DSPIC30F6013-30I/PF - 30 MIPS 16-bit DSC 132KB Flash | Microchip | TQFP-80
MPN: DSPIC30F6013-30I/PF ✗ کۆتایی ژیانDSPIC30F6013-30I/PF گشتی
In the broader product taxonomy, the dsPIC30 family sits between 8-bit PIC microcontrollers and 32-bit ARM Cortex devices: a DSC is a microcontroller (MCU) augmented by a multiply-accumulate (MAC) DSP engine, single-cycle hardware multiply, and 40-bit accumulators, which is why DSCs are frequently called "DSP-capable MCUs". They are categorized as microcontrollers > 16-bit microcontrollers > digital signal controllers > power management & signal processing ICs. The DSPIC30F6013 explicitly targets motor control, audio processing, and sensorless BLDC/PMSM applications where deterministic interrupt latency and DSP horsepower matter more than raw MHz.
Key features include 8 channels of PWM with up to 16-bit resolution and three CPU-cycle PWM-to-PWM jitter, eight 16-bit timer/counters, two UART modules, two SPI ports, two I2C interfaces, a CAN 2.0B module, a 12-bit ADC with 16 channels at 200 ksps, a 16-channel 12-bit ADC supporting up to 200 ksps, and a 10-bit DAC output stage. The device supports 2.5 V to 5.5 V operation and offers both -40C to +125C industrial temperature range variants, packaged in TQFP-80.
Typical applications span motor control (sensorless BLDC, AC induction, switched reluctance), uninterruptible power supplies, audio decoding, automotive sensor fusion, and industrial drives. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found on any single distributor page.
جێگرەوەکانی جێگۆڕکێ بۆ DSPIC30F6013-30I/PF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ DSPIC30F6013-30I/PF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Core Architecture, Package, ADC, I/O Pins, Operating Temperature.
DSPIC30F6013A-30I/PF
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DSPIC30F6013-20I/PF
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DSPIC30F6012-30I/PF
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DSPIC30F6012AT-30I/PF
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DSPIC30F6011T-30I/PF
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DSPIC30F6011AT-30I/PF
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
DSPIC30F6013-30I/PF زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core Architecture | dsPIC30 16-bit modified Harvard RISC + DSP engine |
| CPU Speed | 30 MIPS at 40 MHz |
| Program Memory (Flash) | 132 KB |
| Data RAM | 6 KB |
| Auxiliary Flash (EEPROM emulation) | 2 KB |
| ڤۆڵتیەی دابینکردن | 2.5 V to 5.5 V |
| مەودای پلەی گەرمیی کارکردن | -40C to +85C (industrial, "I") |
| I/O Pins | 68 |
| ADC | 12-bit, 16 channels, 200 ksps |
| PWM Channels | 8 (16-bit, complementary outputs) |
| Timers | Five 16-bit timer/counters, one 32-bit (x8) |
| UART | 2 modules |
| SPI | 2 modules |
| I2C | 2 modules |
| CAN | CAN 2.0B (1 module) |
| پاکێج | TQFP-80 (PF), 14 mm x 14 mm, 1.0 mm height, 0.65 mm pitch |
| جۆری دامەزراندن | Surface Mount |
| دۆخی RoHS | Compliant |
ڕێکخستنی پینی DSPIC30F6013-30I/PF
| پین 1 | MCLR — Master Clear reset input, active low; tied to VDD via pull-up during normal operation |
| پین 2 | AVDD — Analog supply voltage |
| پین 3 | AVSS — Analog ground reference |
| پین 4 | OSC1 — Crystal oscillator input |
| پین 5 | OSC2 — Crystal oscillator output |
| پین 6 | RP0/CN8/OC1 — Remappable I/O, change notification, PWM output 1 |
| پین 7 | RP1/CN9/OC2 — Remappable I/O, change notification, PWM output 2 |
| پین 8 | RP2/CN10/OC3 — Remappable I/O, change notification, PWM output 3 |
| پین 9 | RP3/CN11/OC4 — Remappable I/O, change notification, PWM output 4 |
| پین 10 | RP4/CN12/OC5 — Remappable I/O, change notification, PWM output 5 |
| پین 11 | RP5/CN13/OC6 — Remappable I/O, change notification, PWM output 6 |
| پین 12 | RP6/CN14/OC7 — Remappable I/O, change notification, PWM output 7 |
| پین 13 | RP7/CN15/OC8 — Remappable I/O, change notification, PWM output 8 |
| پین 14 | VDD — Digital supply voltage |
| پین 15 | VSS — Digital ground |
| پین 16 | RP8/U1TX — Remappable I/O / UART1 transmit |
| پین 17 | RP9/U1RX — Remappable I/O / UART1 receive |
| پین 18 | RP10/SDO1 — Remappable I/O / SPI1 data out |
| پین 19 | RP11/SDI1 — Remappable I/O / SPI1 data in |
| پین 20 | RP12/SCK1 — Remappable I/O / SPI1 clock |
| پین 21 | RP13/SS1 — Remappable I/O / SPI1 slave select |
| پین 22 | RP14/C1TX — Remappable I/O / CAN1 transmit |
| پین 23 | RP15/C1RX — Remappable I/O / CAN1 receive |
| پین 24 | RP16/SDO2 — Remappable I/O / SPI2 data out |
| پین 25 | RP17/SDI2 — Remappable I/O / SPI2 data in |
| پین 26 | RP18/SCK2 — Remappable I/O / SPI2 clock |
| پین 27 | RP19/SS2 — Remappable I/O / SPI2 slave select |
| پین 28 | RP20/SDA1 — Remappable I/O / I2C1 data |
| پین 29 | RP21/SCL1 — Remappable I/O / I2C1 clock |
| پین 30 | VDD — Digital supply voltage |
| پین 31 | VSS — Digital ground |
| پین 32 | RP22/SDA2 — Remappable I/O / I2C2 data |
| پین 33 | RP23/SCL2 — Remappable I/O / I2C2 clock |
| پین 34 | RP24/U2TX — Remappable I/O / UART2 transmit |
| پین 35 | RP25/U2RX — Remappable I/O / UART2 receive |
| پین 36 | RP26/PWM1H — Remappable I/O / PWM1 high output |
| پین 37 | RP27/PWM1L — Remappable I/O / PWM1 low output |
| پین 38 | RP28/PWM2H — Remappable I/O / PWM2 high output |
| پین 39 | RP29/PWM2L — Remappable I/O / PWM2 low output |
| پین 40 | VSS — Digital ground |
| پین 41 | TDI — JTAG test data input |
| پین 42 | TCK — JTAG test clock |
| پین 43 | TMS — JTAG test mode select |
| پین 44 | TDO — JTAG test data output |
| پین 45 | VDD — Digital supply voltage |
| پین 46 | AN0 — Analog input channel 0 / reference input |
| پین 47 | AN1 — Analog input channel 1 |
| پین 48 | AN2 — Analog input channel 2 |
| پین 49 | AN3 — Analog input channel 3 |
| پین 50 | AN4 — Analog input channel 4 |
| پین 51 | AN5 — Analog input channel 5 |
| پین 52 | VREF- — ADC negative reference |
| پین 53 | VREF+ — ADC positive reference |
| پین 54 | AVDD — Analog supply voltage |
| پین 55 | AVSS — Analog ground reference |
| پین 56 | AN6 — Analog input channel 6 |
| پین 57 | AN7 — Analog input channel 7 |
| پین 58 | AN8 — Analog input channel 8 |
| پین 59 | AN9 — Analog input channel 9 |
| پین 60 | AN10 — Analog input channel 10 |
| پین 61 | AN11 — Analog input channel 11 |
| پین 62 | AN12 — Analog input channel 12 |
| پین 63 | AN13 — Analog input channel 13 |
| پین 64 | AN14 — Analog input channel 14 |
| پین 65 | AN15 — Analog input channel 15 |
| پین 66 | VSS — Digital ground |
| پین 67 | RP30/PWM3H — Remappable I/O / PWM3 high output |
| پین 68 | RP31/PWM3L — Remappable I/O / PWM3 low output |
| پین 69 | RP32/PWM4H — Remappable I/O / PWM4 high output |
| پین 70 | RP33/PWM4L — Remappable I/O / PWM4 low output |
| پین 71 | RP34/PWM5H — Remappable I/O / PWM5 high output |
| پین 72 | RP35/PWM5L — Remappable I/O / PWM5 low output |
| پین 73 | RP36/PWM6H — Remappable I/O / PWM6 high output |
| پین 74 | RP37/PWM6L — Remappable I/O / PWM6 low output |
| پین 75 | RP38/PWM7H — Remappable I/O / PWM7 high output |
| پین 76 | RP39/PWM7L — Remappable I/O / PWM7 low output |
| پین 77 | RP40/PWM8H — Remappable I/O / PWM8 high output |
| پین 78 | RP41/PWM8L — Remappable I/O / PWM8 low output |
| پین 79 | PGED1 — ICSP/ICD programming data line |
| پین 80 | PGEC1 — ICSP/ICD programming clock line |
بەکارهێنانە باوەکان
DSPIC30F6013-30I/PF گونجاوە بۆ 7 بەکارھێنانs: Sensorless BLDC Motor Control, Audio Decoding / Voice Processing, Uninterruptible Power Supplies (UPS), Industrial Sensor Acquisition, Automotive Body & Climate Modules, Switched-Mode Power Supplies (SMPS), Consumer Audio Effects & Equalization.
Sensorless BLDC Motor Control
The DSPIC30F6013-30I/PF's 30 MIPS DSP engine, 8 PWM channels with 16-bit resolution and three CPU-cycle jitter, plus its 12-bit 200 ksps ADC make it ideal for sensorless BLDC/PMSM motor control. Real-time FOC algorithms require deterministic execution and synchronized ADC triggers, both of which this part supports. The 132 KB Flash fits field-oriented control firmware plus application state machines and CAN diagnostics. Use the DSPIC30F6013 where 4 PWM channels and 10 MIPS are insufficient.
پێشنیارکراو
Audio Decoding / Voice Processing
The DSP engine's single-cycle MAC unit, 40-bit accumulators, and dual 16-bit data paths make the DSPIC30F6013-30I/PF suitable for compressed-audio decode, voice-band codecs, and small-vocabulary speech recognition. At 30 MIPS, it can comfortably decode ADPCM, G.711, or proprietary speech codecs while still running housekeeping tasks on its MCU core. The 6 KB RAM is sufficient for ring-buffer audio frames without external memory.
پێشنیارکراو
Uninterruptible Power Supplies (UPS)
The DSPIC30F6013-30I/PF's high-speed ADC, PWM generators, and DSP capability make it well suited to digital control of UPS inverters, where it runs repetitive control loops on voltage and current feedback. Tight ADC-to-PWM timing ensures low distortion and stable output regulation. The 132 KB Flash accommodates control law and waveform generation tables for full-bridge inverter stages.
پێشنیارکراو
Industrial Sensor Acquisition
The DSPIC30F6013-30I/PF combines CAN 2.0B, dual UART, dual SPI, and dual I2C for industrial sensor hubs and process I/O aggregators. Its 200 ksps ADC samples 4-20 mA loops and bridge sensor outputs; its DSP engine performs temperature compensation and linearization in firmware. Operating from 2.5 V to 5.5 V, it pairs well with both 3.3 V and 5 V sensors commonly found on industrial interfaces.
پێشنیارکراو
Automotive Body & Climate Modules
The DSPIC30F6013-30I/PF's CAN 2.0B interface, multiple PWM channels, and robust -40C to +85C industrial range make it useful for non-safety automotive body electronics such as climate control panels and seat modules. The 30 MIPS core handles CAN stacks and PWM fan/PWM motor control loops in a single device. For under-hood applications needing +125C, upgrade to AEC-Q100-qualified dsPIC33 variants.
پێشنیارکراو
Switched-Mode Power Supplies (SMPS)
Digital control of SMPS converters benefits from the DSPIC30F6013-30I/PF's fast ADC, hardware PWM, and DSP MAC capability used for PID calculations and digital filtering on sampled current. The 132 KB Flash permits concurrent firmware updating on multiple power-stage firmware variants. The on-chip auxiliary Flash (2 KB) supports runtime tunable calibration data without external EEPROM.
پێشنیارکراو
Consumer Audio Effects & Equalization
Beyond basic decoding, the DSP engine inside the DSPIC30F6013-30I/PF enables real-time parametric EQ, 3D-sound processing, and active-crossover calculations in higher-end consumer audio. The MAC unit executes biquad filters and matrix mixing at low overhead. Software flexibility avoids dedicated DSP ICs and keeps the BOM short.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ DSPIC30F6013-30I/PF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | DSPIC30F6013A-30I/PF | DSPIC30F6013-20I/PF | DSPIC30F6012-30I/PF | DSPIC30F6012AT-30I/PF | DSPIC30F6011T-30I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PF) | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same |
| MIPS | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 20 MIPS at 30 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz |
| Flash Memory | 132 KB | 132 KB | 132 KB | 48 KB | 48 KB | 132 KB (6011 family variant) |
| Data RAM | 6 KB | 6 KB | 6 KB | 8 KB | 8 KB | 6 KB |
| PWM Channels | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) |
| ADC | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps |
| CAN | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) |
| Lifecycle Status | NRND | NRND / active variant | NRND | NRND | NRND | NRND |
جیاکەرەوە سەرەکییەکان
- Pin-compatible upgrade path with silicon-revision "A" drop-in (بەراورد بەDSPIC30F6013A-30I/PF)
- Same package, lower MIPS option for power-sensitive variants (بەراورد بەDSPIC30F6013-20I/PF)
- Same family with expanded memory (بەراورد بەDSPIC30F6012-30I/PF)
تێبینییەکانی دیزاین
Estimated: at 5.0 V VDD, 40 MHz operation, and full peripheral set, the DSPIC30F6013-30I/PF draws roughly 70 mA core current (~350 mW). Add an external LDO such as the MCP1727 with a 10 uF decoupling capacitor near each VDD pin; place bulk + bypass caps within 5 mm of the package. The part's AVDD can be sourced from the same rail as VDD provided AVDD is RF-decoupled from VDD with a ferrite bead for ADC noise isolation.
Estimated: at typical 3.3 V VDD / 40 MHz operation the part dissipates roughly 220 mW. For TQFP-80 (PF) package the theta_JA is ~50 C/W on a standard 2 oz 4-layer JEDEC PCB. Junction rise = (220 mW) * (50 C/W) = 11 C above ambient, comfortably below the 85 C ceiling; no heatsink is required in industrial environments. For +85 C deployments, keep ambient below 74 C to leave headroom.
Place the 8 MHz or 10 MHz crystal within 10 mm of OSC1/OSC2, keep its trace short, and guard it with a GND ring. Route PWM outputs in matched-length pairs to the gate-driver inputs to keep dead-time balanced. The MCLR line must have a 10 kohm pull-up to VDD; do not rely on internal weak pull-up alone for production boards. Reference Microchip's dsPIC30F6011/6012/6013/6014 datasheet for full PCB layout recommendations.
Watch out for the AVSS/AVDD pin placement on TQFP-80 (PF): some PCB layouts mistakenly connect AVSS to digital ground only, which introduces ADC offset error; tie AVSS directly to the analog ground plane with a star connection. The auxiliary Flash is NOT user-replaceable EEPROM - wear-out of 2 KB auxiliary Flash can limit erase/write cycles; budget for external EEPROM like MCP24AA512 if intensive logging is needed.
زانیاری پابەندبوون
RoHS and REACH compliant per Microchip environmental statements; lead-free matte-tin terminations. The standard "-30I/PF" is not AEC-Q100 qualified; for automotive, look to AEC-Q100 grade dsPIC33 variants.