BTS3035TFATMA1 vs BTS428L2ATMA1 موازنہ

تفصیلی ساتھ ساتھ موازنہ از BTS3035TFATMA1 بذریعہ Infineon اور BTS428L2ATMA1 بذریعہ Infineon. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

Infineon
BTS3035TFATMA1 BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 ✓ فعال
Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ فعال

خصوصیات کا موازنہ

پیرامیٹر BTS3035TFATMA1 BTS428L2ATMA1
برانڈ Infineon Infineon
زمرہ Power MOSFET Drivers Power MOSFET Drivers
لائف سائیکل کی حالت فعال فعال
Product Type Low-Side Power Switch Smart High-Side Power Switch
Technology N-Channel MOSFET Smart SIPMOS (vertical N-channel MOSFET with charge pump)
Number of Channels 1 1
Input Type CMOS Logic Level CMOS-compatible, ground-referenced
Continuous Drain Current 5 A —
On-Resistance (RDS(on)) 30 mOhm (typical) —
Drain-Source Voltage (VDS) Max 40 V —
Operating Voltage Range 12 V nominal (load-dump tolerant to 40 V) —
Fault Protection Over-current, Short-circuit, Over-temperature, ESD —
Status Feedback Yes (open-drain diagnostic output) —
Reverse Battery Protection Integrated —
آپریٹنگ درجہ حرارت رینج -40C to +150C (junction) [DATA_NEEDED: min/max]
پیکیج PG-TO252-3-313 (DPAK) PG-TO252-5-11 (DPAK-5, 4 leads + tab)
ماؤنٹنگ ٹائپ Surface Mount Surface Mount
MSL لیول [DATA_NEEDED: MSL moisture sensitivity level] —
RoHS اسٹیٹس Compliant —
Automotive Grade AEC-Q100 qualified —
On-State Resistance (R_DS(on)) — 50 mOhm (typical)
Continuous Load Current — 5.8 A
آپریٹنگ سپلائی وولٹیج — [DATA_NEEDED: nominal and range]
Standby Current — Very low (per datasheet)
Overvoltage Protection — Load-dump / overvoltage clamp
Overtemperature Protection — Yes, with autorestart
Diagnostic Feedback — Yes (open-load, short-circuit, overtemperature)
RoHS / Pb-Free — Yes (Green product, Pb-free finish, J-STD-020)
Soldering — Pb-free reflow per IPC/JEDEC J-STD-020
Qualification — Automotive-grade (PROFET family)

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں