DSPIC30F6013-30I/PF - 30 MIPS 16-bit DSC 132KB Flash | Microchip | TQFP-80
MPN: DSPIC30F6013-30I/PF ✗ انتهى عمره الإنتاجيDSPIC30F6013-30I/PF نظرة عامة
In the broader product taxonomy, the dsPIC30 family sits between 8-bit PIC microcontrollers and 32-bit ARM Cortex devices: a DSC is a microcontroller (MCU) augmented by a multiply-accumulate (MAC) DSP engine, single-cycle hardware multiply, and 40-bit accumulators, which is why DSCs are frequently called "DSP-capable MCUs". They are categorized as microcontrollers > 16-bit microcontrollers > digital signal controllers > power management & signal processing ICs. The DSPIC30F6013 explicitly targets motor control, audio processing, and sensorless BLDC/PMSM applications where deterministic interrupt latency and DSP horsepower matter more than raw MHz.
Key features include 8 channels of PWM with up to 16-bit resolution and three CPU-cycle PWM-to-PWM jitter, eight 16-bit timer/counters, two UART modules, two SPI ports, two I2C interfaces, a CAN 2.0B module, a 12-bit ADC with 16 channels at 200 ksps, a 16-channel 12-bit ADC supporting up to 200 ksps, and a 10-bit DAC output stage. The device supports 2.5 V to 5.5 V operation and offers both -40C to +125C industrial temperature range variants, packaged in TQFP-80.
Typical applications span motor control (sensorless BLDC, AC induction, switched reluctance), uninterruptible power supplies, audio decoding, automotive sensor fusion, and industrial drives. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found on any single distributor page.
بدائل مباشرة لـ DSPIC30F6013-30I/PF — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع DSPIC30F6013-30I/PF (نفس عامل الشكل والبصمة) — يختلف في Core Architecture, Package, ADC, I/O Pins, Operating Temperature.
DSPIC30F6013A-30I/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6013-20I/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6012-30I/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6012AT-30I/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6011T-30I/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6011AT-30I/PF
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
DSPIC30F6013-30I/PF الحدود القصوى والخصائص الكهربائية
| Core Architecture | dsPIC30 16-bit modified Harvard RISC + DSP engine |
| CPU Speed | 30 MIPS at 40 MHz |
| Program Memory (Flash) | 132 KB |
| Data RAM | 6 KB |
| Auxiliary Flash (EEPROM emulation) | 2 KB |
| جهد التغذية | 2.5 V to 5.5 V |
| نطاق درجة حرارة التشغيل | -40C to +85C (industrial, "I") |
| I/O Pins | 68 |
| ADC | 12-bit, 16 channels, 200 ksps |
| PWM Channels | 8 (16-bit, complementary outputs) |
| Timers | Five 16-bit timer/counters, one 32-bit (x8) |
| UART | 2 modules |
| SPI | 2 modules |
| I2C | 2 modules |
| CAN | CAN 2.0B (1 module) |
| العلبة | TQFP-80 (PF), 14 mm x 14 mm, 1.0 mm height, 0.65 mm pitch |
| نوع التركيب | Surface Mount |
| حالة RoHS | Compliant |
تكوين أطراف DSPIC30F6013-30I/PF
| دبوس 1 | MCLR — Master Clear reset input, active low; tied to VDD via pull-up during normal operation |
| دبوس 2 | AVDD — Analog supply voltage |
| دبوس 3 | AVSS — Analog ground reference |
| دبوس 4 | OSC1 — Crystal oscillator input |
| دبوس 5 | OSC2 — Crystal oscillator output |
| دبوس 6 | RP0/CN8/OC1 — Remappable I/O, change notification, PWM output 1 |
| دبوس 7 | RP1/CN9/OC2 — Remappable I/O, change notification, PWM output 2 |
| دبوس 8 | RP2/CN10/OC3 — Remappable I/O, change notification, PWM output 3 |
| دبوس 9 | RP3/CN11/OC4 — Remappable I/O, change notification, PWM output 4 |
| دبوس 10 | RP4/CN12/OC5 — Remappable I/O, change notification, PWM output 5 |
| دبوس 11 | RP5/CN13/OC6 — Remappable I/O, change notification, PWM output 6 |
| دبوس 12 | RP6/CN14/OC7 — Remappable I/O, change notification, PWM output 7 |
| دبوس 13 | RP7/CN15/OC8 — Remappable I/O, change notification, PWM output 8 |
| دبوس 14 | VDD — Digital supply voltage |
| دبوس 15 | VSS — Digital ground |
| دبوس 16 | RP8/U1TX — Remappable I/O / UART1 transmit |
| دبوس 17 | RP9/U1RX — Remappable I/O / UART1 receive |
| دبوس 18 | RP10/SDO1 — Remappable I/O / SPI1 data out |
| دبوس 19 | RP11/SDI1 — Remappable I/O / SPI1 data in |
| دبوس 20 | RP12/SCK1 — Remappable I/O / SPI1 clock |
| دبوس 21 | RP13/SS1 — Remappable I/O / SPI1 slave select |
| دبوس 22 | RP14/C1TX — Remappable I/O / CAN1 transmit |
| دبوس 23 | RP15/C1RX — Remappable I/O / CAN1 receive |
| دبوس 24 | RP16/SDO2 — Remappable I/O / SPI2 data out |
| دبوس 25 | RP17/SDI2 — Remappable I/O / SPI2 data in |
| دبوس 26 | RP18/SCK2 — Remappable I/O / SPI2 clock |
| دبوس 27 | RP19/SS2 — Remappable I/O / SPI2 slave select |
| دبوس 28 | RP20/SDA1 — Remappable I/O / I2C1 data |
| دبوس 29 | RP21/SCL1 — Remappable I/O / I2C1 clock |
| دبوس 30 | VDD — Digital supply voltage |
| دبوس 31 | VSS — Digital ground |
| دبوس 32 | RP22/SDA2 — Remappable I/O / I2C2 data |
| دبوس 33 | RP23/SCL2 — Remappable I/O / I2C2 clock |
| دبوس 34 | RP24/U2TX — Remappable I/O / UART2 transmit |
| دبوس 35 | RP25/U2RX — Remappable I/O / UART2 receive |
| دبوس 36 | RP26/PWM1H — Remappable I/O / PWM1 high output |
| دبوس 37 | RP27/PWM1L — Remappable I/O / PWM1 low output |
| دبوس 38 | RP28/PWM2H — Remappable I/O / PWM2 high output |
| دبوس 39 | RP29/PWM2L — Remappable I/O / PWM2 low output |
| دبوس 40 | VSS — Digital ground |
| دبوس 41 | TDI — JTAG test data input |
| دبوس 42 | TCK — JTAG test clock |
| دبوس 43 | TMS — JTAG test mode select |
| دبوس 44 | TDO — JTAG test data output |
| دبوس 45 | VDD — Digital supply voltage |
| دبوس 46 | AN0 — Analog input channel 0 / reference input |
| دبوس 47 | AN1 — Analog input channel 1 |
| دبوس 48 | AN2 — Analog input channel 2 |
| دبوس 49 | AN3 — Analog input channel 3 |
| دبوس 50 | AN4 — Analog input channel 4 |
| دبوس 51 | AN5 — Analog input channel 5 |
| دبوس 52 | VREF- — ADC negative reference |
| دبوس 53 | VREF+ — ADC positive reference |
| دبوس 54 | AVDD — Analog supply voltage |
| دبوس 55 | AVSS — Analog ground reference |
| دبوس 56 | AN6 — Analog input channel 6 |
| دبوس 57 | AN7 — Analog input channel 7 |
| دبوس 58 | AN8 — Analog input channel 8 |
| دبوس 59 | AN9 — Analog input channel 9 |
| دبوس 60 | AN10 — Analog input channel 10 |
| دبوس 61 | AN11 — Analog input channel 11 |
| دبوس 62 | AN12 — Analog input channel 12 |
| دبوس 63 | AN13 — Analog input channel 13 |
| دبوس 64 | AN14 — Analog input channel 14 |
| دبوس 65 | AN15 — Analog input channel 15 |
| دبوس 66 | VSS — Digital ground |
| دبوس 67 | RP30/PWM3H — Remappable I/O / PWM3 high output |
| دبوس 68 | RP31/PWM3L — Remappable I/O / PWM3 low output |
| دبوس 69 | RP32/PWM4H — Remappable I/O / PWM4 high output |
| دبوس 70 | RP33/PWM4L — Remappable I/O / PWM4 low output |
| دبوس 71 | RP34/PWM5H — Remappable I/O / PWM5 high output |
| دبوس 72 | RP35/PWM5L — Remappable I/O / PWM5 low output |
| دبوس 73 | RP36/PWM6H — Remappable I/O / PWM6 high output |
| دبوس 74 | RP37/PWM6L — Remappable I/O / PWM6 low output |
| دبوس 75 | RP38/PWM7H — Remappable I/O / PWM7 high output |
| دبوس 76 | RP39/PWM7L — Remappable I/O / PWM7 low output |
| دبوس 77 | RP40/PWM8H — Remappable I/O / PWM8 high output |
| دبوس 78 | RP41/PWM8L — Remappable I/O / PWM8 low output |
| دبوس 79 | PGED1 — ICSP/ICD programming data line |
| دبوس 80 | PGEC1 — ICSP/ICD programming clock line |
التطبيقات النموذجية
DSPIC30F6013-30I/PF مناسب لـ 7 التطبيقs: Sensorless BLDC Motor Control, Audio Decoding / Voice Processing, Uninterruptible Power Supplies (UPS), Industrial Sensor Acquisition, Automotive Body & Climate Modules, Switched-Mode Power Supplies (SMPS), Consumer Audio Effects & Equalization.
Sensorless BLDC Motor Control
The DSPIC30F6013-30I/PF's 30 MIPS DSP engine, 8 PWM channels with 16-bit resolution and three CPU-cycle jitter, plus its 12-bit 200 ksps ADC make it ideal for sensorless BLDC/PMSM motor control. Real-time FOC algorithms require deterministic execution and synchronized ADC triggers, both of which this part supports. The 132 KB Flash fits field-oriented control firmware plus application state machines and CAN diagnostics. Use the DSPIC30F6013 where 4 PWM channels and 10 MIPS are insufficient.
موصى به
Audio Decoding / Voice Processing
The DSP engine's single-cycle MAC unit, 40-bit accumulators, and dual 16-bit data paths make the DSPIC30F6013-30I/PF suitable for compressed-audio decode, voice-band codecs, and small-vocabulary speech recognition. At 30 MIPS, it can comfortably decode ADPCM, G.711, or proprietary speech codecs while still running housekeeping tasks on its MCU core. The 6 KB RAM is sufficient for ring-buffer audio frames without external memory.
موصى به
Uninterruptible Power Supplies (UPS)
The DSPIC30F6013-30I/PF's high-speed ADC, PWM generators, and DSP capability make it well suited to digital control of UPS inverters, where it runs repetitive control loops on voltage and current feedback. Tight ADC-to-PWM timing ensures low distortion and stable output regulation. The 132 KB Flash accommodates control law and waveform generation tables for full-bridge inverter stages.
موصى به
Industrial Sensor Acquisition
The DSPIC30F6013-30I/PF combines CAN 2.0B, dual UART, dual SPI, and dual I2C for industrial sensor hubs and process I/O aggregators. Its 200 ksps ADC samples 4-20 mA loops and bridge sensor outputs; its DSP engine performs temperature compensation and linearization in firmware. Operating from 2.5 V to 5.5 V, it pairs well with both 3.3 V and 5 V sensors commonly found on industrial interfaces.
موصى به
Automotive Body & Climate Modules
The DSPIC30F6013-30I/PF's CAN 2.0B interface, multiple PWM channels, and robust -40C to +85C industrial range make it useful for non-safety automotive body electronics such as climate control panels and seat modules. The 30 MIPS core handles CAN stacks and PWM fan/PWM motor control loops in a single device. For under-hood applications needing +125C, upgrade to AEC-Q100-qualified dsPIC33 variants.
موصى به
Switched-Mode Power Supplies (SMPS)
Digital control of SMPS converters benefits from the DSPIC30F6013-30I/PF's fast ADC, hardware PWM, and DSP MAC capability used for PID calculations and digital filtering on sampled current. The 132 KB Flash permits concurrent firmware updating on multiple power-stage firmware variants. The on-chip auxiliary Flash (2 KB) supports runtime tunable calibration data without external EEPROM.
موصى به
Consumer Audio Effects & Equalization
Beyond basic decoding, the DSP engine inside the DSPIC30F6013-30I/PF enables real-time parametric EQ, 3D-sound processing, and active-crossover calculations in higher-end consumer audio. The MAC unit executes biquad filters and matrix mixing at low overhead. Software flexibility avoids dedicated DSP ICs and keeps the BOM short.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ DSPIC30F6013-30I/PF — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | DSPIC30F6013A-30I/PF | DSPIC30F6013-20I/PF | DSPIC30F6012-30I/PF | DSPIC30F6012AT-30I/PF | DSPIC30F6011T-30I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PF) | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same |
| MIPS | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 20 MIPS at 30 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz |
| Flash Memory | 132 KB | 132 KB | 132 KB | 48 KB | 48 KB | 132 KB (6011 family variant) |
| Data RAM | 6 KB | 6 KB | 6 KB | 8 KB | 8 KB | 6 KB |
| PWM Channels | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) |
| ADC | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps |
| CAN | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) |
| Lifecycle Status | NRND | NRND / active variant | NRND | NRND | NRND | NRND |
أبرز الفروقات
- Pin-compatible upgrade path with silicon-revision "A" drop-in (مقابلDSPIC30F6013A-30I/PF)
- Same package, lower MIPS option for power-sensitive variants (مقابلDSPIC30F6013-20I/PF)
- Same family with expanded memory (مقابلDSPIC30F6012-30I/PF)
ملاحظات التصميم
Estimated: at 5.0 V VDD, 40 MHz operation, and full peripheral set, the DSPIC30F6013-30I/PF draws roughly 70 mA core current (~350 mW). Add an external LDO such as the MCP1727 with a 10 uF decoupling capacitor near each VDD pin; place bulk + bypass caps within 5 mm of the package. The part's AVDD can be sourced from the same rail as VDD provided AVDD is RF-decoupled from VDD with a ferrite bead for ADC noise isolation.
Estimated: at typical 3.3 V VDD / 40 MHz operation the part dissipates roughly 220 mW. For TQFP-80 (PF) package the theta_JA is ~50 C/W on a standard 2 oz 4-layer JEDEC PCB. Junction rise = (220 mW) * (50 C/W) = 11 C above ambient, comfortably below the 85 C ceiling; no heatsink is required in industrial environments. For +85 C deployments, keep ambient below 74 C to leave headroom.
Place the 8 MHz or 10 MHz crystal within 10 mm of OSC1/OSC2, keep its trace short, and guard it with a GND ring. Route PWM outputs in matched-length pairs to the gate-driver inputs to keep dead-time balanced. The MCLR line must have a 10 kohm pull-up to VDD; do not rely on internal weak pull-up alone for production boards. Reference Microchip's dsPIC30F6011/6012/6013/6014 datasheet for full PCB layout recommendations.
Watch out for the AVSS/AVDD pin placement on TQFP-80 (PF): some PCB layouts mistakenly connect AVSS to digital ground only, which introduces ADC offset error; tie AVSS directly to the analog ground plane with a star connection. The auxiliary Flash is NOT user-replaceable EEPROM - wear-out of 2 KB auxiliary Flash can limit erase/write cycles; budget for external EEPROM like MCP24AA512 if intensive logging is needed.
معلومات الامتثال
RoHS and REACH compliant per Microchip environmental statements; lead-free matte-tin terminations. The standard "-30I/PF" is not AEC-Q100 qualified; for automotive, look to AEC-Q100 grade dsPIC33 variants.
