BTS3035TFATMA1 vs BTS428L2ATMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS3035TFATMA1 द्वारा Infineon और BTS428L2ATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS3035TFATMA1 BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 ✓ सक्रिय
Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS3035TFATMA1 BTS428L2ATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Low-Side Power Switch Smart High-Side Power Switch
Technology N-Channel MOSFET Smart SIPMOS (vertical N-channel MOSFET with charge pump)
Number of Channels 1 1
Input Type CMOS Logic Level CMOS-compatible, ground-referenced
Continuous Drain Current 5 A —
On-Resistance (RDS(on)) 30 mOhm (typical) —
Drain-Source Voltage (VDS) Max 40 V —
Operating Voltage Range 12 V nominal (load-dump tolerant to 40 V) —
Fault Protection Over-current, Short-circuit, Over-temperature, ESD —
Status Feedback Yes (open-drain diagnostic output) —
Reverse Battery Protection Integrated —
ऑपरेटिंग तापमान रेंज -40C to +150C (junction) [DATA_NEEDED: min/max]
पैकेज PG-TO252-3-313 (DPAK) PG-TO252-5-11 (DPAK-5, 4 leads + tab)
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर [DATA_NEEDED: MSL moisture sensitivity level] —
RoHS स्थिति Compliant —
Automotive Grade AEC-Q100 qualified —
On-State Resistance (R_DS(on)) — 50 mOhm (typical)
Continuous Load Current — 5.8 A
ऑपरेटिंग सप्लाई वोल्टेज — [DATA_NEEDED: nominal and range]
Standby Current — Very low (per datasheet)
Overvoltage Protection — Load-dump / overvoltage clamp
Overtemperature Protection — Yes, with autorestart
Diagnostic Feedback — Yes (open-load, short-circuit, overtemperature)
RoHS / Pb-Free — Yes (Green product, Pb-free finish, J-STD-020)
Soldering — Pb-free reflow per IPC/JEDEC J-STD-020
Qualification — Automotive-grade (PROFET family)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध