BTS3035TFATMA1 vs BTS428L2ATMA1 比較
詳細並排比較 BTS3035TFATMA1 由 Infineon 與 BTS428L2ATMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTS3035TFATMA1 | BTS428L2ATMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Low-Side Power Switch | Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Number of Channels | 1 | 1 |
| Input Type | CMOS Logic Level | CMOS-compatible, ground-referenced |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| 工作溫度範圍 | -40C to +150C (junction) | [DATA_NEEDED: min/max] |
| 封裝 | PG-TO252-3-313 (DPAK) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| 安裝類型 | Surface Mount | Surface Mount |
| MSL 等級 | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS 狀態 | Compliant | — |
| Automotive Grade | AEC-Q100 qualified | — |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| 工作電源電壓 | — | [DATA_NEEDED: nominal and range] |
| Standby Current | — | Very low (per datasheet) |
| Overvoltage Protection | — | Load-dump / overvoltage clamp |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |