بەرهەمەکان (5,100+)

ADM202JRN - Dual RS-232 Transceiver, 5V | Analog Devices
ADM202JRN

ADM202JRN - Dual RS-232 Transceiver, 5V | Analog Devices

The Analog Devices ADM202JRN is a dual-channel RS-232 line driver and receiver pair operating from a single 5 V supply, packaged in a 16-pin SOIC. It uses an on-chip charge pump with 0.1 µF capacitors to generate approximately ±10 V RS-232 output levels and supports data rates up to 120 kB/s. The device provides two drivers and two receivers, making it suitable for compact point-to-point serial interfaces where transmit and receive functions are required in one package. An RS-232 transceiver is an interface IC that converts logic-level signals into differential, bipolar RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. In the broader electronics hierarchy, an RS-232 transceiver belongs to the interface-IC family and provides the physical-layer conversion between digital logic and a wired communications port. The ADM202JRN is designed for equipment that needs a single 5 V supply rather than a separate external RS-232 voltage source. The ADM202 uses a charge-pump voltage converter to generate the positive and negative voltages required by RS-232 drivers. According to the manufacturer information, the charge pump permits the external capacitor value to be as small as 0.1 µF. The fast driver slew rates permit operation at 120 kB/s, while the high drive-current capability is intended to support extended cable lengths in suitable RS-232 applications. The device meets or exceeds the TIA/EIA-232-E and V.28 specifications identified in the Analog Devices product description. Its dual-driver and dual-receiver arrangement supports two independent RS-232 channels in one package, reducing board area compared with separate single-direction driver and receiver devices. The 16-pin SOIC package is also compatible with common surface-mount manufacturing and assembly processes. Typical applications include industrial serial adapters, test equipment, point-of-sale terminals, data acquisition systems, computer peripherals, and control equipment that exchange serial data over RS-232 links. In these systems, the ADM202JRN provides the interface between a low-voltage digital controller and an external RS-232 connector. The 5 V supply requirement simplifies system power architecture, while the integrated charge pump eliminates a separate bipolar power supply for the line drivers. When laying out the circuit, place the charge-pump capacitors and the RS-232 line-side protection components close to the device and connector. Verify the transceiver’s logic levels, ground connection, and cable routing against the system interface requirements. The complete pin assignment and recommended external network should be taken from the manufacturer datasheet before PCB routing. This product page combines the manufacturer’s technical description with practical interface guidance, packaging details, comparison criteria, and sourcing information. It is intended to help engineers confirm electrical fit, interface function, and board-level implementation requirements before selecting the ADM202JRN for a 5 V RS-232 design.

RFQ پەیوەندی
ADM202JRW - 120kbps Dual RS-232 Transceiver | Analog Devices
ADM202JRW

ADM202JRW - 120kbps Dual RS-232 Transceiver | Analog Devices

The Analog Devices ADM202JRW is a dual-channel RS-232 driver/receiver transceiver operating from a single 5 V supply, supporting 120 kbit/s data rates and ±10 V RS-232 output levels in a 16-pin SOIC package. The device combines two drivers and two receivers with an on-chip charge pump that permits charge-pump capacitors as small as 0.1 µF. An RS-232 transceiver is an interface IC that converts logic-level signals into balanced, voltage-swing serial signals and converts incoming RS-232 levels back into digital logic. Within the signal-chain hierarchy, the ADM202 belongs to the RS-232 interface class, connecting UART, microcontrollers, industrial controllers, and data-processing equipment to longer-distance serial links. Its BiCMOS construction and efficient charge-pump design provide compact integration without a separate negative power supply. Key features include two transmit channels, two receive channels, a single 5 V supply, and data-rate support up to 120 kbit/s. The charge pump generates approximately ±10 V output levels from the 5 V supply, while external 0.1 µF capacitors supply the required charge-pump energy. The device meets or exceeds the TIA/EIA-232-E and V.28 specifications, providing compatibility with conventional RS-232 port signaling. The fast driver slew rate supports 120 kbit/s operation and preserves usable bandwidth for UART-based control, monitoring, and point-to-point communication links. High driver drive current allows extended cable lengths compared with weaker line drivers, while BiCMOS construction reduces power consumption to approximately 10 mW and helps protect against latch-up. The specified 16-pin SOIC package supports conventional surface-mount assembly and automated manufacturing. Typical uses include industrial serial adapters, instrumentation interfaces, point-of-sale equipment, data acquisition modules, and embedded control systems. It is especially useful where a design needs both transmit and receive functions but only two channels, and where generating a negative RS-232 voltage with a discrete charge pump would add component count and board area. Designers should place the charge-pump capacitors close to their associated pins and provide the required bypass capacitance at the 5 V supply. Because this is a single-ended RS-232 interface, transient protection and grounding remain important when the connected cable leaves the equipment enclosure or crosses substantial noise environments. This page combines manufacturer specifications, verified distributor information, package-level replacement guidance, and application-oriented design notes to help engineers evaluate the ADM202JRW beyond a basic distributor listing.

RFQ پەیوەندی
ADM202JRWZ - 5V Dual RS-232 Transceiver | Analog Devices
ADM202JRWZ

ADM202JRWZ - 5V Dual RS-232 Transceiver | Analog Devices

Analog Devices ADM202JRWZ is a 2-channel, full-duplex RS-232 line driver/receiver pair designed to operate from a single 5 V supply. It supports two driver channels and two receiver channels, generates approximately +10 V and -10 V RS-232 output levels with an on-chip charge pump, and requires external charge-pump capacitors as small as 0.1 µF. The device is packaged in a 16-pin SOIC. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a cable-based RS-232 port. It combines a line driver, which converts low-voltage digital signals into RS-232-compatible levels, with a receiver, which converts incoming RS-232 levels back into logic levels. Within the interface hierarchy, the ADM202JRWZ belongs to the RS-232 driver/receiver and transceiver class of data-communication interface ICs. Key features include operation from one 5 V supply, two transmit and two receive channels, an efficient on-chip charge pump, and approximately ±10 V bipolar output levels. According to the Analog Devices product information, the device meets or exceeds the TIA/EIA-232-E and V.28 specifications. The small 0.1 µF charge-pump capacitors reduce external component size, while the integrated charge-pump circuit simplifies implementation of a working RS-232 port. The ADM202 architecture separates the two communication directions, allowing full-duplex operation when the corresponding driver outputs and receiver inputs are connected to the same RS-232 lines. Fast driver slew rates support reliable data transmission, and the CMOS-compatible logic interface allows the device to connect directly to a host UART or other digital controller. The 16-SOIC package is suitable for conventional through-hole assembly and automated surface-mount production. Typical uses include industrial serial consoles, instrumentation, data acquisition equipment, embedded-control systems, and legacy peripheral connections. Two transceiver channels can serve two RS-232 ports or connect to a multiport interface arrangement. The 5 V operating supply also simplifies integration with equipment designed around TTL/CMOS logic and a separate regulated 5 V rail. PCB design should prioritize short charge-pump capacitor connections, a low-impedance ground return, and protection appropriate to the exposed connector environment. Keep sensitive receiver traces away from fast driver outputs and switching nodes, and follow the pin-description and decoupling guidance in the manufacturer datasheet when assigning tracks and grounding the device. This product guide combines the manufacturer application details with package, purchasing, replacement, and implementation guidance for engineers evaluating the ADM202JRWZ. It emphasizes the verified 5 V, dual-channel, charge-pump, ±10 V, and 16-SOIC characteristics while separating confirmed information from specifications that still require datasheet confirmation.

RFQ پەیوەندی
ADM203JN - 120 kB/s 5 V RS-232 Transceiver | Analog Devices
ADM203JN

ADM203JN - 120 kB/s 5 V RS-232 Transceiver | Analog Devices

The Analog Devices ADM203JN is a high-speed, single-supply CMOS RS-232 driver/receiver with a 120 kB/s transmission rate, two drivers, and two receivers in a 20-pin through-hole DIP package. It operates from a 5 V supply, requires no external charge-pump capacitors, and includes onboard DC-DC conversion that produces approximately 9 V for RS-232-level output. An RS-232 transceiver is an interface IC that translates between single-ended CMOS logic levels and differential, bipolar RS-232 voltage levels. It belongs to the interface-IC hierarchy, where transceivers combine line drivers and receivers for serial data links. The ADM203JN is designed for equipment that needs bidirectional or multi-channel RS-232 connectivity while minimizing external charge-pump components. Verified source data identifies key features as 120 kB/s transmission, a single 5 V power supply, compliance with EIA-232-E and V.28 specifications, two drivers, two receivers, onboard DC-DC converters, and no external capacitors for the ADM203 version. These characteristics make it suitable for industrial control, test equipment, point-of-sale terminals, and computer peripherals using RS-232 links. The device's integrated charge-pump approach simplifies board layout compared with older RS-232 implementations that require external pump capacitors. Its high drive current is described in the verified material as supporting extended cable lengths, while the 120 kB/s rate supports faster serial data transfer than many conventional RS-232 designs. Typical circuit use places the IC between a host UART and an external RS-232 connector. Logic-side inputs and outputs use CMOS-compatible levels, while driver outputs handle the higher RS-232 voltage swings generated by the internal converter. Board layout should keep connector and interface traces short where possible, provide adequate bypassing, and follow the manufacturer's datasheet for decoupling and signal routing. This page combines verified ADM203JN specifications, sourcing information, interface-category guidance, and design notes. It also distinguishes confirmed facts from unavailable electrical details, avoiding unsupported claims about parameters that are not present in the supplied sources.

RFQ پەیوەندی
ADM203JNZ - Dual 5V RS-232 Transceiver | Analog Devices
ADM203JNZ

ADM203JNZ - Dual 5V RS-232 Transceiver | Analog Devices

The Analog Devices ADM203JNZ is a dual RS-232 line driver and receiver operating from a single +5 V supply in a 20-pin PDIP-N package. It provides two transmit channels and two receive channels, uses 0.1 µF charge-pump capacitors, supports data rates up to 120 kB/s, and is designed to meet or exceed the EIA-232-E and V.28 specifications. The device is intended for bidirectional serial-interface designs requiring a compact, integrated RS-232 solution. An RS-232 transceiver is an interface IC that converts logic-level TTL signals into differential, bipolar RS-232 line levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the transceiver class within interface ICs and connects UART-based digital systems to serial ports, industrial equipment, data acquisition systems, and communications equipment. The ADM203JNZ combines drivers and receivers in one package while deriving the required positive and negative RS-232 voltage levels from a 5 V supply. The principal features include dual RS-232 driver/receiver operation, a single +5 V supply, operation up to 120 kB/s, and fast driver slew rates. According to the manufacturer datasheet information identified in the verified search results, the high-drive-current implementation can also support extended cable lengths. The EIA-232-E and V.28 compliance statements provide useful context for systems designed around standardized RS-232 electrical behavior, while the integrated receiver and driver circuitry reduces the number of discrete interface components required. The ADM203 series uses CMOS-compatible driver and receiver circuitry with external 0.1 µF charge-pump capacitors, eliminating the need for a separate bipolar supply. This architecture allows compact single-supply equipment while retaining the voltage translation required by RS-232. Designers must still account for the charge-pump capacitor tolerance, startup behavior, connector ground, cable routing, and the large voltage swings present at the physical interface. Typical uses include serial-port adapters, industrial controllers, test and measurement instruments, point-of-sale terminals, data loggers, and embedded systems that expose a legacy RS-232 port. It is particularly appropriate when a board requires two RS-232 channels and the system uses a 5 V supply. A UART or other communications controller provides the parallel logic data, while the ADM203JNZ handles the physical-layer conversion. Place the two 0.1 µF charge-pump capacitors close to their designated pins, maintain the datasheet-recommended loop area, and connect the interface reference ground to the circuit ground according to the layout guidance. Confirm signal polarity, receiver enable behavior, and cable length during design review. The 120 kB/s rating should not be interpreted as permission to use unshielded cabling at every installation distance because RS-232 cable performance remains system-dependent. This product record combines the verified manufacturer-derived features, distributor availability references, packaging information, and drop-in comparison candidates in one engineering-focused view. It also distinguishes documented electrical attributes from unavailable pricing, lifecycle, environmental, and detailed pinout data rather than estimating missing values.

RFQ پەیوەندی
ADM206AN - 4/3 RS-232 200 kbps Transceiver | Analog Devices
ADM206AN

ADM206AN - 4/3 RS-232 200 kbps Transceiver | Analog Devices

The Analog Devices ADM206AN is a +5 V powered CMOS RS-232 transceiver with four drivers, three receivers, a shutdown pin, and an enable pin, operating at up to 200 kbps in a 24-pin PDIP package. According to the Analog Devices product page, the device uses only 0.1 µF charge-pump capacitors and is intended for systems that cannot provide ±12 V rails. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232-compatible line levels and converts received line levels back into logic-level signals. The ADM206 family belongs to the broader line-driver/receiver and interface-IC hierarchy, where EIA-232-E and V.28 links connect embedded systems, computers, industrial controllers, and communications equipment. Its single +5 V supply and integrated charge-pump support simplify systems that require RS-232 functionality without external negative-voltage generation. The ADM206 provides four transmit channels and three receive channels. The receiver design is intended for dependable operation across RS-232 signal levels, while the driver outputs use the device's CMOS charge-pump approach to produce the required bipolar line voltage. The device also includes shutdown control and an enable function, allowing power management or interface isolation in multi-channel systems. Its 200 kbps capability is suitable for moderate-speed serial links rather than high-speed differential interconnects. The ADM206AN is the through-hole PDIP-24 ordering variant. The provided manufacturer and distributor data identify a 24-pin PDIP package, while a surface-mount ADM206ARZ variant is a different package and is not a drop-in replacement for a PDIP footprint. Engineers should therefore preserve the package outline and verify the exact pin functions in the manufacturer datasheet before substitution. Typical uses include RS-232 ports in embedded control equipment, test systems, industrial instrumentation, computer peripherals, and service interfaces. For new designs, the shutdown and enable pins can support power sequencing or reduce consumption when the interface is idle. The principal trade-off is that a +5 V RS-232 solution still uses external charge-pump capacitors and occupies a relatively large through-hole package compared with newer compact interface transceivers. Use the manufacturer's ADM206 datasheet and product page to confirm pinout, capacitor values, receiver thresholds, timing, and absolute maximum ratings. Do not infer values from a distributor listing alone. This page distinguishes verified product identity and application context from electrical parameters that require confirmation in the full datasheet.

RFQ پەیوەندی
ADM206ANZ - 5V RS-232 Transceiver | Analog Devices
ADM206ANZ

ADM206ANZ - 5V RS-232 Transceiver | Analog Devices

Analog Devices ADM206ANZ is a 5 V powered CMOS RS-232 transceiver with four drivers, three receivers, an enable pin, and a shutdown pin in a 24-DIP package. The device operates from a 4.5 V to 5.5 V supply, uses external 0.1 µF charge-pump capacitors, and produces approximately ±9 V RS-232 output swing from a single 5 V rail. Analog Devices identifies the ADM206 family as supporting RS-232 communication at 200 kBPS. An RS-232 transceiver is an interface IC that combines digital line drivers and receivers with charge-pump voltage generation. It translates logic-level signals between a host or peripheral and the bipolar, positive and negative voltage levels used by RS-232 links. As a communication interface semiconductor, it belongs to the RS-232 transceiver, interface converter, and power management signal-chain hierarchy. The principal benefit of the ADM206ANZ is its combination of four driver channels, three receiver channels, shutdown control, and enable control in one package. Its 5 V supply reduces the need for a separate ±12 V source, while the on-board DC-to-DC converters generate the positive and negative voltages required by RS-232 drivers. The 0.1 µF external-capacitor configuration supports integration into compact multi-port serial-interface equipment. The Analog Devices ADM206 family combines CMOS-compatible logic with RS-232 electrical-interface conversion. Four driver outputs support multiple outbound channels, while three receiver inputs return three inbound channels. A shutdown pin is used to reduce power consumption when the interface is not active, and an enable pin provides additional operating-state control. This architecture is useful when a system must manage several serial ports but cannot justify four separate single-channel interface devices. Typical applications include industrial serial-port controllers, data-acquisition equipment, test and measurement instruments, embedded service interfaces, point-of-sale terminals, and legacy computer peripherals. The device is particularly appropriate where a modern controller provides TTL or CMOS logic but the external equipment still requires an RS-232 connection. Its multi-channel arrangement can simplify wiring and reduce the number of interface components on a control board. Circuit design should follow the charge-pump capacitor and bypass recommendations in the manufacturer datasheet, maintain the required logic levels, and account for the additional board area of a 24-DIP package. Cable-side protection, grounding, and isolation requirements remain system-level considerations. Confirm signal polarity, receiver enable behavior, and shutdown-state pin states before using the transceiver with a new peripheral. This product summary combines the family-level electrical functions, package information, lifecycle statement, and documented cross-reference candidates to support faster design review. It also identifies the need to verify exact pin-level substitutions rather than treating every electrically similar RS-232 device as an automatic replacement.

RFQ پەیوەندی
ADM206AR - 4/3 +5V RS-232 Transceiver | Analog Devices
ADM206AR

ADM206AR - 4/3 +5V RS-232 Transceiver | Analog Devices

The Analog Devices ADM206AR is a +5 V powered CMOS RS-232 transceiver with four drivers, three receivers, a shutdown pin, and an enable pin in a 24-SOIC package. Its specified 200 kbps data rate, 0.1 µF charge-pump capacitor requirement, 9 V output swing, and 30 V receiver input levels make it suitable for compact single-supply serial interfaces where ±12 V is unavailable. What is an RS-232 transceiver? An RS-232 transceiver combines line drivers and receivers that translate between digital logic levels and bipolar serial-interface signals. The driver channels transmit data, while receiver channels interpret incoming RS-232 levels. In the broader hierarchy, it is an interface transceiver, a communications IC, and a semiconductor designed for point-to-point serial data links. The ADM206AR is especially useful when a system has only a +5 V supply but requires the voltage levels and noise immunity associated with RS-232. Its four-driver and three-receiver arrangement can serve several channels where space is constrained. The manufacturer describes the device as a 200 kbps RS-232 transceiver with an integrated shutdown function and enable control. Operationally, the device uses charge-pump circuitry to generate the bipolar signal levels required by RS-232 from the single positive supply. The verified product description identifies 0.1 µF capacitors for charge-pump operation and reports a 9 V output swing with a +5 V supply. The receivers accept input voltages identified in the source data as extending to 30 V, which helps when the interface cable introduces larger transients or sees voltage offsets. Typical applications include serial adapters, embedded instrumentation, industrial control links, test equipment, and legacy computer peripherals. Because the ADM206AR includes both shutdown and enable pins, it can support systems that need controlled power states or channel management. The 24-SOIC package also remains convenient for through-hole and mixed-signal PCB assembly. When laying out the circuit, place the charge-pump capacitor and interface protection components according to the manufacturer’s recommended layout and keep the RS-232 connector-side traces physically separated from sensitive logic where practical. Confirm the exact receiver enable, shutdown, and channel pin assignments against the official ADM206 datasheet before final PCB release. This page combines verified manufacturer and distributor information, package-aware replacement guidance, interface design considerations, and application-oriented selection context. It is intended to help engineers evaluate the ADM206AR against alternatives without assuming that every RS-232 IC is pin-compatible.

RFQ پەیوەندی
ADM206ARSZ - 4/3 RS-232 Transceiver | Analog Devices
ADM206ARSZ

ADM206ARSZ - 4/3 RS-232 Transceiver | Analog Devices

Analog Devices ADM206ARSZ is a 5 V CMOS RS-232 transceiver with four drivers, three receivers, 200 kbps signaling, and integrated charge-pump circuitry in a 24-SSOP package. Its 0.1 µF charge-pump capacitors reduce external component count, while the on-board converters provide approximately ±9 V output swing from a single 5 V supply. An RS-232 transceiver is an interface IC that converts between digital logic levels and the voltage levels used by RS-232 links. It belongs to the line-driver and line-receiver family, combines transmitter and receiver functions in one package, and is used where legacy equipment or industrial peripherals require robust serial communication over several meters. The ADM206 family is designed for EIA-232-E and V.28 interfaces when a ±12 V supply is unavailable. Key features include four RS-232 drivers, three RS-232 receivers, a shutdown pin, an enable pin, and operation from a single +5 V supply. The integrated DC-to-DC converters generate the bipolar voltage levels required by RS-232 transmitters. This approach simplifies system power design because the circuit does not require a separate negative supply rail. The 24-SSOP package also reduces board area compared with larger leaded transceiver packages. The transceiver architecture separates transmit and receive signal paths while allowing unused receivers to remain active during shutdown. Logic-level enable and shutdown controls support systems that need to isolate, reset, or reduce power consumption in the interface section. The manufacturer describes the ADM206 family as suitable for EIA-232-E and V.28 communications interfaces, particularly where a 12 V supply is not available. Typical applications include industrial serial-port adapters, instrumentation links, data acquisition systems, test equipment, embedded-control peripherals, and legacy computer equipment. Four driver channels can support multiple outgoing RS-232 signals, while three receiver channels suit interfaces with fewer inbound signals. Its integrated charge-pump support makes it especially useful where PCB area and external component count are important. The main design consideration is charge-pump capacitor placement. Follow the manufacturer’s polarity and capacitance requirements for the 0.1 µF capacitors and keep the associated traces short. Because the device generates high-voltage RS-232 signals from a 5 V rail, care is also needed to protect adjacent low-level circuitry from ESD events and to maintain suitable signal-return paths on long cables. This page combines the manufacturer’s functional description with package, interface, sourcing, replacement, and design guidance. It also distinguishes verified same-package drop-in options from functionally similar devices that require a different footprint, helping engineers avoid PCB redesigns and unintended interface incompatibilities.

RFQ پەیوەندی
ADM206ARZ - 4/3 RS-232 Transceiver, 200 kbps | Analog Devices
ADM206ARZ

ADM206ARZ - 4/3 RS-232 Transceiver, 200 kbps | Analog Devices

Analog Devices ADM206ARZ is a four-driver, three-receiver RS-232 transceiver designed for single 5 V operation, with 0.1 µF charge-pump capacitors and a 200 kbps data rate in a 24-pin SOIC package. It uses on-board DC-to-DC conversion to produce approximately ±9 V output swings without requiring external ±12 V supplies, while operating from a 4.5 V to 5.5 V source. An RS-232 transceiver is an interface IC that converts digital logic-level signals into RS-232 line levels and receives RS-232 signals for conversion back to CMOS logic levels. Within the interface hierarchy, the ADM206ARZ belongs to the RS-232 transceiver class of communication interface ICs. It supports point-to-point serial links where ground and signal conductors connect two pieces of equipment over distances defined by the RS-232 electrical standard. The device provides four line drivers, three receivers, a shutdown pin, and an enable pin. Its advertised 200 kbps maximum data rate suits moderate-speed data acquisition, industrial control, instrumentation, and equipment interfaces. The ±9 V charge-pump outputs provide greater noise margin than a simple ground-referenced driver would offer, while the low-power design is rated at 15 mW under the stated operating condition. The 0.1 µF external charge-pump capacitor requirement simplifies external power-supply design compared with discrete RS-232 level-shifter networks. A single 5 V rail powers the receiver, driver, and charge-pump circuitry, reducing board area and assembly complexity. Control inputs support shutdown and operating-state management when a system needs to reduce power or isolate the interface. Typical applications include industrial serial consoles, laboratory instruments, barcode and identification equipment, embedded control systems, and point-to-point links between a controller and peripheral. Because the interface uses single-ended RS-232 signaling, the board layout should keep the driver outputs and receiver inputs away from switching nodes and noisy analog sections. Design the 5 V supply to remain within 4.5 V to 5.5 V, and follow the Analog Devices datasheet when selecting charge-pump capacitor voltage ratings, grounding, and protection networks. Confirm signal levels, receiver enable polarity, and connector pin assignments in the application circuit before layout release. This product page organizes the manufacturer specifications, sourcing guidance, interface comparisons, pin-package constraints, and practical RS-232 design considerations needed to evaluate the ADM206ARZ as a multi-channel single-supply transceiver.

RFQ پەیوەندی
ADM206EAR - 4/3 RS-232 Transceiver, 200 kbps | Analog Devices
ADM206EAR

ADM206EAR - 4/3 RS-232 Transceiver, 200 kbps | Analog Devices

Analog Devices ADM206EAR is a +5 V CMOS RS-232 transceiver with four line drivers, three line receivers, a shutdown pin, and an enable pin in a 24-pin SOIC package. It supports data rates up to 200 kbps and uses 0.1 uF charge-pump capacitors for single-supply operation. The ADM2xxE family is designed for robust point-to-point serial interfaces where a modern logic-level UART must connect to an RS-232 port. An RS-232 transceiver is an interface IC that combines voltage-level drivers and receivers with charge-pump circuitry. The drivers convert low-voltage CMOS logic signals into RS-232 bipolar levels, while the receivers convert bipolar line signals back into CMOS-compatible levels. As a member of the interface IC hierarchy, the ADM206EAR sits between UART controllers and external RS-232 equipment, providing signal translation, port direction control, and electrostatic-discharge protection. Key features include four drivers, three receivers, operation from a single +5 V supply, and data rates up to 200 kbps. The shutdown and enable controls support power management and port isolation. According to the Analog Devices ADM206E product information, all devices in the family conform to EIA-232E and CCITT V.28 specifications. Their integrated protection is intended to withstand harsh electrical environments and reduce the need for separate TransZorbs on protected RS-232 lines. The device uses on-chip charge pumps to generate the positive and negative voltages required by RS-232 drivers from one +5 V source. Charge-pump capacitors should be connected exactly as shown in the manufacturer application circuit. Because the line interface uses bipolar voltage levels, the device is intended for RS-232 ports, not RS-485 or RS-422 multidrop networks. Driver and receiver enable controls can suppress unwanted activity during shutdown or when multiple interfaces share a system enclosure. Typical uses include industrial serial consoles, laboratory instrument control, point-of-sale terminals, data-acquisition equipment, and embedded systems connected through legacy RS-232 ports. The four-driver and three-receiver arrangement supports several unidirectional channels or a mixture of data and control lines. Because maximum cable length and data rate are inversely related, the selected baud rate and cable type should be checked against the target RS-232 application. For a robust layout, place the 0.1 uF charge-pump capacitors close to their designated pins, route each RS-232 line directly to its connector, and keep unprotected logic-side traces away from cable transients. The datasheet pin-description table should be used to verify every connection before manufacturing. The enable and shutdown pins also require defined logic levels during reset so the drivers do not start in an unintended state. This product page combines the manufacturer interface overview, package information, ordering details, replacement guidance, and practical PCB design notes. It also distinguishes the exact ADM206EAR from related ADM2xxE devices whose driver counts, shutdown behavior, enable architecture, or package differ. The result helps engineers determine pin compatibility, data-rate suitability, and the correct role for each RS-232 channel before committing a board layout.

RFQ پەیوەندی
ADM207AN - 5V RS-232 Interface, 120 kbps | Analog Devices
ADM207AN

ADM207AN - 5V RS-232 Interface, 120 kbps | Analog Devices

Analog Devices ADM207AN is a five-driver, three-receiver CMOS RS-232 interface transceiver with a 5 V supply, 120 kB/s data rate, and on-board DC-to-DC converters. It is packaged in a 24-pin PDIP and supports EIA-232-E and V.28 links where approximately ±12 V is unavailable. The verified family data also identifies ±9 V output swing, low 15 mW power, and receiver inputs rated to ±30 V. An RS-232 transceiver is an interface IC that translates between complementary TTL/CMOS logic and bipolar, single-ended RS-232 signals. It belongs to the communication-interface hierarchy: RS-232 interface IC → line driver and receiver → interface IC → semiconductor. Drivers amplify logic signals for a cable, while receivers detect cable voltage levels and present them to a host controller. On-board converters eliminate the need for a separate negative supply rail. Key features include support for external charge-pump capacitors from 0.1 µF to 10 µF, a maximum data rate of 120 kB/s, and pin compatibility with the MAX206 through MAX211 and MAX213 families. Latch-up-free operation is stated in the available manufacturer-family data. The ±30 V receiver input capability provides additional tolerance to transients encountered on external cabling, although system-level protection and grounding still require engineering review. The ADM207AN uses five driver channels and three receiver channels, allowing multiple serial functions or unused-line handling in one circuit. Its 5 V CMOS architecture simplifies interfacing with 5 V logic but requires checking input thresholds, output levels, and timing against the connected microcontroller or UART. The integrated converters generate the bipolar voltage required by RS-232 drivers without a separate negative supply. Typical uses include industrial serial consoles, instrumentation links, data acquisition equipment, service ports, and legacy peripheral connectivity. A microcontroller UART connects to the logic-side pins, while the RS-232 pins connect through the board’s DB9 or other physical connector. Designers should verify cable length, grounding, data direction, and connector pin assignment before production. A key design consideration is to place charge-pump capacitors close to their marked pins and provide a suitable return path for RS-232 current. Do not substitute negative logic or change connector wiring without reviewing the UART protocol. Verify propagation delay and slew-rate limits against the required baud rate, especially when long cables or slow edge rates are involved. This page consolidates verified family specifications, distributor identity, package details, application guidance, and availability checks into one engineering-focused reference. Pricing and lifecycle statements remain qualified because verified quantity pricing, manufacturer lifecycle status, and complete pin mapping were not supplied.

RFQ پەیوەندی
ADM207ANZ - 5/3 RS-232 Transceiver | Analog Devices
ADM207ANZ

ADM207ANZ - 5/3 RS-232 Transceiver | Analog Devices

Analog Devices ADM207ANZ is a 5-driver, 3-receiver RS-232 transceiver operating from a single +5 V supply, with 200 kbps signaling capability in a 24-pin PDIP package. The device uses 0.1 µF charge-pump capacitors to generate the bipolar voltage required by RS-232 drivers, allowing EIA-232-E and CCITT V.28 communication links without external ±12 V power rails. An RS-232 transceiver is an interface integrated circuit that combines line drivers and line receivers for serial data communication. The drivers convert logic-level signals into RS-232-compatible levels, while the receivers convert incoming bipolar signals into CMOS logic levels. The ADM2xx family is intended for data links where ±12 V is unavailable, making the ADM207ANZ suitable for industrial control, instrumentation, point-of-sale equipment, and legacy peripheral interfaces. The ADM207ANZ provides five transmit channels and three receive channels, allowing several RS-232 signals to share one interface component. Its CMOS implementation operates from +5 V and uses 0.1 µF capacitors for the internal charge-pump circuit. A maximum data rate of 200 kbps supports moderate-speed serial links, while the five-driver configuration can serve clock, control, and data lines in multidrop-style point-to-point equipment arrangements. The 24-pin PDIP package provides through-hole mounting and generous spacing between pins, which can simplify inspection and prototype rework. Because it is a single-supply RS-232 interface, the ADM207ANZ is particularly useful when the host logic operates from 5 V and the connected equipment implements the physical RS-232 voltage interface rather than a differential RS-485 or RS-422 bus. The receiver and driver arrangement should be checked against the required signal direction of each cable. Typical applications include industrial serial controllers, laboratory instruments, barcode and point-of-sale terminals, embedded service interfaces, and communication links between older RS-232 peripherals and modern control boards. The five transmit channels are useful when a system requires bidirectional data plus hardware-control lines without allocating a separate driver IC for every signal. The principal design consideration is external capacitor placement. Place the two 0.1 µF charge-pump capacitors close to their specified pins and follow the manufacturer’s polarity and connection diagram. Confirm that the selected cable uses RS-232 signal and ground conductors correctly, and do not expose the interface to voltages outside the device’s stated operating limits. This page organizes the ADM207ANZ’s interface capability, application fit, package details, verified commercial sources, and replacement limitations into a concise engineering reference. Because drop-in substitutions must preserve the 24-pin PDIP footprint and channel functions, any replacement should be checked against the manufacturer pinout and electrical tables before PCB release.

RFQ پەیوەندی
ADM207AR - 5/3 RS-232 Transceiver, 200 kb/s | Analog Devices
ADM207AR

ADM207AR - 5/3 RS-232 Transceiver, 200 kb/s | Analog Devices

The Analog Devices ADM207AR is a +5 V powered CMOS RS-232 transceiver with five drivers, three receivers, 200 kb/s data rate, and a 24-pin SOIC package. It uses 0.1 µF charge-pump capacitors and is designed for EIA-232-E and V.28 interfaces when ±12 V supplies are unavailable. An RS-232 transceiver is an interface IC that combines line drivers, receivers, and charge-pump voltage-boost circuitry. It translates logic-level UART signals between a host and a noisy, differential-distance serial link. The ADM207AR belongs to the RS-232 transceiver class within interface ICs and supports the asymmetric voltage levels required by legacy serial communications. The verified feature data identifies five transmitters, three receivers, a +5 V supply, 0.1 µF capacitors, 120 kb/s in one secondary source and 200 kb/s in the Analog Devices product listing. It also reports a 9 V output swing from a +5 V supply, 15 mW low power, low-power shutdown, 30 V receiver input levels, latch-up protection, and plug-in compatibility with MAX205 through MAX213. Exact operating limits not present in the supplied data are marked for verification rather than guessed. The charge-pump topology generates the bipolar voltage needed by RS-232 drivers from a single +5 V rail. This reduces system power-supply complexity, but external capacitor selection, layout, and signal-return continuity remain critical. Five driver channels permit multi-drop or multi-port RS-232 links, while three receiver channels provide simultaneous receive monitoring or handshake support. Typical applications include industrial control equipment, data acquisition systems, instrumentation, barcode or serial adapters, legacy peripheral ports, and embedded controller links. The device is appropriate when the system already uses RS-232 logic levels and must interoperate with existing equipment rather than modern differential buses such as RS-485. For a new PCB, verify the complete 24-pin pinout, capacitor values, driver and receiver loading, and maximum cable length against the current manufacturer datasheet. Keep charge-pump traces short, place capacitors close to their associated pins, and provide a continuous ground return between communicating systems. This page combines the supplied manufacturer and distributor findings with practical interface-selection guidance. It explicitly separates verified facts from unavailable parameters, so procurement and design decisions can be checked against the authoritative ADM207 datasheet before release to production.

RFQ پەیوەندی
ADM207ARS - 5V RS-232 Transceiver IC | Analog Devices
ADM207ARS

ADM207ARS - 5V RS-232 Transceiver IC | Analog Devices

Analog Devices ADM207ARS is a +5 V powered CMOS RS-232 line-driver and receiver IC with five drivers, three receivers, a 120 kbit/s data rate, and a 24-lead SSOP package. It is designed for EIA-232-E and V.28 serial interfaces where conventional ±12 V supplies are unavailable or undesirable. An RS-232 transceiver is an interface IC that combines digital line drivers and receivers on a single integrated circuit. Drivers convert logic-level signals into RS-232-compatible voltage levels, while receivers convert bipolar serial signals back into digital logic levels. The ADM2xx family therefore sits between a host controller or data-processing system and an RS-232 port. Its single +5 V supply operation simplifies system power design while retaining compatibility with established RS-232 equipment. Key features include operation from a +5 V supply, support for 0.1 µF charge-pump capacitors, a 120 kbit/s data rate, nine-volt output swing, and two active receivers for data-bus applications. The device also features low-power operation and a low-power shutdown function. Its CMOS implementation is intended to reduce power consumption compared with older bipolar RS-232 interface families. The ADM207ARS combines five transmit channels with three receive channels, making it useful for RS-232 designs that require more driver outputs than receiver inputs. This arrangement can support multi-drop or multi-peripheral arrangements in which one controller connects to several peripherals, provided the system designer observes the applicable RS-232 topology and drive-load constraints. The 120 kbit/s maximum data rate supports moderate-speed serial links rather than high-speed differential communications. Typical uses include industrial equipment interfaces, instrumentation links, service-console ports, embedded control systems, and legacy peripheral connectivity. A single +5 V rail simplifies portable and compact industrial designs, while the SSOP package supports surface-mount assembly. The on-board charge-pump circuitry generates the positive and negative voltage levels needed by the drivers, subject to correct external capacitor placement and the voltage limits specified by the manufacturer. For a new layout, place the charge-pump capacitors and receiver bypass capacitor close to their associated pins, route RS-232 traces away from sensitive analog and high-speed digital nodes, and observe the supply and ground-return requirements of the interface. Confirm signal polarity, driver direction, and connector pin assignments for each peripheral before finalizing the PCB because RS-232 implementations can differ even when both endpoints use standard transceivers.

RFQ پەیوەندی
ADM207ARSZ - 5V 5/3 RS-232 Transceiver | Analog Devices
ADM207ARSZ

ADM207ARSZ - 5V 5/3 RS-232 Transceiver | Analog Devices

The Analog Devices ADM207ARSZ is a 5 V powered CMOS RS-232 transceiver with five drivers and three receivers, operating at up to 200 kbps in a 24-lead SSOP package. It supports EIA-232-E and V.28 interfaces where ±12 V supplies are unavailable. The device accepts charge-pump capacitor values from 0.1 µF to 10 µF and produces approximately ±9 V output swing from a single 5 V supply. An RS-232 transceiver is an interface circuit that combines digital line drivers and receivers for serial communication using EIA-232 signaling. It belongs to the interface-IC hierarchy, where transceiver functions bridge a CMOS or TTL logic system and a differential, bipolar-voltage communications network. ADM2xx devices are designed for RS-232 links in industrial equipment, computers, instrumentation, and embedded control systems. The five-driver and three-receiver configuration supports multiple serial ports or asymmetric data paths in one package. Its 200 kbps capability is suitable for short-distance serial links, while the integrated charge-pump circuitry eliminates the need for a separate ±12 V power source. According to the Analog Devices ADM207 product page, the ADM207 supports 5 V operation and 0.1 µF external charge-pump capacitors. The ADM207 family uses CMOS drivers and receivers to provide low-power RS-232 operation. The manufacturer lists low power at 15 mW, approximately ±9 V output swing, and compatibility with the MAX206 through MAX211 and MAX213 families. Unlike designs requiring a negative supply, this transceiver derives positive and negative RS-232 levels internally, simplifying system power architecture while adding external charge-pump capacitors. Typical uses include industrial serial controllers, test equipment, data acquisition systems, POS terminals, and embedded instruments. The three receivers can monitor handshake, status, or acknowledgment lines, while the five drivers support multiple outgoing RS-232 channels. Systems with a strict 24-SSOP footprint and up to 200 kbps operation can use the ADM207ARSZ without changing their existing interface layout. Designers should follow the Analog Devices datasheet for charge-pump capacitor selection, layout, and logic-level compatibility. Keep charge-pump traces short, place their capacitors close to the designated pins, and use the manufacturer-recommended bypass capacitance at the 5 V supply. Confirm receiver thresholds for the external logic family and account for the propagation delay and slew behavior of the selected data rate. This product page combines the ADM207 family specifications, package and ordering information, drop-in comparison details, and practical interface-design guidance. The resulting engineering reference helps designers evaluate the ADM207ARSZ for compact 5 V RS-232 designs while identifying the exact differences that matter when reviewing an alternative.

RFQ پەیوەندی
ADM207ARZ - 5/3 RS-232 Transceiver, 200 kbps | Analog Devices
ADM207ARZ

ADM207ARZ - 5/3 RS-232 Transceiver, 200 kbps | Analog Devices

The Analog Devices ADM207ARZ is a 5 V powered CMOS RS-232 transceiver with five drivers, three receivers, a 200 kbps data rate, and onboard charge-pump voltage conversion in a 24-pin wide SOIC package. It requires 0.1 µF charge-pump capacitors and operates from a single 4.5 V to 5.5 V supply, producing the bipolar voltage swings required by EIA-232-E and V.28 interfaces. The ADM207 family is intended for communications systems where conventional ±12 V RS-232 supplies are unavailable. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 line levels and converts received line levels back into digital logic. This device belongs to the line-driver and receiver category, which forms part of the broader interface IC and semiconductor hierarchy. Unlike a standalone RS-232 driver or receiver, the ADM207ARZ combines both functions and its regulated charge-pump circuitry on one integrated circuit. The ADM207ARZ provides five transmit channels and three receive channels, allowing three bidirectional ports plus two transmit-only outputs. Its maximum signaling rate of 200 kbps supports common asynchronous serial data links while requiring only a 0.1 µF external capacitor for its on-chip voltage converters. The 5 V supply architecture simplifies system design because designers do not need a separate ±12 V source. Technically, the integrated DC-to-DC converters generate positive and negative RS-232 voltage levels from the single low-voltage supply. The receivers provide noise immunity for the ±3 V logic used by many microcontrollers and programmable controllers. Although the ADM207 lacks the low-power shutdown feature associated with some related ADM2xx devices, it remains suitable for multiport industrial, instrumentation, test-equipment, and embedded-control interfaces where several RS-232 channels are required. Typical applications include data acquisition systems, industrial controllers, laboratory instruments, point-of-sale equipment, barcode scanners, and embedded serial-port interfaces. A system designer can connect its logic-side transmitter inputs and receiver outputs directly to a suitable microcontroller UART, while the RS-232-side pins connect through the external charge-pump capacitors and protection network. The wide SOIC package is easy to assemble and available in production packaging. When laying out the board, place the 0.1 µF charge-pump capacitors close to their specified pins and route the high-voltage RS-232 outputs away from sensitive logic. Decoupling and external protection must follow the manufacturer application guidance because long cables expose the interface to electrostatic discharge and surge events. The supply must remain within the verified 4.5 V to 5.5 V range. This page consolidates verified manufacturer and distributor information, package-specific sourcing details, application guidance, and a transparent assessment of available drop-in alternatives. It also separates documented capabilities from unavailable electrical details instead of estimating missing specifications.

RFQ پەیوەندی
ADM207EAN - 5/3 RS-232 Transceiver, 230kbps | Analog Devices
ADM207EAN

ADM207EAN - 5/3 RS-232 Transceiver, 230kbps | Analog Devices

The Analog Devices ADM207EAN is a 5-driver, 3-receiver RS-232 transceiver rated for data rates up to 230 kbps and supplied in a 24-pin PDIP package. The device combines five RS-232 line drivers and three receivers in one integrated circuit, providing a practical interface between TTL/CMOS logic and unbalanced RS-232 links. Its documented protection features include ±15 kV ESD protection, electromagnetic-immunity compliance, and low EMI emissions. An RS-232 transceiver is an interface IC that translates between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. Within the broader electronics hierarchy, it belongs to the interface-controller family and connects digital systems to communication ports. A multi-driver and multi-receiver device can consolidate several serial channels onto one printed circuit board while reducing the number of separate line-driver packages. The ADM207EAN provides five drivers and three receivers, operates at data rates up to 230 kbps, and conforms to the EIA-232E and CCITT V.28 specifications. These characteristics make it suitable for industrial data acquisition, test equipment, point-of-sale terminals, computer peripherals, and embedded control systems. The three receivers are useful for acknowledging handshakes, receiving status signals, or supporting a multidrop arrangement in which several line-driver outputs feed one receiver. Its integrated protection reduces the need for separate TransZorb devices on exposed serial lines. The documented immunity targets include 8 kV contact discharge, 15 kV air-gap discharge, 15 kV human-body-model ESD protection, and fast-transient-burst immunity under IEC 1000-4-4. Low EMI emissions under EN 55022 are also listed, helping simplify compliance planning for equipment connected to external RS-232 cables. Typical installations include multi-port industrial controllers, laboratory interfaces, serial concentrators, and legacy peripheral equipment. In these systems, each TTL/CMOS-side channel connects to a host processor, while the corresponding driver output or receiver input connects to the external RS-232 port. The 230 kbps maximum rate supports substantially faster operation than the traditional 20 kbps RS-232 limit, although cable length, capacitance, grounding, and driver slew behavior must still be considered. A critical layout practice is to keep the transceiver close to the connector and route protected cable-side traces directly to the appropriate pins. Place bypass capacitors near the supply pins, maintain a low-impedance ground reference between the interface and the system, and avoid sharing narrow return paths with sensitive analog signals. The external RS-232 connector should also satisfy applicable product-level ESD and EMC requirements. This product page combines the manufacturer’s device specifications, interface-family positioning, application guidance, pin and package constraints, and strict drop-in comparison criteria. It also highlights the practical limitations of package variants and functionally similar transceivers so engineers can distinguish a true board-level replacement from a merely similar RS-232 device.

RFQ پەیوەندی
ADM207EANZ - 230 kbps RS-232 Transceiver | Analog Devices
ADM207EANZ

ADM207EANZ - 230 kbps RS-232 Transceiver | Analog Devices

The Analog Devices ADM207EANZ is a single-chip RS-232 interface transceiver with five transmitters, three receivers, and operation from a single +5 V supply. It supports data rates up to 230 kbps, conforms to the EIA-232E and CCITT V.28 specifications, and is packaged in a 24-pin PDIP. The ADM207E family is designed for robust communications interfaces where modern ±12 V supplies are unavailable. An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible logic. Within the product hierarchy, it belongs to interface ICs, communication transceivers, and RS-232 line-interface devices. This combination of drivers, receivers, and single-supply operation simplifies equipment requiring bidirectional serial connectivity over longer distances than a logic-level UART alone can support. The ADM207EANZ provides five driver channels for transmitting data and three receiver channels for receiving data. Its maximum specified data rate of 230 kbps accommodates industrial serial links, point-of-sale equipment, test systems, and legacy peripheral interfaces. Operation from one +5 V supply reduces external power requirements, while CMOS implementation supports integration with digital control logic. The ADM207E product family also provides Shutdown and Enable controls on selected models. The 24-pin PDIP package supports through-hole PCB assembly and is useful where field replacement, socketed construction, or repairability is important. The five-transmitter, three-receiver arrangement differs from many RS-232 transceivers that provide only one driver and one receiver, allowing several ports to share one interface package. Conversely, designs requiring four receivers should check whether the ADM208EANZ configuration better matches the channel count. Typical uses include industrial control consoles, laboratory instrumentation, data acquisition equipment, serial adapters, and embedded systems communicating with legacy RS-232 peripherals. Because EIA-232E and CCITT V.28 behavior define the electrical interface, board-level implementation still requires careful treatment of ground references, cable routing, protection, and logic-level compatibility with the connected UART. The most important design check is channel allocation. Five drivers and three receivers must be mapped against the required DTE or DCE signals before placement. Keep the transceiver and connector grounds together where required, route exposed interface leads away from sensitive logic, and use suitable protection components when cables leave the enclosure or connect to industrial equipment. This page combines the manufacturer's family specifications with package details, sourced pricing, channel-level comparisons, and practical RS-232 design guidance. It also distinguishes true same-package alternatives from configuration changes that may require different signal assignments, helping engineers evaluate replacement choices before modifying an existing board.

RFQ پەیوەندی
ADM207EAR - 5/3 RS-232 Transceiver | Analog Devices
ADM207EAR

ADM207EAR - 5/3 RS-232 Transceiver | Analog Devices

Analog Devices ADM207EAR is a five-driver, three-receiver RS-232 interface transceiver operating from a single 5 V supply in a 24-lead SOIC package. The device supports data rates up to 230 kbps and conforms to the EIA-232E and CCITT V.28 specifications, making it suitable for robust point-to-point serial links. Its five transmit channels allow multiple outputs where required, while three receive channels support bidirectional and multi-drop-style RS-232 connections. An RS-232 transceiver is an interface IC that converts between digital logic levels and the voltage levels used by RS-232 serial links. The driver stage boosts logic signals to RS-232 levels, while the receiver stage restores transmitted data to logic-compatible levels. Within the broader hierarchy, an RS-232 transceiver is a line interface, a communications interface IC, and ultimately a semiconductor for data acquisition, control, and industrial communication systems. Key characteristics include operation from a single 5 V power supply, five drivers, three receivers, and a maximum data rate of 230 kbps. The ADM207EAR family also incorporates ESD protection on the RS-232 pins, with a listed protection level of ±15 kV. These features support reliable operation in electrically noisy environments where cables, connectors, and external equipment can expose the interface to electrostatic discharge events. The ADM207E family is designed for robust RS-232 and V.28 interface equipment. Its combination of multiple driver outputs, multiple receiver inputs, and a single 5 V rail allows one transceiver to support several signal directions or peripheral connections. The family is backward compatible with earlier ADM2xx products, facilitating migration of established interface designs while retaining familiar RS-232 electrical behavior. Typical applications include industrial serial controllers, test and measurement equipment, computer peripherals, instrumentation, and point-to-point data links. In these systems, the device can translate between a host controller's CMOS/TTL logic and the higher voltage swings required by an RS-232 cable connection. The three receiver channels are useful when a design must monitor several return or status signals without adding separate receiver packages. PCB layout should preserve the device's intended package geometry, route each RS-232 line directly to its connector or protection network, and provide a stable low-impedance ground path. Because line-driver outputs and receiver inputs perform different functions, verify every connection against the manufacturer's pin-description table before final routing. Cable protection, chassis grounding, and transient-suppression components should be selected according to the connector exposure and required industrial immunity level. This product record combines the ADM207EAR's core electrical characteristics with practical interface-design guidance, pin-assignment cautions, application analysis, and same-footprint replacement information. It is intended to help engineers distinguish channel-count, package, and RS-232 functionality differences before making a PCB-compatible sourcing decision.

RFQ پەیوەندی
ADM207EARS - 5/3 RS-232 Transceiver | Analog Devices
ADM207EARS

ADM207EARS - 5/3 RS-232 Transceiver | Analog Devices

Analog Devices ADM207EARS is a 5-driver, 3-receiver RS-232 transceiver operating from a single 5 V supply at rates up to 230 kbps, and it is packaged in a 24-pin SSOP. The ADM2xxE interface family targets EIA-232E and CCITT V.28 equipment where external ±12 V rails are unavailable. An RS-232 transceiver combines line drivers and line receivers on one integrated circuit. Digital logic-side signals enter the receivers and leave the drivers, while the external RS-232 ports use bipolar voltage signaling. The ADM207EARS therefore serves as the interface between low-voltage CMOS equipment and a physical RS-232 connection. It belongs to the RS-232 transceiver hierarchy alongside line drivers, line receivers, and multi-driver interface ICs. Five driver channels allow one controller to connect to five external RS-232 ports, while three receiver channels can monitor three incoming data lines. Operation from a single 5 V supply simplifies system power design, and the specified 0.1 µF charge-pump capacitor requirement reduces external power-supply complexity. The device supports data rates to 230 kbps and is designed for robust communications interfaces. The ADM207E family is intended for EIA-232E and CCITT V.28 signaling applications. According to the Analog Devices product page, it is suitable for harsh electrical environments and includes ESD protection rated at ±15 kV. These protections are important when equipment cables connect to user-accessible ports, where electrostatic discharge and transient events can otherwise damage the interface IC. Typical uses include industrial serial-control equipment, data acquisition systems, instrumentation, POS terminals, and communications adapters. The five transmitters are useful in multiport controller designs, while the three receivers support status, handshake, or acknowledgment inputs. The 230 kbps maximum data rate supports legacy synchronous and asynchronous RS-232 links used in industrial control, test equipment, and embedded systems. Layout should preserve short charge-pump paths and return the charge-pump capacitor close to the device. RS-232 driver outputs should also be isolated from sensitive analog inputs, and external protection may be needed for long cables or severe industrial transients. Confirm connector-level signaling and grounding before treating a logic-level UART connection as a complete RS-232 interface. This page combines the manufacturer interface specifications, exact package and channel information, sourcing guidance, and a practical comparison with confirmed 24-SSOP alternatives. It also highlights the design checks that matter when replacing a multi-channel RS-232 transceiver without changing the PCB footprint.

RFQ پەیوەندی
ADM207EARU - 5/3 RS-232 Transceiver, 230kbps | Analog Devices
ADM207EARU

ADM207EARU - 5/3 RS-232 Transceiver, 230kbps | Analog Devices

The Analog Devices ADM207EARU is a 5/3 RS-232 line-driver and receiver transceiver operating from a single +5 V supply at data rates up to 230 kbps. It provides five transmit channels and three receive channels in a 24-pin TSSOP package. The device conforms to the EIA-232E and CCITT V.28 specifications, and its EMI/EMC-compliant design targets industrial communication equipment exposed to electrostatic discharge and conducted or radiated interference. An RS-232 transceiver is an interface IC that converts a host’s logic-level UART signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. In the broader hierarchy, it belongs to the RS-232 interface transceiver class, within interface ICs and data-conversion semiconductors. This bidirectional level-shifting function allows equipment such as test systems, industrial controllers, and data-acquisition equipment to communicate with longer-distance RS-232 peripherals. The ADM207EARU combines three principal protection and compatibility features. Its five-driver, three-receiver arrangement supports asymmetric point-to-point links, while its +5 V single-supply operation simplifies system power design. The manufacturer describes the family as compliant with EIA-232E and CCITT V.28, operating up to 230 kbps, and providing ±15 kV ESD protection. These characteristics are particularly useful when exposed cables and connector interfaces can introduce electrostatic discharge into an equipment chassis. Technically, the transceiver provides separate logic-side inputs and outputs so the attached UART remains electrically isolated from the RS-232 line interface. A multi-channel device reduces the number of interface ICs required when one system must connect multiple serial peripherals. The 24-pin TSSOP package is a surface-mount option that supports compact board layouts, while the tube packaging identified for the ADM207EARU ordering code is intended for automated production handling. Verify the final exposed-pad, layout, and decoupling recommendations in the manufacturer datasheet before releasing a PCB. Typical uses include industrial serial controllers, laboratory test equipment, point-of-sale systems, service interfaces, and embedded systems that retain an RS-232 connection. A modem-style connection is one common arrangement, but the part can also implement custom point-to-point links. Designers should confirm signal polarity, connector pin assignment, whether the host UART uses 5 V logic, and the required data rate before assigning driver and receiver channels. For a robust implementation, place the transceiver close to the RS-232 connector, route driver and receiver traces away from sensitive clock or measurement paths, and connect the supply bypass capacitor as directed by the manufacturer layout guidance. External protection may still be appropriate when the cable leaves an enclosure, but it should be selected without loading the driver outputs. Keep the ground reference consistent between the equipment and connected RS-232 equipment. This page combines device specifications, interface-selection guidance, application-specific implementation advice, and clearly qualified replacement information. It is intended to help engineers verify electrical compatibility, footprint matching, protection requirements, and system-level RS-232 behavior before incorporating the ADM207EARU into a new design.

RFQ پەیوەندی
ADM207EARZ - 5V 230kbps 5/3 RS-232 Transceiver | Analog Devices
ADM207EARZ

ADM207EARZ - 5V 230kbps 5/3 RS-232 Transceiver | Analog Devices

The Analog Devices ADM207EARZ is a 5V RS-232 transceiver with five drivers and three receivers, operating at data rates up to 230 kbps in a 24-pin SOIC package. The device provides bidirectional RS-232 interface conversion for industrial, communications, and instrumentation equipment while operating from a single +5V supply. An RS-232 transceiver is an interface IC that translates digital logic levels into RS-232 line levels and converts received line-level signals back into logic-level outputs. The ADM207E family belongs to the RS-232 interface transceiver hierarchy, which connects TTL or CMOS-compatible equipment to the voltage levels, impedance, and signaling characteristics of EIA-232E and CCITT V.28 links. The principal features of the ADM207EARZ include five driver channels, three receiver channels, operation from a single 5V supply, and support for data rates up to 230 kbps. According to the Analog Devices ADM207E product page, the devices fully conform to the EIA-232E and CCITT V.28 specifications. Some members of the family also provide shutdown or enable controls, although individual control availability must be confirmed for the selected ordering code. The multi-channel architecture allows one package to serve several point-to-point or multidrop RS-232 connections. Five drivers support outbound data or control signaling, while three receivers support inbound data and status signals. This channel balance is useful in equipment that must aggregate several serial links without requiring one separate transceiver package for every direction. Typical uses include industrial serial controllers, test and measurement instruments, point-of-sale equipment, data acquisition systems, and external communication ports. The 24-pin SOIC package is readily handled by conventional surface-mount assembly and allows a compact interface section on a larger mixed-signal or control board. PCB design should preserve the RS-232 interface as a distinct high-voltage, high-current domain rather than routing transceiver outputs through sensitive analog signals. Place the device close to the DB connector, maintain the required separation from unrelated circuitry, and follow the manufacturer pin and layout guidance when assigning protection components. This page combines the ADM207E family specifications, ordering-code information, interface-family alternatives, and practical design considerations to support component selection, footprint review, and PCB implementation. The exact complete pin assignment and application circuit details should be checked in the manufacturer datasheet before schematic release.

RFQ پەیوەندی
ADM208AN - 4/4 RS-232 Transceiver, 5V, 24-PDIP | Analog Devices
ADM208AN

ADM208AN - 4/4 RS-232 Transceiver, 5V, 24-PDIP | Analog Devices

The Analog Devices ADM208AN is a +5 V powered CMOS RS-232 transceiver with four drivers and four receivers, a 120 kbit/s data rate, and a 24-pin PDIP package. It is designed for EIA-232-E and V.28 communications interfaces where ±12 V supplies are unavailable. The verified product information identifies a 0.1 µF charge-pump requirement, 9 V output swing from a +5 V supply, 30 V receiver input levels, and low-power operation. An RS-232 transceiver is an interface IC that combines differential line drivers and receivers for point-to-point serial communication. In the broader electronics hierarchy, it belongs to interface ICs and communications transceivers rather than power-management or logic devices. The ADM2xx family translates between low-voltage digital logic levels and the voltage levels used by RS-232 links, while internal charge-pump circuitry generates the required negative transceiver voltage. Key features include four drivers, four receivers, 120 kbit/s operation from a single +5 V supply, and 9 V output swing. The receiver supports 30 V input levels according to the supplied manufacturer-related snippets. The device is intended for RS-232 links that must tolerate the electrical environment of the EIA-232-E or V.28 standards while avoiding external ±12 V rails. Low-power shutdown and receiver behavior vary by family member, so the exact ADM208AN functions must be verified against its datasheet during design-in. The ADM208AN uses CMOS drivers and receivers to interface a host UART, microcomputer, or data-acquisition system with an RS-232 cable. Its 120 kbit/s rate is suitable for conventional serial equipment, configuration links, instrumentation, and industrial control links that do not require higher data rates. The 24-pin PDIP package favors through-hole assembly and legacy industrial equipment rather than compact surface-mount designs. A primary design consideration is ensuring that the external charge-pump capacitors, supply decoupling, grounding, and cable-side protection meet the requirements in the manufacturer datasheet. Because RS-232 is a single-ended, unbalanced interface, cable routing and grounding can affect noise immunity. Do not infer an ESD rating, temperature range, or package dimensions that are not stated in the verified data. This page consolidates verified manufacturer and distributor information, comparison-ready attributes, and practical RS-232 integration guidance. It distinguishes published facts from parameters requiring verification and is intended to support engineering selection before purchasing the ADM208AN.

RFQ پەیوەندی