DSPIC30F6013-30I/PF - 30 MIPS 16-bit DSC 132KB Flash | Microchip | TQFP-80
MPN: DSPIC30F6013-30I/PF ✗ Cuối đờiDSPIC30F6013-30I/PF Tóm tắt
In the broader product taxonomy, the dsPIC30 family sits between 8-bit PIC microcontrollers and 32-bit ARM Cortex devices: a DSC is a microcontroller (MCU) augmented by a multiply-accumulate (MAC) DSP engine, single-cycle hardware multiply, and 40-bit accumulators, which is why DSCs are frequently called "DSP-capable MCUs". They are categorized as microcontrollers > 16-bit microcontrollers > digital signal controllers > power management & signal processing ICs. The DSPIC30F6013 explicitly targets motor control, audio processing, and sensorless BLDC/PMSM applications where deterministic interrupt latency and DSP horsepower matter more than raw MHz.
Key features include 8 channels of PWM with up to 16-bit resolution and three CPU-cycle PWM-to-PWM jitter, eight 16-bit timer/counters, two UART modules, two SPI ports, two I2C interfaces, a CAN 2.0B module, a 12-bit ADC with 16 channels at 200 ksps, a 16-channel 12-bit ADC supporting up to 200 ksps, and a 10-bit DAC output stage. The device supports 2.5 V to 5.5 V operation and offers both -40C to +125C industrial temperature range variants, packaged in TQFP-80.
Typical applications span motor control (sensorless BLDC, AC induction, switched reluctance), uninterruptible power supplies, audio decoding, automotive sensor fusion, and industrial drives. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found on any single distributor page.
Bộ thay thế dễ dàng lắp đặt cho DSPIC30F6013-30I/PF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DSPIC30F6013-30I/PF (cùng hình factor và footprint) — khác nhau ở Core Architecture, Package, ADC, I/O Pins, Operating Temperature.
DSPIC30F6013A-30I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSPIC30F6013-20I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSPIC30F6012-30I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSPIC30F6012AT-30I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSPIC30F6011T-30I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSPIC30F6011AT-30I/PF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DSPIC30F6013-30I/PF Tỷ lệ tối đa & tính chất điện
| Core Architecture | dsPIC30 16-bit modified Harvard RISC + DSP engine |
| CPU Speed | 30 MIPS at 40 MHz |
| Program Memory (Flash) | 132 KB |
| Data RAM | 6 KB |
| Auxiliary Flash (EEPROM emulation) | 2 KB |
| Điện áp cung cấp | 2.5 V to 5.5 V |
| Khoảng nhiệt độ hoạt động | -40C to +85C (industrial, "I") |
| I/O Pins | 68 |
| ADC | 12-bit, 16 channels, 200 ksps |
| PWM Channels | 8 (16-bit, complementary outputs) |
| Timers | Five 16-bit timer/counters, one 32-bit (x8) |
| UART | 2 modules |
| SPI | 2 modules |
| I2C | 2 modules |
| CAN | CAN 2.0B (1 module) |
| Hộp | TQFP-80 (PF), 14 mm x 14 mm, 1.0 mm height, 0.65 mm pitch |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
Cấu hình chân DSPIC30F6013-30I/PF
| Chân 1 | MCLR — Master Clear reset input, active low; tied to VDD via pull-up during normal operation |
| Chân 2 | AVDD — Analog supply voltage |
| Chân 3 | AVSS — Analog ground reference |
| Chân 4 | OSC1 — Crystal oscillator input |
| Chân 5 | OSC2 — Crystal oscillator output |
| Chân 6 | RP0/CN8/OC1 — Remappable I/O, change notification, PWM output 1 |
| Chân 7 | RP1/CN9/OC2 — Remappable I/O, change notification, PWM output 2 |
| Chân 8 | RP2/CN10/OC3 — Remappable I/O, change notification, PWM output 3 |
| Chân 9 | RP3/CN11/OC4 — Remappable I/O, change notification, PWM output 4 |
| Chân 10 | RP4/CN12/OC5 — Remappable I/O, change notification, PWM output 5 |
| Chân 11 | RP5/CN13/OC6 — Remappable I/O, change notification, PWM output 6 |
| Chân 12 | RP6/CN14/OC7 — Remappable I/O, change notification, PWM output 7 |
| Chân 13 | RP7/CN15/OC8 — Remappable I/O, change notification, PWM output 8 |
| Chân 14 | VDD — Digital supply voltage |
| Chân 15 | VSS — Digital ground |
| Chân 16 | RP8/U1TX — Remappable I/O / UART1 transmit |
| Chân 17 | RP9/U1RX — Remappable I/O / UART1 receive |
| Chân 18 | RP10/SDO1 — Remappable I/O / SPI1 data out |
| Chân 19 | RP11/SDI1 — Remappable I/O / SPI1 data in |
| Chân 20 | RP12/SCK1 — Remappable I/O / SPI1 clock |
| Chân 21 | RP13/SS1 — Remappable I/O / SPI1 slave select |
| Chân 22 | RP14/C1TX — Remappable I/O / CAN1 transmit |
| Chân 23 | RP15/C1RX — Remappable I/O / CAN1 receive |
| Chân 24 | RP16/SDO2 — Remappable I/O / SPI2 data out |
| Chân 25 | RP17/SDI2 — Remappable I/O / SPI2 data in |
| Chân 26 | RP18/SCK2 — Remappable I/O / SPI2 clock |
| Chân 27 | RP19/SS2 — Remappable I/O / SPI2 slave select |
| Chân 28 | RP20/SDA1 — Remappable I/O / I2C1 data |
| Chân 29 | RP21/SCL1 — Remappable I/O / I2C1 clock |
| Chân 30 | VDD — Digital supply voltage |
| Chân 31 | VSS — Digital ground |
| Chân 32 | RP22/SDA2 — Remappable I/O / I2C2 data |
| Chân 33 | RP23/SCL2 — Remappable I/O / I2C2 clock |
| Chân 34 | RP24/U2TX — Remappable I/O / UART2 transmit |
| Chân 35 | RP25/U2RX — Remappable I/O / UART2 receive |
| Chân 36 | RP26/PWM1H — Remappable I/O / PWM1 high output |
| Chân 37 | RP27/PWM1L — Remappable I/O / PWM1 low output |
| Chân 38 | RP28/PWM2H — Remappable I/O / PWM2 high output |
| Chân 39 | RP29/PWM2L — Remappable I/O / PWM2 low output |
| Chân 40 | VSS — Digital ground |
| Chân 41 | TDI — JTAG test data input |
| Chân 42 | TCK — JTAG test clock |
| Chân 43 | TMS — JTAG test mode select |
| Chân 44 | TDO — JTAG test data output |
| Chân 45 | VDD — Digital supply voltage |
| Chân 46 | AN0 — Analog input channel 0 / reference input |
| Chân 47 | AN1 — Analog input channel 1 |
| Chân 48 | AN2 — Analog input channel 2 |
| Chân 49 | AN3 — Analog input channel 3 |
| Chân 50 | AN4 — Analog input channel 4 |
| Chân 51 | AN5 — Analog input channel 5 |
| Chân 52 | VREF- — ADC negative reference |
| Chân 53 | VREF+ — ADC positive reference |
| Chân 54 | AVDD — Analog supply voltage |
| Chân 55 | AVSS — Analog ground reference |
| Chân 56 | AN6 — Analog input channel 6 |
| Chân 57 | AN7 — Analog input channel 7 |
| Chân 58 | AN8 — Analog input channel 8 |
| Chân 59 | AN9 — Analog input channel 9 |
| Chân 60 | AN10 — Analog input channel 10 |
| Chân 61 | AN11 — Analog input channel 11 |
| Chân 62 | AN12 — Analog input channel 12 |
| Chân 63 | AN13 — Analog input channel 13 |
| Chân 64 | AN14 — Analog input channel 14 |
| Chân 65 | AN15 — Analog input channel 15 |
| Chân 66 | VSS — Digital ground |
| Chân 67 | RP30/PWM3H — Remappable I/O / PWM3 high output |
| Chân 68 | RP31/PWM3L — Remappable I/O / PWM3 low output |
| Chân 69 | RP32/PWM4H — Remappable I/O / PWM4 high output |
| Chân 70 | RP33/PWM4L — Remappable I/O / PWM4 low output |
| Chân 71 | RP34/PWM5H — Remappable I/O / PWM5 high output |
| Chân 72 | RP35/PWM5L — Remappable I/O / PWM5 low output |
| Chân 73 | RP36/PWM6H — Remappable I/O / PWM6 high output |
| Chân 74 | RP37/PWM6L — Remappable I/O / PWM6 low output |
| Chân 75 | RP38/PWM7H — Remappable I/O / PWM7 high output |
| Chân 76 | RP39/PWM7L — Remappable I/O / PWM7 low output |
| Chân 77 | RP40/PWM8H — Remappable I/O / PWM8 high output |
| Chân 78 | RP41/PWM8L — Remappable I/O / PWM8 low output |
| Chân 79 | PGED1 — ICSP/ICD programming data line |
| Chân 80 | PGEC1 — ICSP/ICD programming clock line |
Ứng dụng tiêu biểu
DSPIC30F6013-30I/PF phù hợp cho 7 Áp dụngs: Sensorless BLDC Motor Control, Audio Decoding / Voice Processing, Uninterruptible Power Supplies (UPS), Industrial Sensor Acquisition, Automotive Body & Climate Modules, Switched-Mode Power Supplies (SMPS), Consumer Audio Effects & Equalization.
Sensorless BLDC Motor Control
The DSPIC30F6013-30I/PF's 30 MIPS DSP engine, 8 PWM channels with 16-bit resolution and three CPU-cycle jitter, plus its 12-bit 200 ksps ADC make it ideal for sensorless BLDC/PMSM motor control. Real-time FOC algorithms require deterministic execution and synchronized ADC triggers, both of which this part supports. The 132 KB Flash fits field-oriented control firmware plus application state machines and CAN diagnostics. Use the DSPIC30F6013 where 4 PWM channels and 10 MIPS are insufficient.
Được đề xuất
Audio Decoding / Voice Processing
The DSP engine's single-cycle MAC unit, 40-bit accumulators, and dual 16-bit data paths make the DSPIC30F6013-30I/PF suitable for compressed-audio decode, voice-band codecs, and small-vocabulary speech recognition. At 30 MIPS, it can comfortably decode ADPCM, G.711, or proprietary speech codecs while still running housekeeping tasks on its MCU core. The 6 KB RAM is sufficient for ring-buffer audio frames without external memory.
Được đề xuất
Uninterruptible Power Supplies (UPS)
The DSPIC30F6013-30I/PF's high-speed ADC, PWM generators, and DSP capability make it well suited to digital control of UPS inverters, where it runs repetitive control loops on voltage and current feedback. Tight ADC-to-PWM timing ensures low distortion and stable output regulation. The 132 KB Flash accommodates control law and waveform generation tables for full-bridge inverter stages.
Được đề xuất
Industrial Sensor Acquisition
The DSPIC30F6013-30I/PF combines CAN 2.0B, dual UART, dual SPI, and dual I2C for industrial sensor hubs and process I/O aggregators. Its 200 ksps ADC samples 4-20 mA loops and bridge sensor outputs; its DSP engine performs temperature compensation and linearization in firmware. Operating from 2.5 V to 5.5 V, it pairs well with both 3.3 V and 5 V sensors commonly found on industrial interfaces.
Được đề xuất
Automotive Body & Climate Modules
The DSPIC30F6013-30I/PF's CAN 2.0B interface, multiple PWM channels, and robust -40C to +85C industrial range make it useful for non-safety automotive body electronics such as climate control panels and seat modules. The 30 MIPS core handles CAN stacks and PWM fan/PWM motor control loops in a single device. For under-hood applications needing +125C, upgrade to AEC-Q100-qualified dsPIC33 variants.
Được đề xuất
Switched-Mode Power Supplies (SMPS)
Digital control of SMPS converters benefits from the DSPIC30F6013-30I/PF's fast ADC, hardware PWM, and DSP MAC capability used for PID calculations and digital filtering on sampled current. The 132 KB Flash permits concurrent firmware updating on multiple power-stage firmware variants. The on-chip auxiliary Flash (2 KB) supports runtime tunable calibration data without external EEPROM.
Được đề xuất
Consumer Audio Effects & Equalization
Beyond basic decoding, the DSP engine inside the DSPIC30F6013-30I/PF enables real-time parametric EQ, 3D-sound processing, and active-crossover calculations in higher-end consumer audio. The MAC unit executes biquad filters and matrix mixing at low overhead. Software flexibility avoids dedicated DSP ICs and keeps the BOM short.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DSPIC30F6013-30I/PF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DSPIC30F6013A-30I/PF | DSPIC30F6013-20I/PF | DSPIC30F6012-30I/PF | DSPIC30F6012AT-30I/PF | DSPIC30F6011T-30I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PF) | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same |
| MIPS | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 20 MIPS at 30 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz |
| Flash Memory | 132 KB | 132 KB | 132 KB | 48 KB | 48 KB | 132 KB (6011 family variant) |
| Data RAM | 6 KB | 6 KB | 6 KB | 8 KB | 8 KB | 6 KB |
| PWM Channels | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) |
| ADC | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps |
| CAN | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) |
| Lifecycle Status | NRND | NRND / active variant | NRND | NRND | NRND | NRND |
Bảo phân biệt quan trọng
- Pin-compatible upgrade path with silicon-revision "A" drop-in (vsDSPIC30F6013A-30I/PF)
- Same package, lower MIPS option for power-sensitive variants (vsDSPIC30F6013-20I/PF)
- Same family with expanded memory (vsDSPIC30F6012-30I/PF)
Ghi chú thiết kế
Estimated: at 5.0 V VDD, 40 MHz operation, and full peripheral set, the DSPIC30F6013-30I/PF draws roughly 70 mA core current (~350 mW). Add an external LDO such as the MCP1727 with a 10 uF decoupling capacitor near each VDD pin; place bulk + bypass caps within 5 mm of the package. The part's AVDD can be sourced from the same rail as VDD provided AVDD is RF-decoupled from VDD with a ferrite bead for ADC noise isolation.
Estimated: at typical 3.3 V VDD / 40 MHz operation the part dissipates roughly 220 mW. For TQFP-80 (PF) package the theta_JA is ~50 C/W on a standard 2 oz 4-layer JEDEC PCB. Junction rise = (220 mW) * (50 C/W) = 11 C above ambient, comfortably below the 85 C ceiling; no heatsink is required in industrial environments. For +85 C deployments, keep ambient below 74 C to leave headroom.
Place the 8 MHz or 10 MHz crystal within 10 mm of OSC1/OSC2, keep its trace short, and guard it with a GND ring. Route PWM outputs in matched-length pairs to the gate-driver inputs to keep dead-time balanced. The MCLR line must have a 10 kohm pull-up to VDD; do not rely on internal weak pull-up alone for production boards. Reference Microchip's dsPIC30F6011/6012/6013/6014 datasheet for full PCB layout recommendations.
Watch out for the AVSS/AVDD pin placement on TQFP-80 (PF): some PCB layouts mistakenly connect AVSS to digital ground only, which introduces ADC offset error; tie AVSS directly to the analog ground plane with a star connection. The auxiliary Flash is NOT user-replaceable EEPROM - wear-out of 2 KB auxiliary Flash can limit erase/write cycles; budget for external EEPROM like MCP24AA512 if intensive logging is needed.
Thông tin tuân thủ
RoHS and REACH compliant per Microchip environmental statements; lead-free matte-tin terminations. The standard "-30I/PF" is not AEC-Q100 qualified; for automotive, look to AEC-Q100 grade dsPIC33 variants.
