operating power of 20 mW typical, standby mode at 5 mW, and power-down mode at 2 mW. The device supports extended variable-frequency operation with sample rates up to 16 kHz and a pass-band to 7.2 kHz. It includes an electret microphone interface, making it ideal for direct connection to electret condenser microphones. The combined A/D, D/A, and filters simplify system design by reducing external components. Technically, the TLV320AC37CN employs a CMOS process and operates from a single 3-V supply, which is critical for portable and battery-powered equipment. The device features a PCM codec interface with A-law companding, suitable for digital telephony standards. The through-hole PDIP-20 package ensures easy prototyping and manual assembly, though it limits high-density applications compared to surface-mount alternatives. Typical applications include digital telephone answering machines, speakerphones, intercom systems, and voice recorders. The low power consumption and 3-V operation make it particularly suited for battery-powered devices where efficiency is paramount. The integrated filters and codec reduce BOM cost and board space. When designing with this device, ensure proper decoupling of the 3-V supply and careful layout of the analog and digital sections to minimize noise coupling. The device is now obsolete, so consider pin-compatible alternatives for new designs.
TLV320AIC3110IRHBT - Low-Power Audio Codec with Class-D Amp | TI
The TLV320AIC3110IRHBT is a low-power, highly integrated audio codec from Texas Instruments, featuring a stereo audio DAC and a mono audio ADC, along with a 1.3W stereo Class-D speaker amplifier. It supports 32-bit audio data and communicates via I2C or serial interface. The device is housed in a 32-pin VQFN (5x5 mm) package, making it suitable for space-constrained portable applications. An audio codec is a device that encodes and decodes digital audio data, converting between analog and digital domains. It typically includes ADCs and DACs, along with signal processing and amplification stages. In a system hierarchy, an audio codec sits between the digital audio processor (e.g., DSP or SoC) and the analog audio output (speakers, headphones) or input (microphones). It is a critical component in portable electronics, automotive infotainment, and IoT devices. Key features of the TLV320AIC3110 include a 1.3W stereo Class-D speaker amplifier, which provides high efficiency for battery-powered devices. The device supports a wide analog supply range of 2.7V to 3.6V, a digital core supply of 1.525V to 1.95V, and a digital I/O supply of 1.1V to 3.6V. It also includes a programmable digital sine-wave generator and extensive register-based power control for optimizing power consumption. Technically, the TLV320AIC3110 integrates a low-power stereo DAC with 32-bit resolution and a mono ADC, supporting sample rates up to 96 kHz. The Class-D amplifier delivers 1.3W per channel into 8 ohms with low distortion. The device features a 5x5 mm VQFN package with exposed thermal pad for improved heat dissipation. It operates over the industrial temperature range of -40°C to +85°C. Typical applications include portable audio players, smartphones, tablets, and IoT devices requiring high-quality audio playback and recording. The integrated Class-D amplifier eliminates the need for an external amplifier, reducing BOM cost and board space. The I2C control interface allows easy integration with microcontrollers and DSPs. When designing with this device, ensure proper decoupling of the analog and digital supplies, and place the Class-D amplifier output filters close to the device to minimize EMI. The thermal pad should be soldered to a copper pour for effective heat dissipation.
WM1800CGEFL/V - 32-QFN Audio Codec IC, Sigma-Delta | Cirrus Logic
The Cirrus Logic WM1800CGEFL/V is a mixed-signal audio codec integrated circuit from the Wolfson Microelectronics product line, supplied as a tested 32-pin QFN surface-mount device in a 5 x 5 x 0.9 mm no-lead package. Distributor catalogues place the WM1800 family under the Analog & Mixed Signal / CODECs classification, and the device is built around a sigma-delta conversion architecture for audio signal paths. An audio codec is a mixed-signal integrated circuit that translates between digital audio data streams and analog audio voltages. It sits inside the wider semiconductor hierarchy as a mixed-signal IC, more specifically a codec, and it usually pairs one or more analog-to-digital converters with one or more digital-to-analog converters plus the digital interface logic needed to move audio frames to and from a host processor. Because the codec performs both conversion directions on the same die, it saves board area and simplifies the analog signal chain around it. Key characteristics of the WM1800CGEFL/V include its 32-pin QFN-32 footprint, the compact 5 x 5 x 0.9 mm body, and the sigma-delta conversion topology identified in the component listings. The part is offered in a tested condition for industrial and repair-grade sourcing, and the /V ordering suffix corresponds to tube packaging while the /RV suffix denotes the tape-and-reel presentation of the same device. RoHS status is listed inconsistently across supply-chain listings, with some entries marked compliant and others marked not compliant, so the declaration should be confirmed against the specific lot paperwork before use in a certified build. Technically the device integrates its converters, reference and interface circuitry into a single no-lead QFN. QFN construction means there are no protruding gull-wing leads, so the part cannot be hand-soldered and is placed by pick-and-place with a bottom-side thermal and ground land pattern. The published listings confirm a sigma-delta converter architecture, which is the standard choice for high-resolution audio because it pushes the quantisation noise out of band where it is removed by the digital decimation filters. Typical uses include portable and personal-audio equipment, headset and docking-station interfaces, USB audio accessories, compact consumer audio appliances and equipment-repair and legacy-platform builds where an original audio codec has to be replaced without redesigning the printed circuit board. In each case the codec sits between an analog microphone or line input and a digital audio bus, or between a digital stream and an analog headphone or line output. The main design consideration is that this is a mature catalog part from the Wolfson Microelectronics range, so engineers should confirm the exact pin assignment, supply rails, converter resolution and clocking requirements from the manufacturer datasheet before committing to a design, and should verify that the surrounding decoupling and grounding topology matches the reference circuit for the specific variant. Because the package is QFN-32 with a bottom thermal land, board-level copper must be adequate for the dissipation of the codec in a densely packed portable product. This page combines distributor catalogue data, ordering-code analysis, drop-in ordering options and practical integration notes for the WM1800CGEFL/V in a single place, giving engineers sourcing and design information beyond the short catalogue entry.
WM1811AECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic
Cirrus Logic WM1811AECS/R is a highly integrated stereo audio codec with 24-bit I2S and PCM interfaces, two integrated analog-to-digital converters, two digital-to-analog converters, and integrated Class D and Class W headphone-driver capability. The device is supplied in an 80-ball wafer-level chip-scale package measuring 4.16 mm by 3.88 mm and is intended for smartphones and other portable multimedia products. An audio codec combines signal conversion and digital audio-interface functions within one integrated circuit. The codec hierarchy begins with the ADC and DAC converters, continues through the stereo audio codec, and extends into the broader category of audio interface ICs used for digital signal conversion and device-to-device audio communication. Integrating these functions reduces the number of external audio components required in portable equipment. The WM1811A family is designed for low-power, high-fidelity portable audio. Its stereo signal path supports 24-bit I2S and PCM digital audio, while the integrated speaker and headphone drivers reduce the need for separate output-driver devices. The manufacturer describes the part as requiring two voltage supplies, with other internal supply rails generated by integrated low-dropout regulators. This architecture supports compact layouts where component count, board area, and power-management complexity are important. The WM1811AECS/R combines analog stereo capture and playback in a package measuring 4.16 mm by 3.88 mm. Its integrated Class D speaker driver and Class W headphone driver are intended to reduce external circuitry and simplify portable-device signal chains. The 80-WCSP format requires a dense, high-density PCB layout and careful component placement to maintain short analog and digital return paths. Typical uses include smartphone call and media processing, portable media players, connected personal-audio equipment, and compact multimedia systems. A smartphone implementation can route microphone signals through the stereo ADCs, exchange PCM or I2S audio with an application processor, and use the integrated playback drivers for speaker or headphone output. The codec architecture is particularly useful where a conventional discrete ADC, DAC, and output-driver chain would consume excessive board area. Designers should treat microphone, headphone, speaker, digital-interface, and power connections as separate high-value signal paths. Place passive components adjacent to their associated balls, use short ground returns, and verify that the board layout preserves clean analog performance and correct class-D output behavior. Before release, compare the selected PCB footprint, ball assignments, supply requirements, and acoustic test conditions against the manufacturer datasheet. This page consolidates the known WM1811AECS/R device description, package information, application guidance, pin-access notes, and drop-in replacement assessment. It also distinguishes a verified same-family alternative from the many general audio codecs that use incompatible packages or interfaces, helping engineers avoid substitutions that require PCB redesign.
WM1811GECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic
The Cirrus Logic WM1811GECS/R is a 24-bit stereo audio codec with two analog-to-digital converters and two digital-to-analog converters, supplied in an 80-ball WCSP package measuring 4.16 mm by 3.88 mm. The device also provides three digital audio interfaces for connecting a host processor to external converters or additional audio paths. Its analog supply voltage is specified from 1.71 V to 2 V. An audio codec is an integrated circuit that converts between digital audio data and analog microphone or line-level signals. In the signal chain, a codec belongs to the audio interface IC family, which sits between audio transducers and the digital host processor. Sigma-delta converters are used inside the device to perform analog-to-digital and digital-to-analog conversion while shaping quantization noise away from the audible signal band. The WM1811GECS/R supports 24-bit conversion through two ADC channels and two DAC channels. Its digital interfaces make it suitable for portable consumer equipment, personal audio products, and embedded systems that require bidirectional analog audio connectivity in a compact package. The three digital audio interfaces allow the system designer to route additional digital audio streams between the codec and a host or external audio device. The 80-ball WCSP construction supports high-density assembly and short PCB interconnect paths, although its fine pitch demands careful stencil design, reflow-profile control, and inspection. Because an exposed acoustic and electrical environment surrounds the converter sections, layout must separate analog input, analog output, digital interface, and supply-return paths. Decoupling networks and controlled grounding are as important as the nominal 1.71 V to 2 V analog supply range. Typical uses include stereo headphone and line-output stages, digital microphone systems, docking stations, portable media accessories, and audio interface modules. The compact package is especially useful when board area is constrained, while the multiple digital interfaces allow external high-performance converters to be added without changing the host-side firmware architecture. Design conservatively around supply sequencing, analog signal levels, and interface format. Confirm the required I2C address, digital audio format, clock topology, and supported sample rates against the manufacturer datasheet before routing the PCB. Keep switching regulators and their high-current return paths away from the analog converter balls. This page organizes the codec specifications, verified distributor listings, practical integration notes, and qualification of genuine drop-in alternatives. It also separates confirmed device attributes from parameters that require confirmation before schematic release, helping engineers shorten the path from component selection to a production-ready audio board.
WM8044CFN Audio Channel IC | Texas Instruments
The Texas Instruments WM8044CFN is a programmable audio-channel integrated circuit offered in a package identified by the “CFN” ordering suffix. The verified source data classifies WM8044CFN as an audio-channel IC from Texas Instruments, but it does not provide a manufacturer datasheet, electrical tables, pin names, package dimensions, or confirmed feature set. Accordingly, its exact operating voltage, audio bandwidth, channel architecture, control interface, clock requirements, and environmental ratings remain unspecified. The available distributor listing shows the part as available for ordering, while LCSC reports a price from $11.4948 as of 2026-10-23. A DigiKey listing under Rochester Electronics provides another commercial source for procurement. What is a programmable audio-channel IC? It is an audio signal-processing semiconductor that receives, routes, filters, mixes, converts, or otherwise conditions audio signals under digital or analog control. Within the electronics hierarchy, an audio-channel IC belongs to audio signal-processing ICs, a specialized type of interface or logic-adjacent integrated circuit. Its exact architecture cannot be inferred safely from the generic distributor classification alone, so engineers should consult the original Wolfson or Texas Instruments documentation before schematic capture. The most decision-relevant verified features are the MPN, manufacturer association, and device category. Search results identify WM8044CFN as a Texas Instruments audio-channel device and also describe it as a WOLFSON programmable logic IC in one marketplace listing. That historical WOLFSON association may help locate archived documentation, but it is not sufficient proof that any similarly named part is electrically or pin-for-pin replaceable. Typical uses cannot be assigned safely without the datasheet. Audio-channel ICs may serve portable audio, digital home audio, communications, or interface systems, but those possibilities are not verified WM8044CFN applications. Likewise, no performance claim regarding signal-to-noise ratio, total harmonic distortion, sample rate, channel count, or power consumption is supported by the supplied evidence. For design-in work, the critical first step is to obtain the authoritative WM8044 family datasheet, register map, application circuit, and pin description. Do not infer connections from the CFN suffix or from distributor board-layout references. Check the exact pin count and exposed-pad requirements before PCB layout because neither value appears in the verified data. This page combines verified distributor availability, the $11.4948 LCSC starting price, category information, sourcing links, and explicit data gaps. It avoids fabricating electrical specifications or offering unverified drop-in substitutes, thereby supporting component identification and procurement while reserving engineering approval until the original manufacturer documentation is available.
WM8144CCPT Audio Channel IC | Texas Instruments
The Texas Instruments WM8144CCPT is an audio-channel integrated circuit listed by DigiKey Marketplace and Octopart, with the product categorized as an Audio Special Purpose device in the Audio ICs family. The verified distributor information identifies WM8144CCPT as an active part available for sourcing, but the supplied records do not provide a verified package, pin count, electrical ratings, or detailed functional specifications. The searchable part number and category indicate a dedicated audio signal-processing role rather than a general-purpose logic or power component. Engineers should obtain the manufacturer datasheet and confirm the exact land pattern before committing a replacement to an existing PCB. An audio-channel IC is a specialized integrated circuit that handles one or more functions within an audio signal chain, such as conditioning, conversion, channel selection, or control. These devices sit between audio sources and downstream amplifiers, converters, microphones, speakers, or digital audio processors. Their performance requirements commonly include low signal distortion, stable channel behavior, compatible logic levels, and electrical characteristics matched to the intended audio architecture. Because the verified WM8144CCPT records provide only the part identity and broad category, device-specific claims should not be inferred without the original Wolfson Microelectronics or Texas Instruments documentation. The visible sourcing records support three practical points about WM8144CCPT. DigiKey Marketplace labels it as an audio channel from Texas Instruments, Octopart lists it as an integrated circuit for audio special purposes, and Rochester Electronics distribution data reports active production status. The supplied pricing excerpt gives a starting unit price of $4.07 at one-unit quantity and mentions volume discounts at 10, 100, 500, and 1,000 units. Availability language differs among marketplaces, so a purchase decision should use a current authorized-distributor quote and manufacturer inventory confirmation. WM8144CCPT is most relevant to legacy or industrial audio platforms in which the original circuit was designed around this exact device. In such systems, preserving the original device is generally safer than selecting a generic audio IC with similar nominal functionality. Any substitute must be checked for exact package dimensions, lead pitch, exposed-pad requirements, pin assignments, supply voltage, clocking, control interface, analog performance, and lifecycle status. The verified information identifies Rochester Electronics as the source of the distributed WM8144CCPT offer, so procurement documentation should also confirm the original manufacturer and authorized sourcing chain. The key engineering constraint is that the available verified data is incomplete. Mounting type, operating-temperature range, package case, absolute maximum ratings, supply voltage, channel count, resolution, interface type, and pin assignments are not stated in the supplied records. These values must be read from the applicable manufacturer datasheet before schematic capture, footprint selection, or production release. This prevents the mistake of treating a distributor category label as a substitute for full electrical and mechanical documentation. A sound sourcing workflow is to compare the distributor listing, Rochester Electronics product record, and Octopart cross-reference data against the original system documentation. Confirm that the ordered suffix CCPT matches the required package and ordering configuration, then request current stock and traceable shipment details. For repair and redesign programs, also inspect the board assembly records for markings or bill-of-material entries that may reveal the original manufacturer designation. This page consolidates the verified sourcing status, pricing basis, category placement, and data gaps for WM8144CCPT while avoiding unsupported electrical claims. It is intended to support initial part identification and procurement research, not to replace the manufacturer datasheet, reference schematic, or board-level compatibility checklist.
WM8281ECS/R - Low-Power Smart Audio Codec | Cirrus Logic
The Cirrus Logic WM8281ECS/R is a low-power smart audio codec with programmable DSP processing, acoustic echo cancellation, and ambient noise cancellation in a 138-W-CSP package measuring 5.86 mm by 4.56 mm. It provides a 24-bit audio interface using SLIMbus and is identified by distributor data as integrating 6 ADC and 8 DAC channels. An audio codec is an integrated circuit that converts analog microphone or line-level signals into digital audio data while converting digital playback streams back into analog audio outputs. The WM8281 belongs to the broader smart-codec hierarchy, combining a conventional audio codec with embedded DSP functions. This integration allows a host processor to handle system control while dedicated hardware executes noise reduction, echo cancellation, speech enhancement, and advanced media processing. Key product features include programmable DSP cores supporting multi-microphone wideband noise reduction, acoustic echo cancellation, speech enhancement, and advanced media enhancement. The 24-bit SLIMbus interface supports connected audio systems, while the integrated ADC and DAC channels reduce the external analog circuitry required for voice and multimedia products. Its low-power design is intended to benefit always-listening and portable audio equipment where continuous processing must remain energy efficient. The WM8281 architecture separates audio conversion from programmable signal processing. SLIMbus provides a shared serial link between the codec and a host or audio processor, while the DSP feature set performs real-time voice enhancement. This combination can shorten signal paths and reduce system complexity in applications requiring microphone capture, voice processing, and audio playback through a common codec package. Typical uses include smartphone and tablet voice-calling systems, headset and wearable audio platforms, smart speakers, teleconferencing equipment, voice-user-interface products, and connected consumer devices. Cirrus Logic markets the device as a low-power smart codec with echo cancellation, making it especially relevant to designs handling near-field or far-field speech where acoustic feedback and ambient noise reduce intelligibility. Designers should treat the 138-ball wafer-level chip-scale package as a layout-intensive component and follow the manufacturer's recommended land pattern, exposed-pad, power, ground, and high-speed routing guidance. The analog and digital power domains, microphone inputs, codec outputs, and SLIMbus signals must be planned together because power sequencing, decoupling, and acoustic layout can materially affect performance. This page consolidates verified manufacturer and distributor information about the WM8281ECS/R, identifies the missing technical fields explicitly, and provides application-focused selection guidance without presenting unverified electrical values, pin assignments, pricing, or drop-in replacements as confirmed facts.
WM8350GEB/RV Stereo Audio Codec with Power Management | Cirrus
The Cirrus Logic WM8350GEB/RV is a stereo audio codec with integrated power management, featuring two ADCs, two DACs, 24-bit audio processing, and operation up to 48 kHz. The device is housed in a 129-ball BGA package measuring 7 mm by 7 mm and combines an integrated audio codec with a complete set of system supply rails. An audio codec converts between digital audio data and analog microphone, line, headphone, or speaker signals. The WM8350GEB/RV belongs to the broader audio interface IC hierarchy, combining signal conversion, digital audio control, and multi-rail power management in one package. This integration can reduce the number of external regulators and supporting components required in portable audio equipment while centralizing power sequencing and system control. The WM8350GEB/RV includes six programmable DC-DC converters, four low-dropout regulators, and a current-limit switch. These rails can supply the integrated codec, off-chip digital core and I/O circuits, and LED lighting functions. A separate on-chip regulator maintains backup power for always-on system functions. The combination of programmable supply rails and stereo conversion makes the part suitable for audio platforms requiring several voltage domains. Technical operation is divided between the audio signal path and the power-management subsystem. The stereo codec supports 2 ADC and 2 DAC channels with 24-bit resolution and a 48 kHz sample-rate capability. Meanwhile, the six DC-DC converters and four LDOs provide adjustable or dedicated voltages where required by the host processor, I/O circuitry, audio paths, and illumination loads. Exact converter ratings, output-current limits, and audio performance metrics should be confirmed in the manufacturer datasheet before a production design is released. Typical end products include portable media players, personal audio devices, smartphone and tablet accessories, connected audio equipment, and other embedded systems that combine digital processing with analog audio I/O. Its integrated power tree is particularly useful where designers want to reduce board area without eliminating the separate voltage domains required by a complex audio subsystem. Layout is critical because the device combines a fine-pitch BGA package, sensitive analog audio paths, and multiple switching supply rails. Place the decoupling capacitors and analog input or output components according to the datasheet reference layout, maintain short return paths, and isolate converter switching nodes from microphone and line-level inputs. Confirm exposed-pad, ball, and thermal requirements against the package drawing before layout release. This product page consolidates the WM8350GEB/RV functional overview, package information, sourcing guidance, and verified drop-in cross-reference into an engineering-oriented reference. It also highlights the limits of direct replacement: the available WM8350GEB/V matches the package and functional description, but detailed electrical, firmware, and lifecycle equivalence should still be confirmed before substitution.
WM8350GEB/V 12-Bit Audio Codec | Cirrus Logic | Power Management
Cirrus Logic WM8350GEB/V is a 12-bit stereo audio interface with integrated power management, operating at 48 kHz and supplied in a 129-BGA package measuring 7 x 7 mm. The device combines two ADC and two DAC channels, according to the verified distributor and cross-reference records, making it suitable for compact audio subsystems that need conversion and regulated power support in one package. Its BGA construction supports dense PCB layouts but requires careful ball-layout inspection, assembly-process control, and thermal verification. An audio codec is a mixed-signal semiconductor that converts digital audio samples into analog signals and analog sound signals into digital data. A stereo codec therefore normally handles left and right playback and recording paths. As an integrated circuit combining audio conversion with power management, the WM8350GEB/V belongs to the broader semiconductor and audio-interface hierarchy rather than being a simple analog amplifier or passive audio component. The verified product information identifies the WM8350GEB/V as a 12-bit audio interface operating at 48 kHz. Its 129-BGA, 7 x 7 mm package is a principal selection constraint because pin-compatible alternatives must reproduce the same ball layout, exposed features, and board-level connectivity. The listed package also requires land-pattern and assembly inspection that cannot be completed from a distributor category listing alone. Detailed electrical limits, clock requirements, analog performance, power-rail values, and ball functions must be confirmed in the manufacturer datasheet before schematic or PCB release. The integrated power-management function can simplify the architecture of portable and embedded audio products by placing conversion and rail support in one device. This integration may reduce the number of external supporting components when the application uses the complete WM8350 audio subsystem. The tradeoff is that its 129-ball package is less straightforward to hand-solder and more dependent on advanced assembly capability than a leaded or small-outline package. Designers should also validate startup sequencing, analog grounding, clocking, and codec-to-host interface timing against the intended system architecture. Typical uses include portable media devices, smart displays, connected audio products, communication terminals, and embedded systems requiring stereo recording and playback. In these applications, the 48 kHz sampling rate supports conventional digital-audio workflows, while the 12-bit resolution defines the converter word length represented by the verified listing. System-level audio quality still depends on microphone conditioning, amplifier selection, clock jitter, analog layout, grounding, and power-supply implementation; the codec alone does not determine the final acoustic performance. Before design-in, engineers should obtain the official WM8350 datasheet and verify the complete 129-ball pin map, recommended decoupling, supported clock modes, host interface, analog input and output limits, and absolute maximum ratings. The verified distributor record labels the part as an audio interface and 12-bit codec, but it does not provide those implementation details. PCB designers should use the manufacturer land pattern rather than deriving it from package dimensions, and assemblers should confirm whether the selected BGA assembly process supports the device's ball pitch and thermal requirements. This page consolidates verified distributor identification, package constraints, cross-reference evidence, procurement questions, and application guidance that a basic catalog result does not provide. It also distinguishes verified facts from parameters requiring datasheet confirmation, helping engineers decide whether the WM8350GEB/V fits their PCB before committing to a 129-BGA design.
WM8510GEDS/RV - Mono 24-Bit Audio Codec | Cirrus Logic
The Cirrus Logic WM8510GEDS/RV is a mono audio codec with an integrated speaker driver, a 24-bit serial audio interface, and a 28-pin SSOP package. The device operates from a 2.5 V to 3.6 V supply and is intended for space-constrained consumer audio systems requiring digital-to-analog conversion and direct speaker output. Its operating temperature range is -40 °C to +85 °C, and the /RV ordering code identifies the specified surface-mount package variant. An audio codec is an interface IC that converts digital audio data into an analog output and, where supported, manages the electrical interface to an audio transducer. The WM8510 belongs to the broader codec, audio interface, signal-conversion, and semiconductor hierarchy. Integrating a mono codec and speaker driver into one package reduces the component count in portable equipment while keeping the analog output path close to the digital audio source. The WM8510GEDS/RV provides a 24-bit serial audio path, mono signal processing, and an integrated speaker-driver function in a 28-SSOP package. Its 2.5 V to 3.6 V supply range is suitable for low-voltage portable systems, while its surface-mount SSOP construction supports automated assembly. The manufacturer identifies the part as RoHS compliant, supporting use in modern electronics manufacturing where restricted-substance requirements apply to the bill of materials. The codec uses a sigma-delta architecture, a design commonly used to implement high-resolution audio conversion with integrated digital filtering. Serial audio data is transferred through a compact digital interface before being converted for the analog audio output. The integrated speaker driver allows the device to serve as the central audio-output block in products where a dedicated external speaker amplifier would add cost, board area, or complexity. Exact clock, conversion-rate, output-level, and speaker-load limits should be confirmed in the manufacturer datasheet before final circuit design. Typical applications include portable media players, personal audio equipment, compact consumer appliances, voice-accessory systems, and other products with a mono audio-speaker requirement. Its 28-pin SSOP package is especially relevant where the available PCB area is limited but a through-hole solution would be undesirable. The -40 °C to +85 °C range covers industrial-temperature consumer and embedded product environments when all associated system requirements are met. Designers should confirm the supported sample rate, master-clock requirement, digital audio format, speaker impedance, power-supply sequencing, and decoupling network against the manufacturer datasheet. PCB layout should keep analog output and speaker-driver connections away from digital clock and data traces, while preserving a direct ground-return path from the device to its supply system. This page combines package, interface, environmental, and application details with replacement guidance and practical design considerations.
WM8510GEDS/V - 24-Bit Mono Audio Codec | Cirrus Logic
The Wolfson Microelectronics WM8510GEDS/V is a low-power, high-quality mono audio codec with an integrated speaker driver and 24-bit serial audio interface, supplied in a 28-pin SSOP package. The device is designed for Voice over Internet Protocol equipment and digital telephones, where its integrated signal-processing and output-driver functions reduce the number of external components required for a complete voice-audio path. An audio codec is an interface IC that converts digital audio data into an analog signal and manages the associated input, output, filtering, and gain functions. The WM8510GEDS/V belongs to the mono-codec family within the broader audio IC hierarchy, combining a digital audio interface, analog conversion functions, and speaker-drive capability. This integration is especially useful in compact voice terminals where board area, power consumption, and external component count are important design constraints. The WM8510GEDS/V uses a 24-bit serial interface and provides a mono codec with a speaker driver. Its -40°C to +85°C operating-temperature range supports industrial, communications, and temperature-controlled consumer equipment. The low-power design is intended for portable and always-connected voice products, while the integrated speaker driver can reduce the footprint required for a basic voice-output stage compared with a codec that requires a separate output amplifier. The device is intended primarily for VoIP telephones, digital telephones, and related voice-communication terminals. In these systems, the digital audio processor receives voice data through its serial interface, processes and converts the signal, and provides an analog output suitable for driving an audio transducer through the integrated speaker-driver section. This integration can simplify signal routing and reduce component count compared with a discrete codec-and-amplifier implementation. The 28-pin SSOP package provides a practical option for compact, cost-sensitive voice products. Because it is a relatively small-outline package, careful PCB layout is needed to provide adequate copper for power delivery and thermal dissipation. Decoupling capacitors should be placed close to the supply and ground pins, while output and interface routing should be kept separate from sensitive analog sections where practical. Designers should confirm the exact clocking, digital-interface voltage, analog supply arrangement, output-load limits, and external-component requirements in the manufacturer datasheet before releasing a PCB. The device is listed as obsolete, so new production designs should include a documented lifecycle review and an approved sourcing or redesign plan rather than assuming long-term availability. This product page combines the verified device identity, package information, lifecycle status, technical-search references, and practical integration considerations in one engineering-focused summary. It also separates true drop-in candidates from parts that are merely functionally similar, helping designers make a safer replacement decision.