بەرهەمەکان (970+)

MC1455BD - 5V Programmable Timer/Oscillator | onsemi
MC1455BD

MC1455BD - 5V Programmable Timer/Oscillator | onsemi

The onsemi MC1455BD is a single 555-type timer and oscillator integrated circuit designed for accurate time delays and free-running oscillation. It operates from a 5 V supply and is packaged in an 8-pin SOIC. The MC1455BD combines a precision timing circuit with trigger and reset inputs, allowing it to be configured as a monostable one-shot or an astable oscillator using external resistors and capacitors. A 555 timer is a type of programmable timer and oscillator within the broader clock and timing IC hierarchy. Its internal comparators, flip-flop, and discharge transistor allow a simple external RC network to determine delay time or oscillation frequency. Compared with a mechanical or discrete timing arrangement, the MC1455BD provides a compact and repeatable implementation for pulse generation, delay, flashing, and periodic control functions. Key features include support for both monostable and astable operating modes, externally adjustable timing through one resistor and one capacitor in monostable operation, and separate trigger and reset terminals. The verified distributor information identifies the device as a 5 V, 555 Type, Timer/Oscillator (Single) IC in an 8-SOIC package. The onsemi datasheet also describes additional terminals for triggering or resetting when required. The MC1455 architecture provides two useful operating behaviors. In monostable mode, a trigger pulse causes the output to enter a defined high state for a duration set primarily by the external timing resistor and capacitor. In astable mode, the output repeatedly switches between high and low states, with the external resistor-capacitor network setting the operating frequency and duty cycle. This makes one device suitable for both one-shot event timing and continuous pulse generation. Typical applications include industrial control timers, LED flashers, pulse generators, delay circuits, repetitive switching circuits, and general-purpose timing modules. Its 8-pin SOIC package supports compact surface-mount PCB layouts, while the external RC components allow timing values to be selected for the particular load and system requirements. The device is also useful as the timing element in educational and prototype circuits where both monostable and astable configurations may be exercised. Designers should select resistor and capacitor values that keep the timing network within the operating limits stated by the manufacturer datasheet and should account for component tolerance when precise timing is required. The trigger and reset pins must be driven only to valid logic levels, and unused or unused-at-a-time inputs should be handled according to the datasheet rather than left floating. PCB layout should keep timing-node connections short and provide an adequate ground return. This page combines verified manufacturer and distributor information, package and pin references, commercial availability, and qualified drop-in alternatives. It also provides application guidance and parameter-level comparison information intended to make timer selection and PCB reuse easier than a raw datasheet summary alone.

RFQ پەیوەندی
MC1455BP1G - 5/15V Single Timer | onsemi | DIP-8
MC1455BP1G

MC1455BP1G - 5/15V Single Timer | onsemi | DIP-8

The onsemi MC1455BP1G is a single 555-type timer and oscillator integrated circuit designed for 5 V and 15 V power supplies in an 8-pin PDIP package. It supports monostable time-delay, astable oscillation, and trigger or reset operation, with timing controlled by one external resistor and one capacitor. The device operates from -40°C to +85°C and is supplied in a tube. A monolithic timer is a timing circuit that switches its output after a defined interval. The MC1455 family belongs to the timer and oscillator hierarchy within analog integrated circuits, combining a resistor-controlled timing network with an internal threshold comparator, trigger comparator, output latch, and discharge transistor. In astable mode, the output repeatedly charges and discharges an external capacitor; in monostable mode, one trigger event produces a single timed output pulse. The MC1455BP1G supports supply voltages of 5 V and 15 V and provides separate trigger and reset terminals when those functions are needed. Its resistor-and-capacitor timing architecture allows the delay or oscillation frequency to be established with external components rather than an internal clock. This makes the device suitable for repeatable pulse generation, delay stages, tone generation, and periodic control functions. The circuit combines analog timing thresholds with a logic-level output stage. During astable operation, the external capacitor voltage moves between the internal reference thresholds while the discharge transistor controls the resistor path. The resulting oscillation frequency and duty cycle depend on the selected resistance and capacitance values, so component tolerance directly affects timing accuracy. Monostable operation uses one triggering transition to initiate a single output pulse whose duration is controlled by one timing resistor and capacitor. Typical applications include industrial pulse and delay circuits, oscillator modules, indicator flashing, periodic actuator control, signal-processing test equipment, and educational timer demonstrations. The -40°C to +85°C operating range supports industrial equipment, while the through-hole PDIP package simplifies hand assembly, prototyping, socketed construction, and replacement in legacy designs. Designers should treat the trigger and reset inputs carefully because they influence internal state even when those functions are not used. Verify threshold and discharge-pin behavior against the manufacturer datasheet, maintain stable timing-component tolerances, and provide adequate decoupling between the supply pins and ground. The 5 V and 15 V supply designations should not be treated as a continuous operating range between those points without consulting the device limits. This product record combines the manufacturer timing-circuit description with package, temperature, supply-voltage, and commercial information to support engineering selection. It also provides same-footprint replacement guidance, application-specific design considerations, and a parameter comparison intended to make PCB reuse decisions more transparent.

RFQ پەیوەندی
MC1455DG - Single 555 Timer, 16V, 8-SOIC | onsemi
MC1455DG

MC1455DG - Single 555 Timer, 16V, 8-SOIC | onsemi

The onsemi MC1455DG is a single general-purpose 555 timer integrated circuit with a 4.5 V to 16 V supply range, housed in an 8-pin SOIC package. It can generate accurate time delays or free-running oscillations using external resistors and capacitors, while dedicated trigger and reset terminals provide additional control over the timing interval. The device is intended for precision delay, pulse-generation, and oscillator applications in industrial and commercial electronics. A 555 timer is an analog timing integrated circuit that combines a voltage comparator, a flip-flop, discharge transistor, and resistive divider into one reusable building block. Within the broader hierarchy, it is a clock and timing IC within integrated circuits, providing a simple alternative to a dedicated programmable timer or microcontroller-based timing solution. The MC1455 can operate as a monostable one-shot, as an astable oscillator, or as a Schmitt-trigger comparator. The MC1455DG provides a single timer in an 8-SOIC package, operates from 4.5 V to 16 V, and is specified for a 0°C to 70°C temperature range. In monostable mode, one external resistor and one capacitor control the output pulse duration. In astable mode, two resistors and one capacitor establish the oscillation frequency and duty cycle, while the control, trigger, reset, threshold, and discharge pins support the standard 555 application topology. Timing accuracy depends on the external resistor and capacitor tolerances, the device's internal reference behavior, and the operating voltage. Because the trigger input is compared against one-third of the supply voltage and the threshold input is compared against two-thirds of the supply voltage, the timing network sees supply-dependent reference levels. Designers should therefore use stable precision components and avoid high-impedance timing nodes where practical. Typical uses include industrial control pulse generation, relay activation delays, debounce timers, low-frequency oscillators, sensor timeout circuits, and audio-envelope generators. It is also useful in educational and evaluation boards where a simple external-resistor-and-capacitor timing method is preferable to firmware-based timing. For robust layouts, connect the control bypass capacitor close to the control pin, keep the timing capacitor's ground return short, and route the discharge transistor output away from sensitive analog signals. Confirm trigger and reset levels in the selected operating mode because a floating control, trigger, or reset node can produce unintended output transitions. This page combines verified manufacturer and distributor information with pin-level guidance, application fit, comparison parameters, and replacement considerations. It also documents where full electrical limits, qualified pricing, and lifecycle-specific details remain unavailable in the supplied source data.

RFQ پەیوەندی
MC1455DR2 - Programmable Timer Oscillator | onsemi
MC1455DR2

MC1455DR2 - Programmable Timer Oscillator | onsemi

The onsemi MC1455DR2 is a single 555-type monolithic timing circuit packaged in an 8-pin SOIC. Designed for accurate time delays or oscillation, it supports time-delay operation controlled by an external resistor-capacitor network and provides trigger and reset terminals. The device is described as a direct replacement for NE555 timers and includes adjustable duty-cycle capability. A timer IC is a specialized timing-control device used to create a defined delay, periodic oscillation, or a repeatable pulse sequence. The MC1455 belongs to the 555 timer family, combining analog threshold comparison and switching functions with external timing components. Within the broader semiconductor hierarchy, it is an integrated circuit, timer and oscillator, and ultimately a signal-generation and control component used in industrial, consumer, and instrumentation electronics. The principal functional characteristics are accurate timing, selectable monostable or astable operating behavior, external resistor-capacitor timing control, trigger support, reset support, and adjustable duty cycle. Its timing network remains external, allowing the designer to select resistance and capacitance values according to the required delay or oscillation frequency. The 8-pin SOIC package also supports compact surface-mount PCB construction while exposing the standard timer functions required for trigger, discharge, control, threshold, reset, output, supply, and ground connections. Technically, the MC1455 combines two internal threshold comparators with a flip-flop and discharge transistor. In time-delay mode, the trigger input initiates a timing interval that is controlled by one external resistor and capacitor. In oscillation mode, the threshold and trigger functions cooperate with the external network to produce a periodic output. Additional trigger and reset terminals provide external control, while the control-voltage terminal supports common waveform-shaping and duty-cycle adjustment techniques described in the manufacturer documentation. Typical uses include pulse generation, delayed switching, debounce and one-shot logic, simple clock circuits, tone generation, warning indicators, and control-signal generation. The part is especially appropriate where a compact, standard 555-type interface is preferred over a more complex microcontroller timer or dedicated clock IC. Its external timing network also allows the timing range to be scaled without changing the package or pinout. The principal design consideration is to use the pin-description table and operating limits in the manufacturer datasheet when assigning signal levels, timing-component values, supply conditions, and output drive requirements. Designers should also review the reset and trigger truth behavior, control-voltage biasing, and discharge-node implementation before placing the circuit in a new PCB design. This page organizes the verified MC1455DR2 product information, commercial inquiry path, drop-in alternatives, pin assignment, comparison points, and practical application guidance. It also distinguishes verified package and interface facts from parameters that require confirmation against the manufacturer datasheet before production release.

RFQ پەیوەندی
MC1455DR2G - 4.5-16V Precision Timer Oscillator | onsemi
MC1455DR2G

MC1455DR2G - 4.5-16V Precision Timer Oscillator | onsemi

The onsemi MC1455DR2G is a precision monolithic timer integrated circuit for monostable timing, astable oscillation, pulse shaping, and delay applications. It operates from 4.5 V to 16 V, supports timing intervals from microseconds to hours, and is housed in an 8-pin SOIC package. The device provides trigger and reset terminals in addition to its standard 555 timer functions, allowing external control of timing events. A monolithic timer is an analog timing IC that compares an externally generated voltage with a threshold voltage to control an internal switch. In a 555-family timer, the category hierarchy extends from timer IC to clock and timing IC to analog and mixed-signal semiconductor. The MC1455DR2G can operate as a one-shot monostable circuit, where an external resistor and capacitor set the output pulse width, or as a free-running astable oscillator, where two resistors and one capacitor establish frequency and duty cycle. The MC1455DR2G offers adjustable duty cycle and direct replacement capability for standard NE555 timer circuits. Its trigger and reset inputs support external timing control, while the output stage produces a timing pulse suitable for driving indicator, control, or driver stages. Its 4.5 V to 16 V operating range covers conventional 5 V, 12 V, and 15 V industrial control environments when the timing network and load current are selected appropriately. Internally, the device uses resistor-comparator reference elements, a discharge transistor, and a flip-flop to control the output stage. In astable operation, the timing capacitor charges and discharges between the device's internal trigger and threshold levels. In monostable operation, the trigger input initiates a fixed output pulse determined primarily by one timing resistor and one timing capacitor. These internal functions make the circuit useful wherever a simple, reliable, externally adjustable time base is required. Typical applications include industrial control timers, LED and lamp flashers, pulse generators, debounce circuits, waveform converters, delay stages in test equipment, and audio or modulation tone generators. The trigger terminal also allows the timer to be synchronized by an external event, while the reset terminal provides direct interruption of an active timing cycle. When laying out a timing circuit, place the timing resistor and capacitor close to their associated IC pins to reduce parasitic pickup and timing error. Confirm trigger and reset levels against the external driving circuit, and size the discharge path for the maximum timing-capacitor voltage. Decoupling close to the supply pins is essential when the load produces switching transients. This page combines manufacturer timing characteristics, distributor package information, cross-reference candidates, and practical design guidance. It helps engineers identify pin-compatible options, evaluate the 8-SOIC footprint, and plan monostable or astable implementations without relying only on a distributor catalog listing.

RFQ پەیوەندی
MC1455P1G - 555 Timer, 4.5-16V, 8-PDIP | onsemi
MC1455P1G

MC1455P1G - 555 Timer, 4.5-16V, 8-PDIP | onsemi

The onsemi MC1455P1G is a 555-type monolithic timer and oscillator with a 4.5 V to 16 V supply range, housed in an 8-pin PDIP package. It supports accurate time-delay and free-running oscillation functions, with external resistor and capacitor timing components and adjustable duty-cycle operation. Trigger and reset terminals allow the circuit to be initiated or terminated according to the application timing requirements. A 555 timer is a type of timer IC, oscillator IC, and analog integrated circuit used to generate a time-delayed output or periodic waveform without a microprocessor. Within the broader semiconductor hierarchy, the MC1455 belongs to the timer and oscillator category, which sits within clock and timing integrated circuits and analog signal-processing devices. The device provides a simple hardware mechanism for delays, pulse generation, flashing, tone generation, and periodic control. The principal advantages of the MC1455P1G include its direct-replacement positioning for NE555 timers, adjustable duty-cycle capability, separate trigger and reset control, and operation from a single 4.5 V to 16 V supply. Its timing interval is established by one external resistor and capacitor in monostable mode, while astable operation adds the resistor and capacitor connections required to set frequency and duty cycle. These features make the circuit useful in designs where a dedicated timer simplifies control logic. Internally, the MC1455 uses comparator and switching functions to control its discharge, output, trigger, and reset behavior. In monostable operation, a trigger pulse starts one controlled timing interval and then returns the output to its inactive state. In astable operation, the output oscillates continuously, with frequency and duty cycle determined by the external timing network. The manufacturer describes the MC1455 as a highly stable monolithic timing controller, while its trigger and reset terminals support externally controlled operation. Typical uses include LED flashers, interval timers, pulse generators, industrial control timers, switch debounce circuits, simple audio oscillators, and embedded control systems requiring a repeatable hardware timing event. Because the MC1455P1G is a through-hole PDIP device, it is particularly suitable for prototyping, educational assemblies, legacy industrial equipment, and repair designs where a socketed DIP implementation simplifies maintenance. For new layouts, preserve the standard 8-pin timer interface and place timing components close to the relevant pins to reduce parasitic effects. Check trigger and reset pulse timing, discharge-device current, and output-load conditions before finalizing the circuit. A bypass capacitor near the supply pin is recommended when the long timing interval and high timing accuracy required by the design are important. This product record combines manufacturer functional information, package and supply details, cross-reference candidates, and practical design guidance. It also distinguishes verified device attributes from electrical parameters that still require confirmation in the manufacturer datasheet, helping engineers plan a replacement without overlooking timer behavior, package compatibility, or application-level constraints.

RFQ پەیوەندی
MC1648M - Voltage-Controlled Oscillator | Motorola
MC1648M

MC1648M - Voltage-Controlled Oscillator | Motorola

The Motorola MC1648M is a voltage-controlled oscillator designed for frequency synthesis, modulation, and signal-generation applications. According to the available Motorola MC1648 documentation, the device requires an external parallel tank circuit consisting of an inductor and capacitor; maximum performance is obtained with QL greater than or equal to 100 at the operating frequency. A varactor diode may be placed in the tank circuit to provide a voltage-variable input for voltage-controlled oscillator operation. A voltage-controlled oscillator, or VCO, generates an output signal whose frequency varies with an applied control voltage. The MC1648 belongs to the broader clock and timing IC family, where it provides a tunable oscillator rather than a fixed-frequency clock. Its external tank circuit allows the designer to select inductance and capacitance for the target operating range, while the control voltage provides fine frequency adjustment. This architecture is useful in FM transmitters, frequency synthesizers, clock-generation circuits, and frequency-discriminator systems. The main verified technical characteristics are its external parallel LC-tank requirement and the recommended tank quality factor of QL at least 100 for maximum performance. The device also supports voltage-variable operation when a varactor diode is incorporated into the tank circuit. The supplied search results identify MC1648M as a Motorola voltage-controlled oscillator and associate it with a DIP-style MC1648 package family, but the detailed electrical ratings, frequency limits, supply voltage, output characteristics, pin names, and package dimensions were not included in the verified dataset. For design implementation, the external tank components should be placed close to the oscillator pins and selected for the intended frequency range. Component tolerance, parasitic capacitance, and inductor Q can shift the operating frequency. The control-voltage range and permitted control-voltage slew rate should be verified in the manufacturer datasheet before relying on the part for precision frequency control. Typical uses include FM radio modulation, tone generation, frequency conversion, and tunable clock sources. The MC1648M is most appropriate when an external LC network and application-specific frequency calibration are acceptable. Modern designs may instead choose a higher-integration oscillator when smaller size, digital calibration, or a specified phase-noise performance is required. This page combines the verified Motorola MC1648 tank-circuit requirements, distributor availability information, pricing context, and practical selection guidance. The verified distributor listing shows MC1648M in stock at LCSC with a starting price of $1.0043. Pricing and inventory should be checked with the authorized supplier before purchase, especially because legacy semiconductor availability can vary by package, region, and production status.

RFQ پەیوەندی
MC6840CFN-G Programmable Timer Module | Rochester Electronics
MC6840CFN-G

MC6840CFN-G Programmable Timer Module | Rochester Electronics

The Rochester Electronics, LLC MC6840CFN-G is a programmable timer module, also identified in the verified distributor data as an MC6840 PTM, supplied in the CFN package designation. The available distributor listing identifies the device under the Clock/Timing and Programmable Timers and Oscillators categories, confirming its role as a timing IC rather than a general-purpose logic, memory, or communications component. Its verified marketplace price starts at $22.3619 as of 2026-10-28, while distributor inventory is also advertised across several authorized or aftermarket channels. A programmable timer module is a clock-and-timing integrated circuit used to generate, divide, count, or measure timing intervals according to externally applied control and reference signals. The MC6840 family designation identifies the product as a timer rather than an oscillator, although programmable timers are commonly paired with external clock sources, counters, and digital control logic. Because the supplied web results do not expose a verified manufacturer datasheet or detailed electrical tables, this page avoids assigning unverified clock frequencies, counter ranges, supply voltages, or timing tolerances. The MC6840CFN-G is especially relevant to legacy industrial, control, and embedded-system designs that use the MC6840 interface and require an authorized replacement source. Its availability through Rochester Electronics and listed distributors makes it useful for repair, continuation, and lifecycle-extension programs. One distributor listing reports 6240 pieces in stock, another reports 9160 pieces, and LCSC describes the component as in stock. These inventories are commercial snapshots and can change independently. The exact CFN package dimensions, pin count, exposed-pad configuration, operating-temperature range, and environmental ratings are not present in the supplied verified data. Engineers should therefore download the original MC6840 manufacturer documentation or request the Rochester Electronics datasheet before approving a new design. Pin assignment, voltage limits, timing-edge behavior, and interface levels must be checked against the original system rather than inferred from the orderable suffix. Typical uses include legacy digital control systems, event-counting modules, pulse-timing circuits, and equipment where an MC6840-compatible timer is already designed into the PCB. In maintenance applications, the safest replacement strategy is to preserve the existing footprint and verify every electrical characteristic. For new designs, evaluate a currently supported timer IC when long-term availability matters, but retain the MC6840CFN-G when preserving an old control platform is more important than modernization. This page consolidates verified distributor pricing, inventory observations, source links, sourcing guidance, and data gaps for the MC6840CFN-G. It deliberately separates confirmed marketplace facts from unverified technical assumptions, giving engineers a more reliable basis for legacy-component procurement and replacement planning.

RFQ پەیوەندی
MC6840CP-G - 3-Channel Programmable Timer | Rochester
MC6840CP-G

MC6840CP-G - 3-Channel Programmable Timer | Rochester

The Rochester Electronics, LLC MC6840CP-G is a programmable timer module associated with the Motorola M6800 processor family. The device provides three independent 16-bit binary counters, three corresponding control registers, and a status register for generating and monitoring variable system time intervals. It is intended for legacy M6800-family systems that require programmable interval timing, event counting, or periodic interrupt generation. The supplied source data identifies the device as an integrated circuit from Rochester Electronics, LLC and lists it as active. A programmable timer module is a timing IC that combines hardware counters with processor-accessible control and status registers. Within the hierarchy of timing and clock ICs, it sits below general-purpose clock and timer devices and provides a specialized timing subsystem for a processor bus. The MC6840 architecture allows software to program timing behavior instead of relying on fixed-delay logic or separate discrete counters. The primary architectural feature is the bank of three 16-bit binary counters. Each counter has a corresponding control register, while the status register reports timer-related conditions to the host processor. This organization supports multiple independently configured timing events in one device, reducing the number of external timing components needed by an M6800-family controller. The verified source data does not provide operating voltage, clock frequency, output waveform, maximum count rate, package dimensions, temperature range, or absolute maximum ratings. Typical legacy applications include industrial controller timing, data-acquisition sequencing, periodic service routines, programmable pulse generation, and event counting. In these systems, the timer module can provide repeatable time bases or interrupt requests, allowing the processor to divide software workload without implementing multiple independent counters in firmware. Because this is a legacy M6800-family component, system integration may also depend on processor-specific bus behavior and legacy development tooling. Before designing a new board around the MC6840CP-G, engineers should obtain the complete Motorola MC6840CP datasheet and verify the processor interface, counter mode behavior, timing limits, and package-level pin assignments. The supplied distributor records confirm the product and its programmable timer function but do not establish a complete electrical specification table or a verified replacement list. This product page combines the verified programmable-counter architecture, current distributor references, available pricing information, and practical sourcing guidance. It also distinguishes documented facts from parameters that still require confirmation from the original manufacturer datasheet, helping engineers assess the legacy timer module without inventing electrical, timing, or package data.

RFQ پەیوەندی
MCP79410-I/MS - I2C RTC with EEPROM and Battery Backup | Microchip
MCP79410-I/MS

MCP79410-I/MS - I2C RTC with EEPROM and Battery Backup | Microchip

The Microchip MCP79410-I/MS is an I2C-compatible real-time clock/calendar with 1 Kbit EEPROM, 64-byte SRAM, unique ID, and automatic battery switchover, supplied in an 8-MSOP package. It operates from 1.8 V to 5.5 V across -40°C to +85°C and uses a 32.768 kHz crystal for timekeeping. The device combines a calendar clock, configurable alarms, nonvolatile storage, and backup-power management in one compact component. A real-time clock, or RTC, is a low-power timing integrated circuit that maintains wall-clock time independently of the system processor. An RTCC extends the basic RTC function with calendar registers for seconds, minutes, hours, dates, months, and years. The MCP79410 belongs to the RTC, RTCC, clock/calendar, and timekeeping IC hierarchy and interfaces to a host through a two-wire I2C-compatible serial interface. The MCP79410 provides 1 Kbit of EEPROM for persistent configuration or event records and 64 bytes of SRAM for temporary data. Its battery-switchover circuit allows the clock and memory to remain operational from a backup source when the primary supply fails. A timestamp mechanism records the power-failure event, while digital timing compensation compensates for crystal error and improves timekeeping accuracy without relying only on fixed analog calibration. According to the manufacturer datasheet, the clock supports automatic month-length handling, leap-year correction, 24-hour or 12-hour formats, programmable alarms, and a configurable CLKOUT. The MCP79410 family also includes a power-sense function that supports automatic transition between the primary supply and backup battery. The -I/MS ordering suffix denotes the specified package and temperature treatment, while /MS identifies the MSOP package used by this MPN. Typical uses include industrial controllers, embedded instruments, data loggers, meters, medical equipment, communication modules, and consumer electronics requiring accurate time stamps. Compared with software timekeeping based on a microcontroller timer, the RTC maintains a dedicated time base across resets, sleep states, and main-power interruptions. Its I2C interface also allows firmware to read and write time and memory data efficiently. The most important design checks are the 32.768 kHz crystal network, I2C pull-up resistors, decoupling capacitors, backup-battery configuration, and VBATEN handling. Firmware must configure the relevant control registers and verify the device address before normal operation. Because clock accuracy depends on the crystal and its load network, PCB placement and grounding should follow the manufacturer's recommended layout guidance. This product page combines verified distributor information, manufacturer technical facts, application guidance, and design considerations. It is intended to help engineers evaluate the MCP79410-I/MS for compact, battery-backed real-time clock and calendar designs, including comparisons, procurement questions, firmware considerations, and practical integration advice.

RFQ پەیوەندی
MCP79510T-I/MS - SPI RTCC 1Kb EE 64B SRAM | Microchip
MCP79510T-I/MS

MCP79510T-I/MS - SPI RTCC 1Kb EE 64B SRAM | Microchip

The Microchip Technology MCP79510T-I/MS is a 10-pin MSOP SPI Real-Time Clock/Calendar (RTCC) with 1 Kbit EEPROM and 64 bytes battery-backed SRAM, designed for low-power timekeeping in embedded systems. Operating from 1.8V to 3.6V across the industrial -40C to +85C range, it integrates a digital-trimmed 32.768 kHz oscillator and battery switchover circuitry for backup power. The MCP79510T-I/MS uses a standard 4-wire SPI serial interface and is offered in a 10-MSOP (3.00 mm) surface-mount package. A Real-Time Clock (RTC) is a dedicated integrated circuit that maintains accurate time and date information independently of the host processor, typically counting seconds, minutes, hours, days, months and years. RTCs sit beneath clock & timing ICs in the broader semiconductor hierarchy: RTC -> clock & timing -> timing IC -> power management/interface IC. Battery-backed RTCs retain time during main power loss, making them essential for any system that must log events with wall-clock timestamps across power cycles. Key features of the MCP79510T-I/MS include digital trimming for improved long-term accuracy, software-controlled block write-protect for the EEPROM, a power-fail timestamp that captures the moment of main power loss, and a 64-byte SRAM that retains user data during backup. The integrated battery switchover automatically routes power from an external backup cell when VCC drops below the threshold, eliminating external MOSFETs and comparator circuits. Its event-detection input and configurable alarm provide a flexible wake-up mechanism for low-duty-cycle battery applications. The MCP79510 family shares a common register map and SPI command set across the MCP79510, MCP79511, MCP79512 and MCP79520/21/22 variants, allowing firmware reuse. The MCP79510T-I/MS is the 1 Kbit EEPROM member with 64 B SRAM, while the MCP79511/12 double the EEPROM and SRAM, and the MCP79520/21/22 add a unique 64-bit EUI-48/EUI-64 MAC ID for network-connected designs. Designers should consult the Microchip MCP79510 product page and the family datasheet (DS22078D) for the precise register differences. Typical applications include industrial data loggers, smart meters, medical monitoring devices, point-of-sale terminals, security alarm panels, and IoT edge nodes. The wide operating voltage and integrated battery switchover make the part drop-in compatible with both regulated 3.3V rails and direct Li-ion battery stacks. For designs that need higher accuracy, the digital trimming register allows sub-ppm adjustment against a known reference such as a GPS-disciplined oscillator. When designing with the MCP79510T-I/MS, place a 1 uF to 10 uF decoupling capacitor close to VCC and route the 32.768 kHz crystal traces symmetrically to minimize load-capacitance mismatch. The backup battery input should be decoupled with a small ceramic cap to absorb inrush during switchover; do not exceed the absolute maximum VCC or BAT voltage or the on-chip battery switchover circuit will be damaged.

RFQ پەیوەندی
MCP79511-I/MS - SPI RTCC, 64B SRAM, 10-MSOP | Microchip
MCP79511-I/MS

MCP79511-I/MS - SPI RTCC, 64B SRAM, 10-MSOP | Microchip

The Microchip Technology MCP79511-I/MS is a 3V SPI Battery-Backed Real-Time Clock/Calendar (RTCC) IC with 64-byte SRAM and pre-programmed EUI-48 MAC ID, housed in a 10-pin MSOP package. The device integrates a digital-trimmed timekeeper, automatic battery switchover, 64-byte battery-backed SRAM, and 2 Kbit EEPROM for non-volatile parameter storage. According to the Microchip product page, the MCP79511 SPI RTCC is highly integrated with memory and advanced features normally found in higher-priced devices. A Real-Time Clock (RTC) IC is a low-power timekeeping device that maintains accurate wall-clock time (seconds, minutes, hours, day, date, month, year) and calendar functions even when the main system is powered down. RTCs typically include a backup power input (battery or supercapacitor) to keep time during outages, and they communicate with a host microcontroller via serial interfaces such as I2C, SPI, or parallel buses. Within the broader hierarchy, an RTCC sits under Clock & Timing ICs -> Integrated Circuits, and shares architectural lineage with calendar/watchdog timers used in metering, data loggers, and secure element designs. Key features of the MCP79511-I/MS include digital trimming for high-accuracy timekeeping (typically ±5 ppm across the industrial temperature range), automatic power-switchover to a backup battery when VCC drops below threshold, two configurable interrupt outputs for alarms and watchdog functions, and a unique pre-programmed 48-bit MAC address (EUI-48) that simplifies networking product compliance. The SPI interface operates at up to 5 MHz for fast register access and supports 1-byte to 64-byte block writes to the SRAM and EEPROM. The integrated 2 Kbit EEPROM provides ample storage for application parameters, configuration data, or tamper logs. Architecturally, the MCP79511 uses a 32.768 kHz crystal oscillator input with an on-chip digital trimming DAC, allowing fine frequency adjustment to compensate for crystal tolerance and aging. The device's power-sense circuitry continuously monitors VCC and seamlessly switches to backup supply without losing time integrity, which is critical for metering, security, and IoT edge nodes. A separate backup-supply pin (VBAT) accepts 1.3V-3.6V, supporting lithium coin cells or supercapacitors. Typical applications include smart energy metering (AMI), data loggers with timestamping, industrial automation controllers requiring scheduling, security alarm panels, IoT edge nodes with secure timekeeping, and any embedded system needing persistent date/time during power cycles. The pre-programmed EUI-48 MAC ID simplifies Wi-Fi, Ethernet, or 6LoWPAN commissioning and avoids the need for external MAC address storage. When designing with the MCP79511-I/MS, place the 32.768 kHz crystal as close to the X1/X2 pins as possible and use load capacitors that match the crystal's specified load capacitance (typically 6-12.5 pF). Decouple VCC and VBAT with 100 nF ceramic capacitors to handle the automatic switchover transient and prevent register corruption. This page synthesizes Microchip datasheet specifications, distributor pricing as of 2026-10-09, verified drop-in alternatives, and practical design notes not typically assembled on a single manufacturer datasheet page.

RFQ پەیوەندی
MCP79511T-I/MS - 3V SPI RTC with EUI-48 | Microchip
MCP79511T-I/MS

MCP79511T-I/MS - 3V SPI RTC with EUI-48 | Microchip

The Microchip Technology MCP79511T-I/MS is a 3 V SPI real-time clock/calendar with 64-byte battery-backed SRAM, 1 Kbit EEPROM, and a pre-programmed EUI-48 MAC ID. Its 10-pin MSOP package supports battery switchover, digital trimming, an interrupt output, alarms, events, and a pre-programmed unique identifier. The device targets systems requiring accurate timekeeping, low-power backup, and secure network identity. What is a real-time clock/calendar? An RTC maintains time and calendar information independently of the system processor, typically from a crystal oscillator and backup supply. An SPI RTC combines that timekeeping function with a serial peripheral interface and nonvolatile storage. The MCP79511T-I/MS belongs to the RTC and clock/timing category, providing system time, retained data, and programmable events without relying entirely on a microcontroller. The MCP79511 family combines digital trimming compensation, a backup-power switchover circuit, and pre-programmed EUI-48 identification. Its integrated 64-byte battery-backed SRAM preserves frequently used configuration or counter data, while 1 Kbit EEPROM provides nonvolatile storage. The SPI interface allows the host to configure the device, read current time, program alarms and timers, and manage stored data over a compact serial connection. The MCP79511T-I/MS is designed for low-power embedded systems where accurate timekeeping and identity are important. Digital trimming supports calibration of the oscillator, while the battery switchover helps maintain operation when the primary supply is removed. The interrupt output can indicate alarms, timer events, or other programmed conditions, allowing the host processor to remain inactive until an event occurs. Typical applications include Ethernet-connected equipment requiring EUI-48 identification, industrial controllers, data-acquisition systems, network appliances, embedded instruments, and battery-backed telemetry products. The combination of RTC functionality, retained memory, EEPROM, and MAC identity can reduce the number of discrete components required in a design. Designers should verify the crystal, load capacitors, supply decoupling, and backup-battery interface against the manufacturer datasheet. Firmware must also account for the device address, register map, interrupt behavior, and any required calibration sequence. The available verified source data confirms the 3 V SPI RTCC function, 64-byte SRAM, 1 Kbit EEPROM, EUI-48 identity, and 10-MSOP package. This page consolidates manufacturer product information, distributor listings, interface details, and application guidance for engineers evaluating the MCP79511T-I/MS. Exact pricing, electrical limits, timing values, and pin assignments should be checked against the current Microchip datasheet before release to production.

RFQ پەیوەندی
MK2049-34SAI - 77.76MHz 3.3V VCXO PLL | Renesas
MK2049-34SAI

MK2049-34SAI - 77.76MHz 3.3V VCXO PLL | Renesas

The Renesas Electronics MK2049-34SAI is a 3.3 V communications clock VCXO PLL clock synthesizer with a maximum output frequency of 77.76 MHz, LVCMOS input and output interfaces, and a 20-pin SOIC package. It accepts multiple input frequencies and uses an 8 kHz clock reference to support controlled clock synthesis in communications equipment. A VCXO PLL clock synthesizer is a timing device that combines a voltage-controlled crystal oscillator with a phase-locked loop. In the broader semiconductor hierarchy, it belongs to clock and timing ICs, where a PLL synchronizes an adjustable output to a stable reference. This architecture allows a system to derive multiple or rational clock relationships while attenuating phase noise and reducing frequency variation. The MK2049-34SAI operates from a 3.15 V to 3.45 V supply, making it suitable for 3.3 V communications systems. Its listed LVCMOS interfaces support integration with digital logic, while the 77.76 MHz maximum frequency provides headroom for telecom transport, networking, and embedded communications equipment. The package is a 20-SOIC measuring 0.295 inches, or 7.50 mm, in width. The device is identified as a PLL clock synthesizer with one listed circuit and an input-to-output ratio of 1:3. The manufacturer datasheet also describes the MK2049-34A family as a dual phase-locked-loop device capable of frequency synthesis and jitter attenuation. These functions allow an external reference to establish the operating point while internal loop behavior controls the generated communication clock. Typical uses include line-card clocking, telecommunications equipment, network-interface timing, and other systems requiring a stable synthesized output from a low-frequency reference. In these applications, the 3.3 V operating range aligns with conventional communications logic, while LVCMOS signaling simplifies connection to digital clock buffers, processors, converters, and field-programmable logic. When designing the clock path, verify the reference frequency, output division or multiplication ratio, loop filtering, and external crystal requirements against the manufacturer datasheet. Keep the clock traces short and provide a clean return path, particularly when the generated signal drives high-speed digital circuitry. Decoupling and output loading also affect clock quality, so validate them against the intended operating conditions. This product page consolidates the verified electrical characteristics, package details, application guidance, sourcing paths, and engineering trade-offs for the MK2049-34SAI. It also explains where additional design data must be taken directly from the manufacturer datasheet, including the complete pin description and application-specific reference circuitry.

RFQ پەیوەندی
MK2049-36SI - 3.3V PLL Clock Synthesizer | Renesas
MK2049-36SI

MK2049-36SI - 3.3V PLL Clock Synthesizer | Renesas

Renesas Electronics MK2049-36SI is a 3.3 V PLL-based communications clock synthesizer that accepts multiple input frequencies and generates T1, E1, T3, E3, OC3 and other communications clock frequencies. The device uses an 8 kHz reference clock, produces LVCMOS outputs, and supports frequencies up to 77.76 MHz. It is supplied in a 20-pin SOIC package. The 3.3 V supply requirement, phase-locked-loop architecture and communications-oriented output range make the MK2049-36SI suitable for line-card, transmission, switching and other telecommunications clocking systems. A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies or divides a stable reference frequency while locking its internal oscillator to that reference. In the product hierarchy, a PLL synthesizer is a clock generator, a clock-and-timing IC and ultimately a semiconductor. Compared with a free-running oscillator, the phase-locked architecture allows multiple related output frequencies to share a common 8 kHz reference, reducing frequency drift between clocks and simplifying synchronization across a communications system. The MK2049-36 family provides one PLL-based clock-synthesis circuit with a maximum reported output frequency of 77.76 MHz. Its input and output signal format is LVCMOS, and the specified input-to-output ratio shown in the verified distributor listing is 1:3. The SI ordering suffix identifies the industrial 20-pin SOIC configuration. These characteristics make exact timing, supply-voltage and pin-level verification against the Renesas datasheet essential before replacing another PLL clock generator. The verified datasheet guidance states that the MK2049-36 requires only a small number of external components for proper operation. Decoupling capacitors of 0.01 µF should be connected between VDD and GND close to the device, particularly at pins 4 and 7 and at pins 15 and 17. The Renesas document also recommends 33 Ω series terminating resistors on clock outputs when traces exceed one inch and the characteristic impedance is assumed to be 50 Ω. These details minimize supply coupling and high-frequency clock-edge reflections. Typical applications include telecommunications line equipment, T1 and E1 interface systems, OC3 and E3 clock generation, Gigabit Ethernet clock-distribution networks, and legacy synchronous communications equipment. In these systems, the 3.3 V operating supply and LVCMOS interfaces simplify integration with compatible digital logic. The shared 8 kHz reference allows several output rates to remain phase-related, which is valuable when transmitters, switches, serializers and test equipment must operate coherently. Designers should preserve the manufacturer's recommended 0.01 µF decoupling layout and account for output drive requirements when the clock net is not properly terminated. The 33 Ω source-termination guidance is especially important for long PCB traces or cable connections because excessive edge reflections can degrade timing margin and produce spurious clock activity. Supply sequencing, crystal or oscillator startup behavior, and the exact configuration of each programmable output should be checked in the full datasheet. This product page consolidates the verified manufacturer and distributor information, identifies the documented external-component requirements, and distinguishes true same-package alternatives from redesign-level options. It also provides application-focused design guidance for engineers evaluating the MK2049-36SI as a legacy or production communications clock-synthesis component.

RFQ پەیوەندی
MK2049-36SILF - 77.76MHz 3.3V PLL Clock | Renesas
MK2049-36SILF

MK2049-36SILF - 77.76MHz 3.3V PLL Clock | Renesas

Renesas Electronics MK2049-36SILF is a 3.3 V communications clock PLL that generates a 77.76 MHz clock in a 20-pin SOIC package measuring 0.295 inches, or 7.50 mm, wide. The device is categorized as a voltage-controlled crystal oscillator PLL clock synthesizer, making it suitable for communications equipment requiring a stable, multiplied reference clock. A PLL clock synthesizer is a clock-and-timing integrated circuit that compares a reference signal with an internal feedback signal and generates a higher-frequency output with controlled phase relationships. In the broader semiconductor hierarchy, it belongs to clock generation, timing control, and frequency synthesis. Its output can provide a convenient clock source for transceivers, controllers, converters, and other digital systems that cannot directly operate from the crystal reference frequency. The MK2049-36SILF operates from 3.3 V and produces a 77.76 MHz clock. Its 20-SOIC package supports conventional surface-mount PCB assembly. The manufacturer documentation recommends 0.01 µF decoupling capacitors between VDD and GND near the device, especially near pins 4 and 7, and 15 and 17. It also recommends 33 Ω series termination resistors on clock outputs when PCB traces exceed approximately 1 inch. The PLL architecture allows the device to derive a higher-frequency communications clock while maintaining controlled frequency relationships. This is useful where a single reference oscillator must serve multiple timing requirements. Because clock edge quality affects downstream data integrity, the output nets should be routed away from high-current switching paths and terminated according to the actual trace geometry and receiver loading. Typical uses include communications modules, clock-distribution networks, interface controllers, frequency-conversion stages, and digital subsystems requiring a 77.76 MHz reference. The part can also serve as a reference for designs using the Site MPN family of audio converters and interface ICs when their clock architecture requires a compatible source. Layout is the primary design consideration. Place the 0.01 µF bypass capacitors directly beside their associated supply and ground pins, minimize the distance from the decoupling network to the package, and preserve a continuous ground reference beneath the device. Use short clock traces and add the recommended 33 Ω source termination when a trace approaches or exceeds 1 inch. This product page combines the device specifications, package details, application guidance, replacement considerations, and practical PCB recommendations into a focused engineering reference. It also distinguishes documented functions from characteristics that still require confirmation in the manufacturer datasheet before production release.

RFQ پەیوەندی
MK2049-36SITR - 3.3V PLL Clock Synthesizer | Renesas (Tape & Reel)
MK2049-36SITR

MK2049-36SITR - 3.3V PLL Clock Synthesizer | Renesas (Tape & Reel)

Renesas Electronics MK2049-36SITR is a 3.3 V PLL-based communications clock synthesizer that accepts multiple input frequencies and generates T1, E1, T3, E3, OC3 and other communications clock frequencies. The device uses an 8 kHz reference clock, produces LVCMOS outputs, and supports frequencies up to 77.76 MHz. It is supplied in a 20-pin SOIC package. The 3.3 V supply requirement, phase-locked-loop architecture and communications-oriented output range make the MK2049-36SITR suitable for line-card, transmission, switching and other telecommunications clocking systems. A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies or divides a stable reference frequency while locking its internal oscillator to that reference. In the product hierarchy, a PLL synthesizer is a clock generator, a clock-and-timing IC and ultimately a semiconductor. Compared with a free-running oscillator, the phase-locked architecture allows multiple related output frequencies to share a common 8 kHz reference, reducing frequency drift between clocks and simplifying synchronization across a communications system. The MK2049-36 family provides one PLL-based clock-synthesis circuit with a maximum reported output frequency of 77.76 MHz. Its input and output signal format is LVCMOS, and the specified input-to-output ratio shown in the verified distributor listing is 1:3. The SI ordering suffix identifies the industrial 20-pin SOIC configuration. These characteristics make exact timing, supply-voltage and pin-level verification against the Renesas datasheet essential before replacing another PLL clock generator. The verified datasheet guidance states that the MK2049-36 requires only a small number of external components for proper operation. Decoupling capacitors of 0.01 µF should be connected between VDD and GND close to the device, particularly at pins 4 and 7 and at pins 15 and 17. The Renesas document also recommends 33 Ω series terminating resistors on clock outputs when traces exceed one inch and the characteristic impedance is assumed to be 50 Ω. These details minimize supply coupling and high-frequency clock-edge reflections. Typical applications include telecommunications line equipment, T1 and E1 interface systems, OC3 and E3 clock generation, Gigabit Ethernet clock-distribution networks, and legacy synchronous communications equipment. In these systems, the 3.3 V operating supply and LVCMOS interfaces simplify integration with compatible digital logic. The shared 8 kHz reference allows several output rates to remain phase-related, which is valuable when transmitters, switches, serializers and test equipment must operate coherently. Designers should preserve the manufacturer's recommended 0.01 µF decoupling layout and account for output drive requirements when the clock net is not properly terminated. The 33 Ω source-termination guidance is especially important for long PCB traces or cable connections because excessive edge reflections can degrade timing margin and produce spurious clock activity. Supply sequencing, crystal or oscillator startup behavior, and the exact configuration of each programmable output should be checked in the full datasheet. This product page consolidates the verified manufacturer and distributor information, identifies the documented external-component requirements, and distinguishes true same-package alternatives from redesign-level options. It also provides application-focused design guidance for engineers evaluating the MK2049-36SITR as a legacy or production communications clock-synthesis component.

RFQ پەیوەندی
MK2049-45ASI - 51.84MHz Dual-PLL Clock Synth | Renesas
MK2049-45ASI

MK2049-45ASI - 51.84MHz Dual-PLL Clock Synth | Renesas

Renesas Electronics MK2049-45ASI is a 51.84 MHz maximum-frequency dual phase-locked-loop clock synthesizer in a 20-pin SOIC package. It operates from a 3.3 V communications-clock supply and provides one clock-output circuit with a stated input-to-output ratio of 1:3. The device is designed for frequency synthesis and jitter attenuation in communications clock systems. A phase-locked-loop clock synthesizer belongs to the clock and timing IC hierarchy, where it sits below clock-generation and frequency-synthesis functions. It locks an internal oscillator to a reference clock and then generates or divides reference-derived frequencies. Unlike a free-running oscillator, a PLL-based device can transfer frequency stability from an external reference while allowing output frequency synthesis, programmable division, and jitter attenuation. The MK2049-45ASI contains two PLL functions. According to the Renesas MK2049-45 datasheet, the first PLL is VCXO-based and uses a pullable crystal to track signal wander and attenuate input jitter. The second PLL supports frequency synthesis. A maximum output frequency of 51.84 MHz and a 1:3 input-to-output ratio identify the device as a communications-clock generation solution rather than a general-purpose timer. The device accepts a clock reference and produces a clock output without differential signaling. Its architecture is intended to support communications equipment that needs a stable, derived clock while limiting reference jitter. The 3.3 V supply designation also places the device in systems designed around low-voltage digital clock trees, provided the complete power, input, output, and decoupling requirements are followed from the manufacturer datasheet. Typical applications include communication line-card clocking, telecom backplane clock distribution, network-interface clock synthesis, and other systems requiring a PLL-derived communications reference. The maximum 51.84 MHz output makes it particularly relevant to designs operating below that frequency while using a stable external reference and controlled division ratio. When designing a board around the MK2049-45ASI, use the manufacturer pin-description table and recommended external-component values before finalizing the layout. Pay particular attention to clock-input routing, pullable-crystal implementation, output loading, supply decoupling, and unused-pin handling, because incorrect clock topology can undermine otherwise correct PLL operation. This product summary organizes the device architecture, package information, verified drop-in candidates, parameter comparisons, and practical clock-design guidance into a format that helps engineers evaluate the MK2049-45ASI before beginning a communications-clock schematic.

RFQ پەیوەندی
MK2049-45SI - 51.84MHz Dual PLL Clock Synthesizer | Renesas
MK2049-45SI

MK2049-45SI - 51.84MHz Dual PLL Clock Synthesizer | Renesas

Renesas Electronics Corporation MK2049-45SI is a 3.3 V dual phase-locked-loop clock synthesizer with a maximum output frequency of 51.84 MHz, configured for 8 kHz communications-clock locking, and housed in a 20-pin SOIC package. The device supports frequency synthesis and jitter attenuation, while its VCXO-based first PLL uses a pullable crystal to track signal wander and attenuate input jitter. A phase-locked loop is a timing-control circuit that locks an oscillator phase and frequency to a reference signal. Within the clock and timing hierarchy, a PLL clock synthesizer sits above a crystal oscillator and below communications timing systems, converting or distributing reference clocks while reducing phase noise and jitter. The MK2049-45 family provides selectable output frequencies and buffer-mode options for clocking systems that require deterministic low-jitter timing. The verified source data identifies 14 selectable output frequencies, two buffer-mode selections, a maximum frequency of 51.84 MHz, and operation from an 8 kHz communications-clock input. A 125 MHz high-frequency input is also listed in the comparison data for buffer or jitter-attenuation use. These functions allow one device to address both synthesized communications-clock generation and buffered high-frequency clock distribution. The first PLL is VCXO based and relies on a pullable crystal to follow input-clock wander while attenuating jitter. The second PLL provides the device's synthesis path, with programmable output selections providing flexibility across multiple communications requirements. The source material also identifies the MK2049-45SI as a clock generator, PLL clock synthesizer with one listed PLL channel and a 1:3 input-to-output ratio in one abbreviated specification source. Typical uses include communications infrastructure, line-card timing, 8 kHz-locked reference generation, and high-frequency clock buffering. The device is particularly relevant where an 8 kHz communications reference must be converted into one of 14 supported output frequencies. Its 20-pin SOIC package also allows reuse of an existing surface-mount layout when the appropriate pin configuration and electrical limits are confirmed against the manufacturer datasheet. Designers should verify the selected output frequency, PLL configuration, loop filters, crystal requirements, input-output ratio, and decoupling network against the official datasheet before layout release. The pullable crystal and VCXO topology are central to jitter performance, so incorrect component selection or filtering can undermine the intended phase-noise benefit. Pin assignments and crystal recommendations must be taken directly from the manufacturer documentation rather than inferred from the abbreviated distributor listing. This product analysis consolidates the verified distributor and manufacturer information, distinguishes the confirmed 8 kHz synthesis mode from the 125 MHz buffer mode, and identifies unresolved datasheet details explicitly. It also provides sourcing context, package-aware candidate references, and practical design cautions that are not apparent from a distributor search result alone.

RFQ پەیوەندی
MK2049-45SILF - 51.84MHz Dual PLL Clock Synthesizer | Renesas
MK2049-45SILF

MK2049-45SILF - 51.84MHz Dual PLL Clock Synthesizer | Renesas

Renesas Electronics MK2049-45SILF is a dual phase-locked-loop clock synthesizer with frequency synthesis and jitter attenuation, operating from a 3.3 V communications-clock supply and housed in a 20-pin SOIC package. The device is identified as a PLL clock synthesizer with a 51.84 MHz output frequency, while its reference circuitry accepts an 8 kHz clock input. Its first PLL uses a VCXO architecture with a pullable crystal to track signal wander and attenuate input jitter, providing a clocking solution for communications equipment requiring multiple synchronized outputs. A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies, divides, or filters a reference frequency to create stable system clocks. Its hierarchy runs from clock generator to frequency synthesizer, then to PLL-based clock and timing IC. The MK2049-45SILF uses phase locking to relate its synthesized outputs to an external reference, allowing the downstream circuitry to obtain predictable frequencies while reducing phase noise and timing wander. The principal benefits of this device are its dual-PLL organization, VCXO-based reference tracking, jitter attenuation, and support for communications-clock generation. The 51.84 MHz designation makes it relevant to legacy telecommunications, line-card, network-interface, and embedded synchronous systems. Using a single PLL-based clock synthesizer can reduce the number of separate oscillators and dividers required when several related clocks must remain phase-coherent. Its first PLL accepts a reference signal and tracks wander with a pullable crystal, while the second PLL provides frequency synthesis and additional jitter attenuation. This architecture is useful when the source reference includes timing noise or long-term drift and the system requires locally generated clocks with improved stability. The SOIC-20 package also offers a conventional surface-mount footprint compatible with established communications and industrial PCB layouts. Typical implementations include telecommunications line equipment, T1/E1 and related legacy transport systems, network-interface clock recovery, digital signal-processing modules, and embedded control systems requiring 51.84 MHz timing. In these applications, the PLL can derive operating clocks from a shared reference and distribute coherent timing among multiple functional blocks. Designers should follow the Renesas MK2049-45 datasheet for the reference-crystal selection, loop-filter configuration, output-routing options, decoupling requirements, and recommended component values. The reference path and crystal network are critical to jitter performance, so traces should be short, return paths continuous, and supply bypassing placed close to the device pins. This product page combines the manufacturer function description with distributor package and frequency data, practical PLL-design guidance, and confirmed cross-reference information. It is intended to help engineers determine whether the MK2049-45SILF fits a clocking requirement before completing reference, layout, qualification, and sourcing validation.

RFQ پەیوەندی
MK2049-45SITR - 51.84MHz Dual PLL Clock Synthesizer | Renesas (Tape & Reel)
MK2049-45SITR

MK2049-45SITR - 51.84MHz Dual PLL Clock Synthesizer | Renesas (Tape & Reel)

Renesas Electronics Corporation MK2049-45SITR is a 3.3 V dual phase-locked-loop clock synthesizer with a maximum output frequency of 51.84 MHz, configured for 8 kHz communications-clock locking, and housed in a 20-pin SOIC package. The device supports frequency synthesis and jitter attenuation, while its VCXO-based first PLL uses a pullable crystal to track signal wander and attenuate input jitter. A phase-locked loop is a timing-control circuit that locks an oscillator phase and frequency to a reference signal. Within the clock and timing hierarchy, a PLL clock synthesizer sits above a crystal oscillator and below communications timing systems, converting or distributing reference clocks while reducing phase noise and jitter. The MK2049-45 family provides selectable output frequencies and buffer-mode options for clocking systems that require deterministic low-jitter timing. The verified source data identifies 14 selectable output frequencies, two buffer-mode selections, a maximum frequency of 51.84 MHz, and operation from an 8 kHz communications-clock input. A 125 MHz high-frequency input is also listed in the comparison data for buffer or jitter-attenuation use. These functions allow one device to address both synthesized communications-clock generation and buffered high-frequency clock distribution. The first PLL is VCXO based and relies on a pullable crystal to follow input-clock wander while attenuating jitter. The second PLL provides the device's synthesis path, with programmable output selections providing flexibility across multiple communications requirements. The source material also identifies the MK2049-45SITR as a clock generator, PLL clock synthesizer with one listed PLL channel and a 1:3 input-to-output ratio in one abbreviated specification source. Typical uses include communications infrastructure, line-card timing, 8 kHz-locked reference generation, and high-frequency clock buffering. The device is particularly relevant where an 8 kHz communications reference must be converted into one of 14 supported output frequencies. Its 20-pin SOIC package also allows reuse of an existing surface-mount layout when the appropriate pin configuration and electrical limits are confirmed against the manufacturer datasheet. Designers should verify the selected output frequency, PLL configuration, loop filters, crystal requirements, input-output ratio, and decoupling network against the official datasheet before layout release. The pullable crystal and VCXO topology are central to jitter performance, so incorrect component selection or filtering can undermine the intended phase-noise benefit. Pin assignments and crystal recommendations must be taken directly from the manufacturer documentation rather than inferred from the abbreviated distributor listing. This product analysis consolidates the verified distributor and manufacturer information, distinguishes the confirmed 8 kHz synthesis mode from the 125 MHz buffer mode, and identifies unresolved datasheet details explicitly. It also provides sourcing context, package-aware candidate references, and practical design cautions that are not apparent from a distributor search result alone.

RFQ پەیوەندی
MK2058-01SI - 27MHz Clock Jitter Attenuator | Renesas Electronics
MK2058-01SI

MK2058-01SI - 27MHz Clock Jitter Attenuator | Renesas Electronics

Renesas Electronics MK2058-01SI is a VCXO-based clock jitter attenuator IC designed for system clock distribution, with a maximum operating frequency of 27 MHz, LVCMOS input and output, and a 2:1 input-to-output ratio in a 20-pin SOIC package. The device uses a 3.15 V to 3.45 V supply, integrates a PLL, and provides one clock circuit for applications that require a low-jitter distributed reference clock. A clock jitter attenuator is a timing-integrity device that reduces unwanted phase variation in a reference clock before it is distributed to a digital system. Clock generators and PLLs are members of the clock and timing IC hierarchy, while the MK2058-01SI specializes in conditioning an existing reference. Its VCXO-based architecture combines an oscillator with a phase-locked loop to attenuate jitter inherited from the incoming source or interconnect path. The verified feature set includes one clock channel, a 27 MHz maximum frequency, LVCMOS-compatible input and output signaling, and a 2:1 input-to-output division ratio. The single-ended architecture means that neither the input nor the output is differential. These characteristics make the device suitable for system clock distribution where a 2:1 divided clock and single-ended LVCMOS interface match the receiving logic. The MK2058-01SI integrates a PLL and a voltage-controlled crystal oscillator rather than functioning only as a frequency divider. This architecture is intended to suppress clock jitter while maintaining a stable system reference. Because the input and output are single-ended, board-level return paths and clock trace topology remain important; short connections, a controlled ground reference, and avoidance of disruptive nearby circuitry can help preserve timing quality. Typical uses include communications equipment, networking systems, embedded digital platforms, and clock-distribution subsystems operating below or at 27 MHz. It is particularly relevant when the source clock exhibits timing variation and the downstream circuitry benefits from a conditioned 2:1 reference. The 20-SOIC surface-mount package supports conventional PCB assembly, although the available 0.295-inch, 7.50 mm-wide body requires careful lead spacing and thermal-layout consideration. Designers should verify crystal selection, loop-filter settings, input waveform quality, and output-drive requirements against the manufacturer datasheet before production release. The data identifies the device as a VCXO-based jitter attenuator, but the supplied source material does not expose the complete recommended external-component list or all electrical characteristics. This page consolidates the verified Renesas and distributor facts for the MK2058-01SI, distinguishes confirmed specifications from missing datasheet parameters, and explains selection trade-offs without presenting unsupported substitutions as drop-in equivalents.

RFQ پەیوەندی
MK2058-01SITR - 27MHz Clock Jitter Attenuator | Renesas Electronics (Tape & Reel)
MK2058-01SITR

MK2058-01SITR - 27MHz Clock Jitter Attenuator | Renesas Electronics (Tape & Reel)

Renesas Electronics MK2058-01SITR is a VCXO-based clock jitter attenuator IC designed for system clock distribution, with a maximum operating frequency of 27 MHz, LVCMOS input and output, and a 2:1 input-to-output ratio in a 20-pin SOIC package. The device uses a 3.15 V to 3.45 V supply, integrates a PLL, and provides one clock circuit for applications that require a low-jitter distributed reference clock. A clock jitter attenuator is a timing-integrity device that reduces unwanted phase variation in a reference clock before it is distributed to a digital system. Clock generators and PLLs are members of the clock and timing IC hierarchy, while the MK2058-01SITR specializes in conditioning an existing reference. Its VCXO-based architecture combines an oscillator with a phase-locked loop to attenuate jitter inherited from the incoming source or interconnect path. The verified feature set includes one clock channel, a 27 MHz maximum frequency, LVCMOS-compatible input and output signaling, and a 2:1 input-to-output division ratio. The single-ended architecture means that neither the input nor the output is differential. These characteristics make the device suitable for system clock distribution where a 2:1 divided clock and single-ended LVCMOS interface match the receiving logic. The MK2058-01SITR integrates a PLL and a voltage-controlled crystal oscillator rather than functioning only as a frequency divider. This architecture is intended to suppress clock jitter while maintaining a stable system reference. Because the input and output are single-ended, board-level return paths and clock trace topology remain important; short connections, a controlled ground reference, and avoidance of disruptive nearby circuitry can help preserve timing quality. Typical uses include communications equipment, networking systems, embedded digital platforms, and clock-distribution subsystems operating below or at 27 MHz. It is particularly relevant when the source clock exhibits timing variation and the downstream circuitry benefits from a conditioned 2:1 reference. The 20-SOIC surface-mount package supports conventional PCB assembly, although the available 0.295-inch, 7.50 mm-wide body requires careful lead spacing and thermal-layout consideration. Designers should verify crystal selection, loop-filter settings, input waveform quality, and output-drive requirements against the manufacturer datasheet before production release. The data identifies the device as a VCXO-based jitter attenuator, but the supplied source material does not expose the complete recommended external-component list or all electrical characteristics. This page consolidates the verified Renesas and distributor facts for the MK2058-01SITR, distinguishes confirmed specifications from missing datasheet parameters, and explains selection trade-offs without presenting unsupported substitutions as drop-in equivalents.

RFQ پەیوەندی
MK2059-01SI - 25.92MHz Clock Translator | Renesas | Telecom
MK2059-01SI

MK2059-01SI - 25.92MHz Clock Translator | Renesas | Telecom

The Renesas Electronics MK2059-01SI is a VCXO-based frame clock frequency translator with a maximum output frequency of 25.92 MHz, LVCMOS input and output interfaces, and a 20-pin SOIC package. It accepts an 8 kHz frame-rate reference clock and phase-locks its generated output to that reference, producing common telecommunications clock frequencies. A voltage-controlled crystal oscillator-based clock translator is a clock-generation IC that combines frequency translation, phase locking, and reference synchronization. It belongs to the broader clock and timing IC hierarchy, where clock generators and phase-locked loops support communication networks, digital transport systems, and other equipment requiring stable, traceable timing references. Unlike a free-running oscillator, the MK2059-01SI derives its output from an external reference, improving synchronization across a telecommunications system. Key features include a 25.92 MHz maximum output frequency, an input-to-output ratio of 2:1, LVCMOS input and output signaling, and an integrated PLL. The supply-voltage range is 3.15 V to 3.45 V, while the rated operating-temperature range is -40°C to +85°C. The surface-mount 20-SOIC package provides a compact option for communication and timing equipment. Internally, the device uses a VCXO-based architecture and PLL-based clock generation to lock the generated clock to the 8 kHz input reference. This phase-locked relationship is the principal technical feature: the output is not intended as an unrelated free-running oscillator but as a translated reference derived from the incoming frame clock. The PLL feature and LVCMOS interfaces place the device in the class of integrated frequency translators intended for telecommunications clocking. Typical applications include telecommunications line equipment, frame-clock synchronization networks, clock distribution subsystems, and communication interfaces that require a derived reference from an 8 kHz source. The 25.92 MHz maximum output makes it suitable for systems operating at the stated common telecommunications reference frequency, while the 3.15 V to 3.45 V supply range supports low-voltage digital clock architectures. Designers should verify the input reference amplitude, output waveform, PLL loop stability, and decoupling requirements against the manufacturer datasheet before layout. The LVCMOS clock path requires short, controlled-impedance routing and clean return paths, while the 20-SOIC footprint requires adequate board area and thermal consideration for reliable assembly. This page combines verified manufacturer and distributor information with explicit data gaps, application guidance, and package-specific replacement analysis. It is intended to help engineers evaluate the MK2059-01SI without mistaking packaging variants for functionally different devices or assuming unreported electrical specifications.

RFQ پەیوەندی