بەرهەمەکان (5,100+)

ADM213EARSZ - 5V 4/5 RS-232 Transceiver | Analog Devices
ADM213EARSZ

ADM213EARSZ - 5V 4/5 RS-232 Transceiver | Analog Devices

The Analog Devices ADM213EARSZ is a single-supply RS-232 and V.28 transceiver with four drivers, five receivers, a 5 V supply input, and a 200 kbps data rate in a 28-pin SSOP package. It combines bidirectional RS-232 interface functions with shutdown and enable control while maintaining two receivers active during shutdown. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into digital logic. The RS-232 transceiver category belongs to the broader interface IC hierarchy, where line drivers and receivers bridge modern digital electronics with older point-to-point serial equipment. The ADM2xx family is intended for EIA-232-E and V.28 communication interfaces, particularly where a single 5 V supply is available. The ADM213E integrates four drivers and five receivers, giving it more receivers than drivers. It operates from one +5 V supply, supports data rates up to 200 kbps, and uses 0.1 µF charge-pump capacitors according to the manufacturer product information. Its shutdown and enable pins provide power-management flexibility, while two receiver outputs remain active in shutdown for selected monitoring applications. The ADM213E family is positioned for harsh electrical environments and includes EMC-focused interface protection. The device converts CMOS/TTL-compatible logic to RS-232 levels and performs the inverse conversion on the receive side. Its mixed driver/receiver configuration supports equipment in which multiple status or handshake signals must be monitored but only a smaller number of channels require transmission. Typical uses include industrial serial controllers, instrumentation equipment, point-to-point data links, and legacy peripheral interfaces. The five receiver channels are useful for reading multiple control or status lines, while four drivers cover common RS-232 transmit assignments. In a shutdown sequence, selected receive paths can continue monitoring the bus, reducing dependence on complete power removal. PCB design should follow the manufacturer pin and capacitor-placement instructions because incorrect charge-pump capacitor connections can prevent correct operation. Keep RS-232 driver outputs away from sensitive low-level analog traces, provide an uninterrupted ground return, and avoid long unprotected branches that increase capacitive loading on the cable. This page combines device specifications, source-backed commercial guidance, drop-in alternatives, comparison parameters, and practical PCB and power-management notes. It also identifies where pin-level and certification details require consultation of the current Analog Devices documentation before layout release.

RFQ پەیوەندی
ADM213EARUZ - 4/5 RS-232 Transceiver | Analog Devices
ADM213EARUZ

ADM213EARUZ - 4/5 RS-232 Transceiver | Analog Devices

The Analog Devices ADM213EARUZ is a +5 V RS-232 transceiver with four drivers, five receivers, full-duplex operation, and a 28-pin TSSOP package. The manufacturer identifies a 200 kbps operating rate, 0.1 µF charge-pump capacitors, shutdown and enable pins, and two receivers that remain active during shutdown. These characteristics place the device within the RS-232 interface IC hierarchy, where a transceiver converts between TTL-compatible logic levels and differential, bipolar RS-232 signal levels. An RS-232 transceiver is an interface IC that combines line drivers and line receivers on one die. The ADM213EARUZ is designed for EIA-232-E and V.28 links where a +12 V supply is unavailable. Its four-driver and five-receiver arrangement supports multi-channel equipment links, while the full-duplex architecture permits command responses and status data to travel concurrently over separate signal pairs. Key features include operation from a single +5 V supply, a 200 kbps data rate, and integrated charge-pump support using 0.1 µF capacitors. The shutdown and enable controls support power management, and two receiver outputs remain active in shutdown mode for monitoring selected lines. The 28-pin TSSOP package also provides a compact surface-mount footprint for industrial control, instrumentation, and embedded serial-port equipment. Technically, the ADM213EARUZ belongs to Analog Devices' ADM2xx family of robust RS-232 and V.28 interface devices. The manufacturer states that the family is intended for electrical environments where 12 V is unavailable and notes compliance with the EU EMC directive identified as 89/336/EEC. Its integrated drivers and receivers reduce the number of external components required for a multi-channel interface while centralizing polarity and signal-level conversion. Typical uses include industrial control panels, test and measurement instruments, barcode and serial equipment, embedded controllers, and data-acquisition systems. A four-driver link can control four downstream channels, while five receivers can monitor remote equipment status, fault lines, and command acknowledgements. The 200 kbps rate is appropriate for legacy serial-console, point-to-point, and industrial instrumentation links that do not require modern high-speed differential buses. Place the required charge-pump capacitors close to their associated device pins and maintain symmetric signal routing where possible. Confirm logic-level compatibility, connector pin assignment, and cable length before deployment, because the +5 V interface describes the transceiver supply rather than the RS-232 driver voltage amplitude. The shutdown function should not be used as a substitute for galvanic isolation or surge protection. This page combines the manufacturer's functional description with practical interface-selection guidance, verified source links, a pin-compatible tape-and-reel option, and engineering notes covering power, layout, and signal integrity.

RFQ پەیوەندی
ADM213EARZ - 4/5 5V RS-232 Transceiver | Analog Devices
ADM213EARZ

ADM213EARZ - 4/5 5V RS-232 Transceiver | Analog Devices

Analog Devices ADM213EARZ is a 4-driver, 5-receiver RS-232 and V.28 line transceiver operating from a single 5 V supply in a 28-pin SOIC package. The ADM213E family supports data rates up to 230 kbps, provides shutdown and enable controls on selected products, and is designed for communication interfaces exposed to severe electrical environments. An RS-232 transceiver is an interface IC that combines line drivers and line receivers on one chip. EIA-232 and V.28 signaling converts between low-voltage logic levels and the bipolar voltage levels used by RS-232 equipment. In the signal-chain hierarchy, this device belongs to the RS-232 interface IC family, performs logic-level conversion, and serves as the physical communication layer between digital equipment and a serial port. The ADM213E family includes four RS-232 drivers and five receivers, with two receivers remaining active during shutdown. Its enhanced electrical protection includes ±15 kV ESD protection, while the single 5 V operating supply simplifies system implementation. The ADM213E product family is also identified as compliant with applicable EIA-232E, CCITT V.28, and EU EMC requirements. The ADM213EARZ combines four transmit channels with five receive channels for multi-port RS-232 equipment. Its 230 kbps maximum data rate supports legacy serial communications, industrial control links, data-acquisition systems, and service interfaces. Shutdown capability can reduce power use when communication is inactive, while selected receiver channels remain operational for monitoring or wake functions. Typical uses include industrial serial-port expansion, instrumentation control, data-logger interfaces, board-to-board communication links, and equipment requiring multiple RS-232 channels. The 28-pin SOIC package allows a compact implementation, although careful treatment of driver outputs, receiver inputs, supply bypassing, and external protection is required in electrically harsh installations. Place the supply bypass capacitor close to the device and route each RS-232 driver output away from sensitive receiver and logic traces. Confirm that every connected cable meets the EIA-232E and V.28 limits, and use suitable protection when cables leave the equipment enclosure. Review shutdown-state receiver behavior before assigning pins in a multi-drop or monitoring system. This product record combines the manufacturer’s ADM213E technical description with application-oriented implementation guidance, practical interface considerations, and a structured comparison against pin-compatible RS-232 transceiver options. The Request a Quote form on this page supports purchasing, availability, and lead-time inquiries for the ADM213EARZ.

RFQ پەیوەندی
ADM2209EARU - Dual RS-232 Interface | Analog Devices
ADM2209EARU

ADM2209EARU - Dual RS-232 Interface | Analog Devices

The Analog Devices ADM2209EARU is a dual-port RS-232 interface transceiver containing six drivers and ten receivers in a 38-pin TSSOP package. It meets EIA-232 and V.28 specifications and integrates a DC-to-DC converter that generates the negative rail required by RS-232 drivers. This onboard charge-pump arrangement eliminates the need for an external negative power supply while supporting two complete RS-232 ports. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic levels. In the broader semiconductor hierarchy, the ADM2209EARU belongs to the RS-232 transceiver class, within interface ICs and communication semiconductors. Its combination of multiple drivers and receivers makes it useful where more than one serial channel must share a compact board area. The principal features of the ADM2209EARU are its six transmit drivers, ten receive inputs, dual-port integration, and onboard negative-rail converter. The device is designed for EIA-232 and V.28 operation according to the Analog Devices product description. Integrating the DC-to-DC converter reduces the external power-supply component count compared with an RS-232 implementation that requires both positive and negative supply rails. The ADM2209EARU combines three driver channels and five receiver channels per RS-232 port, producing a 6/10 transceiver configuration in a single 38-pin TSSOP. This channel density can simplify designs that require multiple serial interfaces for instrumentation, data acquisition, industrial control, or legacy peripheral connectivity. The converter also removes the need to distribute a system-generated negative voltage to the transceiver. Typical uses include dual-port data acquisition equipment, industrial serial interfaces, test and measurement instruments, and embedded systems that must communicate with legacy RS-232 peripherals. When using the device in a long or noisy cable environment, the board should still include the protection and signal-conditioning components recommended for the application rather than treating the interface IC as a complete surge-protection solution. PCB implementation requires careful assignment of the 38-pin TSSOP footprint and compliance with the Analog Devices pin-description table. Keep transceiver traces away from sensitive analog paths, connect the required supply bypassing close to the device, and provide adequate return paths for each interface channel. The integrated converter reduces external power complexity but does not eliminate the need for correct decoupling and layout discipline. This page combines the official Analog Devices product description, distributor identification of the exact ADM2209EARU package and configuration, and practical guidance for evaluating the device against closely related RS-232 interface options. The ADM2209EARUZ is the lead-free packaging designation associated with the same ADM2209E device family and is identified separately for sourcing comparisons.

RFQ پەیوەندی
ADM222AN - 200 kbps Dual RS-232 Transceiver | Analog Devices
ADM222AN

ADM222AN - 200 kbps Dual RS-232 Transceiver | Analog Devices

The Analog Devices ADM222AN is a high-speed, 5 V CMOS RS-232 transceiver with 2 drivers, 2 receivers, a 200 kbps data rate, and an 18-pin PDIP package. Its key interface ratings are 200 kbps, 5 V supply operation, and 2/2 transmit-receive channels, while the charge-pump subsystem develops bipolar RS-232 levels with only 0.1 µF external capacitors. According to the Analog Devices product page, the on-board DC-DC converters provide a 9 V output swing with the 5 V supply, and the receivers accept input voltages to 30 V. An RS-232 transceiver is an interface IC that combines line drivers and line receivers so digital logic can communicate across a noisy, ground-offset-prone serial link. Its hierarchy is RS-232 transceiver → serial interface transceiver → line-driver/receiver IC → interface semiconductor. The ADM222 belongs to the high-speed CMOS RS-232 family alongside ADM232A and ADM242, combining logic-level interfacing with the voltage conversion required by RS-232. The ADM222 provides 2 drivers and 2 receivers, enabling two simplex links or one full-duplex RS-232 port. Its 200 kbps transmission rate is substantially faster than conventional low-speed RS-232 links. A 5 V-only power architecture simplifies system supply design, while the external 0.1 µF charge-pump capacitors support generation of bipolar signal levels. The stated 9 V output swing provides the required positive and negative line-drive voltage. The receiver input rating extends to 30 V, providing useful transient and voltage-range margin when connected to external RS-232 equipment. The device also includes a shutdown pin, allowing the transceiver to reduce activity when the interface is not required. Exact propagation-delay, input-threshold, output-current, supply-current, and temperature values are not present in the supplied search data and therefore require confirmation from the manufacturer datasheet. Typical uses include industrial serial-control links, test equipment, instrumentation, data-acquisition systems, and legacy peripheral connections. In each case, the two receiver/driver channels can support bidirectional communication when TX and RX signals are crossed appropriately. The 200 kbps rate can also shorten transfer time compared with slower RS-232 implementations, provided the connected equipment, cable, and protocol support that throughput. For implementation, place the 0.1 µF charge-pump capacitors close to their designated pins and route RS-232 traces away from sensitive analog and clock signals. Confirm every unused input and output state, especially when placing the part between systems with different logic voltage levels. Do not infer an unqualified alternative from functional similarity; a true drop-in replacement must match the 18-pin footprint and pin functions. This page combines verified Analog Devices product information, distributor identification, sourcing links, and design-oriented RS-232 considerations. It distinguishes documented values from unavailable specifications and does not treat general functional equivalents as guaranteed pin-to-pin replacements.

RFQ پەیوەندی
ADM222ANZ - 200kbps RS-232 Transceiver | Analog Devices
ADM222ANZ

ADM222ANZ - 200kbps RS-232 Transceiver | Analog Devices

The Analog Devices ADM222ANZ is a 200 kbps RS-232 transceiver with two drivers, two receivers, a single 5 V supply, and a shutdown pin in an 18-lead plastic DIP package. Its 0.1 uF charge-pump capacitors generate the bipolar RS-232 voltage levels required by the EIA-232-E and V.28 interfaces without a separate negative supply. An RS-232 transceiver is an interface IC that combines digital logic-level transmitters and receivers with analog line-driver circuitry. The transmitter converts TTL or CMOS signals into RS-232 bipolar levels, while the receiver converts RS-232 levels back into logic-compatible signals. Within the interface hierarchy, the ADM222 belongs to the RS-232 transceiver family of interface ICs used to connect computer, industrial-control, and instrumentation equipment over short point-to-point links. The ADM222ANZ supports data rates up to 200 kbps from one 4.5 V to 5.5 V supply. Its two-driver, two-receiver configuration can support two data paths, such as one full-duplex channel and one additional unidirectional link, depending on the system wiring. The shutdown function disables the device to reduce supply current to 0.1 uA, making power management useful in portable or intermittently operated equipment. The integrated on-board DC-DC converter uses 0.1 uF external charge-pump capacitors to develop positive and negative RS-232 voltage levels. This architecture simplifies the power system because the device requires only one supply rail. Designers must still account for capacitor tolerance, ESR, wiring length, and the leakage and loading characteristics of the connected RS-232 network. Typical applications include legacy serial ports, industrial controllers, test equipment, data-acquisition systems, and service interfaces. The 18-lead plastic DIP package is useful for through-hole industrial and maintenance designs where socketed or leaded construction improves serviceability. The 7.62 mm lead pitch also permits compatibility with conventional perforated-board layouts. When laying out the circuit, place the charge-pump capacitors close to their specified pins and route RS-232 driver outputs away from sensitive receiver inputs. Confirm that the selected connector, cable, and remote equipment use compatible signal definitions and grounding practices. Where a modern design does not require legacy RS-232, an alternative interface such as USB or differential Ethernet may offer greater speed, cable distance, and noise immunity. This product page summarizes the ADM222ANZ operating characteristics, verified package information, application guidance, and replacement considerations. It also provides design-focused comparisons that help engineers assess supply voltage, signal count, data rate, shutdown behavior, and through-hole package requirements before committing a board layout.

RFQ پەیوەندی
ADM222AR - 200 kbps Dual RS-232 Transceiver | Analog Devices
ADM222AR

ADM222AR - 200 kbps Dual RS-232 Transceiver | Analog Devices

The Analog Devices ADM222AR is a 5 V CMOS RS-232 transceiver with two drivers, two receivers, a 200 kbps transmission rate, and shutdown control in an 18-SOIC package. It generates bipolar RS-232 levels from a single 5 V supply using 0.1 µF charge-pump capacitors. Key verified features include 9 V output swing, 30 V receiver input capability, EIA-232-E and V.28 compliance, and an on-board DC-DC converter. An RS-232 transceiver is the interface category that connects a CMOS or TTL-based digital system to the bipolar signal domain used by serial equipment. The RS-232 driver converts logic-level signals into positive and negative voltage levels, while the receiver converts those bipolar levels back into logic-compatible signals. The ADM222 belongs to the broader interface IC hierarchy and combines line drivers, line receivers, and charge-pump circuitry in one package. The ADM222AR provides two transmit channels and two receive channels, allowing bidirectional RS-232 links between two systems. Its 200 kbps data rate supports faster serial communication than many conventional RS-232 transceivers. The 0.1 µF charge-pump capacitors reduce external capacitance requirements, while the shutdown pin can reduce supply current to 0.1 µA according to the manufacturer product information. Its 5 V supply architecture simplifies integration with digital logic. The on-board DC-DC converter develops the positive and negative voltage levels needed for RS-232 transmission, while the 9 V output swing and 30 V receiver input range provide useful line-level margin. The device is identified as a 2/2 full RS-232 transceiver and is available in the 18-SOIC surface-mount package denoted by the DigiKey listing. Typical uses include RS-232 test equipment, instrumentation, industrial serial links, data acquisition systems, and legacy peripheral connections. Designers should verify the exact package pinout and line-level timing requirements in the Analog Devices datasheet before layout. Charge-pump capacitor placement and supply decoupling remain important because they influence output voltage generation and signal integrity. This page consolidates verified Analog Devices product information, distributor package details, technical feature data, and practical RS-232 design guidance. It also distinguishes the ADM222AR from functional alternatives by emphasizing the verified 18-SOIC package, 200 kbps rate, 5 V operation, and shutdown function.

RFQ پەیوەندی
ADM222ARZ - 2/2 RS-232 Transceiver 200kbps | Analog Devices
ADM222ARZ

ADM222ARZ - 2/2 RS-232 Transceiver 200kbps | Analog Devices

The ADM222ARZ is a high-speed, 5 V, 0.1 µF CMOS RS-232 transceiver from Analog Devices, featuring two drivers and two receivers in an 18-pin SOIC-W package. It operates from a single 5 V supply and uses an on-chip charge pump with small 0.1 µF external capacitors to generate RS-232 bipolar levels, achieving data rates up to 200 kbps. The device includes a shutdown (SHDN) pin that reduces supply current to 0.1 µA, making it ideal for power-sensitive portable applications. RS-232 transceivers are interface ICs that convert logic-level signals to RS-232 voltage levels for serial communication. They are part of the interface IC family, which also includes RS-485, CAN, and USB transceivers. The ADM222ARZ specifically provides the electrical signaling and protection required for legacy serial ports, enabling communication between microcontrollers and peripherals such as modems, GPS modules, and industrial equipment. Key features include a 200 kbps data rate, 0.1 µF charge pump capacitors, and a shutdown mode with 0.1 µA supply current. The device is fully compliant with EIA-232E standards and features a wide operating temperature range of -40°C to +85°C. The 18-pin SOIC-W package is suitable for space-constrained designs while providing adequate thermal performance. Technically, the ADM222ARZ uses a CMOS charge pump architecture to generate ±10 V RS-232 levels from a single 5 V supply. The internal charge pump requires only four external 0.1 µF capacitors, reducing board space and cost compared to older designs requiring larger capacitors. The receiver inputs tolerate up to ±30 V, providing robust protection against voltage spikes on the serial line. Typical applications include industrial automation, point-of-sale terminals, medical devices, and any system requiring reliable RS-232 communication. The shutdown feature is particularly useful in battery-powered devices where power conservation is critical. When designing with the ADM222ARZ, ensure that the charge pump capacitors are placed close to the V+ and V- pins to minimize noise and maintain proper voltage generation. The shutdown pin can be driven by a microcontroller GPIO to enter low-power mode when the serial port is idle.

RFQ پەیوەندی
ADM223ARS - 120kB/s 5V RS-232 Interface | Analog Devices
ADM223ARS

ADM223ARS - 120kB/s 5V RS-232 Interface | Analog Devices

The Analog Devices ADM223ARS is a +5 V powered CMOS RS-232 driver and receiver interface IC featuring four transmitters, five receivers, a 120 kB/s data rate, and a 28-pin SSOP package. Its integrated on-board DC-DC converters produce approximately 9 V output swing from a single 5 V supply, while small 1 F capacitors support a compact implementation. An RS-232 interface is a transceiver category that converts logic-level signals into RS-232-compatible levels and converts received RS-232 signals back into CMOS logic. The ADM223ARS belongs to the interface IC hierarchy, which includes RS-232 transceivers, line drivers, line receivers, and multi-channel interface controllers. These devices connect conventional microcontroller, processor, and instrumentation logic to cable-based serial ports using differential bipolar voltage signaling. Key features include operation from a single +5 V supply, compliance with the stated EIA-232-E and V.28 specifications, a maximum data rate of 120 kB/s, approximately 9 V transmitter output swing, and support for small 1 F charge-pump capacitors. A low-power shutdown function reduces consumption when the interface is not needed, while the receiver channels remain active during shutdown. The receivers also provide a stated 30 V input capability. The integrated DC-DC conversion architecture removes the need for a separate external 5 V-to-approximately 9 V supply rail. This simplifies board design and reduces the number of power-supply connections around the transceiver. Because charge-pump capacitors and high-voltage driver outputs are involved, placement and return-current management remain important even though the device operates internally from only 5 V. Typical applications include RS-232 ports in industrial control equipment, data-acquisition systems, instrumentation, embedded control systems, and legacy serial-port interfaces. The combination of five receiver channels and four driver channels is useful when a system needs additional receive-only status or handshake signals beyond the four conductors required for bidirectional communication. A critical design consideration is that the S suffix denotes the 28-pin SSOP package used by this ordering code, so board layout and pin count must be checked before substitution. Cable protection, ground continuity, and isolation should also be evaluated because RS-232 is a physical-layer standard rather than a guarantee of surge immunity. This page consolidates verified manufacturer and distributor information, interface specifications, sourcing data, and replacement constraints into an engineer-oriented resource. It also separates verified drop-in replacements from broader functional equivalents to avoid implying PCB compatibility that the available cross-reference evidence does not establish.

RFQ پەیوەندی
ADM230LAN - 5V Dual RS-232 Interface | Analog Devices
ADM230LAN

ADM230LAN - 5V Dual RS-232 Interface | Analog Devices

Analog Devices ADM230LAN is a 5 V powered CMOS RS-232 driver and receiver interface IC with a 120 kB/s data rate and integrated DC-DC converter, housed in a 14-pin PDIP package. It provides two RS-232 communication channels with approximately 9 V output swing from a single 5 V supply and is designed for systems that cannot provide separate positive and negative RS-232 supply rails. An RS-232 interface IC is a line-driver and line-receiver device that converts logic-level signals into voltage levels suitable for RS-232 communications. The RS-232 interface sits between a host or controller and an external data link, performing electrical conversion while protecting the transmitting and receiving circuitry from voltage differences on the cable. The ADM230LAN belongs to the CMOS interface-IC hierarchy and supports EIA-232-E and V.28 communication requirements. The principal features include operation from one 5 V supply, on-board DC-DC conversion, a 120 kB/s maximum data rate, 9 V output swing, small 1 F charge-pump capacitors, a low-power shutdown function, and receiver operation during shutdown. These characteristics make the device useful in systems that need full RS-232 levels without requiring the conventional plus-and-minus supply arrangement. The integrated DC-DC converter allows the transmitter circuitry to develop the bipolar voltage swing required by RS-232 while the device itself operates from a single 5 V rail. This simplifies system power architecture, although charge-pump capacitor selection, startup behavior, and output slew rate still require attention in high-speed or long-cable applications. The CMOS implementation supports the 120 kB/s signaling rate identified for this device family. Typical applications include point-of-sale terminals, serial instrumentation, industrial control equipment, data acquisition systems, and legacy peripheral interfaces. The ADM230LAN is particularly suitable when an embedded controller uses TTL or CMOS logic but the connected equipment requires an RS-232 port. It can also support bidirectional serial links when both sides of the interface are wired for communication rather than permanently configured as DTE or DCE. When laying out the circuit, place the charge-pump capacitors and interface bypass capacitors close to their associated pins, and route the RS-232 driver and receiver traces away from sensitive clock, reset, and analog signals. Confirm signal polarity, grounding, and DTE-versus-DCE assignments before connecting equipment because a physically wired RS-232 link can fail even when both devices meet the same electrical specifications. This page organizes the ADM230LAN specifications, sourcing information, compatible alternatives, and application guidance into a practical engineering reference. It also highlights the trade-offs involved when selecting an integrated single-supply transceiver for industrial, instrument, and embedded serial communication systems.

RFQ پەیوەندی
ADM230LAQ - 5V RS-232 Interface IC | Analog Devices
ADM230LAQ

ADM230LAQ - 5V RS-232 Interface IC | Analog Devices

The Analog Devices ADM230LAQ is a 5 V powered CMOS RS-232 line-driver and receiver interface IC capable of 120 kB/s data transmission. It integrates five driver/receiver channels, onboard DC-DC converters, and a 9 V output swing from a single 5 V supply. The device is packaged in a 20-lead ceramic DIP (CDIP-20) package. An RS-232 interface IC is a semiconductor bridge between low-voltage digital logic and a physical RS-232 communications port. RS-232 uses single-ended, bipolar signaling that can employ voltage levels beyond the supply rails of ordinary CMOS logic. The ADM230LAQ combines driver channels for transmitting data with receiver channels for detecting incoming signals, allowing a +5 V system to communicate with legacy, industrial, or instrumentation equipment without external ±12 V supplies. The ADM230LAQ operates from one 5 V supply and includes onboard DC-DC converters that allow the driver output to reach approximately 9 V of swing. Its specified data rate of 120 kB/s supports higher-speed serial links than legacy limited-rate RS-232 implementations. The receiver section supports 1 A input current handling and receiver inputs remain active during shutdown, helping preserve inbound communication when the transmitter side is powered down. The interface circuitry is designed for EIA-232-E and V.28 implementations. Those standards define the electrical behavior expected of RS-232 drivers, receivers, and signal levels in point-to-point communications. Small 1 F capacitors are used with the onboard converters, allowing the complete interface to be implemented with a single low-voltage supply rather than separate positive and negative power rails. Typical uses include industrial control equipment, test and measurement systems, point-of-sale terminals, embedded serial ports, and legacy peripheral interfaces. In each case, the five interface channels can support multi-channel RS-232 equipment while the 120 kB/s capability accommodates moderately high-speed command, status, and data traffic. Designers should preserve the converter capacitor recommendations and route the interface return path as a continuous ground conductor. The ceramic DIP package supports through-hole insertion and thermal conduction, but its operating temperature grade and exact environmental qualifications must be checked against the current manufacturer documentation before deployment. This page consolidates the confirmed ADM230LAQ interface specifications, package information, application guidance, and clearly qualified replacement considerations. It also distinguishes directly verified functions from parameters that require confirmation in the manufacturer datasheet, helping engineers plan a complete single-supply RS-232 implementation.

RFQ پەیوەندی
ADM230LJN - +5V CMOS RS-232 Driver/Receiver, 120 kbps, PDIP-20 | Analog Devices
ADM230LJN

ADM230LJN - +5V CMOS RS-232 Driver/Receiver, 120 kbps, PDIP-20 | Analog Devices

The Analog Devices ADM230LJN is a +5 V powered CMOS RS-232 line driver and receiver (transceiver) rated for data rates up to 120 kbps, packaged in a 20-pin plastic PDIP through-hole housing specified for 0 °C to +70 °C ambient operation. It is designed for EIA-232-E and V.28 serial interfaces where ±12 V supplies are not available. An RS-232 transceiver is an interface IC that combines a line driver and a line receiver, converting between TTL/CMOS logic levels and the differential bipolar signalling of the RS-232 standard. In the signal chain it belongs to the transceiver class, which sits between parallel logic ICs and a multi-driver, single-ended, physically long cable. A transceiver IC is a subtype of interface IC, which is itself part of the broader semiconductor and signal-conditioning hierarchy. Key features of the ADM230LJN include single +5 V operation, CMOS logic compatibility with 5 V microcontrollers, 120 kbps signalling rate, and a plastic PDIP-20 package that allows through-hole assembly and socketed prototyping. Because the part runs from a single +5 V rail, no separate negative voltage supply or external charge-pump components are required for standard RS-232 levels. The 0 °C to +70 °C rating places it firmly in commercial-temperature grade designs. The +5 V single-supply architecture is the key technical differentiator versus classic RS-232 transceivers that expect a dual ±12 V or ±5 V rail. This simplifies power tree design in industrial controllers, POS terminals, and instrumentation where only regulated +5 V is available, and it lowers overall board current compared with older bipolar driver-receiver combinations. Typical applications include PC serial port interfacing, industrial data acquisition and control panels, point-of-sale and retail peripherals, industrial instrumentation, and general-purpose RS-232 links between a host UART and an external modem or instrument. When designing with the ADM230LJN, keep the RS-232 cable run short, place the transceiver close to the connector, and route the differential receiver pair as a tightly coupled pair with a solid ground reference, because unbalanced RS-232 signalling is susceptible to ground-offset noise. This page consolidates verified distributor and manufacturer data, drop-in replacement options in the same PDIP-20 footprint, and practical interface-design notes that are not found in a single manufacturer datasheet.

RFQ پەیوەندی
ADM230LJR - 5V RS-232 Transceiver | Analog Devices
ADM230LJR

ADM230LJR - 5V RS-232 Transceiver | Analog Devices

The Analog Devices ADM230LJR is a +5 V powered CMOS RS-232 driver and receiver designed for single-supply serial-interface designs where ±12 V is unavailable. It supports 120 kB/s data rates, includes an onboard DC-DC converter, and operates from a single 5 V supply. The device is housed in a 16-lead SOIC package. A CMOS RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232-compatible levels and converts incoming RS-232 signals back into logic levels. It belongs to the interface-IC hierarchy alongside drivers, receivers, and transceivers, providing the physical signaling layer between digital equipment and a serial port. The ADM230LJR is designed for EIA-232-E and V.28-compatible communication links, making it useful where a single supply rail is preferred over a dual-polarity RS-232 interface. The ADM230LJR includes one driver and one receiver in the same package. Its onboard DC-DC converter supports the RS-232 output swing from a 5 V supply, while the receiver remains active in shutdown mode. The datasheet information identifies a 9 V output swing, operation with 1 uF capacitors, a low-power shutdown function, and receiver input tolerance to 30 V. These features help simplify interface implementation in equipment that must protect logic-side circuitry from voltage transients. Because the ADM230LJR is powered from +5 V, its system-level implementation is simpler than traditional RS-232 designs using separate positive and negative supplies. The device is appropriate for instrumentation, industrial-control equipment, data-acquisition systems, embedded serial links, and service interfaces where the communication distance and signaling environment are consistent with RS-232 limits. The 120 kB/s rated data rate supports moderate-speed serial communication rather than high-bandwidth protocols. Layout should keep the serial traces short where possible, provide a stable return path, and place bypass capacitance close to the supply pins. The onboard converter and charge-pump circuitry require careful decoupling according to the manufacturer datasheet. A single 5 V rail, low-power shutdown, and active receiver operation are the principal features to evaluate when choosing this transceiver for compact or intermittently powered serial equipment.

RFQ پەیوەندی
ADM231LAN - 2/2 5V RS-232 Transceiver | Analog Devices
ADM231LAN

ADM231LAN - 2/2 5V RS-232 Transceiver | Analog Devices

Analog Devices ADM231LAN is an obsolete low-power, +5 V CMOS RS-232 transceiver containing two line drivers and two line receivers in a 14-lead plastic dual in-line package. It supports EIA-232-E and V.28 communications interfaces where conventional ±12 V supplies are unavailable. According to the Analog Devices ADM231L family datasheet, the integrated charge-pump circuitry permits operation from a single +5 V supply while maintaining approximately ±5 V driver signal levels. The transceiver is intended for low-power serial-interface designs that require multiple RS-232 channels without external level-shifting components. An RS-232 transceiver is an interface IC that combines a transmitter and receiver with the voltage conversion required at a serial port boundary. The transmitter converts logic-level signals into RS-232-compatible levels, while the receiver converts incoming RS-232 levels back into CMOS-compatible signals. Within the broader semiconductor hierarchy, an RS-232 transceiver belongs to the interface IC family, alongside UARTs, level translators, isolated communication interfaces, and other data-communication components. The ADM231LAN combines two channels in each direction in one package. The principal feature is its two-driver, two-receiver arrangement. Its +5 V CMOS architecture avoids the need for a separate bipolar ±12 V power supply, reducing board complexity in systems where the host or controller already operates from +5 V. The manufacturer's Rev. C datasheet states that the family supports EIA-232-E and V.28 interfaces. It also identifies high slew rates and operation at data rates up to 100 kbps under worst-case loading conditions, making the device suitable for moderate-speed point-to-point serial links. The internal architecture uses charge-pump voltage generation to produce the bipolar signal levels required by RS-232 from one low-voltage supply. Each driver must still handle the voltage and current behavior of an RS-232 connection, including the possibility of a shorted or misconnected cable. The receiver provides the thresholding required to interpret bipolar RS-232 levels as valid logic states. Although the device eliminates external negative-supply generation, its communication performance still depends on correct supply bypassing, controlled-impedance interconnects, and appropriately terminated connector-side networks. Typical uses include industrial control links, point-of-sale equipment, data-acquisition systems, embedded serial ports, and legacy computer interfaces that cannot accept modern ±12 V RS-232 levels directly. It can also serve as a bridge between a +5 V CMOS controller and an RS-232 host, provided that the system observes the family's specified data-rate, supply, temperature, and package constraints. The ADM231LAN's lifecycle status is obsolete, so new production designs should verify current replacement availability before committing a PCB layout to it. The primary design consideration is package migration. The 14-lead plastic dual in-line package is relatively large and not as assembly-efficient as modern leadless or surface-mount interface packages. The 100 kbps capability is suitable for many control and instrumentation links but is not appropriate for higher-bandwidth protocols. Because the part is obsolete, engineers should evaluate listed drop-in candidates by pinout, driver and receiver count, supply voltage, data rate, and transceiver shutdown behavior rather than selecting a substitute solely by the RS-232 label. This product page combines verified manufacturer and distributor information with lifecycle context, application guidance, technical comparisons, and practical replacement-selection criteria. It distinguishes documented facts from unavailable parameters, highlights the ADM231LAN's +5 V two-driver/two-receiver architecture, and identifies the package and supply constraints that most affect drop-in replacement decisions.

RFQ پەیوەندی
ADM231LAQ - 5V CMOS RS-232 Transceiver | Analog Devices
ADM231LAQ

ADM231LAQ - 5V CMOS RS-232 Transceiver | Analog Devices

The Analog Devices ADM231LAQ is a +5 V powered CMOS RS-232 driver and receiver capable of 120 kB/s data transfer, with on-board DC-DC converters, a 9 V output swing, and low-power shutdown in a 16-pin package. The device meets EIA-232-E and V.28 specifications according to the manufacturer datasheet listing, while its on-board converters permit operation from a single 5 V supply. A CMOS RS-232 interface transceiver is a signal-line interface integrated circuit that combines a line driver and receiver with the voltage conversion required by RS-232. Within the broader hierarchy of interface ICs, it translates low-voltage CMOS logic into RS-232-level signals and converts received RS-232 levels back into CMOS-compatible signals. Its applications include data acquisition, industrial control, test equipment, and equipment-to-equipment communication links. The ADM231LAQ supports a data rate of 120 kB/s and provides a 9 V output swing from a 5 V supply. Its on-board DC-DC converters eliminate the need for a separate boosted supply for the RS-232 driver. Small 1 µF charge-pump capacitors are specified for the converter implementation, reducing board area compared with traditional discrete charge-pump approaches. A low-power shutdown feature helps reduce supply consumption when the interface is not active. Unlike the standard shutdown arrangement in some competing transceivers, the ADM231LAQ keeps its receivers active during shutdown, allowing incoming RS-232 signals to remain detectable. Its receiver input can also tolerate signals as high as 30 V, which improves robustness when the connected cable or system exposes the interface to larger voltage excursions. The ADM231LAQ is suitable for point-to-point RS-232 links in industrial equipment, instrumentation, data loggers, and control systems. A single 5 V rail simplifies system power architecture, while the integrated converters maintain the positive and negative voltages required by RS-232. The 120 kB/s rate supports legacy serial communication, modem interfaces, and equipment control links where higher-speed differential standards are unnecessary. The principal design consideration is ensuring that external protection, connector selection, and grounding match the cable environment. The 30 V receiver input capability improves tolerance, but it does not replace surge protection or isolation in long industrial cable runs. Designers should also verify the exact package dimensions and pin assignment before PCB layout because the verified data identifies the device as a 16-pin part without publishing the package drawing in the supplied excerpts. This page consolidates the verified 120 kB/s operating rate, 5 V supply, 9 V output swing, 1 µF capacitor requirement, shutdown behavior, and distributor pricing information. It also separates confirmed data from unavailable package, pinout, lifecycle, and drop-in replacement details so engineers can identify what must be checked against the manufacturer datasheet before production release.

RFQ پەیوەندی
ADM231LAR - 5V RS-232 Transceiver, 120kB/s | Analog Devices
ADM231LAR

ADM231LAR - 5V RS-232 Transceiver, 120kB/s | Analog Devices

The Analog Devices ADM231LAR is a 5 V powered CMOS RS-232 driver and receiver intended for EIA-232-E and V.28 communications interfaces. It operates from a single 5 V supply, supports data rates up to 120 kB/s, and is available in a 16-lead SOIC package. The verified product information identifies the part as obsolete, so new designs should confirm availability before committing to a layout. An RS-232 transceiver is an interface IC that converts logic-level signals into the bipolar voltage levels used by RS-232 links and converts returning bipolar signals back to CMOS logic. Within the interface hierarchy, this device belongs to the line-driver and receiver family, then to communication transceivers, and finally to the broader category of interface ICs. Its integrated DC-DC converter allows the driver to generate the positive and negative voltage swings required by RS-232 from one 5 V rail. Key features include a 120 kB/s maximum data rate, on-board DC-DC converters, a 9 V output swing with the 5 V supply, and support for small 1 uF charge-pump capacitors. A low-power shutdown function reduces consumption when the interface is not required. According to the verified feature summary, the receiver remains active during shutdown, allowing incoming signals to be monitored without powering the transmitter section fully. The receiver input is rated to 30 V, providing tolerance for ±15 V RS-232 signals and additional margin on unused or disconnected receive inputs. These characteristics make the ADM231LAR applicable to legacy serial ports, industrial control links, service equipment, instrumentation, and embedded systems that communicate with older RS-232 equipment. The principal design trade-off is that the ADM231LAR is a legacy 120 kB/s interface rather than a modern high-speed or multi-port RS-232 solution. Its single-supply architecture simplifies systems that lack ±12 V rails, but obsolete lifecycle status, charge-pump capacitor requirements, and the lower 120 kB/s ceiling limit new design adoption. When planning a replacement design, engineers should verify the complete pinout, shutdown behavior, charge-pump capacitor values, and package dimensions rather than selecting a substitute from the RS-232 family name alone. The verified sources did not establish five pin-compatible drop-in replacements in the same 16-lead SOIC footprint, so the alternatives listed here are limited to candidates for which comparative information was found. This page consolidates the verified manufacturer and distributor information, lifecycle status, pricing reference, interface characteristics, and replacement guidance for engineers evaluating an obsolete ADM231LAR inventory.

RFQ پەیوەندی
ADM231LARZ - Low-Power +5V RS-232 Transceiver | Analog Devices
ADM231LARZ

ADM231LARZ - Low-Power +5V RS-232 Transceiver | Analog Devices

Analog Devices ADM231LARZ is a low-power, +5V CMOS RS-232 transceiver containing two drivers and two receivers in a 16-pin SOP package. The device operates from a single +5V supply, is intended for industrial-temperature RS-232 interface equipment, and supports a maximum supply voltage of 5.5 V. Its four-channel arrangement allows two bidirectional communication links or two unidirectional links on a compact printed circuit board. An RS-232 transceiver is an interface IC that converts logic-level signals between a microprocessor or UART and the voltage-defined RS-232 port. It belongs to the line-driver and receiver hierarchy, combining driver circuitry, receiver circuitry, level shifting, and electrical-noise control in one package. Such devices provide the voltage translation and signal conditioning required when a CMOS UART operates from a supply rail different from the RS-232 interface voltage range. The ADM231L series is identified by Analog Devices as a low-power, +5V CMOS RS-232 solution. The ADM231LARZ combines two transmitters and two receivers, which permits simultaneous operation of two serial channels or allocation of separate transmit and receive paths. Its SOP-16 package is suitable for conventional through-hole PCB assembly and industrial control, instrumentation, data-acquisition, and embedded equipment designs. Analog Devices lists the ADM231L family as obsolete, making lifecycle status an important selection criterion for new designs. For an existing supported design, the device can remain appropriate where its original electrical and pin requirements are already validated. For a new production release, engineers should evaluate a currently supported RS-232 transceiver after checking pin compatibility, supply voltage, driver and receiver ratings, shutdown behavior, and external-network requirements. Typical applications include industrial serial consoles, barcode-scanner interfaces, test equipment, embedded data loggers, and RS-232 port expansion. In a two-port design, each transmitter drives a corresponding receiver through the external RS-232 connector and cable network. The internal receiver converts the bipolar RS-232 signal back to a logic level that can be interpreted directly by a UART. PCB design should follow the Analog Devices pin-description table and the manufacturer’s recommended decoupling guidance. Place the +5V bypass capacitor close to the supply pins, route driver outputs and receiver inputs away from sensitive logic, and verify connector protection for the intended cable length and industrial noise environment. RS-232 voltage levels must not be applied directly to a UART pin without the transceiver. This page combines the manufacturer lifecycle statement with practical guidance for obsolete-part risk assessment, interface topology selection, PCB implementation, and drop-in replacement investigation. It also distinguishes the verified ADM231LARZ identity from unconfirmed alternatives, helping engineers make a defensible sourcing and redesign decision.

RFQ پەیوەندی
ADM231LJN - 5V 120kbps RS-232 Transceiver | Analog Devices
ADM231LJN

ADM231LJN - 5V 120kbps RS-232 Transceiver | Analog Devices

Analog Devices ADM231LJN is a 5 V-powered CMOS RS-232 driver and receiver operating at up to 120 kB/s, with 9 V output swing from a single 5 V supply and external 1 F charge-pump capacitors. The device is packaged in a 16-pin PDIP format for through-hole PCB installation. An RS-232 transceiver is an interface IC that converts logic-level digital signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into CMOS-compatible logic. Positioned within the hierarchy of interface controllers, transceivers, and semiconductors, the ADM231LJN is designed for EIA-232-E and V.28 communications where a traditional ±12 V supply is unavailable. Its integrated DC-DC converter allows one-sided, single-supply operation. The principal features include a single 5 V supply, operation at 120 kB/s, 9 V RS-232 output swing, onboard DC-DC conversion, and small external charge-pump capacitors. These characteristics allow a compact interface to operate from a regulated 5 V rail rather than requiring separate positive and negative RS-232 supply rails. The receiver also tolerates inputs extending to 30 V, providing additional protection margin when an external line or connected equipment presents an elevated voltage. The device combines CMOS logic compatibility with analog line-driver and receiver functions in one package. Onboard charge-pump circuitry develops the positive and negative voltages needed for RS-232 signaling. Although the implementation is compact, correct capacitor selection and placement remain important because charge-pump voltage determines usable line swing and signal integrity. The 120 kB/s capability is suitable for instrumentation, industrial control, data acquisition, and embedded serial links that do not require the maximum rate of newer RS-232 transceivers. Typical applications include laboratory instruments, industrial controllers, barcode and identification equipment, point-of-sale terminals, and embedded systems communicating with legacy RS-232 peripherals. A single 5 V rail simplifies system power design while preserving the voltage levels expected by conventional RS-232 ports. The 30 V receiver-input rating should still be paired with normal ESD protection and correctly routed grounding. For reliable implementation, place the external charge-pump capacitors close to their designated pins, route the RS-232 driver outputs away from sensitive logic, and provide a stable ground reference between communicating systems. Confirm that the connected equipment uses EIA-232-E signal levels rather than TTL, RS-422, RS-485, or another interface. The 120 kB/s rate and 9 V output swing should also be checked against cable length and system timing. This product overview combines the manufacturer's interface, speed, voltage, and package characteristics with practical guidance on charge-pump capacitors, grounding, signal routing, and drop-in substitution. It helps engineers evaluate the ADM231LJN faster when designing a 5 V-only RS-232 interface around a legacy peripheral or communication port.

RFQ پەیوەندی
ADM231LJR - 5V 120kbps RS-232 Transceiver | Analog Devices
ADM231LJR

ADM231LJR - 5V 120kbps RS-232 Transceiver | Analog Devices

The Analog Devices ADM231LJR is a 5 V powered CMOS RS-232 driver and receiver capable of 120 kB/s data transmission. The 16-lead gull-wing SOP package combines one supply rail, on-board DC-DC converters, low-power shutdown, and receiver operation during shutdown in a compact industrial interface circuit. An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into differential-voltage, bipolar serial-line signals. Its functional hierarchy is RS-232 transceiver, line driver and receiver, communications interface IC, and broader semiconductor category. The ADM231LJR belongs to the ADM23xL family of single-supply RS-232 devices designed for industrial, instrumentation, and data-communication equipment. The ADM231LJR operates from a single 5 V supply and supports data rates up to 120 kB/s. Its on-board DC-DC converters produce the bipolar signal voltages required by RS-232 without a separate external charge-pump supply. The device provides 9 V output swing from a 5 V supply and uses only 1 F charge-pump capacitors, reducing board area compared with implementations requiring larger external capacitors. Power management features include low-power shutdown and receivers that remain active while the transmitter is shut down. This arrangement allows a system to monitor an RS-232 connection, detect activity, or wake a host without powering the full driver. The receiver input withstands voltages up to 30 V, improving tolerance to exposed industrial cabling and off-state bus conditions. Typical uses include industrial serial consoles, test and measurement equipment, point-of-sale terminals, programmable logic controllers, and embedded instruments that exchange serial data over longer cable runs than a logic-level UART. The 120 kB/s rate is suitable for configuration links, diagnostics, firmware update paths, and moderate-rate control data rather than continuous high-bandwidth streaming. The main design trade-off is power dissipation. A 5 V-only supply rail simplifies system power, but the DC-DC converters add internal switching activity compared with a dual-polarity implementation. Follow the recommended capacitor and charge-pump layout in the manufacturer datasheet, keep the RS-232 connector side of the circuit physically separated from sensitive analog and digital nodes, and provide a controlled signal ground reference.

RFQ پەیوەندی
ADM231LJRZ - 5V Dual RS-232 Transceiver | Analog Devices
ADM231LJRZ

ADM231LJRZ - 5V Dual RS-232 Transceiver | Analog Devices

The Analog Devices ADM231LJRZ is an obsolete, low-power, +5 V CMOS RS-232 transceiver with 2 drivers and 2 receivers in a 16-pin wide SOIC package. The device supports RS-232 data rates up to 100 kbps under worst-case loading and operates from a single 5 V supply. Its four-channel arrangement supports compact two-direction serial interfaces without requiring separate driver and receiver ICs. An RS-232 transceiver is an interface IC that converts between logic-level signals and the bipolar voltage levels used by RS-232 equipment. It belongs to the interface IC category and combines line drivers, line receivers, and charge-pump voltage support into one integrated component. The ADM231L is specifically positioned for low-power, +5 V systems where the RS-232 port must conserve board area and supply current. The principal features are a single 5 V supply, two RS-232 drivers, two RS-232 receivers, CMOS-compatible logic inputs, and operation at data rates up to 100 kbps. The 16-pin SOIC package supports conventional surface-mount assembly and provides enough pins for power, ground, driver outputs, receiver inputs, and control functions. The manufacturer identifies the ADM231L family as obsolete, so new designs should account for lifecycle risk rather than treating it as an unrestricted new-production choice. The multi-channel architecture allows one IC to serve a port containing both transmit and receive paths. This can reduce component count compared with using separate single-channel RS-232 devices. The 100 kbps capability is suitable for data acquisition, industrial control, instrumentation, and legacy peripheral connections where moderate-speed serial transfer is sufficient, although it does not target high-speed differential serial protocols. Typical uses include industrial serial controllers, test and measurement equipment, point-of-sale systems, data-logging equipment, and embedded systems that retain an RS-232 interface. In each case, the two transmitters can carry outbound control or measurement data, while the two receivers can accept status information or commands from a remote terminal. Design the surrounding interface carefully because RS-232 is a single-ended, bipolar system rather than a logic-level UART connection. Check voltage levels, grounding, cable length, and protection requirements in the application circuit. Allow suitable bypass capacitance at the +5 V supply pins and route interface traces away from noisy switching nodes to reduce data errors. This page combines the manufacturer lifecycle information with package details, technical comparisons, and practical integration guidance. It also identifies when a current interface IC or a same-family replacement should be considered, helping engineers evaluate ADM231LJRZ against modern design requirements without overlooking its obsolete status.

RFQ پەیوەندی
ADM232AAN - 200kbps Dual RS-232 Transceiver | Analog Devices
ADM232AAN

ADM232AAN - 200kbps Dual RS-232 Transceiver | Analog Devices

Analog Devices ADM232AAN is a 200 kbps dual RS-232 line-driver and line-receiver interface IC with two drivers, two receivers, a single 5 V supply, and a 16-lead plastic DIP package. It uses small 0.1 µF charge-pump capacitors and provides approximately ±9 V driver output swing from the 5 V supply while accepting receiver inputs up to ±30 V. The device meets the EIA-232-E and V.28 specifications identified in the manufacturer documentation. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar, differential voltage conventions used by RS-232 equipment. In the broader hierarchy, it belongs to the interface IC category, combines line-driver and line-receiver functions, and provides physical-layer connectivity between computer serial ports, industrial controllers, and communications equipment. The ADM232A family is positioned as a pin-compatible, high-speed upgrade for the AD232 and ADM232L families. Key features include a 200 kB/s transmission rate, two transmit channels, two receive channels, a single 5 V supply, on-board DC-DC converters, and compatibility with MAX222, MAX232A, and MAX242 pin arrangements. The small 0.1 µF charge-pump capacitors reduce board-space requirements compared with older RS-232 implementations using larger flying capacitors. Receiver inputs tolerate ±30 V, supporting practical protection against larger voltage excursions encountered on an external RS-232 port. Technically, the charge-pump circuitry generates the positive and negative voltage rails required by RS-232 drivers from the single 5 V source. The ADM232AAN combines this internal supply conversion with CMOS driver and receiver stages. Its 200 kB/s data rate supports legacy serial links substantially above the older 64 kB/s class of interface while retaining the established EIA-232-E and V.28 signaling behavior. Because the ADM232AAN is a 16-lead DIP device, it is intended for through-hole assembly, prototyping, legacy equipment, and industrial control boards where a surface-mount RS-232 footprint would be inconvenient. Typical applications include industrial serial controllers, test and measurement instruments, point-of-sale equipment, data acquisition systems, legacy computer peripherals, and isolated or non-isolated RS-232 communication ports. In a typical circuit, the IC interfaces a microcontroller UART to a DB9 or other RS-232 connector. Series resistance may be required on driver outputs when the connected cable is unusually long or exposes the port to electrostatic discharge; connector protection should be selected according to the actual cable and installation environment. Designers should place the charge-pump capacitors close to their specified pins and route the high-current charge-pump paths to minimize switching noise. The 5 V supply must provide adequate transient current, and PCB grounding should preserve a low-impedance return path between the transceiver and connector. Because the ADM232AAN has no integrated isolation barrier, applications requiring galvanic isolation require external isolation components and a suitably isolated power design. This page combines the verified manufacturer specifications, distributor package identification, cross-reference findings, application guidance, and drop-in replacement criteria. It also distinguishes verified facts from electrical values that were not present in the supplied source data, helping engineers compare replacements without assuming that equivalent function automatically guarantees equivalent layout or system behavior.

RFQ پەیوەندی
ADM232AANZ - 200 kB/s Dual RS-232 Transceiver | Analog Devices
ADM232AANZ

ADM232AANZ - 200 kB/s Dual RS-232 Transceiver | Analog Devices

The Analog Devices ADM232AANZ is a dual RS-232 line-driver and receiver transceiver rated for data rates up to 200 kB/s. It operates from a single 5 V supply and uses an on-board DC-DC converter with 0.1 µF charge-pump capacitors to produce the bipolar voltage swings required by RS-232 links. The device is packaged in a 16-lead DIP. An RS-232 transceiver is an interface integrated circuit that translates logic-level signals into RS-232 bipolar levels and converts received bipolar signals back into digital logic levels. It belongs to the interface IC hierarchy, where transceivers connect a host, controller, or test instrument to a serial communications port. The ADM232A combines two drivers and two receivers, allowing one package to support two bidirectional serial channels or one full-duplex channel plus additional receive or drive capability. The ADM232AANZ provides a 200 kB/s transmission rate, single 5 V operation, two drivers, two receivers, and an on-board DC-DC converter. According to the manufacturer product information, the charge-pump design uses only 0.1 µF external capacitors, reducing the external component count required for RS-232 level conversion. The interface is designed to meet EIA-232-E and V.28 specifications, making it suitable for equipment using established RS-232 electrical requirements. The integrated charge pump creates the positive and negative voltages needed by an RS-232 receiver even though the device itself is powered from only 5 V. This arrangement eliminates the need for a separate bipolar supply at the interface. The two-driver, two-receiver organization also allows designers to combine transmit and receive functions in a standard 16-lead through-hole footprint rather than using separate driver and receiver packages. Typical applications include industrial serial-port adapters, instrumentation, point-of-sale equipment, test and measurement systems, embedded control equipment, and legacy peripheral connections. The 200 kB/s rate is useful when the linked equipment requires more speed than a basic asynchronous serial interface provides. Because RS-232 is a point-to-point standard, the interface should be placed at the physical end of a cable run and connected to a compatible host or peripheral. For a new design, verify the complete transceiver pin assignment, charge-pump capacitor values, and supply requirements in the Analog Devices ADM232A datasheet before laying out the PCB. If the target board instead uses a surface-mount footprint, changing to ADM232AANZ requires a package redesign because the AANZ ordering code denotes a 16-lead DIP rather than a surface-mount option. This page combines the ADM232AANZ interface capabilities, package constraints, replacement guidance, and practical design considerations in one engineering-oriented reference. It also identifies where a same-footprint replacement can be evaluated and where a PCB migration is unavoidable.

RFQ پەیوەندی
ADM232AARN - 200kbps Dual RS-232 IC | Analog Devices
ADM232AARN

ADM232AARN - 200kbps Dual RS-232 IC | Analog Devices

The Analog Devices ADM232AARN is a dual RS-232 line-driver and receiver interface IC supporting data rates up to 200 kB/s from a single 5 V supply. The device provides two transmitters and two receivers and is packaged in a 16-lead narrow SOIC for compact RS-232 interface designs. An RS-232 transceiver is a semiconductor interface that converts low-voltage digital logic signals into bipolar RS-232 levels and converts received bipolar signals back into TTL or CMOS logic levels. Within the electronics hierarchy, the ADM232AARN is an RS-232 transceiver, interface IC, and power-management-assisted data-conversion component used to bridge modern digital equipment with legacy serial ports. The ADM232AARN integrates an on-chip DC-DC charge pump, allowing bipolar RS-232 levels to be generated from one 5 V supply without a separate negative power rail. The charge pump uses small 0.1 uF external capacitors. Its two-driver, two-receiver arrangement supports two RS-232 channels per package and reduces the number of interface components required in multi-port equipment. Data rates reach 200 kB/s, making the device suitable for equipment that needs faster serial transfer than low-speed RS-232 transceivers. The interface meets EIA-232-E and V.28 specifications. According to the Analog Devices datasheet, the outputs provide approximately 9 V swing with a 5 V supply, while the receivers accept input voltages to 30 V, providing useful margin for standard RS-232 signaling. Typical uses include industrial control consoles, point-of-sale equipment, instrumentation, data acquisition systems, and embedded products that retain a legacy RS-232 port. The integrated charge pump simplifies board layout, while the narrow 16-SOIC package supports space-constrained designs without requiring a separate negative supply regulator. When laying out the circuit, place the charge-pump capacitors close to their specified pins and route the driver outputs and receiver inputs away from sensitive analog and high-speed digital traces. Confirm ground-reference compatibility between the two connected RS-232 endpoints because the interface converts voltage levels but does not isolate the ground connection. This page combines device specifications, pin-compatible alternatives, interface application guidance, and practical layout considerations to support component selection, PCB implementation, and sourcing decisions for the ADM232AARN.

RFQ پەیوەندی
ADM232AARNZ - 200kbps RS-232 Transceiver | Analog Devices
ADM232AARNZ

ADM232AARNZ - 200kbps RS-232 Transceiver | Analog Devices

The Analog Devices ADM232AARNZ is a 2/2 high-speed RS-232 transceiver with two drivers and two receivers, a 200 kB/s maximum transmission rate, single 5 V operation, and a 16-lead narrow-body SOIC package. The device includes an on-board charge-pump DC-DC converter that develops the bipolar RS-232 voltage levels required by the EIA-232-E and V.28 specifications. Its charge pump requires only 0.1 µF external capacitors, helping reduce board area and external component count. The receiver supports input levels to ±30 V, while the driver produces approximately ±9 V output swing from a 5 V supply. An RS-232 transceiver is a semiconductor interface that combines digital line drivers and receivers with level-shifting circuitry for unbalanced serial communication. The broader hierarchy is transceiver → serial interface IC → interface IC → semiconductor. It converts logic-level signals from a host, microcontroller, or data-processing system into bipolar RS-232 signals, while receiving and translating remote RS-232 signals back into logic-compatible levels. This makes the ADM232A family appropriate for point-to-point serial links where longer reach and noise immunity are more important than the low cost of a 3.3 V RS-232 interface. Key features include two transmit channels, two receive channels, a maximum data rate of 200 kB/s, operation from one 5 V supply, and 0.1 µF charge-pump capacitors. The approximately ±9 V transmit swing and ±30 V receiver input capability provide compatibility with standard RS-232 equipment. The device is designed for higher signaling speeds than the lower-speed ADM232L family, making it useful where command, configuration, or control traffic must move reliably across an RS-232 connection. Internally, the charge pump converts the single 5 V supply into the positive and negative voltages required by RS-232 drivers. The receiver side detects the bipolar input levels and produces a logic-level output for the host. The Analog Devices ADM232A product page identifies the ADM232A as a pin-compatible, high-speed upgrade for the AD232 and ADM232L. It is offered in 16-lead DIP and narrow or wide surface-mount SOIC packages, giving designers multiple package options when balancing footprint, assembly cost, and thermal considerations. Typical uses include industrial control consoles, laboratory instrumentation, barcode scanners, service equipment, point-of-sale systems, and embedded systems that retain an RS-232 communication port. The two-driver, two-receiver arrangement suits full-duplex point-to-point links carrying data in both directions. In cable-based systems, the RS-232 electrical standard is intended for short-distance, unbalanced, point-to-point communication, so the ADM232AARNZ should be paired with suitable connectors and cable routing. PCB implementation requires close placement of the 0.1 µF charge-pump capacitors and careful treatment of the RS-232 pins as high-voltage signal nodes. Keep unprotected connector-side traces away from low-voltage logic, preserve adequate spacing, and provide a stable ground reference. Confirm the complete pin assignment, including any no-connect or enable-related pins, against the manufacturer datasheet before assigning tracks or producing a footprint. This page combines manufacturer specifications, package information, sourcing guidance, cross-reference candidates, and application-specific design considerations. It also identifies where package, pinout, or qualification details must be confirmed in the datasheet before a component is approved for production.

RFQ پەیوەندی